Problem with driver initialization and associated application

I am recertifying a application suite on Solaris 10. This product works well on Solaris 8 & 9. It contains a special psuedo/streams device driver that allows applications to open a port to a daemon that manages clean up of these applications. The daemon is started by init (in the inittab file) and initially also opens a port to the special device. Synchronization in the driver is handled mutexs. The current problem appears to be that the daemon is started by the init process before the initialization routine of the driver is called that initializes the mutex. The result of the problem is that one of the Interrupt service routines in the driver is called due to the open of the port from the daemon to the driver. The routine uses the sychronization mutex which seems not to be initialized which results in a system panic.
Has the flow of driver initialization vs application start via the init process changed in Solaris 10 vs earlier version of Solaris?

make sure all the settings are same as the working version and once undeploy the process then shut dowm the server and then startup -->then deploy the process and again shut down and start it.this should be the trick

Similar Messages

Problem with Web Clipping and External Application

When I use Web clipping with INLINE rendering on usual sites I can move under links, not leaving a portal.
But if I try to make it via the self-made provider with External Application then links do not work.
I press them and it appear in the same place!
Authorization via External Application passes successfully, that is the page is displayed correctly.
But links do not work.
In what there can be a problem?
Oracle Application Server 10g Release 2 (10.1.2)

In order to prevent some urls and internal websites from being cached use url bypassing. This way these urls will not be cached and the users can directly use them without being asked to log in.
To enable transparent error handling and dynamic authentication bypass, and to configure static bypass lists, use the bypass global configuration command. To disable the bypass feature, use the no form of the command.

Problems with camera roll and deleting applications

Hi,
I'm hoping someone can help me. On my iPhone 3G (with Orange) I am having a couple of issues which I have not been able to resolve.
Firstly, I have no problem taking pictures and them then appearing on my camera roll, but whenever my phone is turned off, these pictures then disappear. This has happened before and after updating my phone with the latest version.
Also, I am unable to delete applications. I have tried pressing and holding an app icon, waiting for it to shake and the "x" to appear and nothing happens. If I then release the icon, it just opens the app. This happens both with the built-in apps and ones I have downloaded.
Any ideas?

http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
I tried this yday, fixed the problem straight away!!

I have a problem with the sync and new applications.why???

when choose some new applications i couldnt download on my iphone.
it stop at de 3 step of sync
the new applications are bbc news, some roman games, le diplomatique news, and only a few more
why?
some are charged, i have to ask my money back.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set

I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set?

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

My MacBook not responding with all browsers and some applications!!!

Hi !!!
First sorry my english...
My apple not respond i i need force to quiet... (Safari, firefox, chrome, some applications like players)
I a few days my mac don't works like before i try to use chrome safari fireworks and is always the same in youtube or any website with flash content, and some applications too the same problem not respond, i was unistall and reinstall a lot o softwares i use clean app to remove the app complete and reinstall but don't works ... What i do? whatis this? My mac is all updated i use all lastest versions ... I don't understand why... Somebody can help me...
Thank you for all news...
bye!

Hi,
Click once on the hard drive icon. Then hold down the  key and tap i (  + i ).
Capacity XX
Available XX
Used XX
Post back with your values of XX.
Regards.
Ian.

Problem with logging in to apex application builder listener

I have problem with my settings and am posting this in hope that someone else out there had similar problem and solved it!
I am trying to use reverseproxy to access to our db through apex listener.
It's been all set-up and I can login to the application it self either through proxy or no proxy using the listener.
But when I try to login to apex application builder I cannot do it through proxy(with no proxy, it works).
It just refreshes the login page when I click login....
I tried to upgrade the listener to the latest v1.1(using 1.0.2) but it causes my tomcat to crash...
So solution i am looking for is how to make logging in work through proxy..
In the firebug it is showing that below and few other request status as 302 moved temporariry
http://myserver:8080/testsin/apex/wwv_flow.accept
Where as with no proxy it is saying Found.....
Any thoughts??
Thanks
Sin K

Hello Sin K,
so proxy and Tomcat are located on different machines as well? Is the proxy able to commuicate with the Tomcat on the configured internal ports and is the proxy able to lookup the hostname you configured for the Tomcat?
For the connector, the proxyName and proxyPort should be the parameters the client uses to call APEX. So if your clients should call via http://proxyserver:8080/testsin/apex the settings would be
proxyName=proxyserver
proxyPort=8080Reason for this is that applications (e.g. the APEX Listener) generate there URL references with these parameters.
But does your proxy actually serve on port 8080? And is that port accessible by clients? Do clients accept cookies from that server?
In my case, there is only one 302 which redirects to http://host:port/apex/f?p=4500:1000:sessionid which is correct.
If you look into your first post request in firebug, what's in the request header?
-Udo

Problem with java, ASCII and Linux

Hi Friends,
I has a Linux RedHat 9.0 with a jre1.5.0_04 (rpm package of Sun).
I has a problem with ASCII , for example :
import java.io.*;
public class HolaMundo
public static void main (String[] args)
System.out.println("Hol� M�ndo");
this programs runs ok on my windows jdk so it prints "Hol� M�ndo", but when i run the same HolaMundo.class program on my linux redhat it prints "Hol�� M��ndo"
I think the problem is with the ASCII table that uses the linux version of jre, but i dont know how to solve this problem. I need a Spanish-European ASCII table on my application but i think it is working with a US-ASCII table.
Then i has installed a kaffe 1.0 (rpm) java machie on this linux and this solve the problem but i has another problems of compatibility with this old version of java kaffe.
Do you know whats happening?
Thanks in advance.

The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Problem with pdf display downloaded from application server

Hi all,
I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
Regards,
Sasi
Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

used a program to read the file from appl server and then downloading it to desktop.

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Planning problems with russian language during refresh application

Hello all ))
I have problems with Planning during refresh my Application with Essbase.
I intsalled Essbase on RHEL4 and set ESSLANG=Russian_Russia.ISO-8859-5@Default also I set locale on ru_RU.iso88595
Ater that I installed Planning on Solaris 9 which uses Oracle RDBMS with NLS_CHARACTERSET=AL32UTF8 and set locale on server to ru_RU.iso88595
Now I can create dementions, members on russion language in Essbase without problems also I can create dementions,members,etc on russian language in Planning. But if I create demention or member in Planning on Russian languge and ) try refresh my Application with Essbase I give follow error
"=====(HspCubeCreation.java)sQueryString:?Application=Test1
com.hyperion.planning.olap.EssbaseException: (1060010)
at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
at com.hyperion.planning.olap.HspCubeRefreshTask.addChildren(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
Why it's happened?
Please anybody help me

since march 5 we are on planning 9.3.1.1 and also having problems with refreshing:
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.HspJSImpl.lockApp(I)V(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.lockApp()V(Unknown Source)
     at HspSecurityFilter.Handle(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at HspSecurityFilter.doPost(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.olap.HspCubeRefreshTask.run()V(Unknown Source)
     at java.lang.Thread.run()V(Unknown Source)
anyone a idea?

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

Problems with updating muse and illustrator

Everytime I try and update muse it says the installer is damaged - have tried everything, restarts, waiting a few days etc.
Then wne I tried updating illustrator I got this:
Adobe Illustrator CS6 Update (version 16.2.1)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204

seems to be working with illustrator however still have a problem with muse..
says
the application coudl not be installed because the installer file is damaged. Try obtaining a new installer file from the application author

Problem with driver initialization and associated application

Similar Messages

Maybe you are looking for