Problem with deploying : SDM could not start the J2EE cluster on the host .

Hello, All
I have following problem with deploying the aplication I get this messenger:
16/09/2008 07:59:44 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : 192.168.0.14
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Result
=> deployment aborted : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Aborted: development component 'ZChangeRequestDatabase'/'local'/'LOKAL'/'0.2008.05.03.04.24.17'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated. There is no cluster control instance running on host Jupiter which is described in SecureStorage . The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :|Name:JM_T1221612526745_0_penitus15 |Host:PENITUS15 |State:5|HostAddress:192.168.0.205||Name:JM_T1221612357814_0_Jupiter |Host:pfs |State:5|HostAddress:192.168.0.14||Name:JC_Jupiter_JTP_00 |Host:pfs |State:5|HostAddress:192.168.0.14|Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
I dont'n know How do I solver this error?
- I reviewed the virtual memory and I increase the virtual memory
- I restarted the server and the system
- I reviwed the parameter in the config tool --> cluster --> security storage it is OK
Any suggestion for solver this problem
Thanks
Regards
DS

I found this messenger in Additional log information., Please si
17/09/2008 03:04:51 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\JTP\JC00\SDM\program\log\sdmcl20080917200328.log]/>
<!PATTERN[sdmcl20080917200328.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Sep 17, 2008 1:04:40 PM Info: -
Starting deployment -
Sep 17, 2008 1:04:40 PM Info: Error handling strategy: OnErrorStop
Sep 17, 2008 1:04:40 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Sep 17, 2008 1:04:40 PM Info: Update strategy: UpdateAllVersions
Sep 17, 2008 1:04:40 PM Info: Starting deployment prerequisites:
Sep 17, 2008 1:04:40 PM Info: Loading selected archives...
Sep 17, 2008 1:04:40 PM Info: Loading archive 'C:\usr\sap\JTP\JC00\SDM\program\temp\temp62604ZIssueDatabase.ear'
Sep 17, 2008 1:04:41 PM Info: Selected archives successfully loaded.
Sep 17, 2008 1:04:41 PM Info: Actions per selected component:
Sep 17, 2008 1:04:41 PM Info: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:41 PM Info: Ending deployment prerequisites. All items are correct.
Sep 17, 2008 1:04:43 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Saved current Engine state.
Sep 17, 2008 1:04:45 PM Info: Starting: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:45 PM Info: SDA to be deployed: C:\usr\sap\JTP\JC00\SDM\root\origin\local\ZIssueDatabase\LOKAL\0\0.2008.04.17.10.53.03\temp62604ZIssueDatabase.ear
Sep 17, 2008 1:04:45 PM Info: Software type of SDA: J2EE
Sep 17, 2008 1:04:45 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Starting cluster instance processes.
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: An error occured while starting a cluster instance.
Sep 17, 2008 1:04:45 PM Error: There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
Sep 17, 2008 1:04:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Aborted: development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated.
There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Sep 17, 2008 1:04:45 PM Info: Starting to save the repository
Sep 17, 2008 1:04:46 PM Info: Finished saving the repository
Sep 17, 2008 1:04:47 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2008 1:04:47 PM Error: -
At least one of the Deployments failed -
Any help will be well received about this problema
Thk
Regards
DS

Similar Messages

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

HI,
I am trying to deploy ESS packges in EP through SDM.But while deploying I am getting this error in SDM at the start itself:-
Error: An error occured while starting a cluster instance.
Oct 14, 2008 5:14:41 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
Please check if there is an appropriate running cluster instances
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
I am pasting the full LOG File details:-
Oct 14, 2008 6:32:00 PM Info: Starting cluster instance processes.
Oct 14, 2008 6:32:00 PM Error: An error occured while starting a cluster instance.
Oct 14, 2008 6:32:00 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage . The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
Oct 14, 2008 6:32:00 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Oct 14, 2008 6:32:00 PM Error: Aborted: development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0', grouped by software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 14, 2008 6:32:04 PM Info: Starting to save the repository
Oct 14, 2008 6:32:05 PM Info: Finished saving the repository
Oct 14, 2008 6:32:07 PM Info: Starting: Initial deployment: Selected software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0' will be deployed.
Oct 14, 2008 6:32:07 PM Error: Aborted: software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
Failed deployment of SDAs:
development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0' : aborted
Please, look at error logs above for more information!
I have checked the CONFIGTOOl and the properties seem to be OK.
I tried SHUTTING DOWN all APPLICATION servers & Restarting the DEPLOYMENT,but it still Failed
Pls suggest.
Regards,
Abhijeet
I

Hi George,
Thnx for your reply.
I have stopped all Application servers and kept only the CI-DB instances running.Retried deploying the ESS packages but still getting the same error.
Have checked the Visual admin,it is not in SAFE mode,it working normally.
Have alos checked the CLUSTER Manager Property Values in both Visual Admin & Config Tool,they are alright.
About the Cluster Resources,can you pls specify what exactly do you mean by "Cluster Resources are running or not".
I think if the application servers are stopped,then the Cluster resources shudnt come into play right?? Correct me if I am wrong.
Kindly suggest what other steps I shud take.
Regards,
Abhijeet

SDM could not start the J2EE cluster on the host Error on Deployments

Hi,
We are sudenly getting this Error when trying to make a Deployment in the NWDE:
Settings
SDM host : 10.26.26.198
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Aborted: development component 'WDWFApp'/'local'/'LOKAL'/'0.2007.02.16.15.11.28'/'0':SDM could not start the J2EE cluster on the host vmxtbcsapep01! The online deployment is terminated. There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage . The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :|Name:JM_T1171660289517_0_ALMACARVAJAL |Host:miriamdragustinovis |State:5|HostAddress:10.21.69.164||Name:JM_T1171656308064_0_vmxtbcsapep01 |Host:cvespinosa |State:5|HostAddress:10.26.26.198||Name:JC_vmxtbcsapep01_CPQ_00 |Host:cvespinosa |State:5|HostAddress:10.26.26.198|Please check if there is an appropriate running cluster instances. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
And in the sdm log file we got this kind of errors:
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[miriamdragustinovis] Throwable: java.net.UnknownHostException Throwable message: miriamdragustinovis
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: An error occured while starting a cluster instance.
Feb 16, 2007 2:13:46 PM Error: There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :
Name:JM_T1171656916610_0_ALMACARVAJAL
Host:miriamdragustinovis
State:5
HostAddress:10.21.69.164
Name:JM_T1171656308064_0_vmxtbcsapep01
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Name:JC_vmxtbcsapep01_CPQ_00
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Any Idea what can be wrong? we have even restarted de AIX Server and starting all the services and it is still not working.
Thanx in Advanced!
Gerardo J

Hi Gerardo,
I encountered exactly the same error, but had a different solution as I was expecting from the error-message.
In my case I was forced by the Visual Administrator to change the administration password, since the time was up on it. But as the password for the Visual Administrator is saved within the database, the password for the SDM is stored within the secure store (file-system) and changing the password just in VA will not automatically change it also in the secure store. But since both passwords for the internal usage need to be equalized, I encountered problems afterwards when trying to deploy something and I got the same error message. However the sense of restriction is meant here, the solution on it was rather simple as follows (Just note that you need to enter a dummy-password first, before setting the correct one similar to your visual administrator):
1. create a telnet session to your J2EE using a command line shell
2. enter "jump 0" to get on the correct node within your J2EE
3. enter "add user" to gain access to user-specific commands
4. enter "password <Administrator> <temporarily new password>"
5. exit
6. create another telnet session to your J2EE using a command line shell
7. after succeeded the login, you will now be forced to enter a new password - so enter "password <Administrator> <origin password of the Visual Administrator>"
8. exit
9. now start the config-tool of the engine
10. apply to the DB-default-question with "yes"
11. select the Secure Store on the left
12. select the entry "admin/password/..." that you can see it in the bottom lines.
13. click "Remove" to delete it from the list
14. set the password similar to the Visual Administrator password within the "Value" line (take care as you can not see the digits).
15. click "Add" to add it back to the list
16. click the disc symbol in the top of the UI to save the new password (if you don't get a dialog afterwards that the data has been stored, something may hasn't worked fine when removing/adding the password-entry, in this case repeat the action on it).
17. After exiting the config-tool, you need to restart the entire J2EE.
18. Your hopefully finished by success ;o))
Best regards
Jochen

NW4: SDM could not start the J2EE cluster on the host nw4host

Hello,
in NW4 i get this error when i try to deploy the welcome webdynpro:
SDM could not start the J2EE cluster on the host nw4host! The online deployment is terminated. JStartup Framework is not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I am using NW4 (built 28.9.04) on Suse 9.0 and the corresponding IDE (2.04) on Windows 2000.
In the J2EE view of the IDE everything (SDM, Dispatcher and Server) is green. I can start the examples on port 50000. According to systeminfo everything is running.
I searched in OSS and found Note 738402. But there is no EOF in the SDM-logfile. And when i started the J2EE-Configtool the value for "admin/host/SID" is not localhost.
Any hints?
Regards,
Nico.

Hello,
> Developer Studio -> Preferences -> SAP J2EE Engine ?
of course. Every icon (SDM, Dispatcher and server) is green in the J22E-View of the IDE. I still get this error message.
Regards,
Nico.

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Win OS could not start becasue of error in the software on Satellite A85-S107?

Windows could not start because of an error in the software. Please report this problem as:
Load needed DLLs for kernel.
Please contact your support person to report this problem."
A blue screen was suddenly pop up when i was surfing a website, the above warning in black and white was showed after i took out the battery and restarted the windows.
I thought it was just a simple step if i took out the recovery disk, but i was wrong.
The recovery procedure was doing fine to 100% finished. But after pressing any key, the above warning kept appear, no matter how many times i had re-installed by recovery disk or (every time reached 100% )or by using full version of window Xp.
Neither it worked by formatting the HD I had connected it with a IDE2USB link to my friend's XP laptop nor changing another HD.
I excluded the HD problem, then i guess it might be the BIOS was being hacked (?) I downloaded the BIOS update to see whether it works or not?
but the result was disappointing. It just stop at the step 4 of the updating procedure, it just freeze at performing flash initiating step.
I want to take out the CMOS battery for few seconds, but i am not that pro and i might cause damage by improper handling.
Could anyone tell me what happen to my computer and how i can show the above problem?

Hello Wai
If your unit make troubles after recovery image installation it is probably hardware related issue. Can you enter BIOS settings as usual? If not I am afraid the BIOS chip is damaged. It happen if BIOS update is interrupted whatever the reason can be.
Removing CMOS battery doesnt work like on desktps. Forget it!

TS3694 Hi,I have an iphone 3g that is "not" jailbroken,nor have I tried,however,I had been having problems with it shuting down&not starting again so I updated&tried to restore only to have an error 1015.The iphone is now stuck on the connect to itunes,pl

Hi, I have an Iphone 3g that is "Not" jailbroken, nor do I want it to be jailbroken. However, I had been having problems with it shuting down and not starting again. So, I tried to update and restore only to get an "error" 1015.
It is now stuck on "connect to itunes"
Any help would be great as this is a factory unlocked phone

Apple in no way blocks devices.
Carriers can blacklist devices from their network. If that is what has occurred, only the carrier can remove the blacklist. This should have nothing to do with your ability to activate the device and use it as an iPod.

Problem with Java Memory "Could not reserve enough space for object heap"

Hi gurus,
I am not an expert with Java´s configuration, and I have a situation that I don´t understand. First of all, I am working at Centos 6.2 with jdk_1.6 and Tomcat 7.
The problem is...
- If I run Tomcat with JAVA_OPTS="-Xmx128m"* (at catalina.sh) all works fine.
- If I run Tomcat with JAVA_OPTS="-Xmx512m"* (at catalina.sh) an error appears:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
This appear when I run java -version or when I try to stop Tomcat, and the Tomcat isn´t able to stop.
The strange thing is that my server has more than 200M free in physical memory. So, why Tomcat isn´t able to stop? and Why Java doesn´t use the free memory in my server?
Thanks in advanced.

Hello EJP, thanks for your answer.
I have explained bad.
The server has 703M free when Tomcat is stopped. I had mentioned that my server has more than 200M free in physical memory when Tomcat is running with JAVA_OPTS="-Xmx512m", so I don´t understand why these errors appear.
Do you understand me?
Recently I have checked the swap memory, and it is disabled. In spite of swap memory is disabled I think java wouldn´t need this memory because it has free physical memory
Thanks again.

Problem with child tag - Could not resolve x to a component implementation.

Hello.
I am writing some chart component and got a problem setting property via child tag. Property is a custom class.
My directory structure:
Makefile oxcharts Session.vim stats.as stats.mxml stats.swf
./oxcharts:
ColumnChart.as MyTest.as
stats.mxml:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:oxcharts="oxcharts.*">
    <oxcharts:ColumnChart id="myChart" showDataTips="true" width="600" height="310">
        <oxcharts:test x="5"></oxcharts:test>
     </oxcharts:ColumnChart>
</mx:Application>
ColumnChart.as:
package oxcharts {
    public class ColumnChart extends UIComponent {
        public var test:MyTest;
MyTest.as:
package oxcharts {
    public class MyTest {
        public var x:Number;
I got this error:
Error: Could not resolve <oxcharts:test> to a component implementation.
I guess something wrong with imports. Setting Number property via child tag works just fine.

I'm gonna give a clerear example, I hope it'll help you better understand what I mean let's say I have a custom class named Login:
package ec
         [Bindable]
     public class Login
          public var ID:int;
          public var Role:String;
          public function Login()
And I need to use this class within MyAmazingCanvas, so my main app will be like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:oxcharts="ec.*">
     <mx:Script>
          <![CDATA[
               import ec.Login;
               [Bindable]
               private var myLoginStatus:Login=new Login();
               private function setLoginData():void{
                    myLoginStatus.ID=myID.text
                    myLoginStatus.Role=myRole.text;
          ]]>
     </mx:Script>
     <oxcharts:MyAmazingCanvas id="myCustomComp" myPublicNumber="323" LoginStatus="{myLoginStatus}" />
     <mx:TextInput id="myID" />
     <mx:TextInput id="myRole" />
     <mx:Button id="setData" label="Set Data" click="setLoginData()" />
</mx:Application>
When I said at the top level I meant outside the scope of any function, altough is not a requierement, you can as well set it at a function level.

Problem with Language Import (could not create cofile)

Hi everybody
I'm trying to load the language pack "Spanish", but falls and gives me the following message
"could not create cofile"
Somebody could give me some indication on how to overcome this mistake, I've seen out there and some queries, but I have not overcome my problem!
I have created the "Transport System" and charged the language in "DEV Server," but I can not bring it to "test" if the attempt to import "TCode SMLT" gives me the error above.
thanks

this is action log!
@5B\QInformation@     Start import (state:initial)
@5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
@5B\QInformation@     Version: 700.F.15
@5B\QInformation@     Step INIT ...
@5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
@5B\QInformation@     ... configuration "Selective Language Import"
@5B\QInformation@     ... executed successfully
@5B\QInformation@     Step DISASSEMBLE ...
@5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
@5B\QInformation@     ... do not overwrite data files and cofiles (settings)
@5C\QError@     Could not create cofile
@5B\QInformation@     Restart import (state:lc_disassemble)
@5B\QInformation@     ... system date: 23.08.2008 system time: 16:46:21
@5B\QInformation@     Step DISASSEMBLE ...
@5B\QInformation@     ... system date: 23.08.2008 system time: 16:46:21
@5B\QInformation@     ... do not overwrite data files and cofiles (settings)
@5C\QError@     Could not create cofile
@5B\QInformation@     Restart import (state:lc_disassemble)
@5B\QInformation@     ... system date: 23.08.2008 system time: 17:05:01
@5B\QInformation@     Step DISASSEMBLE ...
@5B\QInformation@     ... system date: 23.08.2008 system time: 17:05:01
@5B\QInformation@     ... do not overwrite data files and cofiles (settings)
@5C\QError@     Could not create cofile
Test in STMS
RFC connections Ok
Connection Test   Ok
Transport Tool      Ok
Transport Directory Ok
Check Transport Directory                                 24.08.2008 18:49:28
       ECP System ECP
           Transport Directory
               bin
mts-sap\sapmnt\trans\bin
               buffer
mts-sap\sapmnt\trans\buffer
               cofiles
mts-sap\sapmnt\trans\cofiles
               data
mts-sap\sapmnt\trans\data
               log
mts-sap\sapmnt\trans\log
               sapnames
mts-sap\sapmnt\trans\sapnames
               tmp
mts-sap\sapmnt\trans\tmp

Problem with FX (CS6) "Could not complete your request due to a program error."

This only happened after I got the master collection. FX effects in Photoshop CS6 do not work, at all. Attempting to use any of them result in the above quoted "Could not complete your request due to a program error."
I've trashed the prefs, uninstalled/reinstalled, updated drivers, REFORMATTED MY HARD DRIVE, contacted customer support, and about every other troubleshoot short of sacraficing a goat. No cigar.
Error log gives me the following:
" ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed"
Same error, every time.
Windows 7, 64x
16gb DDR3
AMD FX(tm)-4100 Quad-Core Processor [3.61 GHz]
AMD Radeon HD 7800 Series
Not running this 'Suitcase' thing. At a complete loss.

Removing the whole folder worked, which, is good enough for me. I think what happened was a finaggle with the install, as I already had PS installed when I overlayed the master collection on top of it, still doesn't explain it not working after the reformat, might have been linked to my backup/scratch disk in some fashion and broke it. I'm not quite sure how the problem persisted.
Don't install ps over ps, I guess ^^
Aha, it was Prefs.
Thank you! Greatly, been sitting on this problem for months now, no ammount of Googling would help. I can finally go back to work (that I've been sitting on this whole time).

Problems with 3.6 could not resolve s:ViewNavigatorApplication

Hi,
I'm trying to use 3.6 and not having any luck...
I have FB 4.7 (64-bit) on Windows.
I have downloaded from here; http://www.adobe.com/devnet/air/air-sdk-download.html
I have completed the steps here; http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
I have merged the sdk as I would have done for 3.5,3.4 etc.
Now, when I set the SDK to the 3.6 one, I get the error;
"Could not resolve <s:ViewNavigatorApplication> to a component implementation."
_MUST_ be something basic I'm doing wrong here!
Help!
G

Now I'm confused.
The text link you mention states that Flex users should take the SDK version without the compiler. BUT....
the http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html page says to download the SDK from
http://labs.adobe.com/downloads/asc2.html
but this page now redirects to:
http://helpx.adobe.com/air/kb/archived-air-sdk-version.html
which contains a large list of archived SDK's. So that help page never really says which version of the SDK to use - with or without the compiler. But other forum posts have implied its suppose to be the one with the compiler.
Now since we're overlaying the ...plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK folder that would make sense.
So my questions are:
   Do we use the version with or without the compiler to do the overlay?
   Can we get Adobe to update that help page to reflect what we're really suppose to do?
AND
   Does Flash Builder use this overlaid AIR SDK with any selected Flex SDK as long as the project settings has the 'Include Adobe AIR libraries' checkbox selected?
   What if I've configured the Apache 4.9.1 (Doesn't this have AIR SDK 3.4 embedded within it? - yeah I chose that option in the download installer) as my Flex SDK, then will the 'Include Adobe AIR libraries' checkbox still use the AIRSDK 3.6 I just overlaid?
Is it just me, or is this just getting more and more confusing? Can we perhaps get a AIR SDK combo box to go beside the Flex combo box and when we check the 'Include Adobe AIR libraries' then we can select the AIR SDK we want? And get a 'configure AIR SDKs...' link too?

Problem with Server It would not start up again .. please help

Hi All,
I recently decided to download a copy of the solaris patch, started the installation and then went home, next morning, I saw that the server would not boot up again.
One thing I must say is that I think i played around with the mount point and partitions as I wanted to get a big chunk of drive space free for the Oracle database which I was looking to install. Now after rebooting, this is that happens.
an out of sync boot archive was detected on /dev/dsk/c1t0d0s0 The boot archive is a cache if files used during boot and should be kept in sync to ensure proper system operation
Do you wish to automatically update this boot archive ?
If i choose yes
** /dev/rdsk/c1t0d0s0
** LAst Mounted on /
** Phase 1 Check Blocks and Sizes
** Phase 2 Check pathnames
After this
The screen comes up with
UNREF DIR I = 379564 OWNER = ROOT MODE = 40755
SIZE = 512 MTIME = SEP 18 09:06 2008
If i type in Y, the screen keeps coming up with similar lines but different numbers again and again.
Can someone help me here, I am quite new to Solaris.
Thanks in advance

Hello bhar.suman,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario

The Sun Java System Application Server could not start

Hello All,
I downloaded the Java Pet Store example from sun's website and followed the instructions for installation. After successful installation, I tried to deploy the project and gave the following error
C:\Documents and Settings\sina\My Documents\Projects\services\nbproject\build-impl.xml:194: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 20 seconds)
The link above points to the following line in the build-impl.xml file
<nbdeploy debugmode="false" forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" clientModuleUri="${client.module.uri}"/>
Can any one help whats wrong.An early response will be highly appreciated.
Kind Regards.
Hasnain Javed.

Hi,
Maybe you already got this fix but here is a suggestion, a snippet from the readme index,html of the petstore download
# Start the Sun Java System Application Server and the JavaDB database. To do so, open a command prompt and change directory to <javaeesdk.home>/bin and issue the following commands:
asadmin start-database
asadmin start-domain
# Change directory to <petstore.home> and enter the following commands
ant setup
ant run
This will setup, build and deploy the petstore on the application server, and then launch the application homepage in your default browser.
The "ant setup" that you run from <petstore.home> (petstore.home is the directory where petstore is installed or where you unzipped it) will populate the database wth data and setup the proper database tables etc that are used by the application.
hth,
Sean

Problem with deploying : SDM could not start the J2EE cluster on the host .

Similar Messages

Maybe you are looking for