Problem with Essbase add-in 9.2.1 and office 2010.

Hi all,
we have a problem with Essbase add in 9.2.1 and office 2010.
Every time when a user opens Excel a new (additionally) euntry in the ad-on menue appears.
Indeed what happens is, that the add-in is loaded n-times.
At the first start of excel one time, second two times and so on...
Thtas's very annoying.
Can someone confirm this issue or even better know a workaround.
(A way we have found so far to ease the pain a bit -well only temporary- is to disable the ad-in, close Excel and start it again.
However with every new start of execel the issues begins again.
But that's not a solution you can recommand to the end user.)
Any help is welcome.
Thank you in advance!
Andre

Have a read of the following on Oracle Support - Support for Office 2010 in Essbase Excel Add-In and Smart View [ID 1191235.1]
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Problems with a shared calendar using Outlook 2007 and Exchange 2010

    Hello all,
    We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
    I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
    who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
    One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
    of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
    I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
    am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
    I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
    able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
    So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
    one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
    I realize this is a big mess, and your help would be greatly appreciated.

    Hi Nigel,
    How is the impact, just one user or all users, Outlook or OWA?
    If just one user, it seems like an issue on the Outlook Client side.
    Please trying to re-create new profile to fresh the caches.
    Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
    Found a similar thread for your reference:
    Calendar Sharing not available error message
    http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!

    I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!
    also regular download doesn't show my any thing !! and I can not even resume my files ....
    i know these are direct links and i should be able to resume my downloads any time ( i have this option before )

    If an extension isn't working properly then you need to take this up with its developer.
    *http://www.downthemall.net/

  • Essbase Add-in and Office 2010 double clicking drilling down issue

    We have Office 2010 and Essbase Add-in 6.5.4 and some users are having issues when double clicking to zoom in. When using the double-click to drill down, it flashes a few times and drills down to the lowest level even though it is setup to zoom to the next level. It works when you use zoom in from the menu and this doesnt happen to all the users. Does anyone have a fix for this issue?

    We had similar issue but with lower versions of excel where a double click acts continously till the lowest level is reached for the member selected. Notice that all the members are not at the lowest level, it only happens for the current selected cell in excel.
    In my case a re-install of add-in worked. Have you tried re-installing add-in. See that unistall is complete before re-installation. As you understand the problem is not with all machines/users, hence it should not be an issue with add-in.

  • There was a problem with FaceTime. You need to quit and open FaceTime again.

    HELP!!
    "There was a problem with FaceTime. You need to quit and open FaceTime again." pops up everytime i try and open facetime!
    I have tried doing everything that people have posted to try and fix this problem...NOTHING has helped!
    what do i do!?!?

    I got it to work, by observing and doing the following...
    1) Console showed a permissions error accessing ~/Library/LaunchAgents/com.apple.imagent.plist. Turned out that folder was empty and only 'system' had access to write to it, so I set my main user as having read and write access (Get info on the folder, add the user at the bottom under permissions)
    2) Still wouldn't work, but I saw something about imagent. Searched my hard drive via terminal for it, and found that inside the FaceTime app is an imagent.app. So, I launched that. It has no interface but shows up on the Dock.
    3) Launched FaceTime. Yay! It works! BUt I have to launch imagent manually first.
    4) Went back to ~/Library/LaunchAgents and deleted the com.apple.imagent.plist file which was still at 0 bytes. The next time I launched FaceTime, it created that file, and didn't need imagent.app to launch manually.
    Your mileage may vary, because you may have different errors.

  • I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

    I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

    There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

    can anyone help
    i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

    Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
    Mylenium

  • I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    Hello, Toro Silva. 
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • Problems with a VBA Userform using Multipage (2) and DTPicker.

     
    Hi
    Problems with a VBA Userform using Multipage (2) and DTPicker (4)
    On Page1 I've got 2 DTPicker, one for the date and the second for the time.
    Same thing on Page 2.
    Problem:
    Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
    Same thing if I close on Page 1 then just the set on Page 1 will work.
    As anyone seen this problem and any work around you may think would help.
    I'm using Windows 7 , Ms Office Pro. 2003
    same problem on Windows Vista , XL2003
    Cimjet

    There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
    the output to the worksheet from text to date values.
    Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
    maintaining the format.
    I think you will find the example now works.
    Revised Example
    Graham Mayor - Word MVP
    www.gmayor.com

  • I already have a fire-fox sync account. as i have problem with fire-fox i have uninstalled it and re-installed. and sync accnt deleted by mistake..how restore?

    I already have a fire-fox sync account. as i have problem with fire-fox i have uninstalled it and re-installed. At firefox sync accnt deleted by mistake..how restore? i also have recovery key but its not working...

    https://support.mozilla.org/en-US/kb/firefox-sync-troubleshooting-and-tips
    https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
    https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account

  • HT1976 i have problem with my iphone, it;s never lock and not read sim card, before reinstaling 6.01, thnx juliany

    i have problem with my iphone, it;s never lock and not read sim card, before reinstaling 6.01, thnx juliany

    If you are both on the T-mobile network, the sim card should work.  If you did a Erase All Content and Settings, then she should be at the point of activation as a new device...talk to T-mobile and be sure the sim she is using is a valid sim card.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • I have a problem with my itube. I had itube and its gone. Now i cant get it back. How can i get it back without pay for it again?

    I have a problem with my itube. I had itube and its gone. Now i cant get it back. How can i get it back without pay for it again?

    We are Apple users here, and we answer technical questions.
    Sorry, we cannot help you.

  • I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime. You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.

    I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime.
    You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.

    @ reichard
    yeh man i have the same problem i think when i open the ****** facetime it dosent open there is a line in facetime icon it dosent open i dont know how it work **** i want it to work hope someone help me thx

Maybe you are looking for