Problem with cross

hey there,
i have a problem with a cross for two sequences.
in a earlier cross the is the cross between the scenes. at my problem here the cross is only in the second part of those scenes.
there is no possibility to put it between both scenes.
i´ve looked ...there is no space between the scenes.
how can i solve this problem ?
thaks for help.

It may be that the outgoing clip has no remaining frames after the out point..
If, for example you want to produce a 12 frame dissolve equally across two clips, both the outgoing and incoming clips must have 6 frames of material available before their out/in points.
If that is the case, shorten the clips by 6 frames and then place the dissolve.

Similar Messages

Problem with Cross tabs

I have a problem with cross tab.
When I do grouping on date according to month and summarize the units I am getting the result as 58
while I do grouping without the croos tab generally in the details section I get the result to be 64.
I am not able to understand where is the problem.
Even when I write a query i get the answer as 64.

Hi,
Summarizing with a Cross-tab and creating a summary of a group are one and the same; I mean, the summary results are always the same.
Could you check the summary operation in the crosstab, could you confirm if it is not count or something else?
Also, create a summary and place it on the Group Header/Footer. It should be same as the Crosstab results for the that particular group.
-Abhilash

HT201210 How to correct Problems with cross connections

How to correct Problems with cross connections

Nope not a wrg #, its been a call frm my mom, my son and my brothers that show on my ph, numbers that have been programmed in for years. Thanks

Discover group problem with cross tab report

Hi, I'm working on a cross tab report in discoverer 4i and I'm having a problem with two of the colums. I'm doing a count on one field but because they are called something different they are being shown as two seperate columns rather than 1.
I have one called 101 -AVG and another called 101-AVG. My condition pulls every result back that starts with 101 in the table. So because in the table the values are different it breaks the count into totals for 101 -AVG and 101-AVG.
Is there some way I can group these results together into one field?
thanks,
Ian

Pitson,
better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
BI Publisher
Regards
Rainer

Intermittent problem with cross dissolve and chroma key

It seems that in 1 out of 10 videos I produce in Final Cut Pro there is a problem with the cross dissolve effect and chroma key. What happens is that during the cross dissolve, clip A fades out with a green tint and clip B fades in with a green tint.
Today I am working with two videos that I captured using the same work flow on the same day. One project exhibits the tint while the second project does not. If I import the problematic footage into the good project the tint problem follows the footage. In the good footage, the cross dissolve produces a result that does not have a green tint. If I re-capture the "bad" footage the results are the same.
Has anyone else experienced this and does anyone have an idea how to resolve this problem?
Thank you.
Dual G5 Mac OS X (10.4.6)

In my project, both clips are source clips with Chroma, Color Smoothing and Matte Choker applied. A dissolve from non-chroma clip to chroma clip works fine. Only problem is with two chroma clips. In my dissolve, the error appears as red fringing in the area between the two masks.< </div>
You're using creative shorthand that doesn't help. "Chroma clip" means the clip to which you have applied all of these effects? What masks? Where are you getting the masks?
To understand what's going on with all them itty bitty pixels in a stack of interactive effects, do me a favor: render out a short piece, say 10 seconds of each of your chromaclips as separate movies over transparency using the Animation codec. Reimport them and put them over a solid colored Dissolve between them using different types of dissolves. Post back and tell us (me) what's going on.
I still consider this to be a bug -- nesting adds more steps to the workflow than if this bug did not exist. < </div>
It's not a bug. Your pixels are running down a pathway. It's a question of building the correct pathway and having the correct pixel wranglers with the right kinds of cattle prods.
bogiesan

Problem with Cross-tab report (RTF Template) null values, current-group()

Hi, experts!
I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
Here is my data structure (XML file):(Look the images for details)
http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
=======================
WITH GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
And this is my code I'm using inside the RTF template with groups:(Look the images for details)
http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=======================
WITHOUT GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
When I generate one cross-tab there is no problem: (Look the images for details)
http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
Can someone give me a hand to deal with this?
Thank you!

Pitson,
better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
BI Publisher
Regards
Rainer

Problem with Cross-tab report (RTF Template)

Hi, experts!
I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
Here is my data structure (XML file):(Look the images for details)
http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
=======================
WITH GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
And this is my code I'm using inside the RTF template with groups:(Look the images for details)
http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=======================
WITHOUT GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
When I generate one cross-tab there is no problem: (Look the images for details)
http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
Can someone give me a hand to deal with this?
Thank you!

Pitson,
better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
BI Publisher
Regards
Rainer

Problem with Cross Dissolve: The video cuts out during the transistion

I'm encountering a problem with the Cross Dissolve transistion wherein during the period in which the transition should be happening the video instead drops out. There's plenty of heads and tails available on both clips, but as soon as the timeline hits the start of the transition "from' clip cuts out, revealing the background or black if there's no background underneath and then the "go-to" clip cuts in at the end of the transition.
Any help would be appreciated.

I've been having this issue and it's driving me crazy. It's random, that some cross dissolves work, and others don't. Seems to affect AVCHD footage. Adobe seems to be aware of the issue.
The work around that I've seen posted by a forum user "Mitch W" is to apply a GPU accelerated effect to one of the clips in the pair. The effect can be turned to "0" so as not to alter the video. The act of doing this, makes premiere see the clip differently, and render the cross dissolve correctly.
Fast Blur, set to "zero", seems to do the trick, and allows it to work with CUDA acceleration turned on. I did notice that the work around was broken by changing the playback resolution in the viewer window. In that situation, I had to apply the GPU effect to the other clip in the pair to make it work again.
I don't know what will happen if I change my playback resolution again...

Problem with Cross-domain SSO, NTLM and ITS to R/3

Hello,
We are using EP 6.0.13.0 on a Windows environment. We have an ITS running WebGUI/ESS/MSS in another domain and that is the same domain where the R/3 and BI systems reside. We have configured NTLM authentication using IIS web server 6.0 and the IISProxy 1.6.2. We have configured SSO with the backends using the same ID as in the MS-ADS. Almost everything works fine.
The problem is that when we use the NTLM logon VIA the IIS to the portal, and then navigate to a WebGUI service transaction we are prompted for login. When we refresh the portal screen and try again - it works.
We have configured the mdc.hosts and are using the sendSAPSSO2Cookie.asp to generate the cross-domain logon ticket.
I have read that ITS may require the PAS be set up but I thought that was only used when you are going directly to the ITS (leveraging the NTLM authentication) - not when you are going through the portal.
Does anyone have some experience using ALL of the SSO features (i.e. SSO, cross-domain support, ITS, windows integrated authentication)?
We have though about the relax option for the domain but it does not apply as our domains are:
SERVER1.domain1.com and SERVER2.domain2.com
... so relaxing would not help unless we relaxed to the ".COM" which is unreasonable.
My regards,
Judson Maizels

Hi JUDSON
well i'll give one easy solution
make a alias under host file reside in winnt\system32\drivers\etc directory which has same domain name
i.e
SERVER1.domain1.com server1.mydomain.com
SERVER2.domain2.com server2.mydomain.com
it's works in my schenario we have a same system landscape
as you
regards,
kaushal

Problem with cross reference

Hi,
This is my first post.
I was getting behind on a particular project so my boss asked me to commission a design agency to complete work being done on some prospectuses I started designing.
The agency did their bit and sent the Indesign files back to me but the cross references I create do not work properly. The cross referenced page numbers just wont show.
I have tried copying the text frames to new documents and the cross references work. It's as if someone turned off a switch in that particular document.
There are 13 individual documents in all, each with a minimum of 20 pages, which I intend putting together using the Book panel - so its important the cross references work.
Please see the last lines on pages 2 and 3 of the attached document. the 'please see pageXX' is what I mean. these are pages from the rogue document.
Any help/suggestions will be appreciated.
Thanks
please download the sample indesign file using this dropbox link
http://dl.dropbox.com/u/80149652/sample.zip

I don't know exactly what is causing the problem, but I can definitely see it in Story Editor.
In the screen cap below, the story editor windows on the top row are your file, and the bottom row are a new file with your text pasted in and new cross-ref added. Note the differnce in the tags:
I cant find any casue for the difference, and I don't know what the defective tag is all about. I thought perhaps it was related to a third-party x-ref plugin, but I don't see any sign of that, either. I'm stumped, and the pragmatist in my says copy and paste and move on for now, but save a copy for further exploratin when you have time.
And ask the other agency to tell you what they did and if they use any third party plugins.

Problem With Cross Referencing On Iphone

I have 2 Christina Aguilera songs checked in my itunes account, but only one shows up on my phone under Christina Aguilera. They are both on my phone, and if I look under the song titles, they show up, but if I look under artists, only one shows up. Many other examples of the same. P!nk songs do not show up under artist at all. I even changed the name to Pink, and still nothing shows up under Pink. This really is terrible. The first time I noticed it I was looking for a song from Pink's greatest hits, and I actually said to myself, "Oh, I guess I never uploaded the CD to itunes." So I stuck the CD in my computer and it said, "These songs already exist..." I mentioned it to a genius one time (when I was there for a completely different issue and did not really want to spend that much more time there). I said, "Oh, by the way, if you look under Artist on my phone, nothing shows up under Pink, or P!nk." She said, "Well that is probably because you do not have any Pink songs on your phone." I showed her the entire album and she was like, oh whatever. At the time I thought, well maybe since the exclamation point is there and all, so I let it go. But just now I was looking for a Christina song, and only one showed up. But if I look under the song title, it is there. The problem is that a lot of times I can't remember what a particular song TITLE is, but I know I want to hear a song from an ARTIST. If these 2 are not cross-referenced properly, who knows how many others are like that.
Does anyone have any suggestions?

I should have mentioned that I did delete the Exchange email address, and then recreated it.
There was no change. I am still not able to send, receive, or delete emails from that account on the iPhone.
I'm wondering if the Exchange email service provider has tried to limit access from mobile devices??
I'll follow-up with another post tomorrow when I hear back from them. Any other ideas?

Problem with cross dissolve transitions

I had several short interview clips that I had made into several short Imovies. I wanted to combine the interviews into one longer movie. Each short clip has an intro clip.
The problem occurs when I copy each short clip and paste into the long version. The beginning and end of each clip is clipped somewhat. I think this might be because it's making a new cross dissolve from an existing cross dissolve?
When I remove everything but the interview clip from the short movies then paste into the longer version this problem doesn't happen. Any idea why this might be happening?

If you made the short clips by export the movie with the intro there is probably no extra media available to make the overlap for the transition. Check the preferences for doing the transition if it's set to all or half. That might help you, but it may just not be possible.

Problem with Cross Dissolve and Opacity

I've been noticing that Cross Dissolve has been acting goofey for awhile but have overcome any problems by manually adjusting opacity settings. However, this time I can't get either to cooperate. Notice the line appearing below the phrase "the nutrient recommendation map" in the image below. This line or a similar line will appear as title either cross dissolve into one another or if they are stand alone and the opacity settings fade them in and out. The blinking of the lines is sporadic and changes as I make adjustments. I'll "fix" one spot but they will start to blink at other points in the time line and in different areas.
Any ideas?

I ask because I think I'm having a similar problem. Went home and updated PPro to 5.0.3 and still have the issue.
The screen shot here show the first seconds of an HDV30/60 sequence as the video fades in (bottom layer - lasts about 2 seconds). The top layer is a mask to create the effect of a cinescope camera (no fade). I've cropped the left for demo purposes.
The bottom layer is regular ol' HDV footage. The top layer was created using a Photoshop file with 2 squares using the shape tool and colored black.
For pre-view and render, you can see a light-colored hair line around the top mask. I've applied different effect to remove it, but it won't work. In fact, some effects make it stand out even more. I've also tried using other assets from the PSD (PNG, PPro black video, etc). I also tried the cropping work-around but it did not work.
The screenshot is subtle but it's there. The main thing is that it can be VERY noticable in the BD-R discs I've created played back on set-top players so I'm really hoping there is a fix for it. I did notice that it will appear when I scrub with my finger on the left mouse key. As soon as I let go it appears again.
So PPro is up to date, graphics card is up to date, and I've tried suggested fixes and a few of my own with no luck. Any ideas?
Thanks,
Erik

Problem with Cross Tab in Live Office Connectivity

Hi Experts,
I am using Live Office Connectivity to build a Xcelsius Dashboard.
The webi Report has data in 4 cross tabs which comes to Xcelsius as 4 LO Connections.
The size of the Xcelsius Doc is around 900K. I am getting "Xcelcius has stopped working " error when i preview the document.
Earlier i have built dashboards on Webi Report which used Verticle tables(more than 1 MB in size). I am able to preview them and generate SWF without any problem.
I am working on Xcelsius SP3 on Vista OS with 2 GB RAM.
Is using Cross Tab, responsible for the Application Crash or any other reason?
Please help me in solving the above problem at the earliest.
Please let me know if you need any further information on the same.
TIA,
Bhargava Bommidi.

Bhargava,
Webi cross tabs via Live Office connection should work. Pls see this [post|Re: Does Xcelsius support Cross Tab report via Live Office?; for more detail.
Pls let me know what version of Xcelsius you are using because this error is known to popup when some of the dlls are not registered as well.
Cheers,
Ryan

Building Book TOC in CS4-Problem with cross chapter TOC links in Acro pro

QUESTION: How do I fix the CS4 or ACROBAT v9 Pro Extended problem to fix cross chapter TOC Hyperlinks in BOOKs.
PROBLEM: When I build a CS4 BOOK TOC, the TOCs show up in the .indd. However when I .pdf the book, the links fail.
I am an experienced Framemaker v7 Pro. In the last 2 weeks I have had success designing a 10 chapter book in CS4.
This was very intuitive! Congratulations CS4 developers.
Thanks CS4 developers and community.
Mike VV

HI there,
I recreated the TOC and now the update works. I think perhaps I edited the previous TOC within the TOC rather than in the actual documents and perhaps that caused the update problem.
So problem solved.
Yael

Problem with cross

Similar Messages

Maybe you are looking for