Problem with custom Roadmaps

Hi friends:
I have a question for you guys; Im quite a bit frustrated with this issue now...
I have created a custom Roadmap in transaction RMAUTH, and RMDEF. I have fixed an initial issue with the document store in order to allow the creation of documents in the Roadmap with the help of OSS Note.
Everything works fine, but when I wanted to use the roadmap in a project with transaction RMMAIN, the documentation of every process and task is missing instead I got the following message Document is in the associated substructure and nothing is shown in any place. if I then go to RMAUTH, the documents are shown!
Any help will be greatly appreciated!
Thanks,
Federico

Hello Federico,
It seems that the document could not be retrieved with the correct context in RMMAIN (it is retrieved from the Project).
I am currently checking your issue.
Best regards,
Thierry

Similar Messages

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with custom form

Hey All,
Has anyone ever experience a problem with maximizing or resizing their custom form? I have a rather large form that every time I try to maximize or resize causes Business One to hang and crash.
Any ideas what might be causing this?

Hi Curtis,
Thanks for posting the solution... will keep it in mind!
Thanks,
Adele

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
 private static final String DEFAULT_STYLE_CLASS = "test-input";
 private TextField textField;
 private int id;
 public TestInput(final int ID) {
 super();
 id = ID;
 textField = new TextField();
 init();
 private void init() {
 getStyleClass().add(DEFAULT_STYLE_CLASS);
 public TextField getTextField() {
 return textField;
 @Override protected String getUserAgentStylesheet() {
 return getClass().getResource("testinput.css").toExternalForm();
 @Override public String toString() {
 return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
 private TestInput control;
 private TextField textField;
 private boolean initialized;
 public TestInputSkin(final TestInput CONTROL) {
 super(CONTROL, new TestInputBehavior(CONTROL));
 control = CONTROL;
 textField = control.getTextField();
 initialized = false;
 init();
 private void init() {
 initialized = true;
 paint();
 public final void paint() {
 if (!initialized) {
 init();
 getChildren().clear();
 getChildren().addAll(textField);
 @Override public final TestInput getSkinnable() {
 return control;
 @Override public final void dispose() {
 control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
 private TestInput control;
 public TestInputBehavior(final TestInput CONTROL) {
 super(CONTROL);
 control = CONTROL;
 control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
 @Override public void handle(final KeyEvent EVENT) {
 if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
 keyPressed(EVENT);
 control.focusedProperty().addListener(new ChangeListener<Boolean>() {
 @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
 if (isFocused) { isFocused(); } else { lostFocus(); }
 public void isFocused() {
 System.out.println(control.toString() + " got focus");
 control.getTextField().requestFocus();
 public void lostFocus() {
 System.out.println(control.toString() + " lost focus");
 public void keyPressed(KeyEvent EVENT) {
 if (KeyCode.TAB.equals(EVENT.getCode())) {
 control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
 -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
 TestInput input1;
 TestInput input2;
 TestInput input3;
 TextField input4;
 TextField input5;
 TextField input6;
 Scene scene;
 @Override public void start(final Stage STAGE) {
 setupStage(STAGE, setupScene());
 private Scene setupScene() {
 input1 = new TestInput(1);
 input2 = new TestInput(2);
 input3 = new TestInput(3);
 input4 = new TextField();
 input5 = new TextField();
 input6 = new TextField();
 GridPane pane = new GridPane();
 pane.add(input1, 1, 1);
 pane.add(input2, 1, 2);
 pane.add(input3, 1, 3);
 pane.add(input4, 2, 1);
 pane.add(input5, 2, 2);
 pane.add(input6, 2, 3);
 scene = new Scene(pane);
 return scene;
 private void setupStage(final Stage STAGE, final Scene SCENE) {
 STAGE.setTitle("Test");
 STAGE.setScene(SCENE);
 STAGE.show();
 public static void main(String[] args) {
 launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Printing Problem with custom size paper in Illustrator

Hi having problems with my custom sized paper print using my canon printers it's the same on both the ip100 and the pro-100s, it was printing fine until i've updated my illustrator and mac os Yosemite, it prints the image at a reduced size on the paper to what it should be does anyone have any understanding of this? I've tried everything i know, is this a driver or system problem?

Hi there wasn't an option to set the default printer to pdf where would I do this?
I've done a bit of a work around that seems to be working. I've put the page set up as A4 and then clicked on the printer utility custom settings and then unticked detect paper width, so I can put through the paper I want just got to tweak the x and y to get it right, its not the best but sitting here for four hours trying to figure it out, it will have to do for now. Thanks Jacob for your help, no doubt I'll be back in the morning, I'm burnt out now!

Problem with custom Reports and forms in R12

Hi All,
we are upgrading from 1103 to R12. In R12 we are facing a peculiar problem with Reports. All seeded reports are running perfectly. But no data is coming while running the custom reports. The operating unit field in the SRS window is getting populated automatically while running the seeded reports but getting greyed off while running custom reports.
We are facing the same problem with forms even, data is not getting retrieved in custom forms. Can any one suggest wether there is any profile option which is being missed out by us. ..
Thank you,
Regards
Raj

Add SRW.USER_EXIT('FND SRWINIT') in the afterPForm trigger.
This will set the org context for reports.
~Sukalyan Ghatak

Problems with Custom File Info Panel and Dublin Core

I'm creating a custom file info panel that uses the values of the dublin core description and keywords (subject) for two of it's own fields. I'm having problems with the panel saving if they enter the description on the custom panel first, and with the keywords not echoing each other, or reappearing after a save. Here is the code for the panel <?xml version="1.0"> <!DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0"> <panel title="$$$/matthew/FBPanelName=Testing for Matthew" version="1" type="custom_panel"> group(placement: place_column, spacing:gSpace, horizontal: align_fill, vertical: align_top) { group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/keywords = Keywords', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/keywordsFB = Keywords', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'subject'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/description = Description', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/descriptionFB = Description', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'description'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/season = Season', font: font_big_right, vertical: align_center); popup(fbname: '$$$/matthew/seasonFB = Season', items: '$$$/matthew/Season/Items={};option 3{option 3};option 2{option 2};option 1{option 1}', xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/', xmp_ns_prefix:'matthew', xmp_path:'season'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/ltf = Limited Text Field', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/ltf = Limited Text Field', locked: false, horizontal: align_fill, xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/ ', xmp_ns_prefix:'matthew', xmp_path:'ltf'); } } </panel> Thanks for the help

To answer my own question:
The documentation really sucks.
I found this reply from Adobe <http://forums.adobe.com/message/2540890#2540890>
usually we recommend to install custom panels into the "user" location at:
WINDOWS XP: C:\Documents and Settings\username\Application Data\Adobe\XMP\Custom File Info Panels\2.0\panels\
WINDOWS VISTA: C\Users\username\AppData\Roaming\Adobe\XMP\Custom File Info Panels\2.0\panels\
MAC OS: /user/username/Application Data/Adobe/XMP/Custom File Info Panels/2.0/panels/
The reason why your panels did not work properly was a missing Flash trust file for that user location. Without such a trust file the embedded flash player refuses to "play" your custom panel.
Please see section "Trust files for custom panels" in the XMPFileInfo SDK Programmer's Guide on page 50 for all details on how to create such trust files.
After many wasted hours I have now the simple panels running.
Cheers,
H.Sup

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Problems with customer text objects in ZDEBMAS definition

Hi
   We have a Z* version ( ZDEBMAS ) of std customer chg pointer msg type DEBMAS - this ZDEBMAS is a shortened version of DEBMAS
We notice that whenever customer related texts are changed in customer master, change pointer objects with CD class - CUSTTEXT, TABLE-STXH get generated for the DEBMAS msg type. No such change pointer data gets generated for my ZDEBMAS.
I do not see any CD class with 'CUSSTEXT' entry in the definition of DEBMAS message type -bd52.
I basically want to replicate the customer text data change pointer generation functionality for my 'ZDEBMAS' msg type too ? Any pointers so to what I am missing ?
We are at a very critical stage of implementing the Z* solution - any pointers will be rewarded right away ....

Hi Abdul
         Thanks for the quick response. Yes the change pointers are activated globally ( bd61 ) and the change pointer is activated for ZDEBMAS ( bd50 ). The problem here is that - change pointer data gets generated in ZDEBMAS for other customer related fields - the problem is with customer text fields - the change pointer data does not get generated for customer text fields in ZDEBMAS - whereas it gets generated for DEBMAS - I am wondering why and how ?? ( since DEBMAS does not have an explicity CUSTTEXT - object class in its definition ) . Also, when I try to add this object class as a part of ZDEBMAS , I get an error message that this object class does not exist

Two problems with custom kernel

I get two problems with my custom kernel that is not using initrd and otherwise working fine:
1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
Thanks, CC

ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
how about display drivers? are you compiling them in the kernel or as external modules?

Problems with customizing select lists and popup LOVs

Hi
I have 2 problems about select lists and popup LOVs.
The first one is about a select list in a tabular form.
It should be created with APEX_ITEM.SELECT_LIST_FROM_LOV or similar and take its values from a named LOV.
This worked fine but now it should also have the possibility to enter a free value.
I tried to accomplish that by creating a APEX_ITEM.POPUP_FROM_LOV, but there is a problem with the function that is called by the arrow icon right to the input field (for eg. genList_f11_5()).
If the row is added by addRow, then it works fine, but if the row is is not empty
then the function call is like genList_f11_$_row() and the input field gets no value, when a LOV option is selected.
The other problem is about a select list which should have the possibility to enter a custom value and
also there should be the possibility to select several values. I tried to implement this by a text area containing the selected values and a multiple select list, with an event handler in each option. The user could click options and they would be copied to the text area. The problem is that I couldn't make the event handler work in IE.
I would appreciate any ideas about either of these problems.
Tiina

Hi,
If you download application you can see source.
I have not write any instructions, sorry.
If you are on Apex 4 you can just load jQuery UI autocomplete library and take ideas from my app.
If you download my sample in zip there is uncompressed htmldbQuery library.
You can see that and take only function htmldbAutocomplete.
Then check jQuery UI document
http://jqueryui.com/demos/autocomplete/#method-search
There is method search that you can use open list just by click of input.
I hope this helps at start.
Regards,
Jari

Problem with custom Roadmaps

Similar Messages

Maybe you are looking for