Problem with Dual LED - N79

I have Nokia N79 for the past 10 months and today I realized that its dual LED flash is not working. It was fine till atleast last week. I tried a hard reset but its still not working. Please help me out with this problem

Hi ashwani26596,
Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • Does anyone have problems with the led light ?

    Does anyone have problems with the led light ?

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • P45 Platinum - Problem with Dual Channel

    Hi,
    As Topic says I have a problem with my new board, it gets stuck at checking memory (that is what the status-led shows) it's a rev 1.1 and had it replaced once before for the same problem, so I think it's a Software-problem..... I have 2x2GB "Crucial Ballistix Union Jack CL4"-kit it works fine in single channel (DIMM 1&2) but not in dual channel (DIMM 1&3) so if someone knows PLEASE help me with the problem...
    Sorry for my English , English is my 3rd language
    Anyway Thanking everyone that replies with an answer that is OnT....
    EDIT: Bios is V1.0 forgot to write it in the post...
    CPU Intel E4600
    RAM Crucial BallistiX CL4 Union Jack 2x2GB
    VGA Gigabyte GeForce 9600GT 512MB Heatpipe
    HDD Samsung F1 320GB 16MB  SATA300
    PSU FSP 450W

    Quote from: Alex.Ethuba on 06-August-09, 02:27:46
    Question:
    The first time you took the board in did they replace it on the spot or did you have to wait for a few days?
    If I may ask where did you purchase the board?
    they tested it, bought it online so it took some days for the package to go and return. They also tested the board.
    Quote from: Alex.Ethuba on 06-August-09, 02:27:46
    When did you buy the board?
    Bought it last month, and the board is new I think because I forgot to return the bracket(got one in the replacement) and the box isn't teared like the one I turned in ...

  • Problem with dual screen (24" imac 2006 ver)

    hi
    i've got a 24" intel imac (2006 ver) and i've connected it using apple's mini-dvi => vga adapter to my 2nd 22" lcd monitor, a samsung 2232GW, which is set to 1680 x 1050.
    however, the samsung lcd displays (when i'm using as dual screen) is quite blur and double imaged. quality is readable but very irritating. i'm also using the same monitor for my ps3 (uses the DVI side) and have no problem with any visual aspect. I've tried playing around with the settings like resolution and calibration and tuning but didn't help at all.
    anyone might have any ideas and enlighten me on this issue?
    thanks
    Message was edited by: Treon

    Did you get any resolution to your question? I have the Samsung monitor almost like yours, and I posted two seconds ago. I think I have a similar problem. I had been using my Samsung with my PC, and just switched to Mac. I loved my Samsung, but now ,for the first time using as a second. Hooked up to mini dvi to dvi, and reported a glow, or tinge coming around any window that I may place on the Samsung.Also, when Ilook at the background around the window I can see that the resolution is not perfect and is breaking up a little. Did you try VGA? and did it help? Curious to know

  • Player compatibility problem with dual layer media

    I've created a dual layer DVD and there is a problem with compatibility from player to player.
    It plays fine in one of my DVD players but will not load in the other.
    The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
    It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
    The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
    I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.

    Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
    Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
    -Jake

  • Problem with dual graphic

    I own HP PAVILION G6 1202TX model.It is built with dual graphics INTEL and RADEON. INTEL - INTEL(R) HD Graphics 3000 and
    AMD- RADEON(TM) HD 6470M.earlier accidently i lost my windows and its all drivers but my main issue is with ts graphics.If i install AMD drivers a notification bar shows problem with INTEL graphics and if i install INSTALL it shows issue with RADEON.After installing the driver every time i  restart my pc AMD shows a dialogue box and if i have installed AMD ,INTEL keeps poping up notification bar in right lower corner of pc it something related to INTEL SYSTEM TRAY GRAPHICS.
       Now i have installed INTEL graphics driver i and every time ii restart my pc it shows a dialogue box 
    this dialogue box appers every time i start my pc
    PLEASE HELP ME
    Hope for a freequent action
    THNK YOU.
    This question was solved.
    View Solution.

    Hi ashwani26596,
    Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Problems with Dual 2.0 G5

    Hi,
    I'm having a couple problems with my Dual 2.0 Power Mac G5 (early 2005) and wondering how I can fix them and if they might be related.
    Problem 1:
    My 20" Apple Cinema Display keeps going black. I'll come back to my computer after it has been on, thinking the display has gone to sleep. But when I move the mouse, nothing happens. The computer is set to never sleep, only the display. So then I shut the computer down by holding the power button for 5 seconds, and try to turn it back on after a minute. I can hear it starting up, but again, the screen stays black.
    This has happened a few times over the past 6 months, but turning it off and on a couple times would eventually get the display to work again. This time, however, I'm having no such luck. Is my graphics card dying?
    Problem 2:
    Again this has happened a few times over the past 6 months, but now it has happened twice in a row. After not using the computer for a while, I will notice the fans starting to run really loudly. At first, I just thought it got hot and the computer was trying to cool down. But they would run really loudly for a pretty long time, so I would check the computer to find it has locked up.
    So now I can't get my computer to turn on and function properly. I'm not sure what to do or if these two problems are related. A couple days ago I installed a new SATA hard drive in the second hard drive bay. The installation went fine and I have already transferred some files over to the new drive, but I've got to wonder if the drive might have something to do with it. The problems have occurred before I installed the drive, but now they are occurring more frequently.
    Any help is greatly appreciated.
    Thanks,
    David

    I've got a dual 1.8 I bought in Dec. 2005. It's always been a might twitchy, but lately I get Kernel Panics regularly. Sometimes the HD is damaged and I have to run Disk Warrior to get it back.
    I have had some serious issues with the HD in this machine. I might zero it out and start over.... or just buy a new one.
    Can anyone tell me what the panic log means? I'll add memory... sero out or replace the drive... whatever it takes. I just want to find a clear path to freedom. Any help would be appreciated.
    Description: Panic (system crashes) log
    Size: 6.14 KB
    Last Modified: 4/9/07 7:25 PM
    Location: /Library/Logs/panic.log
    Recent Contents: ...
    Proceeding back via exception chain:
    Exception state (sv=0x505F1280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x4F81E000)
    PC=0x9003C0EC; MSR=0x0000F030; DAR=0xE0006000; DSISR=0x42000000; LR=0x00002FEC; R1=0xBFFFFD80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x505F1280)
    PC=0x000A4BEC; MSR=0x00001030; DAR=0x0000FF1C; DSISR=0x0A000000; LR=0x0002D120; R1=0x3717BB70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0023A820 0x000A4498 0x000E5654 0x000E46DC 0x00231ED4 0x000F9360
    0x000EC65C 0x000E8E20 0x000EC6A8 0x002AB7F8 0x000ABB30 0xFFFFFFFF
    backtrace terminated - frame not mapped or invalid: 0xBFFFFD80
    Exception state (sv=0x4F81E000)
    PC=0x9003C0EC; MSR=0x0000F030; DAR=0xE0006000; DSISR=0x42000000; LR=0x00002FEC; R1=0xBFFFFD80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC

  • Booting/Crashing Problems with Dual Core 2.3GHz PowerMac

    I'm wondering if anybody else is having this problem. ...
    I'm having problems booting my new Mac... for the first few weeks everything was fine ... but for the last few of days it often takes 2 or 3 tries to boot to the desktop (it hangs during the boot process) and sometimes when it get there it freezes when I try to launch an app. Rebooting yet again usually solves the problem...
    Yesterday after i got it booted it sounded like my disk drive was working for a long time after it was booting the computer was very slow and when i checked CPU usage was very high bit i was not running anything to cause that!
    This evening I had to reboot 5 times before I was able to do anything .. and one time the fans kicked into high gear and sounded like a vacuum cleaner!
    Once I got it going I opened Mail and checked my new eMails, opened Safari then left the computer for about a half hour and when I got back I had message on my screen saying I had to reboot!
    When I got my Mac I immediately ran the full hardware test and it passed... Then I immediately added 2 GB of Crucial RAM and ran the full hardware and memory test yet gain and everything passed...
    So it should NOT be a RAM issue.
    Has anybody else seen this type of thing and/or has any suggestions on how to fix it or isolate the problem?
    Thanks
    - karen

    Feldspar-
    As I'm waiting for for my replacement Dual Core 2.3 G5 to arrive back from Apple, I've been scanning this site to see if there has been any conclusive determination about the underlying problems with the new G5s. So far, I'm sorry to report, I don't see any.
    My recomendation to you is to talk directly to apple tech support If you aren't already. Although they may not have a definate solution at this point, you may be able to get a new machine, with more assurrances of it being healthy, than getting your current machine repaired at a service center. You have only 30 days from your purchase date to determine this, and in my case it took a few days working with them to get to the point where all of their tests and trials were done and my machine was classified DOA.
    We have paid too much money for a machine that is only as reliable as the amount of time we're willing to spend to get it running after a few (or more)boots. One of the main reasons I've chosen Apple for all these years is that I didn't want to have to learn all of the underlying engineering and programming that make it work. I have always been willing to pay more money for a system that works when you turn it on the first time. I am confident that Apple wants very much to maintain their image of reliablility since much of their competitive edge is the advantage of great looking Apple hardware running their feature packed native software.
    I am hoping that we haven't entered a new era with Apple products where my new best friend is going to be the tech guy at the local apple repair center: (not to knock any of them..by the way.)
    Although I don't make my living on my cumputer as you do, I depend on my computer throughout my day for information, important financial transactions and comunication. It goes beyond inconvenient to have to send my machine back, for whatever reason. I am writing this on a rock solid G4 933 that has never had a single problem. Have I just been lucky?

  • Problems With Dual Layers Break Points

    I have 3 G5 Macs all without intell chip sets. I have tried this with all 3 Macs so lets take the newest one of the 3. Its running on mac osx version 10.4.11 Processer and is 4x2.5 ghz power pc g5 with hl-dt-st dvd-rw gwa-416sb. I can burn single DVD'S all day long, but the problem starts with dual layers. I am using verbatim DVD+R DL. I have one movie which is 2 hours and 36 minutes it burns fine when I burn a single layer, however when I try to build and format a dual layer I get that message window: formatting failed (its says formatting was not successful, the image exceeds the max allowed size for a dual layer configuration.) That is on automatic breakpoint. I have tried inputting in my own break point no matter where I put it the same message window appears. I am using DVD SP 4.1.2 also on FCP 5.1.4. I also tried buring dual layers on Sony DRX A10 UL-T all was working fine last year. I cant figure out why this has changed. Any suggestions will be helpful and appreciated. Sincerely Bob.

    Welcome to the boards
    Since you are using a Dual Layer Disc, there has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size.
    What you do is
    1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be
    2.) Build the project (but not format)
    3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.
    If the message is not for a layer issue as above (meaning one of the two layers exceeds the permissable size) then it can be an encoding rate issue. 2 Hours and 36 Minutes on a DL should be about 6.9 Average with AC3 audio @ 192. Even then it may be too close depending on menus and the rest. If using uncompressed audio or higher settings for video, could be the problem.
    http://dvdstepbystep.com/faqs_7.php

  • Problem with dual currency when working with AMEX and VISA

    Hi all,
    We are in process of implementing SAP travel on demand with integration of AMEX and VISA corporate cards. Paymentric was in charge of our configuration and the information is comming to our system now.
    As per our set up, the statements are being procesed with errors, due the currency we are receiving the charges is USD instead of country home currency. Example -> Argentinian employee travel to Brazil, and paid with BRL currency. We are receiving the statements in USD instead of BRL (There is a validation in the tool which cannot process statements in other than local currency)
    I spoke with AMEX and VISA representatives, and both says that they work with dual currency model, so changing the currency in the statements is not a possibility.
    Are we missing something in the config? I was reading information and discover that other countries like China are having same issue.
    Thanks for your help,
    Hernán

    Hi Hernán,
    credit card statements usually contain two currencies:
    1.   1. Local Currency: if the Argentinian employee travels to Brazil and buys something there, the local currency would be BRL
    2.   2. Billed Currency: this is the currency in which the credit card is billed (according to the credit card setup). Each transaction is converted to the billed currency in case of foreign transactions.
    Cloud for Travel and Expenses knows for each employee exactly one home currency. An expense report is always processed with home currency.
    Up to release 1502 it is not possible to import credit card transactions if the credit card billed currency does no match the employee’s home currency (there is no restriction to the local currency).
    As of release 1505 this is possible, but it has to be activated in Business Configuration:
    Travel and Expenses -> Expense Reimbursement -> Expense Input Channels -> Group: Credit Card -> Do you want to import credit card transactions with a credit card currency that differs from the home currency of the employee?
    In addition, you must use the new posting interface "SAP ERP Financials Using IDoc (with extensibility)". If you detect settlement deviations or differences on the reconciliation or credit card account (split payment) due to the currency exchange rates in your financial system, you can correct this situation by implementing BAdIs in the ERP system.
    Hope this helps.
    Best regards,
    Ralph

  • Screen Sharing problem with dual monitors in 10.6

    When I'm using Screen Sharing from my Macbook to my iMac with dual displays (10.6.1 on both machines) It works fine when I initially connect, but when I switch to Display 1, it shows me Display 1, but though my cursor moves, I can't click on anything. It won't let me go back to viewing both displays either, and changing from Adaptive to Full Quality or vice-versa makes no difference, as does Scaling. This happens whether I'm on my local network or using Back-to-my-Mac. It was working fine under Leopard, but has been exhibiting this behavior since the 10.6 upgrade.
    Mark

    This is a very irritating bug. One thing that has worked for me a couple of times (I think a couple of times it also didn't work) is to turn on mirroring. Screen sharing then only shows one monitor, since they are both the same. I'm not sure if the monitors have to have the same resolution for this to work, mine do. The nice thing about this is that before quitting the screen sharing app you can just turn mirroring off again and it will go back to normal. It's easiest to do this by enabling the 'show displays in menu bar' in your displays preferences.

  • Problem with dual grafic

    i've palivilion 14 n037tx dual grafic intel and Amd radeon
    but when I install driver for Amd Radeon witn HD 8670m always have trouble.
    Amd radeon undetected when I install game
    on grafic Aplication like Photoshop CS6 or CorelDraw X5 event I have changed to maximum in Catalyst Control Center
    sometimes when program running can be frezz or not responding.
    any solution with my problem ??
    thanks..

    Hi @juniawan
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after updating the driver for the AMD 8670m you have had issues.
    When I checked the specifications for your P Pavilion 14-n037tx Notebook, I noticed  it came with Ubuntu.
    Did you install the graphic drivers from the HP website or from AMD.
    If you installed from AMD, please try the drivers on the HP website.   HP Pavilion 14-n037tx Notebook PC
    If the issue remains please contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Problem with Dual Diplays

    I have bougth i LG flatron L1720B and connected it to my MSI MEGAPC 180 I have a iiyama visionmaster PRO 451 connected from the start but the problem is that only the monitor on the primary monitor output is working och the secondary the monitors says signal out of range.  At the start of the computer both monitor have picture but as soon as I come inte to windows the monitor on the secondaty output goes blank or says signal out of rage. Any one else that have this problem and knows how so solcve it ?

    if u have installed the nvidia display driver, u should be able to adjust dual monitor setting by going to the display properties, setting tab, click on monitor 2 and check 'extend windows/display onto this monitor' or things like that. i dont think u need to install the display drivers that came with the monitors, since windows xp will install the default drivers and the nvidia display drivers will handle the monitors through the display properties.
    hope this is useful, cuz this is the only way i know. if still cant, u should ask again for help.
    cheers  

  • New arch installation, problems with dual monitors

    tldr: nvidia setting are not saving when when I leave a session.
    yesterday I wiped my computer and went from ubuntu to arch on my desktop (been using arch on laptop for a while). I'm having problems getting my dual monitor settings to save. I configure the settings via nvidia server settings and it works fine but when I go to reboot or log out it goes back down to just one screen and I have reset up nvidia.
    gdm has never seen both monitors its always just the single screen.
    software
    nvidia drivers 280.13
    xfce4 v4.8.0
    gdm 3.0.4-2
    kernal 3.0-arch
    my system is up to date with a yaourt -Syu
    Sorry if this has been answered but my googlefoo was not strong today.

    GDM *should* use a xorg.conf if it exists.... I also noticed that Arch keeps a xorg.conf.d folder, which I'm not sure the nvidia-settings app knows how to handle.
    Also, make sure you are running the nvidia-settings app with root privileges, as you'll need those to write a xorg.conf in /etc/X11.

  • Big Problems with Dual Monitors

    I am running a Mac Pro with the Nvidia graphics card. I did boot camp to intall windows, but later decided to remove the partition adn install parallels. The problem is thaton the mac side when I place a monitor on the second port, all my screens do is flash blue and never show up. I tired reinstalling the os, and this didn't fix it. I have 2 20 in apple cinima screens, but I can't use them both becasue when I plug the second one in both of my screens go away (flashing blue on and off). How can I fix this? it is real problem.

    Have you also tried setting up dual display using the windows settings instead of the NV control panel?
    Also (and this one is obvious, but worth checking)...if your HDMI display has multiple inputs (DVI, VGA, HDMI, etc.), make sure you have it set to the correct input.
    I'm guessing the issue is with the HDMI display.  Is there any way you can try a DP monitor instead of the HDMI monitor?  That could help narrow the problem even further.  Nvidia is very particular about the cable adapters/dongles that they claim support for with their cards.  The one we sell is officially supported (made by Bizlink).

Maybe you are looking for

  • What's the meaning of Forward No Coverage at Call Forward and Call Pickup Settings

    hi All, Please, I have a CUCM and I need to understand the meaning of the follow configuratio at the line: Forward No Coverage Internal   Forward No Coverage External    Forward on CTI Failure    Could you explain to me by a easy way????? How can I d

  • URLLoader question

    Hi All, I'm struggling with the usage of an URLLoader. The problem is that basically, I need to load SWF's, but if an error occurs (for example, the swf does not exist or the user is not logged in), I want to send a text (JSON) message back to the fl

  • Installing Crystal reports server 2008 v1 with iis

    Hi All I have downloaded a trial version of Crystal reports server 2008 v1 to install on our server. We are runnning server 2003 and have iis version 6.0 installed. I have run the installation wizard on our test server but when i get to the "Select W

  • Doubt concerning licence  - generating web galleries with Bridge CS4

    Hi, I would like to know if I could generate web galleries with Bridge CS4 and place them in web pages which I intend to sell? There is a possibility to generate web galleries in Bridge CS4. Can I place any of them to a web page which I want to sell?

  • TR-TM: error in Contract settlement

    Hi, When I settle contract there is a error message: Im BAFin-Meldewesen sind Stock,Sparte,Anlageart und DV zu pflegen. Message no. ISSR_MD_ADMIN038 Please help me how to fix it. Thanks and Best regards Ms.Minh