Problem with Data in Form

I have begun using the Form feature in Adobe 8.0. I have made my forms using the Livecycle designer. I have received back completed forms via email and then I have entered the data in the actual form itself by hitting "import data." When doing so I've noticed that there are some responses that show a little bit of the answer but then there is this plus sign (+) and when I click on it, it allows me to see the rest of the response(by scrolling over).
My problem is when I print off the form, it still has this plus sign on there and it doesn't show the complete answer. The only way to see the entire response is if you scroll over on the form on the computer. I was wondering how you get it to show the entire response and get rid of the plus sign???
Any help would be appreciated.

The + signs are appearing to indicate to you that there is more data in the field than there is visible on the screen. There are two solutions to this.
1. Make the fields so that they can dynamically grow to fit the content that is entered into them. This involves re-engineering the form. There is a sample of this that ships with the product and is located at this location from the root of the designer install:
EN\Samples\Forms\Purchase Order\Dynamic Interactive\Forms
Have a look at the comments field at the bottom of the form. If you put in too much info then it will grow to show all data after you tab out of the field.
2. You can have it so that the text that is inserted into the field can shrink to fit the visible area. This is the easier of the solutions. To do this, set the field up to allow multi-line and limit length to visible area. Then on the Font palette, click on the right arrow below the Font tab (beside the text "currently editing caption and value"). Choose the Edit Value option. The text will update to say "currently editing Value properties. Change the font size to 0 (you will have to type in a 0. Now when the amount of text exceeds the visible area the font size will drop a value to allow you to see all text. This can be a negative as well for if we put too much text in then the font becomes so small that we connot read it.....but it is easier.
Hope this helps

Similar Messages

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Problems with Submitting the form

Hey Guys,
I have a form with 7 different fields. my form is connected with the database. once the user fills out the information and clicks on submit the entry should be saved in the database.
Everything is working fine. i can establish connection with the database. my only problem is that when i click on submit its not adding the entry in the database. I think i have problems with this command
<form method = "post" > . Any helpo will be really appreciated. I am posting some part of the code.
<%!
public void jspInit() {
    try {
      Class.forName("org.apache.derby.jdbc.ClientDriver");
      System.out.println("JDBC driver loaded");
    catch (ClassNotFoundException e) {
      System.out.println(e.toString());
<body>
<%
String name, unit, title, supervisor, region, dept, date;
%>
<p align="center"><b><font size="5" face="Arial">LOGIN REQUEST FORM </font></b>
<form method="POST">
<p align="left"><b><font size="2">
     </b>Name:<b> <input type="text" name="name" size="20">   </b>Title   <b>
     <input type="text" name="title" size="20">         </b> Dept <b>
     <input type="text" name="dept" size="20"></b></font></p>
     <p align="left"><font size="2"><b>
     </b>Supervisor: <b> <input type="text" name="supervisor" size="20"> </b>Region<b>
     <input type="text" name="region" size="20"> </b>Business Unit<b>
     <input type="text" name="unit" size="20"></b></font></p>
     <p align="left"><font size="2"><b>              </b>
     Effective Date:<b> <input type="text" name="date" size="20"></b></font></p>
     <input type = "reset">
     <input type = "submit">
     <%
     name = request.getParameter("name");
     unit = request.getParameter("unit");
     title = request.getParameter("title");
     supervisor = request.getParameter("supervisor");
     region = request.getParameter("region");
     dept = request.getParameter("dept");
     date = request.getParameter("date");
     boolean error = false;
     String message = null;
     try {
          Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/sample");
          System.out.println("Connection Established");
          Statement s = con.createStatement();
          String sql = "SELECT name FROM users" +
          "WHERE name='" + name + "'";
          ResultSet rs = s.executeQuery(sql);
          if(rs.next()) {
               rs.close();
               message = "The username <B>" + encodeHtmlTag(name) + "</B> has already been taken. Please select another name.";
               error = true;
          else {
               rs.close();
               sql = "INSERT INTO user" +
               "(name, unit, title, supervisor, region, dept, date)" +
               "VALUES" +
               "('" + name + "'," + " '" + unit + "'," + " '" + title + "'," + " '" + supervisor + "',"
               + " '" + region + "'," + " '" + dept + "'," + " '" + date + "')";
               int i = s.executeUpdate(sql);
               if(i==1) {
                    message = "User Added";
          s.close();
          con.close();
     catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     %>
</form>
</body>
</html>

Even if there was an exception being thrown, you wouldn't see it because you're catching it but not doing anything with the message:
catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     }Try changing this part to:
catch(SQLException e) {
          message = "Error " + e.toString();
                e.printStackTrace();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
                e.printStackTrace();
     }

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Problem with date format when ask prompt web-intelligence

Bo XIR2 with 5 SP. Instaled on Windows 2003 with support Russian.
Inside BO every labels, buttons - use russian. But when invoke web-report and Prompt appear there is problem with date format.
Looks like korean format of date 'jj.nn.aaa H:mm:ss'. I see system settings of date in Win .. everything right
What i have to do?
Where i can change format date for bo?

GK, try this...
decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

Problem with Date format

Got one more problem Merilyn and Radhakrishnan...
Regarding the soln y provided me earler with the thread "Problem with date format"...
What is happening is....I am able to change the 2400 to 0000 but when it is changed from 2400 on jan 1st to 0000 the hour is changing but not the date....the date still remains as jan 1st instead of jan 2nd....
Eg: Jan 1st 2400 -- changed to -- jan1st 0000
instead of jan 2nd 0000
Could you please help me in this issue...
Thanks,
GK

GK, try this...
decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

Problem with date calculation

I am a rookie in SAP i have a small problem with date.Do we have any function module to find out the first day in a month if we give out the system current date ?? Pls help me out.

Hi,
As Ganesan told,you can do.
Here is the sample code.
data v type sy-datum.
data d type DTRESR-WEEKDAY.
v+6(2) = '01'.
v4(2) = sy-datum4(2).
v0(4) = sy-datum0(4).
CALL FUNCTION 'DATE_TO_DAY'
EXPORTING
date = v
IMPORTING
WEEKDAY = d.
write d.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

Problem with date format dd/mm/yyyy. But I need to convert yyyy-mm-dd.

Dear friends,
I have the problem with date format. I receiving the date with the format dd/mm/yyyy. But I can upload to MySQL only in the format of yyyy-mm-dd.
how should I handle this situation, for this I've created these code lines.But I have some problem with these line. please help me to solve this problem.
String pattern = "yyyy-mm-dd";
SimpleDateFormat format = new SimpleDateFormat(pattern);
try {
Date date = format.parse("2006-02-12");
System.out.println(date);
} catch (ParseException e) {
e.printStackTrace();
System.out.println(format.format(new Date()));
this out put gives me Tue Apr 03 00:00:00 IST 2007
But I need the date format in yyyy-mm-dd.
regards,
maza
thanks in advance.

Thanks Dear BalusC,
I tried with this,
rs.getString("DATA_SCAD1")// where the source from .xls files
String pattern = "yyyy-MM-dd";
SimpleDateFormat format = new SimpleDateFormat(pattern);
try {
Date date = format.parse("DATA_SCAD1");
System.out.println(date);
} catch (ParseException e) {
e.printStackTrace();
System.out.println(format.format(new Date()));
this out put gives me Tue Apr 03 00:00:00 IST 2007
But I want to display the date format in yyyy-mm-dd.
regards,
maza

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

A problem with data acquisitioning in LV 7.1 (transition from Traditional NI-DAQ to NI-DAQmx)

Hi to everyone,
I have a problem with data acquisitioning in LV 7.1.
I made a transition from Tradiotional NI-DAQ to NI-DAQmx in my LabVIEW application.
The problem I have is that when I acquire data in Traditional (without writing somewhere -
just reading) then there is no scan backlog data. But when I acquire data in application that
acquisition is based on DAQmx than a scan backlog indicator shows numbers from 20 to 50 for
about 6 min and then that number quite quickly increases until I get an error (unable to
acquire data. The data was overwritten).
Acquisition settings are the same in both cases. When I acquire with DAQmx I use a global
channels. Is a reason for that phenomenon in global channels data procesing? But it seems
strange why does it flows quite smoothly for about 6 min and then it stucks?
Best regards,
Ero

If you have an old Daq unit it may not be compatible with DAQMX. Which DAQ unit do you have? I think NI have a list showing which DAQ driver you can use with your card
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Problem with navagation of forms

Hi everybody
I have a problem with navigation of forms
I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b'); Raise form_trigger_failure;
When i run form a and press the button form b is not opening.It is giving me a message as 'form b cannot be opened'
Can somebody tell me where i am wrong.I have compiled b.
TIA
Prajakta

Why are you using Raise form_trigger_failure;
You don't need it.
Try doing open_form('b.fmx');
If this doesnt work
I think your problem is that the fmx file for form b is not in the path to be found.
make sure to include the direcoty in the forms60_path or have it in the same directory as form a.

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

Problem with Data in Form

Similar Messages

Maybe you are looking for