Problem with Epson Printer and Time Capsule

I have a new Time Capsule, already gone through first backup etc... I tried to connect my 2 month old Epson RX 680 to the TC via USB. I have tried everything and still cannot print wirelessly. I have uninstalled, reinstalled, rebooted both TC and printer, running out of ideas. Any suggestions why I can't print wirelessly?
BTW, works fine with USB from printer directly into macbook pro.

I attempted this routine with my Epson R380 and this did not help. I do have a working HO OfficeJet 6210xi working off Time Machine. I'm wondering if an expert with CUPS can help determine the problem from the logs?
I [07/Feb/2009:23:43:20 -0500] [Job ???] Request file type is application/postscript.
I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding start banner page "none".
I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding end banner page "none".
I [07/Feb/2009:23:43:20 -0500] [Job 12] File of type application/postscript queued by "mikenned".
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstoappleps (PID 22327)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 22328)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app/Contents/MacOS/ra stertoescp (PID 22329)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started backend /usr/libexec/cups/backend/mdns (PID 22331)
W [07/Feb/2009:23:43:21 -0500] [Job 12] recovered:
I [07/Feb/2009:23:43:32 -0500] [Job 12] Completed successfully.

Similar Messages

  • Problems with HP printer and PSE 11 (was bill v)

    When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

    I had already set it to borderless but it still prints a very small white 
    border. HP had no solution. I am ready to send the printer back to them.
    In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  Problems with HP printer and PSE 11 (was bill v)
    created by hyadav (http://forums.adobe.com/people/hyadav)  in Photoshop 
    Elements - View the full  discussion
    (http://forums.adobe.com/message/6010537#6010537)

  • Cisco router RVS4000 with Airport extrem and Time capsule.

    Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
    Airport extreme and Time capsule is conected via ETH.
    Any idea ?
    Thaks
    B.

    If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
    see http://support.apple.com/kb/HT4260

  • Scanning wirelessly with Epson printer and OS 10.6.4

    Cannot scan wirelessly with Epson NX515 and 10.6.4. Will print, but not scan. Will only scan with ethernet connection and using Image Capture app.
    Error message indicates No Connection. But there is a connection because I can print wirelessly.
    Thank you.

    Welcome to Apple Discussions Ella.
    Epson Support indicate that you must install Apple's Rosetta software - available from the installation disk for SL. In addition they indicate a communication problem which they are working on but I don't know how old this message is, ie how well they keep their website updated, nor do I know whether this affects wireless communication for scanning.
    Epson also indicate that some of their supplied software comes from other companies and you might need to download updates from those companies directly. This might apply to the scanning software or a component of it. They do give web links for this.
    I don't know how compatible this model is with wireless scanning but there is a note about making sure that the wireless settings allow the a/b settings as it's not able to operate through the n setting. I imagine that the settings are usually set for compatibility.
    You should use Software Update to ensure you have the latest Epson software.
    Note that scanning seems to put greater demands on the network than printing.
    Neville

  • Extending wifi with airport express and time capsule

    Hi All
    I'm new to macs and moving over in a big way!
    I started with a time capsule and all was fine apart from the coverage in the house.
    It seemed easy to extend the wifi so purchased an AE 802.11n and extended the network.
    It does extend and I can connect to the internet but the network is now really really slow and the time capsule backup wont work.
    connection is :
    Ethernet modem - Airport express ( as its close to my audio equipment ) - extended WIFI conection via 802.11n.
    Any suggestions? why is it so slow?
    Im at 7.3.1 firmware on both AE and time capsule and the Macbook pro is at 10.5.3.
    Any suggestions?

    I've managed to change the 5gHz of ther Airport Express that's extending the network.
    As mentioned, main AE is on channel 48, and I now have the 2nd AE on channel 36 - which means my TV can now see the network. Also tested speed via my mavbook air on the same 5gHz network as it all seems OK (A while ago I spotted my Time Capsule was on the same channel 48 as main AE and throughput was abysmal! Bad enough to make me reset the TC to factory defaults and setup again - which is when the TC got channel 120).
    Anyway, the fix... I changed the 2nd AE to create a wireless network (instead of extend), and manually set the channel to 36. I then set it back to extend, and it seems to have kept channel 36.

  • Conflicts with Airport Express and Time Capsule

    I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
    Time machine back up doesn't work properly.
    Is there anybody able to help me?
    Regards

    What broadband type do you have?
    It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
    If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
    You may need to wait until Sat.
    Get in a big supply of home videos or something and try and starve off your addiction.

  • Problem with Epson WF600 and Mavericks printing

    My Epson WF600 no longer is recognized wirelessly, by my Macbook Pro, when I go to Add Printers in my System Preferences. I installed the new Drivers for Epson (I think), but unless I connect the printer with a USB cable, my laptop wont print wirelessly from the Epson. Please help.

    Try resetting the router (power off 15 secs, then back on), then reset the printer same way.
    Also reset Printing System:
    OS X Mavericks: Reset the printing system
    How did you install new drivers?
    The new driver paradigm for OS X is: manufacturers give Apple the current drivers to keep on their servers. It gets installed automatically when we add the printer in Print & Scan prefs. You can force OS X to re-find both installed and available drivers by resetting the printing system.
    Find current version of drivers from this:
    OS X: Printer and scanner software available for download

  • Major printing problem with Epson R1800 and 1.5

    I have an Epson R1800 and Aperture 1.5
    Any page that I try to print borderless has a quarter inch border around 2 edges. I've tried to calibrate but the two borders are way outside what the calibrate option can deal with.
    This happens on all paper sizes. There is no option that I can find anywhere to fix this.
    Every other app prints just fine, including iPhoto. It seems limited to Aperture.
    Thanks, Bill

    Behold the power of asking a question.
    It fixed itself.
    I have no idea how or why. But after 3 hours of working, it fixed itself in less than 5 minutes.
    Thanks, Bill

  • PSE 9 printing problem with Epson printer

    hello there,
    I am using PSE 9  with Windows XP and Epson 3880 printer. I have re-installed all programs/drivers a couple of times. PSE9 Printer dialogue will not let me print choosing "Let Photoshop Manage Colour".  It will only let me print with "Let Printer Manage Colour".  I am using Epson papers.
    When I select "Let Photoshop Manage Colour", a box appears saying "ICC profile no longer available" and it won't let me print.  Is this a PSE 9 problem or an Epson problem?
    thanks !!!

    Well, I actually found the answer. I spoke to an Epson Rep!
    I used to have the Epson 2200 printer, then the Epson 3800, and now I use the 3880 printer on Windows XP and Windows 7 on my laptop.
    When you uninstall the other 2 printers, the color profiles are still in your program files and can become corrupted.
    This is why, in PSE 9, when I checked the box Let Photoshop Elements Manage Colour, it woildn`t print and instead there was the pop-up box ``ICC profile no longer available`` because it was trying to access the old paper profiles and not the ones that came with the 3880. I use Epson papers, by the way.
    The solution was to go into C-Drive, Program Files, System 32, spool,drivers, colour, and this opens to the ICC profiles used by the printer. Then I deleted the old paper profiles associated with my former printers.
    And it worked !!

  • Trouble with Airport Extreme and Time Capsule

    Just got a new 2TB time capsule and added it to my network (existing Airport Express and Airport Extreme).  All devices are hard-wire back-hauled to Linksys router.  Set up was straight forward with no issues and initiated a time capsule back up without a problem.  Within hours I noticed that the TC was no longer reachable in Finder.. Opening the AirPort utility, I saw that both the Extreme and the TC were "lost".  Still had (green) internet connectivity, but the base stations were showing as off-line in the Airport utility.
    Tried rebooting and checking from multiple other devices and no luck.  Occasionally will find them both on-line in Airport utility, but seem to lose one (usually TC) after a short period.  All are running the most up to date version of firmware (7.7.3).  Prior to installing the TC, I had experienced 0 issues with Airport Express and Extreme.
    Has anyone else seen similar issues?  Are there settings that need to be accounted for in some way to avoid these frustrating "lost devices"?
    thanks

    Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
    I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
    Do you understand anything ?

  • Strange Problem with Epson printer installation

    Dear all,
    perhaps someone can help us. We have a macbook pro here and want to connect an Epson printer via USB, an all-in-one modell: DX4250.
    For this type Epson provides drivers on their page (especially for intel-macs).
    http://esupport.epson-europe.com/SoftwareListing.aspx?lng=de-DE&data=61747C22D70 AB7D7FB76A662086D56545870680C257BA48E196FDFD8BD2D625F
    We went to the page downloaded the drivers, unzipped the files. We got files with the suffix *.dmg and put them on the macbook and installed them, by clicking on the files. After this we found out, that the scanner is running perfectly, but the printer is not there. We can neither configure the printer by selecting it from the drop down menu, where all modells are sorted by company-names nor it runs automatically after plug-in. Only the scanner and its respective support programm appears.
    The printer itself runs normal under windows, so we assume that the hardware is ok and the driver/software is the problem.
    We called epson in a first step they told us the software must be ok and that we should send an email. We did it but got no answer.
    Can anybody with an intel mac check if it is possible for him/her to install the driver provided from the page above (if the model/type appears in the drop down menu after installation).
    Thanks al lot for help in advance
    Patrick
    macbook pro Mac OS X (10.4.6)

    Epson, for reasons known best to Epson, often has an installer which when run installs an installer. Check to see if it did that this time, and then run the newly installed installer.
    Yes, they've been doing this for years.
    Yes, it's extremely irritating.
    Yes, they got me that way when I first installed Epsons on Macs.
    No, I can't understand their reasoning.
    No, they have never responded to to queries on the matter.

  • Problems with Epson R300 and my IMac

    I have an iMac 24 Intel Duo Core running OS 10. 4.11
    I've had my R300 since I bought the computer and it has been working beautifully until the last 4 months or so. When trying to print a dialog box popped up saying that the computer couldn't communicate with the printer.The printer works with my laptop running OS 10.4.11 as well as using CF card directly in printer. I checked the USB cable with another device in the same USB port on my iMac and it works fine too. I tried resetting the PRAM,repairing the disc permissions,restarting numerous times and eventually resetting the printer and reloading the Epson Software. Before reloading the Epson software I went to the library>printers and removed the old Epson software. I also went to Receipts in the Library and removed the Epson receipts as suggested else where on this forum. The new Epson software reload HANGS at "6 more items to load" . If I connect the printer to my IMac I can see it in the Systems profiler box as well as the print dialog box. I'd really like to use my printer. Please help!

    Hi again!
    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
    Alternate method...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    Message was edited by: BDAqua

  • Problem with HP printer and Network

    I recently purchased a MacBook Pro and HP 8600 wireless printer.  I'm using an airport extreme base station.
    I'm having trouble with network connectivity and wondered if the printer is the culprit--many times after printing, I lose my network connection completely.
    I've tried updating base station software, computer software updates, re-booting the base station, etc., but nothing seems to permanently solve the problem.
    Would appreciate any insights.
    Thanks

    Sounds like this could be an issue with the software. To start I want to be sure that we remove the software fully and correcty before we continue. Follow the instructions below and see what happens after. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
    find and install the FULL FEATURE SOFTWARE if it is available :
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3692888
    Install that and let me know the result!
    Have a great day!
    -Spencer
    PS have a wonderful day and a fantastic weekend! 

  • Problem with ticket printer and WPA2

    Hi
    I have a customer that have a couple of Datamax O'neil MP Compact4 MarkII ticket printers. It's two differents batches with different software version, one of them works perfect, but when I tried to configure the others, they just don't want to connect to the wireless. All settings are the same.
    I use WPA2-PSK on the SSID, and it's also spesified on the printer that this is a PSK-SSID. I did run debug client on the controller and it gave me the output under.
    I also tried to run it without any security at all, that worked fine. What I don't understand is why the controller tries to authenticate the client with 802.1x, it's not enabled at all at the controller. Does anyone see something that I don't?
    Controller software 4.2.206,
    Regards,
    Patrick
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: New PMKID: (16)
    Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: New PMKID: (16)
    Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d 802.1x 'timeoutEvt' Timer expired for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Retransmit 1 of EAPOL-Key M1 (length 121) for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: New PMKID: (16)
    Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: New PMKID: (16)
    Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: New PMKID: (16)
    Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated

    Hi Patrick,
    It looks like that client is actually trying to do wpa vs wpa2:
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL  version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    change/add that wlan to wpa/tkip and see if that works.  if it does, and you've got the ticket printer configured for wpa2, there's a problem with it (maybe it needs to be rebooted for wpa2/aes to take affect? just a guess)

  • Problem with Dell Printer and Wireless Router

    I have a new Linksys Wireless Router (3100) and it handles 3 laptops, PS3 fine.  But I have a Dell 715w network printer (also new).  I have it set up on the network, and it works fine upon setup.  The problem is the printer does not work all the time.  Sometimes I can get an error message, sometimes it says it is busy, and other times it literally takes a long time to load and then does not print.  I usually can get it to work again by rebooting and turning off the router and printer and laptops, but this hit or miss is very annoying and I never know when it will do this again, usually after a week or two. I wonder if the problem is that the 3 laptops all have different OS - XP, Vista and Windows 7.  Dell tech support won't help as they say they don't support routers, but I am wondering whether the problem is ina s etting or if this printer is malfunctioning.  any help would be appreciated

    Yes. You have to key-in the IP address to the printer.
    Basically, if the printer is set to obtain IP address from the router, it will be provided with a random IP or any IP available for the next device that will connect, on this issue, your printer. So there's no permanent IP address for the printer, making it a little hard to find at times. Compare it with the a static IP, your computer can easily map it since it doesn't change.

Maybe you are looking for