Problem with explorer.exe when LR starts

When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAM

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Similar Messages

  • Why is there a problem with Setup.exe when upgrading from 2.0 to 3.6.3?

    I am trying to upgrade Firefox on a laptop that currently has 2.0. I downloaded 3.6.3 and opened setup. I get an error message indicating that setup cannot run setup.exe. It advises I restart my computer. When I do, it does no good. Please advise.
    == This happened ==
    Just once or twice
    == I tried to upgrade from 2.0 to 3.6.3.

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
    http://sourceforge.net/projects/kernelex/

  • Can't get in the internet (no problems with explorer) it says untitled and when I click on abokkmark it says loadind for about one splitsecond and back to untitled

    I cannot open any site with firefox, but have no problems with explorer. on the tabbar ontop it says untitled and when I click on ant bookmarsite or click on a link in an email from outlook, the untitled will change into loading (for only one split second) and right back to untitled.

    Maybe these will help:
    https://discussions.apple.com/message/17677533#17677533
    https://discussions.apple.com/message/18324129#18324129
    https://discussions.apple.com/message/18203126#18203126

  • Machine.config entry problems with ODAC1110510beta.exe

    The ODAC1110510beta.exe adds entries under the <membership>, <profile>, and <roleManager> config sections in machine.config.
    The problem is that the entries are added like this: (edited to save space)
    <membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
    <providers>
    <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />
    <clear />
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
    </providers>
    </membership>
    The OracleMembershipProvider was added in front of the AspNetSqlMembershipProvider. Then a <clear/> was added afterward -- removing the OracleMembeshipProvider that was just added. Obviously, that is not very useful. The same thing occurs in the Profile and RoleManager config section.
    Please modify the install to added the Oracle provider entries at the end of the prooviders list.
    <membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
    <providers>
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
    <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />
    </providers>
    </membership>
    Thanks,
    Jim

    Hello faustina,
    According to the link below, this error may occur if there is a process that is attempting to log data to a database that does not exist or that Citadel cannot access. The root cause of this can be anything from a firewall, a corrupt process in the Distributed System Manager, or possibly the result of deleting different databases through Windows Explorer rather than using Measurement & Automation Explorer (MAX) (which doesn't seem to apply here). I've also included a customer forum below regarding this same error in which stopping all processes except for "System" and restarting the computer has solved this issue. Most likely, if you are no longer experiencing this issue and all that has changed was the installation of your software, it may have been corruption within the DSM. 
    http://digital.ni.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument (Runtime Error With Tagsrv.exe When Shutting Down Or Turning On PC)
    http://forums.ni.com/t5/LabVIEW/NI-Variable-Engine-tagsrv-exe-Runtime-Error-Dialog-Upon-Restart/m-p/...  (NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved)
    Wes W
    Application Engineering
    National Instruments
    www.ni.com/support

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Problem with searchsettings.exe (Mozilla Malware)?

    For several days I have had a screen that comes up on boot-up that says basically there is a problem with SearchSettings.exe and it will not start. I did some research and see that it is part of an iObit toolbar system and is basically malware. I found a fix online, but it didn't work so I had to restore. I think my registry cleaner might have remove part of it but I can't find out how to get rid of this annoyance.

    Hello,
    Here is a guide on how to remove searchsettings.exe:
    http://www.spigot.com/remove-search-settings.html
    It was part of a toolbar and probably the registry cleaner deleted the uninstall files for the toolbar.

  • MORNING HAVING A PROBLEM WITH MY Z10 WHEN I SWITCH ON IT SHOWS THE LOADING LOGO AND NEVER COMPLETES .YOUR HELP WOULD BE APPRECIATED THANKS

    MORNING HAVING A PROBLEM WITH MY Z10 WHEN SWITCH ON IT SHOWS THE LOADING LOGO AND NEVER COMPLETES THE LOADING PROCESS.YOUR HELP WOULD BE APPRECIATED

    Checkout this thread: http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-stuck-on-loading-logo-on-starting-up/td-p/2517909

  • What is the problem with IPhoto ´11 when I am uploading a photobook to apple store, there is always an error. Anyone ???

    What is the problem with IPhoto ´11 when I am uploading a photobook to apple store, there is always an error. Anyone ???
    evrything is right wite my appleID.

    First try to create a pdf file of the book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it.
    If you are unsuccessful in creating the pdf file then boot into  Mac OS X: Starting up in Safe Mode and try again.  If that works you can continue and order the book while in Safe Mode. 
    Be sure to keep the pdf file of the book to compare with the printed copy when it arrives.
    OT

  • Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

    Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

    A Fix for "Your network preferences have been changed by another application" Error 
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting.
    (10.4.10)
    Use Software Update to update your OS to last version of Tiger.  Install all the other updates that goes along w/it.

  • I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

    I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

     
    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup 

  • Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    Try reinstalling Combo Update.
    http://support.apple.com/kb/DL1676
    Best.

  • I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

    I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results  

    Hello SuzMiller
    Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Maybe you are looking for

  • Gentoo installation: error while loading shared libraries

    Hello, I am trying to install Free JSP editor on Gentoo with 2.6 kernel. I get errors about loading shared libaries (full output below). I am almost sure that it is caused by LD_ASSUME_KERNEL=2.2.5 in install script but i dunno how to prevent it from

  • IPod nano 7th gen (brand new) doesn't recognize Headphones

    I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a reg

  • Change language of Collaboration invitations

    Hi Everybody, is there a possibility to offer the email for the Collabortaion Invitation in two different languages? By default there is only the english language available. I can change the properties under Collaboration->room backend mail but i nee

  • I want to post the values of the form in the same Jsp Page

    I want to post the values of the form in the same Jsp page.

  • Where are my iPhoto photos?

    So, I made the mistake of clicking on an old iPhoto library icon.  Then went no further. Just now, I went to open iPhoto, and was forced to "upgrade" to use the old library. NO OPTION FOR YES OR NO...! Now, I have  2003-5 iPhoto pix. ***** Where do I


HashFlare