Problem With DRI

i am having a very difficult time trying to get DRI to work properly on my machine. I am using the open source ati driver and have changed my xorg accordingly, however, when i run 'glxgears', the following message appears:
libGL warning: 3D driver returned no fbconfigs.
libGL error: InitDriver failed
libGL error: reverting to (slow) indirect rendering
i have looked through google and found nothing and was thinking that perhaps the forum could yield some better results. here is my xorg.conf for reference:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "dri"
Load "record"
Load "glx"
Load "GLcore"
Load "freetype"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 200 # mm
Identifier "Monitor0"
VendorName "PTS"
ModelName "1911-TLXB"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "false" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
Option "AGPMode" "4" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
Option "EnablePageFlip" "on" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
Option "IgnoreEDID" "true" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "on" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Option "DRI" "true" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon X1200 Series"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1360x768@60" "1280x768@60" "1024x768@60"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
thanks a million for your help!

thanks for your reply. i added that section but unfortunatly, it didnt work. i also added a few more sections to enable aiglx support, but they are yet to work. i know that the driver can work, as i had dri with ubuntu. any help or suggestions would be great. also, here is my new xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "dri"
Load "record"
Load "glx"
Load "GLcore"
Load "freetype"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 200 # mm
Identifier "Monitor0"
VendorName "PTS"
ModelName "1911-TLXB"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "false" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
Option "AGPMode" "4" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
Option "EnablePageFlip" "on" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
Option "IgnoreEDID" "true" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "on" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Option "DRI" "true" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon X1200 Series"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1360x768@60" "1280x768@60" "1024x768@60"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection

Similar Messages

VArious problems with intel graphic card

There is an old regarding part of this subject with no improvement. I have a 943/940GML graphic card. Normally the frame rate should synchronize with vfresh but it does not seems to works well: glxgears is not smooth at all unless you move the mouse on the windows. Running it with
<option name="vblank_mode" value="0" />
fix the problem.
Apart from that I get better performance with the lts 2.6.32 kernel than with 3.0. This is noticeable (I have less CPU time when I let googleearth rotate the earth).
I had several problems with this driver. I have:
Option "DebugWait" "on" in xorg.conf (otherwise fonts are broken)
options i915 powersave=0 in modprobe.conf (otherwise the screen blink every minute or so)
the problem with dri mentioned.
Moreover each time I upgrade my system, there is one chance out of two that a new regression will appear. What is it with this driver? Why can't the devs secure a stable version? I know I should report bugs upstream but I am tired now. This is a permanent alpha driver.

This forum is for suite specific issues only. Please post in the Photoshop forum.
Bob

Problems with x-fi dri

for some reason every other time i restart my computer, sound doesn't work and windows prompts me to install my sound driver as (Multimedia Audio Controller). if i click cancel and restart comp again it'll be fine. but restart again, same story. however today, i actually had to reinstall the driver because i kept restarting and it wasn't working at all. what could be causing this? could it be my motherboard or some conflict with the onboard audio? i have the x-fi platinum, latest driver, my mobo is a gigabyte ga-965p-s3, latest bios/drivers. i've disabled the 'azalia codec' (onboard sound) in my bios. everything else on my system is fine, and i didn't have this problem on my old motherboard. anyone else having this same problem? any suggestions? thanks in advance.
marcus

I have the same problem with my new pc (mb asus p5ld2se with micro intel core 2 duo and windows xp sp2),?and i hadn't it with the old (mb asus p4b533 with micro intel pentium 4 600MHz and windows xp sp2). solution? please

Problems with Audigy SE - Cannot update dri

I've just installed Audigy SE 7.. While the sound is working just fine, I still have one problem with it:
I was only able to install the driver that came with the cd. I've downloaded the latest driver from the creative website, SB24_VTDRV_LB__04_0077.exe, but it says that I have no compatible hardware installed. (!!!)
I use Windows XP professional.
thanks in advance
Message Edited by Evenfiel on 07-23-2008 :4 AMMessage Edited by Evenfiel on 07-23-2008 :5 AMMessage Edited by Evenfiel on 07-23-2008 :36 AMMessage Edited by Evenfiel on 07-23-2008 :37 AM

I was asking if you purchased the Audigy card separately or did it came with your computer. If the card came with your computer, you may have an OEM product.
You might also want to check if the sound card is installed properly, go to "Device Manager" and check if the Audigy SE is listed. If you continue to experience difficulty, please get in touch with support for further assistance.

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

Problems with Steam - Dota2 and ETS2

Hello
I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
Lenovo Y580 - GTX660M
After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 1455 != 1454, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Using breakpad crash handler
Setting breakpad minidump AppID = 570
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system supports the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
GL_MAX_SAMPLES_EXT: 32
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
Did not detect any valid joysticks.
WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
WARNING: unable to link log_color and log_color because one or more is a ConCommand.
WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
WARNING: unable to link log_level and log_level because one or more is a ConCommand.
WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
Load a scaleform font provider?
Creating D3D9 device with D3DCREATE_MULTITHREADED
IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: DISABLED
##### swap interval = 0 swap limit = 1 #####
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
!! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
Installing breakpad exception handler for appid(steam)/version(1405474565_client)
[0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Setting breakpad minidump AppID = 227300
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 80
Current serial number in output stream: 82
Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
sudo journalctl
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
sudo nano /var/log/Xorg.8.log
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 887.399] X Protocol Version 11, Revision 0
[ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
[ 887.399] Build Date: 27 June 2014 07:32:26PM
[ 887.399]
[ 887.399] Current version of pixman: 0.32.6
[ 887.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
[ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 887.400] (==) ServerLayout "Layout0"
[ 887.400] (==) No screen section available. Using defaults.
[ 887.400] (**) |-->Screen "Default Screen Section" (0)
[ 887.400] (**) | |-->Monitor "<default monitor>"
[ 887.400] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 887.400] (**) | |-->Device "DiscreteNvidia"
[ 887.400] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 887.400] (**) Option "AutoAddDevices" "false"
[ 887.400] (**) Option "AutoAddGPU" "false"
[ 887.400] (**) Not automatically adding devices
[ 887.400] (==) Automatically enabling devices
[ 887.400] (**) Not automatically adding GPU devices
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 887.401] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 887.401] (==) |-->Input Device "<default pointer>"
[ 887.401] (==) |-->Input Device "<default keyboard>"
[ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 887.401] (II) Loader magic: 0x811cc0
[ 887.401] (II) Module ABI versions:
[ 887.401] X.Org ANSI C Emulation: 0.4
[ 887.401] X.Org Video Driver: 15.0
[ 887.401] X.Org XInput driver : 20.0
[ 887.401] X.Org Server Extension : 8.0
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 887.401] setversion 1.4 failed: Permission denied
[ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 887.403] Initializing built-in extension Generic Event Extension
[ 887.404] Initializing built-in extension SHAPE
[ 887.404] Initializing built-in extension MIT-SHM
[ 887.404] Initializing built-in extension XInputExtension
[ 887.404] Initializing built-in extension XTEST
[ 887.404] Initializing built-in extension BIG-REQUESTS
[ 887.404] Initializing built-in extension SYNC
[ 887.404] Initializing built-in extension XKEYBOARD
[ 887.404] Initializing built-in extension XC-MISC
[ 887.404] Initializing built-in extension SECURITY
[ 887.404] Initializing built-in extension XINERAMA
[ 887.404] Initializing built-in extension XFIXES
[ 887.404] Initializing built-in extension RENDER
[ 887.404] Initializing built-in extension RANDR
[ 887.404] Initializing built-in extension COMPOSITE
[ 887.404] Initializing built-in extension DAMAGE
[ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
[ 887.404] Initializing built-in extension DOUBLE-BUFFER
[ 887.404] Initializing built-in extension RECORD
[ 887.404] Initializing built-in extension DPMS
[ 887.404] Initializing built-in extension Present
[ 887.404] Initializing built-in extension DRI3
[ 887.404] Initializing built-in extension X-Resource
[ 887.404] Initializing built-in extension XVideo
[ 887.404] Initializing built-in extension XVideo-MotionCompensation
[ 887.404] Initializing built-in extension XFree86-VidModeExtension
[ 887.404] Initializing built-in extension XFree86-DGA
[ 887.404] Initializing built-in extension XFree86-DRI
[ 887.404] Initializing built-in extension DRI2
[ 887.404] (II) "glx" will be loaded by default.
[ 887.404] (II) LoadModule: "dri2"
[ 887.404] (II) Module "dri2" already built-in
[ 887.404] (II) LoadModule: "glamoregl"
[ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
[ 887.454] compiled for 1.15.0, module version = 0.6.0
[ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.454] (II) LoadModule: "glx"
[ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
[ 887.495] compiled for 4.0.2, module version = 1.0.0
[ 887.495] Module class: X.Org Server Extension
[ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 887.495] Loading extension GLX
[ 887.495] (II) LoadModule: "nvidia"
[ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 887.500] compiled for 4.0.2, module version = 1.0.0
[ 887.500] Module class: X.Org Video Driver
[ 887.500] (II) LoadModule: "mouse"
[ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 887.502] (II) Module mouse: vendor="X.Org Foundation"
[ 887.502] compiled for 1.15.0, module version = 1.9.0
[ 887.502] Module class: X.Org XInput Driver
[ 887.502] ABI class: X.Org XInput driver, version 20.0
[ 887.502] (II) LoadModule: "kbd"
[ 887.502] (WW) Warning, couldn't open module kbd
[ 887.502] (II) UnloadModule: "kbd"
[ 887.502] (II) Unloading kbd
[ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 887.502] (--) using VT number 1
[ 887.502] (II) Loading sub module "fb"
[ 887.502] (II) LoadModule: "fb"
[ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 887.504] (II) Module fb: vendor="X.Org Foundation"
[ 887.504] compiled for 1.15.2, module version = 1.0.0
[ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 887.504] (II) Loading sub module "wfb"
[ 887.504] (II) LoadModule: "wfb"
[ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 887.506] (II) Module wfb: vendor="X.Org Foundation"
[ 887.506] compiled for 1.15.2, module version = 1.0.0
[ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.506] (II) Loading sub module "ramdac"
[ 887.506] (II) LoadModule: "ramdac"
[ 887.506] (II) Module "ramdac" already built-in
[ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 887.506] (==) NVIDIA(0): RGB weight 888
[ 887.506] (==) NVIDIA(0): Default visual is TrueColor
[ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
[ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
[ 887.507] (**) NVIDIA(0): Ignoring EDIDs
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 887.507] (**) NVIDIA(0): mode
[ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
[ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 891.008] (--) NVIDIA(0): none
[ 891.008] (II) NVIDIA(0): Validated MetaModes:
[ 891.008] (II) NVIDIA(0): "NULL"
[ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 891.008] (--) Depth 24 pixmap format is 32 bpp
[ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 891.008] (II) NVIDIA: access.
[ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 891.013] (II) NVIDIA(0): Config Options in the README.
[ 891.013] (II) NVIDIA(0): Setting mode "NULL"
[ 891.028] Loading extension NV-GLX
[ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 891.035] (==) NVIDIA(0): Backing store enabled
[ 891.035] (==) NVIDIA(0): Silken mouse enabled
[ 891.035] (==) NVIDIA(0): DPMS enabled
[ 891.035] Loading extension NV-CONTROL
[ 891.036] (II) Loading sub module "dri2"
[ 891.036] (II) LoadModule: "dri2"
[ 891.036] (II) Module "dri2" already built-in
[ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 891.036] (--) RandR disabled
[ 891.044] (II) Initializing extension GLX
[ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
[ 891.100] (**) Option "CorePointer" "on"
[ 891.100] (**) <default pointer>: always reports core events
[ 891.100] (WW) <default pointer>: No Device specified, looking for one...
[ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
[ 891.146] (==) <default pointer>: Protocol: "Auto"
[ 891.146] (**) <default pointer>: always reports core events
[ 891.146] (**) Option "Device" "/dev/input/mice"
[ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 891.200] (**) <default pointer>: Buttons: 9
[ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 891.200] (**) <default pointer>: (accel) acceleration profile 0
[ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
[ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 891.493] (II) LoadModule: "kbd"
[ 891.494] (WW) Warning, couldn't open module kbd
[ 891.494] (II) UnloadModule: "kbd"
[ 891.494] (II) Unloading kbd
[ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 891.494] (EE) No input driver matching `kbd'
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 891.499] setversion 1.4 failed: Permission denied
[ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 891.499] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 892.695] (II) UnloadModule: "mouse"
[ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 892.723] (EE) Server terminated successfully (0). Closing log file.
Last edited by Akikyo (2014-07-24 21:04:45)

I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs.

Problems with home button on iPhone 4

problems with home button on iphone 4

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

[SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!
I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
The message shows me when I run "optirun":
[ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ 5454.262776] [ERROR]Aborting because fallback start is disabled.
I've tried with wiki's solutions, forums solutions...
Configurations files:
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00.0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
lspci |grep NVIDIA:
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
I hope can help me
Thanks!
Last edited by surrealistic (2013-11-04 18:46:35)

My /var/log/Xorg.8.log:
[ 337.161]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 337.161] X Protocol Version 11, Revision 0
[ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
[ 337.161] Build Date: 01 November 2013 05:10:48PM
[ 337.161]
[ 337.161] Current version of pixman: 0.30.2
[ 337.161] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
[ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 337.161] (==) ServerLayout "Layout0"
[ 337.161] (==) No screen section available. Using defaults.
[ 337.161] (**) |-->Screen "Default Screen Section" (0)
[ 337.161] (**) | |-->Monitor "<default monitor>"
[ 337.161] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 337.161] (**) | |-->Device "DiscreteNvidia"
[ 337.161] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 337.161] (**) Option "AutoAddDevices" "false"
[ 337.161] (**) Option "AutoAddGPU" "false"
[ 337.161] (**) Not automatically adding devices
[ 337.161] (==) Automatically enabling devices
[ 337.161] (**) Not automatically adding GPU devices
[ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 337.162] Entry deleted from font path.
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 337.162] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 337.162] (==) |-->Input Device "<default pointer>"
[ 337.162] (==) |-->Input Device "<default keyboard>"
[ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 337.162] (II) Loader magic: 0x7fdc20
[ 337.162] (II) Module ABI versions:
[ 337.162] X.Org ANSI C Emulation: 0.4
[ 337.162] X.Org Video Driver: 14.1
[ 337.162] X.Org XInput driver : 19.1
[ 337.162] X.Org Server Extension : 7.0
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 337.162] setversion 1.4 failed
[ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[ 337.163] Initializing built-in extension Generic Event Extension
[ 337.163] Initializing built-in extension SHAPE
[ 337.163] Initializing built-in extension MIT-SHM
[ 337.163] Initializing built-in extension XInputExtension
[ 337.163] Initializing built-in extension XTEST
[ 337.163] Initializing built-in extension BIG-REQUESTS
[ 337.163] Initializing built-in extension SYNC
[ 337.163] Initializing built-in extension XKEYBOARD
[ 337.163] Initializing built-in extension XC-MISC
[ 337.163] Initializing built-in extension SECURITY
[ 337.163] Initializing built-in extension XINERAMA
[ 337.163] Initializing built-in extension XFIXES
[ 337.163] Initializing built-in extension RENDER
[ 337.163] Initializing built-in extension RANDR
[ 337.164] Initializing built-in extension COMPOSITE
[ 337.164] Initializing built-in extension DAMAGE
[ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
[ 337.164] Initializing built-in extension DOUBLE-BUFFER
[ 337.164] Initializing built-in extension RECORD
[ 337.164] Initializing built-in extension DPMS
[ 337.164] Initializing built-in extension X-Resource
[ 337.164] Initializing built-in extension XVideo
[ 337.164] Initializing built-in extension XVideo-MotionCompensation
[ 337.164] Initializing built-in extension XFree86-VidModeExtension
[ 337.164] Initializing built-in extension XFree86-DGA
[ 337.164] Initializing built-in extension XFree86-DRI
[ 337.164] Initializing built-in extension DRI2
[ 337.164] (II) LoadModule: "glx"
[ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Server Extension
[ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 337.172] Loading extension GLX
[ 337.172] (II) LoadModule: "nvidia"
[ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Video Driver
[ 337.172] (II) LoadModule: "mouse"
[ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 337.172] (II) Module mouse: vendor="X.Org Foundation"
[ 337.172] compiled for 1.14.0, module version = 1.9.0
[ 337.172] Module class: X.Org XInput Driver
[ 337.172] ABI class: X.Org XInput driver, version 19.1
[ 337.172] (II) LoadModule: "kbd"
[ 337.173] (WW) Warning, couldn't open module kbd
[ 337.173] (II) UnloadModule: "kbd"
[ 337.173] (II) Unloading kbd
[ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 337.173] (--) using VT number 1
[ 337.173] (II) Loading sub module "fb"
[ 337.173] (II) LoadModule: "fb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 337.173] (II) Module fb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 337.173] (II) Loading sub module "wfb"
[ 337.173] (II) LoadModule: "wfb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 337.173] (II) Module wfb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "shadow"
[ 337.173] (II) LoadModule: "shadow"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 337.173] (II) Module shadow: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.1.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "ramdac"
[ 337.173] (II) LoadModule: "ramdac"
[ 337.173] (II) Module "ramdac" already built-in
[ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 337.174] (==) NVIDIA(0): RGB weight 888
[ 337.174] (==) NVIDIA(0): Default visual is TrueColor
[ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
[ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
[ 337.174] (**) NVIDIA(0): Ignoring EDIDs
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 337.174] (**) NVIDIA(0): mode
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 341.309] (EE) NVIDIA(0): README for additional information.
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 341.309] (II) UnloadModule: "nvidia"
[ 341.309] (II) UnloadSubModule: "shadow"
[ 341.309] (II) UnloadSubModule: "wfb"
[ 341.309] (II) UnloadSubModule: "fb"
[ 341.309] (EE) Screen(s) found, but none have a usable configuration.
[ 341.309] (EE)
Fatal server error:
[ 341.309] (EE) no screens found(EE)
[ 341.309] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 341.309] (EE)
[ 341.309] (EE) Server terminated with error (1). Closing log file.
dmesg |grep bbswitch:
[ 13.570577] bbswitch: version 0.7
[ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 13.570687] bbswitch: detected an Optimus _DSM function
[ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 13.572354] bbswitch: disabling discrete graphics
[ 261.419114] bbswitch: enabling discrete graphics
[ 278.445698] bbswitch: disabling discrete graphics
[ 279.055257] bbswitch: enabling discrete graphics
[ 286.292315] bbswitch: disabling discrete graphics
[ 291.911052] bbswitch: enabling discrete graphics
[ 310.011289] bbswitch: disabling discrete graphics
[ 336.982794] bbswitch: enabling discrete graphics
[ 349.526470] bbswitch: enabling discrete graphics
I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work

Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi

Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/

HalberdBlue wrote:
Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
jutapa

[SOLVED?] Problem with nVidia card

This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)

the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.

Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)

i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Problem with hdradeon driver

i have a problem with the opensource hdradeon driver.
Here is the output of
lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
Here's my /etc/X11/xorg.conf.d/10-monitor.conf file:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "hdradeon"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024_75.00"
EndSubSection
EndSection
Here is a part of the Xorg.0.log file
[ 54.169]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 54.169] X Protocol Version 11, Revision 0
[ 54.169] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 54.169] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
[ 54.170] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
[ 54.170] Build Date: 24 August 2010 01:44:37PM
[ 54.170]
[ 54.170] Current version of pixman: 0.18.4
[ 54.170] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 54.170] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 54.170] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 02:17:07 2004
[ 54.170] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 54.171] (==) No Layout section. Using the first Screen section.
[ 54.171] (**) |-->Screen "Screen0" (0)
[ 54.171] (**) | |-->Monitor "Monitor0"
[ 54.171] (**) | |-->Device "Device0"
[ 54.171] (==) Automatically adding devices
[ 54.171] (==) Automatically enabling devices
[ 54.171] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 54.171] Entry deleted from font path.
[ 54.171] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 54.171] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 54.171] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 54.171] (II) Loader magic: 0x7d4880
[ 54.171] (II) Module ABI versions:
[ 54.171] X.Org ANSI C Emulation: 0.4
[ 54.171] X.Org Video Driver: 8.0
[ 54.171] X.Org XInput driver : 11.0
[ 54.171] X.Org Server Extension : 4.0
[ 54.172] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 54.173] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 54.173] (II) LoadModule: "extmod"
[ 54.173] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 54.173] (II) Module extmod: vendor="X.Org Foundation"
[ 54.173] compiled for 1.9.0, module version = 1.0.0
[ 54.173] Module class: X.Org Server Extension
[ 54.173] ABI class: X.Org Server Extension, version 4.0
[ 54.173] (II) Loading extension MIT-SCREEN-SAVER
[ 54.173] (II) Loading extension XFree86-VidModeExtension
[ 54.173] (II) Loading extension XFree86-DGA
[ 54.173] (II) Loading extension DPMS
[ 54.173] (II) Loading extension XVideo
[ 54.173] (II) Loading extension XVideo-MotionCompensation
[ 54.173] (II) Loading extension X-Resource
[ 54.173] (II) LoadModule: "dbe"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 54.174] (II) Module dbe: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.0.0
[ 54.174] Module class: X.Org Server Extension
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (II) Loading extension DOUBLE-BUFFER
[ 54.174] (II) LoadModule: "glx"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 54.174] (II) Module glx: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.0.0
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (==) AIGLX enabled
[ 54.174] (II) Loading extension GLX
[ 54.174] (II) LoadModule: "record"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 54.174] (II) Module record: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.13.0
[ 54.174] Module class: X.Org Server Extension
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (II) Loading extension RECORD
[ 54.174] (II) LoadModule: "dri"
[ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 54.175] (II) Module dri: vendor="X.Org Foundation"
[ 54.175] compiled for 1.9.0, module version = 1.0.0
[ 54.175] ABI class: X.Org Server Extension, version 4.0
[ 54.175] (II) Loading extension XFree86-DRI
[ 54.175] (II) LoadModule: "dri2"
[ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 54.175] (II) Module dri2: vendor="X.Org Foundation"
[ 54.175] compiled for 1.9.0, module version = 1.2.0
[ 54.175] ABI class: X.Org Server Extension, version 4.0
[ 54.175] (II) Loading extension DRI2
[ 54.175] (II) LoadModule: "radeonhd"
[ 54.175] (II) Loading /usr/lib/xorg/modules/drivers/radeonhd_drv.so
[ 54.176] (II) Module radeonhd: vendor="AMD GPG"
[ 54.176] compiled for 1.9.0, module version = 1.3.0
[ 54.176] Module class: X.Org Video Driver
[ 54.176] ABI class: X.Org Video Driver, version 8.0
[ 54.176] (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
[ 54.176] RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
[ 54.176] R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
[ 54.176] M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
[ 54.176] M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
[ 54.176] M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
[ 54.176] RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
[ 54.176] R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
[ 54.176] M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
[ 54.176]
[ 54.176] (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf
[ 54.176] (--) using VT number 7
[ 54.181] (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
[ 54.181] (**) RADEONHD(0): Selected EXA 2D acceleration.
[ 54.181] (II) RADEONHD(0): Card not in database: 0x954F:0x174B:0x1341; using generic modesetting.
[ 54.181] If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x954F:0x174B:0x1341: <name of board>
and *please* describe the problems you are seeing
in your message.
[ 54.181] (--) RADEONHD(0): Detected an RV710 on an unidentified card
[ 54.181] (II) RADEONHD(0): Mapped IO @ 0x30200000 to 0x7fec7fbe3000 (size 0x00010000)
[ 54.181] (II) RADEONHD(0): PCIE Card Detected
[ 54.181] (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
[ 54.183] (II) RADEONHD(0): ATOM BIOS Rom:
[ 54.183] SubsystemVendorID: 0x174b SubsystemID: 0x1341
[ 54.183] IOBaseAddress: 0x2000
[ 54.183] Filename: 1E1341SA.AM1
[ 54.183] BIOS Bootup Message: RV710 HM AMD DDR2 64BIT 600E/400M
[ 54.183] (II) RADEONHD(0): Analog TV Default Mode: 8
[ 54.183] (II) RADEONHD(0): Found default TV Mode PAL
[ 54.183] (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
[ 54.183] (II) RADEONHD(0): Using only 262144kB of the total 1048576kB.
[ 54.183] (--) RADEONHD(0): VideoRAM: 262144 kByte
[ 54.183] (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
[ 54.183] (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffec
[ 54.183] (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
[ 54.183] (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffec
[ 54.183] (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x104fec VRAM End: 0x10000000
[ 54.183] (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
[ 54.183] (II) RADEONHD(0): Default Engine Clock: 600000
[ 54.183] (II) RADEONHD(0): Default Memory Clock: 400000
[ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
[ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
[ 54.183] (II) RADEONHD(0): Maximum Pixel Clock: 400000
[ 54.183] (II) RADEONHD(0): Reference Clock: 27000
[ 54.183] (II) RADEONHD(0): Found libdri 5.4.0.
[ 54.183] drmOpenDevice: node name is /dev/dri/card0
[ 54.183] drmOpenDevice: open result is 10, (OK)
[ 54.183] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 54.183] drmOpenDevice: node name is /dev/dri/card0
[ 54.183] drmOpenDevice: open result is 10, (OK)
[ 54.183] drmOpenByBusid: drmOpenMinor returns 10
[ 54.183] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 54.183] (II) RADEONHD(0): Found libdrm 1.3.0.
[ 54.183] (II) RADEONHD(0): Found radeon drm 2.5.0.
[ 54.183] (II) Loading sub module "i2c"
[ 54.183] (II) LoadModule: "i2c"
[ 54.183] (II) Module "i2c" already built-in
[ 54.183] (II) RADEONHD(0): Reference Clock: 27000
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.183] (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
[ 54.184] (II) Loading sub module "ddc"
[ 54.184] (II) LoadModule: "ddc"
[ 54.184] (II) Module "ddc" already built-in
[ 54.184] (II) RADEONHD(0): Detected VGA mode.
[ 54.184] (**) RADEONHD(0): Using AtomBIOS for Crtcs
[ 54.184] (**) RADEONHD(0): Using AtomBIOS for PLLs
[ 54.184] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 54.184] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[ 54.184] (II) RADEONHD(0): Maximum Pixel Clock: 400000
[ 54.184] (II) RADEONHD(0): Reference Clock: 27000
[ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
[ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
[ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
[ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
[ 54.184] (II) RADEONHD(0): FirmwareInfo Revision 0104
[ 54.184] (II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
[ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
[ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
[ 54.184] (II) RADEONHD(0): Default Engine Clock: 600000
[ 54.184] (II) RADEONHD(0): Default Memory Clock: 400000
[ 54.184] (II) RADEONHD(0): Current Engine Clock: 599060
[ 54.184] (II) RADEONHD(0): Current Memory Clock: 396000
[ 54.184] (II) RADEONHD(0): Current Chip Voltage: 0
[ 54.184] (II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
[ 54.184] (II) RADEONHD(0): Power Management: Raw Ranges
[ 54.184] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
[ 54.184] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
[ 54.184] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
[ 54.184] (II) RADEONHD(0): PowerPlayInfo Revision 0501
[ 54.184] (EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
[ 54.184] (II) RADEONHD(0): Query for Get Chip Configs: not implemented
[ 54.184] (EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
[ 54.185] (II) RADEONHD(0): Power Management: Validated Ranges
[ 54.185] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
[ 54.185] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Power Management: Final Levels
[ 54.185] (II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.900 V
[ 54.185] (II) RADEONHD(0): Idle 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Slow2D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Fast2D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Slow3D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Fast3D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Max3D 650000 kHz / 550000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): User 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
[ 54.185] (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_4, RHD_HPD_0, { RHD_OUTPUT_UNIPHYB, RHD_OUTPUT_NONE } }
[ 54.185] (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_1, RHD_HPD_3, { RHD_OUTPUT_UNIPHYE, RHD_OUTPUT_DACA } }
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector VGA 1
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyB to Connector DVI-D 1
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyE to Connector DVI-I 2
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output AtomOutputDACB
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output AtomOutputUniphyB
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output AtomOutputUniphyE
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output AtomOutputDACA
[ 54.185] (II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
[ 54.185] (II) RADEONHD(0): Output VGA_1 has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-D_1 has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
[ 54.185] (II) RADEONHD(0): Calling DAC_LoadDetection
[ 54.191] (II) RADEONHD(0): DAC_LoadDetection Successful
[ 54.191] (II) RADEONHD(0): EDID for output VGA_1
[ 54.191] (II) RADEONHD(0): EDID for output DVI-D_1
[ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/digital
[ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/analog
[ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
[ 54.191] (WW) RADEONHD(0): No outputs definitely connected, trying again...
[ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
[ 54.191] (WW) RADEONHD(0): Unable to find initial modes
[ 54.191] (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support.
[ 54.191] (II) RADEONHD(0): Calling DAC_LoadDetection
[ 54.197] (II) RADEONHD(0): DAC_LoadDetection Successful
[ 54.197] (EE) RADEONHD(0): Failed to detect a connected monitor
[ 54.197]
Backtrace:
[ 54.197] 0: X (xorg_backtrace+0x28) [0x49f558]
[ 54.197] 1: X (0x400000+0x67939) [0x467939]
[ 54.197] 2: /lib/libpthread.so.0 (0x7fec7ef28000+0xf1c0) [0x7fec7ef371c0]
[ 54.197] 3: X (xf86InitViewport+0xbf) [0x480f6f]
[ 54.197] 4: X (InitOutput+0xacc) [0x47025c]
[ 54.197] 5: X (0x400000+0x2108d) [0x42108d]
[ 54.197] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fec7debbc4d]
[ 54.197] 7: X (0x400000+0x20de9) [0x420de9]
[ 54.198] Segmentation fault at address 0x24
[ 54.198]
Fatal server error:
[ 54.198] Caught signal 11 (Segmentation fault). Server aborting
[ 54.198]
[ 54.198]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 54.198] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 54.198]
Das heißt auf Deutsch dass ich die Xorg.0.log und noch paar andere Dateien reinkopiert habe.
Last edited by tupolew.eljam (2010-09-12 16:58:27)

I tried it with xf86-video-ati, but it didnt worked.
Heres the logfile:
[ 50.479]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 50.480] X Protocol Version 11, Revision 0
[ 50.480] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 50.480] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
[ 50.480] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
[ 50.480] Build Date: 24 August 2010 01:44:37PM
[ 50.480]
[ 50.480] Current version of pixman: 0.18.4
[ 50.480] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.480] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.480] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 05:14:54 2004
[ 50.481] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.481] (==) No Layout section. Using the first Screen section.
[ 50.481] (**) |-->Screen "Screen0" (0)
[ 50.481] (**) | |-->Monitor "Monitor0"
[ 50.481] (**) | |-->Device "Device0"
[ 50.481] (==) Automatically adding devices
[ 50.481] (==) Automatically enabling devices
[ 50.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50.481] Entry deleted from font path.
[ 50.481] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 50.481] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.482] (II) Loader magic: 0x7d4880
[ 50.482] (II) Module ABI versions:
[ 50.482] X.Org ANSI C Emulation: 0.4
[ 50.482] X.Org Video Driver: 8.0
[ 50.482] X.Org XInput driver : 11.0
[ 50.482] X.Org Server Extension : 4.0
[ 50.483] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 50.483] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50.483] (II) LoadModule: "extmod"
[ 50.483] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.483] (II) Module extmod: vendor="X.Org Foundation"
[ 50.483] compiled for 1.9.0, module version = 1.0.0
[ 50.483] Module class: X.Org Server Extension
[ 50.483] ABI class: X.Org Server Extension, version 4.0
[ 50.483] (II) Loading extension MIT-SCREEN-SAVER
[ 50.483] (II) Loading extension XFree86-VidModeExtension
[ 50.483] (II) Loading extension XFree86-DGA
[ 50.483] (II) Loading extension DPMS
[ 50.483] (II) Loading extension XVideo
[ 50.483] (II) Loading extension XVideo-MotionCompensation
[ 50.484] (II) Loading extension X-Resource
[ 50.484] (II) LoadModule: "dbe"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.484] (II) Module dbe: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.0.0
[ 50.484] Module class: X.Org Server Extension
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (II) Loading extension DOUBLE-BUFFER
[ 50.484] (II) LoadModule: "glx"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.484] (II) Module glx: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.0.0
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (==) AIGLX enabled
[ 50.484] (II) Loading extension GLX
[ 50.484] (II) LoadModule: "record"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.484] (II) Module record: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.13.0
[ 50.484] Module class: X.Org Server Extension
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (II) Loading extension RECORD
[ 50.484] (II) LoadModule: "dri"
[ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.485] (II) Module dri: vendor="X.Org Foundation"
[ 50.485] compiled for 1.9.0, module version = 1.0.0
[ 50.485] ABI class: X.Org Server Extension, version 4.0
[ 50.485] (II) Loading extension XFree86-DRI
[ 50.485] (II) LoadModule: "dri2"
[ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.485] (II) Module dri2: vendor="X.Org Foundation"
[ 50.485] compiled for 1.9.0, module version = 1.2.0
[ 50.485] ABI class: X.Org Server Extension, version 4.0
[ 50.485] (II) Loading extension DRI2
[ 50.485] (II) LoadModule: "xf86-video-radeonhd"
[ 50.486] (WW) Warning, couldn't open module xf86-video-radeonhd
[ 50.486] (II) UnloadModule: "xf86-video-radeonhd"
[ 50.486] (EE) Failed to load module "xf86-video-radeonhd" (module does not exist, 0)
[ 50.486] (EE) No drivers available.
[ 50.486]
Fatal server error:
[ 50.486] no screens found
[ 50.486]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 50.486] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 50.486]
Last edited by tupolew.eljam (2010-09-12 18:54:56)

Problem with i915 Intel driver panic..

Hello,
I just recently reinstalled Arch on my laptop. I have a problem with my laptop. When I went to install the Nvidia Optimus stuff and configure my Xorg.conf I was met with problems with the Intel Driver timing out. When I boot up I get the normal post screen, then grub, I then go to see the GDM login and instead of getting it I just get a black screen. When I remove the /etc/X11/xorg.conf.d/10-monitor.conf I can boot into Gnome Shell, else I have to switch run levels and login that way. I have every package up-to-date. And I haven't seen an /var/log/Xorg.0.log either else I would have posted it. One other thing is I have added my user account to the Bumblebee account. One other thing is when I move my web browser around my video flickers.. Any help I can receive with this would be greatly appreciated.
uname -a
Linux tux 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64 GNU/Linux
pacman -q xf86-video-intel:
xf86-video-intel 2.99.916-3
pacman -Q xorg-server
xorg-server 1.16.1-1
pacman -Q primus
primus 20131226-1
pacman -Q mesa
mesa 10.3.1-1
pacman -Q lib32-primus
lib32-primus 20131226-1
pacman -Q bbswitch
bbswitch 0.8-18
pacman -Q gdm
gdm 3.14.1-1
pacman -q systemd
systemd 216-3
dmesg | grep i915
[ 1.982842] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 2.099424] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.127859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.127862] i915 0000:00:02.0: registered panic notifier
[ 2.147795] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "monitor-LVDS" "Monitor0"
BusID "PCI:0:2:0"
EndSection
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "Keyboard0"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbVariant" ",qwerty"
EndSection
/etc/X11/xorg.conf.d/50-synaptic.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [disabled] [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia
xrandr -q
[adramalech@tux log]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.05*+
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 380307af800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=10ec Product=0665 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=0c45 Product=6430 Version=1208
N: Name="Laptop_Integrated_Webcam_2M"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=event12 mouse0
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.3.1
OpenGL core profile shading language version string: 1.40
OpenGL core profile context flags: (none)
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.3.1
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.3.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
sudo glxgears -info
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER = Mesa DRI Intel(R) Sandybridge Mobile
GL_VERSION = 3.0 Mesa 10.3.1
GL_VENDOR = Intel Open Source Technology Center
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_3DFX_texture_compression_FXT1 GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_APPLE_object_purgeable GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_compressed_texture_pixel_storage GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_clear_buffer_object GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_invalidate_subdata GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_multi_bind GL_ARB_seamless_cubemap_per_texture GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_INTEL_performance_query GL_ARB_conditional_render_inverted
VisualID 32, 0x20

Hi
I assume you have installed the graphic card driver from the Intel website and you use NOT a Toshiba graphic driver which was designed especially for the notebook usage.
Well, Toshiba recommend using the Toshiba drivers. In this case you should try to use the recommended graphic driver which you can download from the Toshiba driver page.

Problem With DRI

Similar Messages

Maybe you are looking for