Problem with corrupted Mail program
This all started because my battery is so weak at this point that if I unplug for more than a few minutes, the system just blinks off....which is exactly what happened while the Mail program was doing something important. When I rebooted, my mail program was completely corrupted.
Now it hangs while checking mail and registers up to 24 new e-mails, but shows none of them, or simply fetches the same e-mail over and over again in each folder. Then it freezes up while the progress whirlygig thing goes around and around...even if I take a mailbox off-line it seems to do this same thing.
I disabled some of the mailboxes and found that this erased the content of all my e-mails in each folder that was disabled.
Meanwhile, it will actually send mail perfectly well.
If I remember correctly, reinstalling my system software will not fix this problem, unless there's something I don't know about. (These days there are many of those things.) Is there a preferences folder I can trash or something I can do to fix my mail program, while hopefully saving my past e-mails (I can dream, can't I?)? Suggestions are most welcome.
Thanks so much!
Jennifer
Golden Shoes:
Thanks for the quick response.
I have a POP account. Several.
Also, I don't run the computer without the AC. It was being moved from a desk to a table when it shut down suddenly before I could reattach the cable.
Would the mail preferences be located in the user folder? I tried getting rid of them and still had the same problem. I'm worried about tossing something global out when I shouldn't.
Finally, if you don't mind, snark never solved a problem. I'm sure you have nothing to prove and if you do, I don't need to know. I simply had a question since I am new to this operating system.
Similar Messages
-
Having Problems with my mail Program
I am having Problems with my email account. I am still on OS snow Leopard and just recently ordered the Newer Mac mini with Lion.
I use to have the Mobile Me account, since I haven't switched over to iCloud yet, I still have the Mobile Me account set up in my email account and still have the Mobile Me idisk on my desktop.I also have my other local isp email account in my mail program. Just now I am getting a email problem from my other email account, I am getting my email but I get a pop up window that request my password from my other email account and at the top of the side bar where the mail icons are on the left side there is a "A" with a Circle around it next to my mail icon or sometimes a " ~ " (Tilda) next to the mail icon. I tried to contact my ISP to ask them if they were having propblems at their end but they didn't get back to me, they usually do get back to me.
Since I have the Mobile Me email account un active, am wondering if the mobile me account is effecting my other active email? am also wondering if the computer still thinks that the Mobile me email account is still active and is trying to get mail through my other active email account?
Does someone have any soloutions for me? or can someone Please help me? cause this is very fustrating cause that Password wondow keeps popping up and I can not turn it off from popping up unless I completly quit the mail program but if I restart it or reopen it up, it starts all over again.
Please someone Help me if you know what is going on here?
Thank You,
Mrs. Trisha Fosteryou might try to look for the VACUUM command (do a google search on: mail.app vacuum).
The ~/Library/Mail/Envelope Index file is a SQLite database. it does slow down as things are added and deleted. You can also find people who suggest deleting (or moving this file to the desktop or somewhere else) after quitting MAIL and then restarting MAIL... it will tell you it needs to import all your mail... it SHOULD find all the mail and rebuild the "Envelope Index" file. You can try it.
link here http://www.macosxhints.com/article.php?story=2006013009291731
Message was edited by: keith daniel1 -
Problem with Java Mail Program
Hi Everyone...
Please help me to sort out this problem...
I am getting this Exception while executing the code pasted below...
javax.mail.AuthenticationFailedException
at javax.mail.Service.connect(Service.java:306)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
at JDCSend.main(JDCSend.java:38)
It's just a simple java program to send an email using JavaMail API
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
import java.util.Properties;
public class JDCSend {
public static void main (String args[]) {
try{
String from = "[email protected]";
String to = "[email protected]";
String host = "smtp.yahoo.com";
// Get system properties
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.port", 465);
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.starttls.enable","true");
// Get session
Session session = Session.getDefaultInstance(props, null);
// Define message
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject("Hello, JDC");
message.setText("Welcome to the JDC");
// Send message
Transport.send(message);
catch(Exception e){ e.printStackTrace(); }
}You need to be identified by stmp server :
// Send message with authentication!
Transport tr = session.getTransport("smtp");
tr.connect(MailHost, user, pass);
message.saveChanges(); // don't forget this
tr.sendMessage(message, message.getAllRecipients());
tr.close();
Read JavaMail Faq please! -
I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated
I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck! -
Problem with Apple Mail since OSX Mavericks
Hello Folks,
since i've updated my mid-2012 iMac to OSX Mavericks, i have a problem with Apple Mail: When i start the Apple Mail, the program says that it could not connect to the icloud mail server, and that i should enter my icloud passwort. When i do this, everything works fine. But that annoys me, because it worked without any problem under OSX Mountain Lion.
Has anyone an idea what i can do to fix this?
Regards,
AlexIn the iCloud pane of System Preferences, uncheck the box marked Mail and check it again.
-
Problems with icloud mail constantly auto-saving
Problems with icloud mail constantly auto-saving - screen freezes. VERY frustrating. running windows 8. same problem through safari, explorer and chrome. Any suggestions to reduce auto save frequency?
Hi Csound1
approx every 30 seconds the browser freezes and 'saving' appears in the top bar of icloud mail. The cursor starts spinning and then after about 8 secs I can start typing again. I also fiund that about 5-6 times a day my icloud browser tab showing mail just close and return to the main icloud menu page showing icons for mail, calender, notes etc -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it. -
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
Problem with a wrapper program.
Hi all,
we are facing problem with a wrapper program,through which we are calling three different xml reports.
when we independently submit these xml reports thorugh front end .
All the three programs run successfully & gives the desired output.
but when we run this through wrapper program.
All ths three programs run successfully ,but don't give output,i.e. output file comes as blank.
when I 'VIEW DETAILS" on the SRS window, the only difference between the independent program & the report through wrapper program is the 'UPON COMPLETION..'part.
The 'UPON COMPLETION..'part. for the independent program shows the RTF Template Layout name ,while the program submitted through the wrapper program doesn't show the layout name.
i have registered all the three reports as XML REPORTS,while the wrapper program as "package_name.procedure_name" & 'TEXT' as an output format.
can anybody tell us , the problem??
thanks.Wow, that's a lot of work. This isn't any different than PL/SQL in the real Oracle world. Parameters are named or positional. Named input uses the assignment operator of =>. Positional takes them in order per the procedure/function signature. In SQL*Plus, do a desc on fnd_request (owned by apps) and tell us what the "default" column represents.
If you have been typing in all arguments, figure out how many times you've done that, how much time it took, multiply it by your hourly rate, and then tell your manager you owe your company that amount of money for having wasted so much time.
function submit_request (
application IN varchar2 default NULL,
program IN varchar2 default NULL,
description IN varchar2 default NULL,
start_time IN varchar2 default NULL,
sub_request IN boolean default FALSE,
argument1 IN varchar2 default CHR(0),
argument2 IN varchar2 default CHR(0),
argument3 IN varchar2 default CHR(0),
argument4 IN varchar2 default CHR(0),
argument5 IN varchar2 default CHR(0),
argument6 IN varchar2 default CHR(0),
argument7 IN varchar2 default CHR(0),
argument8 IN varchar2 default CHR(0),
argument9 IN varchar2 default CHR(0),
argument10 IN varchar2 default CHR(0),
argument11 IN varchar2 default CHR(0),
argument12 IN varchar2 default CHR(0),
argument13 IN varchar2 default CHR(0),
argument14 IN varchar2 default CHR(0),
argument15 IN varchar2 default CHR(0),
argument16 IN varchar2 default CHR(0),
argument17 IN varchar2 default CHR(0),
argument18 IN varchar2 default CHR(0),
argument19 IN varchar2 default CHR(0),
argument20 IN varchar2 default CHR(0),
argument21 IN varchar2 default CHR(0),
argument22 IN varchar2 default CHR(0),
argument23 IN varchar2 default CHR(0),
argument24 IN varchar2 default CHR(0),
argument25 IN varchar2 default CHR(0),
argument26 IN varchar2 default CHR(0),
argument27 IN varchar2 default CHR(0),
argument28 IN varchar2 default CHR(0),
argument29 IN varchar2 default CHR(0),
argument30 IN varchar2 default CHR(0),
argument31 IN varchar2 default CHR(0),
argument32 IN varchar2 default CHR(0),
argument33 IN varchar2 default CHR(0),
argument34 IN varchar2 default CHR(0),
argument35 IN varchar2 default CHR(0),
argument36 IN varchar2 default CHR(0),
argument37 IN varchar2 default CHR(0),
argument38 IN varchar2 default CHR(0),
argument39 IN varchar2 default CHR(0),
argument40 IN varchar2 default CHR(0),
argument41 IN varchar2 default CHR(0),
argument42 IN varchar2 default CHR(0),
argument43 IN varchar2 default CHR(0),
argument44 IN varchar2 default CHR(0),
argument45 IN varchar2 default CHR(0),
argument46 IN varchar2 default CHR(0),
argument47 IN varchar2 default CHR(0),
argument48 IN varchar2 default CHR(0),
argument49 IN varchar2 default CHR(0),
argument50 IN varchar2 default CHR(0),
argument51 IN varchar2 default CHR(0),
argument52 IN varchar2 default CHR(0),
argument53 IN varchar2 default CHR(0),
argument54 IN varchar2 default CHR(0),
argument55 IN varchar2 default CHR(0),
argument56 IN varchar2 default CHR(0),
argument57 IN varchar2 default CHR(0),
argument58 IN varchar2 default CHR(0),
argument59 IN varchar2 default CHR(0),
argument60 IN varchar2 default CHR(0),
argument61 IN varchar2 default CHR(0),
argument62 IN varchar2 default CHR(0),
argument63 IN varchar2 default CHR(0),
argument64 IN varchar2 default CHR(0),
argument65 IN varchar2 default CHR(0),
argument66 IN varchar2 default CHR(0),
argument67 IN varchar2 default CHR(0),
argument68 IN varchar2 default CHR(0),
argument69 IN varchar2 default CHR(0),
argument70 IN varchar2 default CHR(0),
argument71 IN varchar2 default CHR(0),
argument72 IN varchar2 default CHR(0),
argument73 IN varchar2 default CHR(0),
argument74 IN varchar2 default CHR(0),
argument75 IN varchar2 default CHR(0),
argument76 IN varchar2 default CHR(0),
argument77 IN varchar2 default CHR(0),
argument78 IN varchar2 default CHR(0),
argument79 IN varchar2 default CHR(0),
argument80 IN varchar2 default CHR(0),
argument81 IN varchar2 default CHR(0),
argument82 IN varchar2 default CHR(0),
argument83 IN varchar2 default CHR(0),
argument84 IN varchar2 default CHR(0),
argument85 IN varchar2 default CHR(0),
argument86 IN varchar2 default CHR(0),
argument87 IN varchar2 default CHR(0),
argument88 IN varchar2 default CHR(0),
argument89 IN varchar2 default CHR(0),
argument90 IN varchar2 default CHR(0),
argument91 IN varchar2 default CHR(0),
argument92 IN varchar2 default CHR(0),
argument93 IN varchar2 default CHR(0),
argument94 IN varchar2 default CHR(0),
argument95 IN varchar2 default CHR(0),
argument96 IN varchar2 default CHR(0),
argument97 IN varchar2 default CHR(0),
argument98 IN varchar2 default CHR(0),
argument99 IN varchar2 default CHR(0),
argument100 IN varchar2 default CHR(0))
return number; -
Strange problem with the mail app on an iPad
I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that: -
Problem with the "mail me" button
Since I installed both Iweb 09 and Snow Leopard, there is a problem with the "mail me" buttons on my websites. Nothing happens when i click on it even if i see my web adress when my cursor is on the button.
Do somebody had the same problem and do you know how to avoid it.
Thanks a lotI checked your site and found that the mail me button was not overlapping or touching any other object and positioned entirely in the footer of the page. All looks good and it works for me. You might try moving the button, logo and counter to the bottom of the page content section, publish and see if that makes a difference for those computers that can't.
Try the following on your Macbook, open Safari, clear the cache (CommandOptionE), load your site and try again. If that makes it work for your MB tell your friends to clear their caches and try again. Might be something as simple as that. -
I've a problem with my mail app
I have a problem with my mail app, after upgrading mavericks.
My mail app was worked well, before I upgrade.
Now, my mail app is working only with icloud account.
I can use my gmail account with safari or other web browsers, but not in the mail app.
That was happening both of my macbook pro, and macbook air, but not on my iPad and iPhone.
I tried deleting account and re added it, but that doesn't solve the problem.
what should i do..??Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Problem with a compiled program
Hello,
I have a problem with a compiled program on labview 6i.
This program used a serial port (COM1 or COM2).
During the launching of the ".exe ", a fatal error occurs.
Here this error:
=> APPLICATION caused an invalid page fault in
=> module LVRT.DLL at 0167:30164426.
Can somebody help me?
Regards
CedricCedric,
This problem was fixed in the LabVIEW 6.0.2 update. You can download this update (along with the updated runtime engine) from our website.
Good luck with your application, and have a pleasant day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
Problem with my itunes program
i have a ipod shuffle and i have a big problem with my itunes program, he refuse to read cd so i cant put music on my ipod anymore. please help me with that cause now my ipod has become completly unusable.
Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?
Maybe you are looking for
-
Som issues with Nvidia GTX960 - dmesg error output posted
I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called. Here is my dmesg error output. $ dmesg --level=err,warn [ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000D
-
TB Automatically Opens Bing Settings and Add-On Settings at Startup. How to make it stop?
Heyo, So I'm punting as tech support in my office, and don't use TB myself. What's happening is on startup, a Bing settings page and the TB add-ons page are loading in tabs in addition to the inbox tab. X'ing the tabs individually does remove them, b
-
Express Web Agent Developer's Toolkit...
Where can I found information about Express Web Agent Developer's Toolkit?, Because I am using Web Publisher Wizard and I want to create a webpage using a program writen in the Express Stored Procedure Language using the Express Web Agent Developer's
-
We would like to configure RADIUS fallback to ensure RADIUS authentications always go to their primary ACS while it's available, but the documentation is not very clear with regard to the username configuration. There is no mention of a password, but
-
Every Time... and I mean every time that I update Aperture I seem to lose the Auto-Levels Function to one degree or another. The markers in the levels panel will shift either all the way left or all the way right resulting in a totally black or total