Problem with correlation on QA systems

Hi all
i need help!!!
I have a problem with correlation on QA systems!!!!
I have exported file (SCVW and CS) from DEV system and imported into QAL system!
I ve changed the parameters of CCs!!
But messages on sxi_moni doesn't meet correlation!!!!
The same interface on DEV system work fine, everything it's ok!!!
Everyone can help me? What could be the problem?
Tnx all

Hi Prateek
Scheduled Background Job for Event Queue has a red flag in QA, while all flags are green on Dev!!!
What I sholud do?

Similar Messages

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

"Problem with printer or ink system"

Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.

Hi andre2015,
Please perform the steps from the link below and this will resolve the issue.
http://support.hp.com/us-en/document/c03253201
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
Regards
Aneesh

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help me

I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm!

Error Message: "Printer Failure" Problem with print or ink system . . .

Greetings!
I wasn't exactly sure where to post this, but the error message refers to printer or ink system failure so I thought this was a good place. I've been troubleshooting my parents HP OfficeJet Pro 8600 AiO for the last 2 or 3 hours with little success. I've contacted HP tech support but they wanted $200 for the work to be done and neither I nor my parents, who are retired and on a fixed income, have the money to spare.
The tech support people said it was probably a problem with the drivers, so I attempted to reinstall the software, but that didn't help at all. A brief description of the problem might shed some light on this awful situation. Since this morning, my father tried to print something and the printer itself gave the following error message on the front LCD panel on the device itself (ie, not on Windows, but on the printer's display):
"Printer Failure
There is a problem with the printer or ink system. Turn it off, then on. If the problem persists, contact HP."
Obviously my first course of action was to follow the directions. I turned it off, unplugged the cord, waited approx. 30 seconds, replugged it in and turned it back on. Nothing changed. I've also tried removing and replacing the Ink cartridges, checking the tray for a paper jam or shortage and performing a rain dance in the hopes of attracting the gods' attention xP. In short, I'm at my wits end and don't know where to go from here.
I'm unable to access the device's LCD display control panel, which controls the printer, as the error message cannot be closed. I've tried restarting the PC as well, and a lot of other basic deductive troubleshooting procedures to no avail (forgive my overuse of cliches).
Any help would be appreciated. Thank you very much in advance. I wish you all a great day, and may the god of printing protect you from the same situation. I can assure you it's most unpleasant.
Regards, Sean (frosztbyte)
P.S. I'm not sure what other information might be needed in order to help me, but ask and you shall receive any I can find.

Hi frosztbyte,
I understand your parents have an OfficeJet Pro 8600 that is saying it has a printer failure, that you have thus far not been able to clear, despite your best effort and a rain dance (at least I know who to blame for the rain now ). I would be happy to help you as best I can!
The first thing I'd suggest you do is plug the printer directly to a wall outlet if it isn't already plugged to one, just to ensure the printer is getting all the power it needs to function properly. If that doesn't seem to change anything though, please have a look through this A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document (it was steps for the same error without an error code as well) and hopefully it can help resolve the issue.
If the issue persists after trying the wall outlet and that document I would advise you try call HP again. I believe the number you called previously may have not have been HP, but another company. If you're in North America just call 1-800-474-6836, and if you're anywhere else have a look at this Contact HP Worldwide page to see what number to call for your area.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Problem with boot / new install system ond SSD

Hi guys,
I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
I have problem with boot when I dont have connected HDD to usb.
My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
Logs after boot.
Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
Feb 26 16:46:39 arch systemd[1]: Started Login Service.
Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
Feb 26 16:46:40 arch systemd[1]: Starting Network.
Feb 26 16:46:40 arch systemd[1]: Reached target Network.
Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
Feb 26 16:46:41 arch kernel: Stack:
Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
Feb 26 16:46:41 arch kernel: Call Trace:
Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
Feb 26 16:46:52 arch kernel: wlp2s0: associated
Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
Feb 26 16:46:55 arch systemd[1477]: Starting Default.
Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
[xx@arch Desktop]$ uname -a
Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
Could you please someone help me with this?
Thanks

Sorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
I thought this was a kernel issue related to this:
https://lkml.org/lkml/2014/3/10/359
I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
Here's the part from `dmesg` where it borks:
[ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
[ 3.281266] Oops: 0000 [#1] PREEMPT SMP
[ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
[ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
[ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
[ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
[ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
[ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
[ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
[ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
[ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
[ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
[ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
[ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
[ 3.281820] Stack:
[ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
[ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
[ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
[ 3.392372] Call Trace:
[ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
[ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
[ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
[ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
[ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
[ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
[ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
[ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
[ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
[ 3.508083] random: nonblocking pool is initialized
[ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
[ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
[ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
[ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
[ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
[ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
[ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.556729] RSP <ffff8800c97f1c10>
[ 3.556729] CR2: 0000000000000000
[ 3.563412] ---[ end trace 590b482a8704c6ac ]---
[ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's the output on a good boot:
[ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.434861] mousedev: PS/2 mouse device common for all mice
[ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's my mkinitcpio.conf
: grep -v ^\# /etc/mkinitcpio.conf
MODULES="atkbd psmouse"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Last edited by corpdecker (2014-03-19 02:47:30)

Problem with Correlations/BPM

Hello,
we have a problem with our PI 7.1.
We have created a ccBPM-Process with one correlation. The process is activated and runs quite good.
The Problem is in the last step (its a receive-step) which uses a correlation.
If we send the message, with the correlation into the process, we get an error of type (permanent error in inbound processing).
Now, when we look into the queue-item (which contains the error) (smq2) we can see, that the generated proxy contains elements of an old data-type, which is already deleted.
Thanks for your help.
Edited by: Thorsten Gawantka on Oct 2, 2008 3:26 PM

Hi Thorsten,
Run RSWF_CRL_MAINTAIN to check active correlations.
Then, run SWWL leaving blank all the fields (ID, Type, status ....)
Check if there is any work item stuck. Delete all the items.
Refresh all the caches.
Go to SXI_CACHE and check That your Integration Process has the active version that you wish.
Check return code is 0.
Carlos

Windows 7 problem with EFS (Encrypting file system)

Hello colleagues!
I think this topic is related more to the security.
The problem is a bit unusual and google doesn't give me a clear answers, but maybe anyone came across
with similar problem...
In general, I suspect that my problem is EFS (Encrypting file system), ie
service that automatically encrypts files using a digital signature (certificate).
A little background:
- On the work PC it was necessary to reinstall
the system, according to corporate rules all the content we have is encrypted using EFS (Encrypted files are highlighted with green color as you know).
I have copied all the data on a portable drive and also copied the certificates (certmgr.msc).
The system was reinstalled. The only change - it was x32 and became x64.
- It was necessary to free up some space on the hard drive (the file
system on it is NTFS), so, I temporary copied all the files on my home PC. My work certificate was installed on it too, because
I work from home
sometimes.
When the work PC was repaired, I've moved all the files back in
the same way (ie on the portable HDD, then to the work PC).
All files were working, but when I needed MS Word documents, it became clear that something was wrong.
When I've opened the document, it gaveme a window with weird symbols and prompts me to select the encoding ... of course -
no encoding was fit.
Started to explore all the documents, it appears that some part of them were working,
someof them not - all the old documents were working, ie the ones, which
were created before deploying EFS (newly created or copied files immediately encrypted).
So, now I am sure that the
documents were somehow re-encrypted, at least on a portable hard drive, they do not look as encrypted (not highlighted in green), but it's still not open.
Completely stopped opening all the documents that have
been encrypted (for all types of files, ie it is not just an MS Word, but also pdf, presentations, charts, and even the pictures).
Tell me, who faced similar?
How can it all back? I have no possibility to restore those documents from another sources.

Try copy those corrupted files and make sure you are using the same certificate and then re-encrypt the copied files and try decrypt them.
If possible, use the same account as you used for encryption.

Problem with show data of system R/3

Hi all,
I have a proyect with web dynpro, and i like get data of system R/3. I get this data with the connection JCO.
I have make all steps for crate the web dynpro and i see the application when deploy and run, but data of system R/3 i not see.
I have created a connection with Jco in Web dynpro Administrator and the test is good.
How can i make for get the data in the table of webdynpro?
Thanks in advance.
Vicente Zaragoza.

Hi,
You mentioned that there is no problem with JCO connection, if it is so then you should check the mapping of attributes to to UI elements (Usually you will map Model(BAPI) to coustom controller and coustom controllet to View Check are you mapping attributes, then In view you should map UI elements to attriburtes(Value attributr/value node depending on the context).
And check in coustom controller's source code you are excuting a function module (Method to call function module /BAPI) and in WDINit method creat function module object similar to below mentioned code
Bapi_Persdata_Getdetailedlist_Input bapiInput = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(bapiInput);
in view invoke this method
for a specific tutorial follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq
How to access R/3 Backend in Web Dynpro?
Hope your problem solved
Regards,
RK

Problem with JBL On Time system

I purchased a JBL On Time player - very cool looking - but there is a major flaw. When the alarm goes off, it automatically plays the first song in the library every time, even though it is supposed to play the song the iPod was playing last.
JBL's answer? Following is the ridiculous answer from JBL tech support:
"Good morning and thank you for your inquiry. The issue is a software bug
with the iPods. The JBL On Time will default to the first song in the
library if you have the following iPods with the following software:
iPod Nano - software 1.1 - current
iPod Video - software 1.1 - current
The current fix is to downgrade the software to 1.0 (iPod Updater
2005-11-17). This download enables you to select any song to wake up to.
Please note, downgrading the software will not work with the new iPod
80gb Video or the 2nd generation iPod Nano."
Can you believe it?!? Yeah right, like I'm going back to the stone age with my iPod software.
To me, JBL needs to work with Apple to resolve this problem with future releases of the software, not make "valuable" customers back date...
If you too are an owner of the On Time product, I hope this helps. Please send their support an email letting them know how unsatisfied you are with their product support. Perhaps if they hear from enough of us, they will change there archaic ways...
If you are thinking about buying one, perhaps you should wait for JBL to become more responsible for their own customers' satisfaction...
Cheers.

iPod touches do not operate correctly with a number of earlier iPod accessories. You can look for an adapter to get it to work but other than that, there are not many solutions.

Problems with Microsoft office after system problems with 10.3.9

I had some problems with my G5, it lost the memory for the dock etc but I have been able to fix that but now none of the programs in the Office package are working and there is also problems with Illustrator CS2 they all crash at startup, I have tried to re-install the programs but the problem is still there. Knowing how Os 9 and earlier worked I know that it was possible to trash the prefs file for the program and it would usually solve the problem. Is there something similar I can do here without loosing my mails in entourage etc.?

Have you tried repairing permissions? Go to macupdate.com and download a free program called Onyx. Run the automate tab options.
I would also download and run the 10.3.9 combo updater from Apple. That tends to fix things as well.

Problem with national characters calling System.out.print(...)

I need to develop an application printing spanish characters like "�" (ce trencada) "�", "�", etc.
The problem is when I type
System.out.print("�")in my application, I get "plus-minus" symbol while executing it.
Anyone can help me, please?
Thank you in advance.

check the list of fonts available. You can use the following code for the purpose.
public static void main(String args[])
 String fonts[] = getFontNames();
 for(int i = 0; i < fonts.length; i++)
 System.out.println(fonts);
public static String[] getFontNames()
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
return ge.getAvailableFontFamilyNames();

Problem with nvidia driver, causing system to be unusable

Hello, I've got a problem I assume with nvidia driver. My graphics card is gtx 460, here's my usual glxgears output:
http://dl.dropbox.com/u/16474487/noerror.png
After random amount of time (usually from 30 mins to ~2hours) something 'breaks' and here's what happens:
http://dl.dropbox.com/u/16474487/error.png
I've tried different desktop environments, under xfce4 it also breaks, i've been testing also nvidia-beta and nvidia-all drivers, but it won't help. After 'breaking' i must restart nvidia module, then all again is working fine.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Vazz wrote:Hello, I've got a problem I assume with nvidia driver. My graphics card is gtx 460, here's my usual glxgears output:
http://dl.dropbox.com/u/16474487/noerror.png
After random amount of time (usually from 30 mins to ~2hours) something 'breaks' and here's what happens:
http://dl.dropbox.com/u/16474487/error.png
I've tried different desktop environments, under xfce4 it also breaks, i've been testing also nvidia-beta and nvidia-all drivers, but it won't help. After 'breaking' i must restart nvidia module, then all again is working fine.
Hey Vazz, there is a problem with the nvidia linux drivers/gtx460 hardware, but sadly it only affects a small population.
There is a thread on the nvidia support forums with many others having more or less the same problems.
Still no response from nvidia yet... In the meantime use nouveau.
Last edited by Loafers (2011-01-20 05:13:58)

Problem with correlation on QA systems

Similar Messages

Maybe you are looking for