Problem with export size @ Premiere CS3

Hello, I have a problem that until recently did not bother me so much and that the final export @ the premierCS3 ( also @ CS4 and CS5 )
The films I make are 5-10 minutes long, so usualy the final size is big, but still not THAT BIG! and i can work with this size.
Lately I've edited a feature film and the final export is 25GB and it simply intolerable that even after encodings using simple software I got to 7Gb and quality went down significantly.
How do I solve this trouble? I do not think that movie that long (1h:45m) should be bigger than 1GB!!
Hope you can help me
Wishing you a good week,
ROEi.

Go to the PPro FAQ List http://forums.adobe.com/community/premiere/faq_list and read about export options
A DV AVI file is about 13Gig per hour... export size is determined by the CODEC and compression used, plus the data rate
Some CODECS have better compression than others, and a higher data rate will create a larger file
You need to tell what CODEC you are using for export, and what data rate

Similar Messages

Problems with exporting in premiere

Hi there,
Having a few problems with rendering out from premiere and was hopping someone could help?
I am making a showreel and all the clips I'm using have been rendered out from After effects at either 720 x 576 (16 x 9) or 1024 x 576 (square pixels) using the photo - JPEG codec at 100% quality. When I play these in QT externally, they look great so there's no issue with the way they look before entering Premiere.
When in Premiere, The preview renders don't look great but I understand these are for Preview purposes only so I'm not too concerned about that. However, when I go to export, I use the same settings QT, Photo-JPEG best quality etc and they just exprt really pixellated like theres a bitrate problem somewhere. I've tried using a few different codecs and i'm having the same problem.
Any help would be greatly appreciated!
Thanks,
Matt

Matt,
What version of Premiere are you using? This is the Premiere, and not the Premiere Pro forum. This was the program that preceded PrPro, and a totally different app. The PrPro forum is HERE. You'll get a lot more traffic over there, with expert help with PrPro questions.
Good luck,
Hunt

Problems with After Effects/Premiere CS3 in Vista

I have read through a bundle of solutions to this problem and haven't found anything that has worked yet. I ran After Effects and Premiere Pro on Vista up until two days ago when it refused to open. When I try to open Premiere, it gives the message "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attemp to save your current project." When I tryo to open After Effects, the firts try does nothing. The second attempt will open After Effects, but all interfaces are missing and all the dropdown menus are grayed out. When I close it, it says After Effects has crashed, contact support, error 0:42. I have uninstalled/deactivated and reinstalled, run codec sniper, removed xmi preference settings and nothing works. Does anyone have any suggestions?

Did you run the CS3 Clean Script? If not, please do so before attempting any reinstalls. More info on such stuff here and here.
Mylenium

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Problem with Cell size in Excel output of XML report

Dear all,
I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
Thanks
RAJ

Hi ,
You can try with
<xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
may be helpful to you
Thanks,
Ananth
http://bintelligencegroup.wordpress.com/

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem with font size, not showing up as expected.

I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
Ken

John Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Problem with Exporting Data to Excel

Hi Everyone,
I have problem with exporting the data to a excel file. I am using a XP
system in German which uses comma "," as the decimal point , and I also set
"Use localized decimal point*" under the FronPanel Options to be true. But
the exported excel file can not recognize (or just ignore) the comma for a
whole column (flow rate), for examle "1,234" (1.234 in non-german system)
would be 1234. But if I open its text file where the data came
from by calling Excel directly, there will be no problem. Is this a bug of
LabVIEW, or I forget some settings?
Thanks a lot!
Le
P.S: The LabVIEW version is 8.2.1 and the Office version is Office2007.

Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ?

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with export files

Hello,
I have got the version 5.3, original.
I have a problem with export files. After work with a lot of picture in dng format, I try to export all picture in jpg format, but the number of pictures exported are less than the original number.
Why?
Thank you in advance

There is nothing you are doingt wrong, the web people need to check their Flash stuff, most importantly realyl include al lthe files you provide them with. there's a reason why it spits out 4 files...
Mylenium

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Summary: Problem with export (maybe...terminated sucEE to XE issues exp/imp

Summary: Problem with export (maybe...terminated successfully with warnings) and import (IMP-00022: failed to process parameters)
I used PL/SQL developer to make a parameter file (initially I used it to export, then I just stole the file to try again). It contains 100 tables from a single schema.
Export from prod DB using exp parfile=test.par: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses ZHS16GBK character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table CONTRACT_INFO 12 rows exported
EXP-00091: Exporting questionable statistics.
'Export terminated successfully with warnings.' !!!I want to import into the cs2_user schema (same privileges as on the production DB) trying:impdp 'sys as sysdba'@danieldb schemas=cs2_user dumpfile=test01tables3.dmpThat gets the error: UDI-00014: invalid value for parameter, 'attach'
I then thought maybe you have to use imp/exp or impdp/expdp instead of a combination (exp + impdp) so I tried: imp 'sys/admin as sysdba'@danieldb touser=cs2_party_owner file=test01tables4.dmpbut then I just get: IMP-00022: failed to process parameters
Anyone see why its all failing? :s
Mike

you must input SID name into single-quotes like:
C:\Tools\Oracle\product\10.2.0\db\NETWORK\ADMIN>expdp 'sys/manager@stb as sysdba'
Export: Release 11.2.0.1.0 - Production on Thu Feb 9 13:46:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
UDE-06550: operation generated ORACLE error 6550
ORA-06550: line 1, column 11:
PLS-00201: identifier 'SYS.DBMS_UTILITY' must be declared
ORA-06550: line 1, column 11:
PL/SQL: Statement ignored

Problem with export size @ Premiere CS3

Similar Messages

Maybe you are looking for