Problem with DB JCA adapter in Soa suite 11g composite appl
i am testing a simple credit card validation composite with Oracle SOA suite 11g11.1.1.4.0, Jdevloper 11.1.1.3.0 and oracle universal XE DB. I am having an exception given below. I have checked that data source is properly configured and appearing at the right place in JNDI tree. Suggestion like 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR) has also been tried result is same
**Any suggestion will greatly appreciated .**
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(Unknown Source) at com.sun.el.MethodExpressionImpl.invoke(Unknown Source) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:992) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 79 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 82 more
Hi,
The JNDI Name to use for the service connection is "eis/DB/soademoDatabase".
This Database is a requirement of the course... (Chapter 4 of Getting Started with Oracle SOA Suite 11g R1 - A Hands-On Tutorial).
Similar Messages
-
Read from a config file in File Adapter in SOA Suite 11g
I want to read from a config file in order to determine whether to archive or delete the file after processing using file adapter in SOA Suite 11g. How do i do that.
only part i replied on was the part of how to read a file
but i think in your case you could do the next
use the sync file adapter to read in the file during your process
based on this content you set a variable "myOutputDirectory"
then create a file adapter (write) which will store the file on file system
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#CIACICFD
4.3.2.2.5 Specifying a Dynamic Outbound File Name
and use that (jca.file.Directory) property to store the file either on the archive location or the delete location -
Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL
Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo errorHi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s) -
SOA Suite 11g composite application deployment to SOA cluster?
What is the best practice for 11g composite app deployments to a SOA cluster? Currently, when customer deploys SOA composite it only gets deployed to one of the SOA managed servers in the cluster and the only way for them to sync up SOA1 and SOA2 is by bouncing the servers. Is there a best practice on how to deploy composite apps to SOA clustered env?
1) When we deploy the composite, will it be distributed across all the servers in the cluster ? or only in one server?
If you deploy it on to cluster it will be distributed across all the servers.
2) If i have a composite which polls the file, and we deploy this composite in the cluster, How to avoid the locking between two processes since both are same and polling to same directory?
Set the connectionfactory to this value eis/HAFileAdapter for example
<adapter-config name="FlatStructureIn" adapter="File Adapter"
xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata"> *<connectionfactory*
location="eis/HAFileAdapter" UIincludeWildcard="*.txt" adapterRef=""/>
<endpoint-activation portType="Read_ptt" operation="Read"> <activation-spec
className="oracle.tip.adapter.file.inbound.FileActivationSpec"../> <property../>
<property../> </activation-spec> </endpoint-activation> </adapter-config> -
Java invocation of a SOA Suite 11g composite
Does anyone have any idea or can point me to a site that discusses how to startup a SOA 11g app using Java???????
Thanks - CaseyHi Casey,
When you go to the em console and navigate to the deployed version of the composite application you will find a fullblown wsdl.
This one you can use to generate your webproxy against.
I used it also in my last blog, see :
http://eelzinga.wordpress.com/2010/05/21/scheduling-oracle-soa-suite-composite-applications-or-whatever-you-want-in-weblogic/
Hope it works for you too -
Integrating SaaS CRM (cloud) with SOA suite 11g
Hi All,
I have a one requirement, need to read a file shared by SaaS CRM of Oracle Fusion applications which are hosted on Cloud from SOA suite 11g. Any pointers or blogs references please.
Thanks!Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s) -
Error while starting the AqAdapter in SOA Suite 11g Admin Console
facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanksThis is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
Trying to integrate with User Messaging Service adapter in SOA suite. Can it be possible through an JMS interface.
I have an JMS backend integrated to Oracle B2B. Is it possible to send an email protocol message using JMS interface to B2B where User messaging Service has been implemented. The adapters required for UMS have been deployed and the sdpmessaging jar files also have been added to the classpath. The only problem i face is i dont have an BPEL system to integrate where as in the forums it has been mentioned how to post a message using BPEL.
Please let me know if there is a way to integrate the adapter with JMS interface.
Thanks in advance
DeepakIf I remember correct, to use JCA adapter with SOA stack requires that adapter implement some Oracle API.
The Adapter SDK is a light-weight tool kit that enables rapid implementation and deployment --- http://www.oracle.com/technology/products/integration/adapters/pdf/DS_OracleASAdapter.pdf
http://download.oracle.com/docs/cd/B16981_04/current/acrobat/cct115dg.pdf
Mostly you will have to wrap your jca adapter to make it available in SOA suite/stack.
Other option is that you adapter provider would have given CCI interface or some custom interface which can be used for invoking adapter end-points.
Manoj -
Problem after restart of a database used by a database adapter in SOA suite
We are migration from Oracle interconnect to SOA suite. I am a bit worried that I am taking a backwards step in robust drift. I restarted a Oracle database that is used as an end point in both interconnect and SOA. In both cases the database adapter in interconnect and the partner link in SOA start throwing java error messages. This is not the problem, what worries me is that with Interconnect restarting the database adapter allows queued messages to be written to the database, nothing goes missing. But with SOA suite the messages that could not be delivered before restarting SOA suite end as "canceled" that is to say they do NOT get completed. What happened to guaranteed transaction delivery? or am i missing something.
Hi,
The JNDI Name to use for the service connection is "eis/DB/soademoDatabase".
This Database is a requirement of the course... (Chapter 4 of Getting Started with Oracle SOA Suite 11g R1 - A Hands-On Tutorial). -
Error invoking Oracle Application Adapter part of SOA Suite 11g
We are using Oracle application adapter from BPEL process manager ( SOA Suite 11g) to call PLSQL:OE_ORDER_PUB:PROCESS_ORDER (EBS R12).
The call returns error : "<ns0:X_MSG_DATA
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">FND
FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PVT N PROCEDURE_NAME Lines N
ERROR_TEXT ORA-06502: PL/SQL: numeric or value error: NULL index table key
value </ns0:X_MSG_DATA>"
The same order gets created from PLSQL but fails while trying from BPEL through Oracle APPS adapter. The dbg file at the EBS end is given below:
Session Id:5695950
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID22020
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
In OE_Contracts_util.check_license
performing check first time, lx_status: I
l_sales_contracts_enabled: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Querying the table for the AR details ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
Raj3
Raj4
before getting payment count
Exiting OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
ENTER OE_HEADER_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DBE
Parameter value fetched from table.
PARAMETER VALUE: E
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SECURITY.ENTITY
Entering OR_HEADER_UTIL.Pre_Write_Process
No prepayments for the order
Entering OE_HEADER_UTIL.Get_Order_Number
Entering OE_HEADER_UTIL.Get_Order_Number
Ordertype is :1087
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
before calling get_seq_info
Category Code1087
Set of Books2021
after calling get_seq_info
fndseqresult0
fndseqtype1017
p_old_header_rec.order_number:
p_old_header_rec.transaction_phase_code:
Exiting OR_HEADER_UTIL.Get_Order_Number
Exiting OR_HEADER_UTIL.Pre_Write_Process
WRITE TO DB
Entering OE_HEADER_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
P_HEADER_ID=22020
P_HEADER_REC.HEADER_ID=22020
OD GLOBAL HEADER_ID= 22020
NEW GLOBAL HEADER_ID= 22020
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
returned index is: 1
Exiting OE_HEADER_UTIL.INSERT_ROW
Entering OE_HEADER_UTIL.Post_Write_Process
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering Procedure Process_Request_Pvt
Request type DFLT_HSCREDIT_FOR_SREP
Entering OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTERING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER_SCREDITS
ENTER OE_HEADER_SCREDIT_SECURITY.ATTRIBUTES
Entering OE_VALIDATE_Header_Scredits.Attributes
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_Header_Scredits.Attributes
Entering OE_VALIDATE_Header_Scredits.Entity
Entering OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Entity
ENTER OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: E
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
P_HDR_SCR_ID=64168
ENTERING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
EXITING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
INDEX=641680001
L_RETURN_STATUS =S
L_RESULT =F
OLD SCR_ID 64168
NEW SCR_ID64168
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
RETURNED INDEX IS: 641680001
EXITING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
EXITING OE_ORDER_PVT.HEADER_SCREDITS
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
EXITING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
Exiting OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
leaving process_requenst_for_reqtype
Before calling eval_post_write_header in HEADER Post Write
ENTERING EVAL_POST_WRITE_HEADER
M_HOLD_ENTITY_CODE/M_HOLD_ENTITY_ID:C/13489
RETRIEVING NEW HOLD SOURCE RECORD
HOLD SOURCE RECORD NOT FOUND , EXITING
EXITING EVAL_POST_WRITE_HEADER
After calling eval_post_write_header in HEADER Post Write
Before calling OE_SCHEDULE_UTIL
ENTERING INSERT_INTO_MTL_SALES_ORDERS
CALLING INVS CREATE_SALESORDER
ORDER TYPE: Cochin Order
SOURCE CODE: ORDER ENTRY
ORDER NUMBER : 1017
L_MSG_COUNT
RETURN STATUS S
EXITING INSERT_INTO_MTL_SALES_ORDERS
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_HEADER_UTIL.Post_Write_Process
EXITING OE_ORDER_PVT.HEADER
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER PROCESSING HEADER_ID = 22020
AFTER HEADER_ADJS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER_PRICE_ATTS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
Entering Procedure Process_Request_Pvt
Request type CHECK_HSC_QUOTA_TOTAL
Entering OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
Entering OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
BEFORE LINES PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering OE_ORDER_PVT.LINES 1: 15-OCT-09 18:31:47
---------LOOPING FOR NTH TIME N= 1
OPERATION = CREATE SO SETTING OLD TO NULL
Entering OE_LINE_UTIL.CONVERT_MISS_TO_NULL
outside margin convert miss to null
inside margin convert miss to null
Exiting OE_LINE_UTIL.CONVERT_MISS_TO_NULL
AT LINE LEVEL HEADER_ID22020
Entering OE_HEADER_UTIL.LOCK_ROW
Entering OE_HEADER_UTIL.QUERY_ROW
Before caching OE_HEADER_UTIL.QUERY_ROW
Exiting OE_HEADER_UTIL.QUERY_ROW
selected for update, now compare
STANDARD LINE
L_MODE IS MODELS_AND_STANDARD
0
STARTING LINE LOOP. HEADER_ID = 22020
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DB83
Parameter value fetched from table.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 9.990000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E+125
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
querying item from mtl_system_items
querying based on ship_from_org
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
CHECK ATTRIBUTES SECURITY
Enter OE_LINE_Security.Attributes
ATTRIBUTE VALIDATION
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Enter procedure OE_validate_line.Attributes
Header has got created in the same call
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
before selecting line_type info : G_MISS_CHAR
after selecting line_type info : G_MISS_CHAR
tax_flag :
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
Checking for Ship Dates....
Checking for Arival Dates....
item_relationship_type :
preferred_grade:
Exiting procedure OE_validate_line.Attributes
AFTER ATTRIBUTE VALIDATION
DEFAULT MISSING
ENTER OE_DEFAULT_LINE.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
IN DEFAULTING: FUNCTION GET_ITEM_TYPE
THE INV ITEM IS5429
line_category_code = ORDER
retrobill_request_id =
item_type_code =
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
CALLING GET_SMC
DEFAULTING SMC FLAG
GET SMC: TOP MODEL LINE ID :
CALLING GET_ATO
IN GET_ATO_LINE , ITEM_TYPE_CODE :STANDARD
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
GET_ATO_LINE: NY
RETURN ATO_LINE_ID AS NULL
ENTERING MODEL_OPTION_DEFAULTING
LINE_ID TO DEFAULT:
IB Owner:
IB Install:
IB Current:
Entering OE_CONFIG_TSO_PVT.Is_Part_of_Container_Model..: 15-OCT-09 18:31:47
Line Id :
Top Model Line id:
ATO Line id:
operation :
inv item : 5429
Inventory Item id:5429
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
BOM Item Type:4
Replenish to Order:N
Config Model Type:
Top Container Model?:N
Part of Container Model?:N
Exiting OE_CONFIG_TSO_PVT.Is_Part_Of_Container_Model..: 15-OCT-09 18:31:47
RETURNING FOR ITEM TYPE MODEL AND STANDARD
TOLERANCE BELOW :
TOLERANCE BELOW :
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
Before Defaulting P_Qty and P_Qty_Uom Values:
Pricing Qty: 20
Pricing UOM:
Ordered Qty: 20
Ordered UOM: EA
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
SHIP FROM OR SHIP METHOD IS NULL/MISSING
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
CALLING GET SHIPPABLE_FLAG
1 , ATO_LINE_ID:
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
SHIPPABLE FLAG: Y
SETTING RE_SOURCE_FLAG TO N
EXIT OE_DEFAULT_LINE.ATTRIBUTES
APPLY ATTRIBUTE CHANGES
Entering OE_LINE_UTIL.APPLY_ATTRIBUTE_CHANGES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
ENTER RETURN_LINE
EXIT , THIS IS A REGULAR LINE
Entering OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.Enforce_List_price
Exiting OE_ORDER_CACHE.Enforce_List_price
old calculate price flag G_MISS_CHAR
new calculate price flagY
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
OE_GLOBALS.G_PRICING_RECURSION:N
Entering OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
New Item, dont have to do anything
Exiting OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Ordered Qty has changed
New Ordered Qty : 20
Old Ordered Qty :
Freeze method is :BOOKING
B2315926_2:
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for ENABLE_FULFILLMENT_ACCEPTANCE
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
CSH --OUT of l_copy_service_field condition
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
LEAVING OE_MSG_PUB.ADD
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Request help.
Thank you
Vijosh
Edited by: user8690315 on Oct 20, 2009 12:19 AMHi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric. -
SOA Suite 11g - dynamic JNDI destination JMS adapter
hi there soa suite users,
im currently using oracle soa suite 11g,
my use case having a bpel process processing something
and then route the result to several queue.
like this:
jms/adminduk/queue/mks1
jms/adminduk/queue/pdg1,
etc...
so the destination name can be build dynamically in the bpel,
and i stored in a string variable "destName".
(im using WLS 10.3 jms)
now i need to invoke a jms adapter service with produce operation,
but the queue destination needs to be using the variable "destName".
i already tried using assigning to property "jca.jms.JMSDestinationName"
in the invoke activity.
<invoke ...>
<bpelx:inputProperty name="jca.jms.JMSDestinationName"
variable="destName"/>
</invoke>
but it seems not working, and im getting this error:
Caused by: com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation
'SendSinkBioWniFromDaerahResponse' failed du
e to: ERRJMS_ERR_CR_QUEUE_PROD.
ERRJMS_ERR_CR_QUEUE_PROD.
Unable to create Queue producer due to JMSException.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>[JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer
requested. The linked
exception may contain more information about the reason for failure.</detail>
,code=<code>null</code>
this is a basic use case of jms interoperability,
anyone have answers to this ??
thank you :)Hi,
If someone is looking to dynamically set the JMSqueue name here is the solution.
in the Invoke activity set "jca.jms.JMSDestinationName"
value to "JMSHeaderVariable"
set the type to "input"
in the JMSHeaderVariable set the queue name dynamically.
and in the JMSadapter give any valid queue name, still the message will be routed to the queue which you have set in the invoke adapter. -
Passing dynamic jndi destination to jms adapter in SOA Suite
hi i post this thread in SOA Suite category,
but havent got any answer yet,
maybe someone in weblogic jms community here have an answer :)
im interfacing Weblogic JMS 10.3 with SOA Suite 11gR1 BPEL/JMS Adapter,
and i need to pass a dynamic destination jndi to message producing adapter in the orchestration process.
details here:
Re: SOA Suite 11g - dynamic JNDI destination JMS adapterHi,
If someone is looking to dynamically set the JMSqueue name here is the solution.
in the Invoke activity set "jca.jms.JMSDestinationName"
value to "JMSHeaderVariable"
set the type to "input"
in the JMSHeaderVariable set the queue name dynamically.
and in the JMSadapter give any valid queue name, still the message will be routed to the queue which you have set in the invoke adapter. -
OracleBAMAdapter Configuration problem in SOA suite 11g
Hi,
In Oracle SOA suite 11g(11.1.1.2.0), OracleBAMAdapter configuration using WebLogic server console is resulting in the following error
* An error occurred during activation of changes, please see the log for details.
* [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
Steps used for configuration:
1) Modify adapter configuration using navigation:: Deployments -> OracleBAMAdapter -> Configuration -> Outbound Connection Pools -> oracle.bam.adapter.adc.RMIConnectionFactory -> eis/bam/rmi
2) Specified connection properties with BAM server port details
HostName localhost
InstanceName ADCServer1
Password welcome1
PortNumber *9001*
UserName weblogic
In config.xml (%Domains%/soa_domain/config/) , I could see the following library entry
<library>
<name>[email protected]</name>
<target>AdminServer,soa_server1</target>
<source-path>K:\OracleFMW\Oracle_SOA/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.wc.jar</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
Could you please help resolving this issue?
Regards
NaveenI do not think that would qualify as a solution :-). I was negligient in deploying Work Flow Application, and was not deselecting the checkbox in 11.1.1.2.0 JDeveloper, which reads out like "Deploy to all the servers". Thus it was trying to deploy it to BAM server as well as the Admin Server. I had to deselect it. It's pretty mundane thing that I was missing.
Warm regards. -
Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64
I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
But I get the following error:
bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
Starting Oracle Universal Installer...
Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
[email protected]creenRes
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1005)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
... 8 more
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I think that the error would be caused by the JDK version with which try to initializing.
Anyone have any idea about the possible error? Thanks in advance.Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.
Maybe you are looking for
-
How can i add a navigation rule at the runtime of JSF?
Hello, how can i add a navigation rule at the runtime of JSF. Maybe i should use the method "addNavigationRule()" in class "FacesConfig", but i do not know, how can i obtain the instance of class "FacesConfig". Can anybody help me? Thank you very muc
-
How to I restore lost audiobooks from iTunes after replacing my hard drive?
After replacing my hard driver I put my apple ID and password into iTunes and was able to re-download all of my music but I was not able to get my audiobooks. Does anyone know how I can do that?
-
Hello, I just got the Macbook Pro and want to migrate files from my Intel iMac to the new Macbook Pro. I tried doing it over wi-fi but it would ask me for a password twice and the second time it would just load and go back to the searching for anothe
-
V$%ADVICE% views
Hi, I did not find an explanation about the data basis of these views in Oracle's documentation. Is it related to the latest shapshot of Oracle's workload repository? Or what else? Can anybody explain this to me, or point me to the place in the docum
-
E75 - phone doesn't ring! Calls going straight to ...
My E75 makes 1 of 3 decisions when it receives an incoming call: 1. The ringtone 'rings' like normal according to it's setting. 2. It's rings 'once' for a period of about 1 second then is silent but still shows it's receiving a call on the screen. 3.