Problem with email clients- BT support clueless

Hi.  I've been having a bizarre problem since migrating to the new BT mail.  About 2 weeks after the migration, all of 3 of my email clients (thunderbird on a Mac decktop, outlook on a PC laptop, iPhone) started reporting the "server does not recognsise username/password" error.  I followed through the online BT mail help instructions to make sure all of the email account settings were correct, which didn't help.  I can access BT webmail directly with my username/password and via that changed my password, then updated it on my email clients.  Initial joy! It worked and my clients could access my email accounts again.  24 hours later- same problem with all of my clients- server does not recognise username/password.  The only way I can get them to work again is to repeat the process of changing my password via webmail, then updating the password on my email clients.  This allows access for about a day, after which I get the same username/password error.
Eventually after about a month of this I decided to phone BT support.  What a painful process.  The guy on the other end of the line did his best, but unfortunately his English wasn't great.  It took about 50 minutes of circular conversations for me to explain the problem.  Eventually his anwer was that because the webmail was working properly, the problem must be with the email clients, which he couldn't help with.  He advised me to take my laptop/iPhone/ to a local engineer to figure out what the problem must be. By this time I was really frustrated and asked to speak with the supervisor.  He agreed that a) because the problem was with all three clients, and b) because changing the password on webmail and updating them then allowed them to work, albeit temporarily, that it was highly unlikely that the problem was with the client setup.  However, he said that he wasn't able to help any further as my webmail is working properly!
Can anyone help.  Has anyone else had this problem?  Any ideas? How do I get BT to fix this and who do I complain to if they can't?
BT- outsourcing support abroad seems like a good idea.  It isn't worth the loss of goodwill.  Bring it back.

EvanR wrote:
Thanks for the advice, but I'm afraid this makes no difference at all to the problem. 
After posting, the problem sorted itself out for a few weeks, it's back again today.  Reading all of the other posts about the disaster which is the new bt mail system, I've decided just to leave it for a few days.  It's obviously something at BT's side (although the support try to deny it).  By the way, the support is totally useless.  Promises to call back not kept, technically clueless etc. 
If this keeps up I'm just going to go to gmail or some other email provider.
To clarify the situation can you please do the following concentrating on your PC Laptop.
1. Wait until you get the failure on Outlook.
2. Switch off (ie power down) your Mac desktop and Iphone.
3. Try Outlook again.
4. If the problem still occurs then login to webmail and logout WITHOUT changing your password.
5. Try Outlook again.
6.  After 5. you can power up your Mac and Iphone
Please report back confirming you have done 2. and the results of step 3 and 5 including any failure messages reported exactly with any personal information xxxx out and not deleted.
Are you using POP or IMAP in your clients ?

Similar Messages

  • Problem with Variable Client Support

    Hello,
    I work with Labview 8.5 and Crio 9014.
    I have a problem with  Variable Client Support. When I try to compile my project I have the following error:
    "The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
    I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
    Can somebody help me?
    Thanks

    I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI... 
    The Network Variable Engine and Variable Client Support must be installed on the RT target
    for this application to function properly. If the Network Variable Engine is not supported on
    the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
    to My Computer in the project. Doing this will deploy the variables to localhost but
    will still require that Variable Client Support be installed on the RT target.
    Could someone help please ? 
    Attachments:
    ni.png ‏95 KB

  • Problem with Instant Client 10.2 with ODBC and Studio 6.0

    Has anyone else had the issue of not being able to make a second connection after the first connection has been closed and the free HENV is called via the object distructor? What actually fails is the second time thru the SQLDriverConnect call returns -1. If the connection object is a global but close is still called it will work. So this leads me to believe the problem might be from the SQLFreeEnv call in the distructor.
    If I run test using the 10.1 Instant cleint it works fine. I have included some code that I use to test with below.
    I am using:
    XP Pro sp2
    Visual Studio 6.0 sp6
    Instant Client 10.2
    MDAC 3.51
    Oracle Server 10g
    Thank you for anyone suggesting advice, help, direction....
    #include "stdafx.h"
    #include <afxdb.h>          
    #include "DriverTest.h"
    #include <odbcss.h>
    #ifdef _DEBUG
    #define new DEBUG_NEW
    #undef THIS_FILE
    static char THIS_FILE[] = __FILE__;
    #endif
    static char CONN_STRING[] = "DSN=TMTest2;UID=TMMain;PWD=TMMain1;";
    CWinApp theApp;
    using namespace std;
    CDatabase cdGlobalTMMainDB;
    BOOL TestOnStack();
    BOOL TestGlobal();
    int _tmain(int argc, TCHAR* argv[], TCHAR* envp[])
         int nRetCode = 0;
         // initialize MFC and print and error on failure
         if (!AfxWinInit(::GetModuleHandle(NULL), NULL, ::GetCommandLine(), 0))
              // TODO: change error code to suit your needs
              cerr << _T("Fatal Error: MFC initialization failed") << endl;
              nRetCode = 1;
         else
              // TODO: code your application's behavior here.
              cout << "---------------------- Testing connection as global ------------------------" << endl;
              TestGlobal();
              TestGlobal();
              cout << endl << "---------------------- Testing connection on stack -------------------------" << endl;
              TestOnStack();
              TestOnStack();
              cout << endl << "---------------------- Testing connection as global(again) -----------------" << endl;
              TestGlobal();
              TestGlobal();
         return nRetCode;
    BOOL TestOnStack()
         CString sMessage;
         BOOL bOkay = false;
         try
              CDatabase cdStackTMMainDB;
              // try open connection
              cout << "Attempt open on stack... " ;
         bOkay = cdStackTMMainDB.OpenEx( CONN_STRING, CDatabase::noOdbcDialog );
              // close connection
              cdStackTMMainDB.Close();
              cout << "Successful" << endl;
         catch( CDBException *pX )
              CString cszTheStr;
              printf("FAILED - CDBException has occurred %s\n", pX->m_strError );
              pX->Delete();
         catch( CMemoryException *pX )
              printf("FAILED - CMemoryException has occurred\n" );
              pX->Delete();
         catch( ... )
              printf("FAILED - Other exception has occurred.\n" );
         // return results
         return( bOkay );
    BOOL TestGlobal()
         CString sMessage;
         BOOL bOkay = false;
         try
              // try open connection
              cout << "Attempt open as global... " ;
         bOkay = cdGlobalTMMainDB.OpenEx( CONN_STRING, CDatabase::noOdbcDialog );
              // close connection
              cdGlobalTMMainDB.Close();
              cout << "Successful" << endl;
         catch( CDBException *pX )
              CString cszTheStr;
              printf("FAILED - CDBException has occurred %s\n", pX->m_strError );
              pX->Delete();
         catch( CMemoryException *pX )
              printf("FAILED - CMemoryException has occurred\n" );
              pX->Delete();
         catch( ... )
              printf("FAILED - Other exception has occurred.\n" );
         // return results
         return( bOkay );
    }

    For what it is worth, I am having a similar problem with an application I support. When I upgraded from 10.2.0.2 to 10.2.0.3 to fix a performance problem, we now have this connection problem. If I can not get a good solution for the InstantClient I will have to start using the Full 10.2.0.3 Client and I am not looking forward to deploying that.
    Steve Hicklin
    USA

  • Problems with email, Macbook Pro, Yosemite

    Keep getting knocked out of email. Different errors, mostly cannot connect to server. Per Apple's mail support page. One of the settings should be Password. When I change to password in settings, it keeps switching to MD5 Challenge -Response. Could this be causing my problems with email?
    I have a macbook pro & am using the latest Yosemite. But have been having these problems before installing Yosemite. No email problems on an iPad.
    Thanks for your help.

    UPDATE for anyone who's interested.
    I called Apple support. The woman was very helpful and, so far, seems to have corrected my issues. She removed & reinstalled my email accounts. The problem was that the accounts were set up as POP accounts when they should have been IMAP accounts. The authentication is now set to Password and all mail settings are as shown in the Apple's Mail Settings Lookup page. 

  • Several problems with email

    I've been having several problems with email.  
    1. I sent email on Dec 10 and the people didn't receive them until Dec 16.
    2. I often get two, three or even four copies of the same email in my Thunderbird client.
    3. My Moto X (2nd gen) phone sometimes says it can't connect to email. 
    What's the problem?

    Thanks for reaching out to us JoAnn108. We'll do everything possible to address this for you.
    Could you tell me how long this has been an issue? I noticed you mentnioned Thunderbird; do you experience the same problems when working with your emails directly from the Verizon webmail portal? Also, are there any error messages you notice when the issue occurs? If we can get some answers to these questions it'll help determine our troubleshooting path.
    Thanks,
    ^FCN

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

    Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

    It was because the problem was major.  If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel.  The common way to solve that is to rebuild servers and put back into service.  That takes time.
    Apple did not want to admit this problem.  My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed.  To reveal this would be to cast into doubt their future revenue.
    Either way.  Run do not walk away from Icloud products and services.  Apple has demonstrated they can not be a business partner.

  • I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

    I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
    The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

    For IMAP mail only.
    Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

  • Problems with email account on ipad2 when changing from mobileme to icloud

    Problems with email account on ipad2 when changing from mobileme to icloud

    Would you please give us some more information about your problems.

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • Problems with QuickVPN client

    Hello,
    I experiance problems with QuickVPN client (version 1.4.1.2). I'm trying to connect to router SA520 with 1.1.65 firmware,
    vpn tunell is established, but client says "The remote gateway is not responding. Do you want to wait?"
    in case i click no, it drops vpn tunell
    QuickVPN client log looks like this:
    2010/08/18 12:13:27 [STATUS]OS Version: Windows 7
    2010/08/18 12:13:27 [STATUS]Windows Firewall Domain Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]One network interface detected with IP address 192.168.1.100
    2010/08/18 12:13:27 [STATUS]Connecting...
    2010/08/18 12:13:27 [DEBUG]Input VPN Server Address = vpn.in-volv.lv
    2010/08/18 12:13:28 [STATUS]Connecting to remote gateway with IP address: 78.28.223.10
    2010/08/18 12:13:28 [WARNING]Server's certificate doesn't exist on your local computer.
    2010/08/18 12:13:30 [STATUS]Remote gateway was reached by https ...
    2010/08/18 12:13:30 [STATUS]Provisioning...
    2010/08/18 12:13:39 [STATUS]Success to connect.
    2010/08/18 12:13:39 [STATUS]Tunnel is configured. Ping test is about to start.
    2010/08/18 12:13:39 [STATUS]Verifying Network...
    2010/08/18 12:13:44 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:47 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:50 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:53 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:56 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:14:08 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/08/18 12:14:12 [STATUS]Disconnecting...
    2010/08/18 12:14:15 [STATUS]Success to disconnect.
    Server logs look like this:
    2010-08-18 12:28:49: INFO:  Adding IPSec configuration with identifier "arvils"
    2010-08-18 12:29:02: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:29:02: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:29:02: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:29:02: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:29:02: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:29:02: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:29:02: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  NAT detected: PEER
    2010-08-18 12:29:02: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:29:02: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:e2cd855a75fc0887:6dc3b2e025152444
    2010-08-18 12:29:02: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 12:29:02: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:29:02: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:29:02: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=47693803(0x2d7bfeb)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=1079189482(0x40531fea)
    2010-08-18 12:35:57: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:35:57: INFO:  Purged IPsec-SA with proto_id=ESP and spi=1079189482(0x40531fea).
    2010-08-18 12:40:46: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:40:46: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:40:46: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:40:46: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:40:46: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:40:46: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:40:46: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  NAT detected: PEER
    2010-08-18 12:40:46: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:40:46: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:28447d39874689f9:a2b7da19d8d86413
    2010-08-18 12:40:46: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:40:46: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:40:46: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=259246202(0xf73c87a)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=3642234214(0xd9181566)
    2010-08-18 12:43:27: INFO:  IPsec-SA expired: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=33356156(0x1fcf97c)
    2010-08-18 12:45:47: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:45:47: INFO:  Purged IPsec-SA with proto_id=ESP and spi=3642234214(0xd9181566).
    The most interesting thing is that sometimes this message appears, sometimes not (with the same configuration).
    Please help!

    Hi,
    I have some problem. I am using Windows 7 Entreprice x64. I use SA520 Firmware 1.1.65 and QuickVPN 1.4.1.2 port 60443.
    "The remote gateway is not responding. Do you want to wait"
    2010-08-18 17:25:51: INFO:  Adding IPSec configuration with identifier "username"
    2010-08-18 17:25:51: INFO:  Adding IKE configuration with identifer "username"
    2010-08-18 17:26:04: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:04: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=>xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:04: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:04: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:04: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:04: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:04: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:ed4f291c71c1b688:7e6a8a0968f878fb
    2010-08-18 17:26:04: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:26:04: INFO:  Responding to new phase 2 negotiation: 172.22.5.10[0]<=> xxx.xxx.xxx.xxx[0]
    2010-08-18 17:26:04: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.170.224/32
    2010-08-18 17:26:04: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 48540->4500]: ESP/Tunnel xxx.xxx.xxx.xxx->172.22.5.10 with spi=239099274(0xe405d8a)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 4500->48540]: ESP/Tunnel 172.22.5.10-> xxx.xxx.xxx.xxx with spi=3886848189(0xe7ac98bd)
    2010-08-18 17:26:07: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:07: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:07: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:07: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:07: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:07: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:07: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:14: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=699f34b434d4318c:df4adca414787d36.
    2010-08-18 17:27:14: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:27:14: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:27:14: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:27:14: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:27:14: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  NAT detected: ME PEER
    2010-08-18 17:27:15: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:15: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:27:15: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    2010-08-18 17:27:15: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:28:20: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=3fe5eb0bddbf2b9a:f5c11d7f813ca74a.
    2010-08-18 17:28:21: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    With windows XP Pro i dont have this problem.
    Is there a detailed configuration guide?
    10x

  • Problem with Emailing the Internal table data as an excel attachment

    Hi Friends,
    I am facing problem with Emailing an internal table data as an excel file. I am using standard function module "SO_NEW_DOCUMENT_ATT_SEND_API1" which is using SOLI structure can have record with 255 character length. But my Internal table having each record means after concatenating all the fields it is going to be morethan 450 characters. so i t is not displaying all the data in excel file.
    Can somebody help me if there is any other function module or any other way that i need to follow.
    thanks for help
    venkat.

    You must use the the :
    CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB as a field seperator and
    CL_ABAP_CHAR_UTILITIES=>CR_LF as a record seperator.
    Check this example:
    http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
    Regards,
    Naimesh Patel

  • Problem with email being tagged as spam

    We recently changed our ISP, and up to this point we had no problems with emails to partners being tagged as spam. I've setup the send and receive connectors as the public FQDN, but we're seeing the following NDR:
    p01c12m113.mxlogic.net #554 Denied[CS] [50e56f35.0.4929.00-2377.9578.p01c12m113.mxlogic.net]
    (Mode: normal) ##
    I've emailed McAfee to see what the problem is, but I haven't heard back. When I do a query on their web site, the web interface doesn't indicate there is a problem with this mail server, but it's continued to reject messages today. Even though the send
    and receive connectors are set to mail.domain.com, but there still a portion of the header with the domain.local. I'm wondering if that might be causing a problem. Can anyone help me out here? Thank you.
    Return-path: <[email protected]>
    Envelope-to: [email protected]
    Delivery-date: Thu, 21 Aug 2014 16:16:30 -0500
    Received: from mail.domain.com ([68.106.69.243]:51586)
    by server.rcvdomain.com with esmtps (TLSv1:AES128-SHA:128)
    (Exim 4.82)
    (envelope-from <[email protected]>)
    id 1XKZiX-00065C-Kj
    for [email protected]; Thu, 21 Aug 2014 16:16:21 -0500
    Received: from server.domain.local ([fe80::69d5:9cfa:1b4e:dfa3]) by
     server.domain.local ([fe80::69d5:9cfa:1b4e:dfa3%10]) with mapi id
     14.01.0438.000; Thu, 21 Aug 2014 16:16:21 -0500
    From: User <[email protected]>
    To: "[email protected]" <[email protected]>
    Subject: Help
    Thread-Topic: Help
    Thread-Index: Ac+9hSb9q5a7FGZpQG2YPEX62Lunhw==
    Date: Thu, 21 Aug 2014 21:16:20 +0000
    <o:p></o:p>

    ok lets start one by one.. to rule out the problem with your Email system go to www.testexchangeconnectivity.com and perform the exchange tests like inbound/ outbound and other relevant tests and share the results. once this is confirmed then come to Mcafee
    Let me know which Exchange and which Mcafee versions you are using as i also have Mcafee and it needs some tuning. May be i can help you. but need to know the info and if you can paste a NDR which are tagged as SPAM
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Temporary problem with Email ?

    When I try and login to mail (BT Yahoo) from a notebook using IE10 I get the following message:
    Sorry
    We're experiencing a temporary problem with Email and are working to fix it as soon as possible. Please try again later. Sorry if this causes any inconvenience.
    Go back to BT.com >
    Back to log in
    I have got this message for the past couple of days.
    I can still see email on my android phone and iPad.
    Any ideas?

    Hi Everyone
    Please keep it friendly, we want people to feel comfortable about posting their questions and answers on the forums.
    I'm sorry to see you're having problems accessing your BT email. We've been able to login here so it looks like the problem has been resolved.
    Thanks
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for

  • Mapviewer error

    HI! I have imported the Mapviewer demo(mvdemo.dmp)in my schema, But I keep getting this error Message ORA-00942: table or view does not exist Message RME-02124: Failed to execute SQL statement: select o.object_name, o.object_type from user_objects o

  • I have created a webpage. The images load on EI and Chrome. But not on Firefox. Why is that?

    I have created a webpage ( luckysquidstudios.com) with basic HTML and none of the images load on Firefox. They load on Chrome and IE. Why is that.

  • Spreadsheet to array memory problems

    I'm trying to read a large .csv file (329 MB) and display a user selected column of data on a graph.  I have a standalone executable that does this wonderfully, however, I cannot contact the developer of this application to ask questions.  I just hav

  • Stop: C0000135 The program can't start because %hs is missing from your computer

    Im helping my aunt work on her computer. When you turn it on it says Stop: C0000135 The program can't start because %hs is missing from your computer on a blue screen. Its a Satallite C655-S5132. Please help. Thanks

  • Problems with the Scanner class and the decimal point

    I'm creating a GUI so to get the user input (double value) I use a jText field and the Scanner to read that value: private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {                                                 String time = jT