Problem with fast forward of trackball in media player of 8330

I'm a fairly new BB owner of a Sprint 8330 Curve. I've checked the newbies site on Crackberry and checked here also. Can anyone help with this problem:
I've downloaded some MP3 audiobooks from my local public library. They play fine, but the problem is that it always starts at the beginning every time. The book is in multiple parts, each of which is 60 minutes long, each of which is treated as a single song. I can see the reverse, pause, and fast forward buttons but I can't get the trackball to work with them.
When I scroll the trackball to the right to fast forward, it scrolls to the next part of the book, not within the same part (song). When I scroll the trackball left, it goes back to the last song. When I scroll it up or down, the whole playlist shows up on the screen and I can scroll through those.
I found one post that talked about how to fast forward video, but it showed a different screen that mine.
I just can't get the trackball to position itself on the progress bar or on the controls.
Any help would be greatly appreciated!
Thanks.

I've got the same problem with my BlackBerry 8330. I have v4.5.0.169 (Platform 3.4.0.51). Once i start an audio file, I am unable to select the scroll bar above the play so that I can fast forward through the song, book, etc.

Similar Messages

Problem with "play to device" on windows media player

Hello, I'm having a problem with the play to device feature of windows media player. I am trying to use it to play music files to my T.V. It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens. No error messages or freezes either, it's as if i never clicked play. I thought this might be a limitation with the t.v. or my network
(im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs. Therefore, i know this is a problem with windows media
player and not my t.v., network or computer. This is a problem because i don't want to play all my music, just my playlist. Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
is not only time consuming and tedious but takes up space on my hard drive) how do i remove this limitation or otherwise get around it? Thanks!
P.S. Out of curiosity, why does this limitation exist and what causes it?

when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.
Hi,
According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
If so,I think this method is different with "play to" feature.
Also,we haven't found any limitation with Windows media player.
Regards,
Kelvin Xu
TechNet Community Support

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Problem with call forwarding. Calls can not be forwarded for incoming external calls

Hi Everybody, how are you?
I have a problem with call forwarding. Everything was fine but now is not working.
In the reception of an office, the receptionist activate the call forward option to an internal extension. If somebody, internal in the office, call to the reception, the call is forwarding to the extension configured. But if I call from the outside (in example, from my cellphone) the call is not forwarded to the extension configured and continue ringing in the reception phone. Why this behavior? Any idea?
If you know something please tell me.
Thanks. Best regards.
Andres Collazos.

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

Problem with Port Forwarding in WRT320N

Good day.
I have a web-server and Internet-radio translator to local network of my provider. And I found a problem with Port Forwarding. I'm trying to setup 80 & 8000 ports to forward. And it's working but only for Internet, without provider's local network. My web-server isn't accessible in local network and radio-translator too.
So is it possible to forward ports absolutely - for any type of connections?
P.S. DMZ is working like Port Forwarding.

If you ask questions you have to mention that you have an PPTP connection to the internet and another network directly on the internet port. Otherwise noone will really understand your question as it is a very unusual setup.
Your setup is not one really supported by the router. You are lucky that it works but don't expect too much. Port forwarding only the internet connection. If you use PPTP the network on the internet port is basically hidden. Using that local network on the internet port is not supported.
The DMZ host is the IP address to which all ports are forwarded to which are not forwarded otherwise. The same restriction applies here.
I would recommend to ask your ISP which router they recommend for their internet connection. I think most/all Linksys routers and many other brand's consumer routers won't really support a setup like yours...

Itunes won't play any cd i put in the drive (macbook pro). I am running paralells with windows 7 and have disables media player so that didn't help

itunes won't recognize/play/import any cd i put in the drive. I am also running paralells with windows 7 and have disabled media player. any suggestions?

I have the same problem.
On launch itunes works fine.
If I let it play through a full album of songs unatended, when I return it respondes, but will not play music. I can browse my collection, but when i click the play button, press the space bar with a track selected or double cclick a track it will not play. A restart of iTunes solves the problem temporarily.

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Problem with Port Forwarding (when PPTP is up) in WRT-160N

Hi, everybody!
I'm looking for some help with Port Forwarding in my new router from Linksys. I've bought the router afew daysago, and was badly surprised when I found out that there is DD-WRT firmware is installed in it (the router was 100% NEW when I've purchased it). I have downloaded the latest original Linksys firmware file and successfully flashed it.
But I still have problem (same I had on DD-WRT firmware too) with port forwarding for my DC++ and Vuze (app for torrents): I've written port forward for ports 49151 (for Vuze) and 4000 (for DC++) to be forwarded to my desktop computer (IP 192.168.1.201) -- I've seen a post at this forum, that there could be a problem, if you forward to an IP, which is inside DHCP local zone, so I've forwarded it to .201 IP (my local DHCPzone is 192.168.1.100 - .149). But forwardind doesn't work ((
What's wrong?
My configuration:
Router IP: 192.168.1.1
PPTP (I've got it from my ISP)
IP address: 192.168.226.127
Default Gateway: 192.168.226.2
DNS 1: 192.168.1.1
DNS 2 & 3: 0.0.0.0
PPTP Server IP Address: 192.168.226.2
Username: ****
Password: ****
Single Port Forwarding:
Application name     External port     Internal port     Protocol     To IP address     Enabled
Vuze 49151 49151 Both 192.168.1.201    Checked
DC    4000 4000            Both           192.168.1.201 Checked
Solved!
Go to Solution.

As you have mentioned in your post that your ISP has provided you a PPTP connection with an IP address: 192.x.x.x. The IP address which is provided to you by your ISP is in a Private Range, and if you try to forward any ports on your router it will not work, as your ISP modem will block that port. So you need to get a Public IP address from your ISP.
As you are getting Private IP from your ISP, so this connection is called as NAT behind NAT, and your Modem is acting like a Router.
So now you have 2 options, get the Public IP address from your ISP or change the connection type.

Interlace problem with fast pans, camera moves... any advice?

Hello: I have a video project, edited in FCP (from SD DVCAM tape source). I exported as a standard 4:3 Quicktime movie, and then encoded as H264 video using the multipass 3ivx codec in Cleaner.
I now get a blurred horizontal line on camera pans. The blur appears as a broken line on the lower third of the picture.
Should I not tick the "Adaptive" box?
I have tried using the de-interlace Eliminate Top Field and the Interlace Auto settings. In both cases I ticked the adaptive box. In both cases I still get a blurred broken line in the lower third area of the video on camera pans.
I tried a third experiment using DVFilmMaker. I set it up to de-interlace only on movement, and to blur horizontal lines on Motion (thinking this might help to at least give a more natural look to the picture break-up I was already getting).
Alas, no improvement.
Yes, if I had a time-machine and extra bucks I would have shot Progressive... but I didn't... so I'm trying to get the best out of what I have.
Any thoughts... anyone?
Thanks
A
Message was edited by: Adrian Smith4

Thanks for the info. Just for the record, I have tried all these things too in Compressor, QTPro, Cleaner and DVFilmMaker. I get the same problem with all (a blurred line on fast camera pans)
My preference for Cleaner (and it's only my opinion) is that it has a more intuitive user interface for correcting gamma, color, image size, bit-rate, without having to search or go to multiple menus. You also see the video as it encodes and visually check any problems with gamma, etc. You can also do a visual before/after check. I guess it's the devil I'm used to.
Thanks for all the info re. alternatives to Cleaner... but it's not really addressing my original (and existing) problem.
Thanks
Message was edited by: Adrian Smith4
Message was edited by: Adrian Smith4

Audio Problems with Fast/Slow/Reverse Effect in iMovie HD

I have been having problems with the Fast/Slow/Reverse effect in iMovie HD with my movie clips. Whenever I apply the effect (reversing at the same playback speed, not sped up or slowed down), when it is finished rendering the audio is choppy, yet on time (but still backwards, as wanted). Before applying the effect, the preview of it works flawlessly, it is only when it is applied that the audio gets choppy. Extracting the audio will not help either because the video will still be playing backwards while the audio will be playing normally (since it can't be reversed on its own). I have tried other effects on the same clips that don't effect the audio and they work perfectly. Any suggestions? I'd really appreciate your help! Thanks.
Macintosh Powerbook G4 Mac OS X (10.4.6) iLife '05 : iMovie HD

Have you got an isolated hard drive with ALL of the required applications and other resources together with the operating system ? Using an external HD to SAVE a running iMovie project is asking for problems. Back up the Project on another HD sure, but don't use System on one HD, running files on another.
Hope Helps,
Ernie Lee

Problem with the audio when creating optimized media...

I am having a problem with the quality of my audio after I transcode the clip to optimized media. It sounds fine originally, and I have listened to the clips when I first import them, and they sound fine, it's only after they're optimized that they sound bad. There is a clicking sound that is randomly distributed throughout the clip. I thought at first that maybe this would be fixed after I published the content, as the whole point of optimized media was to make it lesser quality to improve performance while editing, but even when published the clicks could be heard distinctly. I tried editing the content with out optimizing the mdeia, but the editing is too slow as I am working with high quality media.
Has anyone had this problem? Anyone have an idea on how to I might be able to fix this?

One way would be to make sure the Preferences window under the Import tab says not to use optimized media. Then go to the timeline and Control Click the clip. Choose Reveal in Event Browser. This will select the clip in the event browser. The originally specified in and out points will be represented in the yellow border on the clip. Then in the File menu choose the Import ... Files and specify the original media. The clip in the event browser will be filled in again from the new import, and the timeline clip will also be replaced with the new material. In and out points will be honored and effects will still be in place on the timeline clip.
Now, I use this procedure to reconnect clips all the time ... I have not used it before to switch formats from optimized to original media so there is a little guessing here on my part. The option, of course, is to simply reimport from a camera archive or the camera of the SD card into a new clip then replace everything ... Again, this would need to be done having turned off the preference item to use optimized media. Hope this helps a little. Best wishes.
stephen

Trouble with Fast Forward in Sony cassette TCD5M

All functions work well except when placed in Fast Forward, the speed is intermittently slow and stop.
What needs to be adjusted?
Xeno

I need more information about the issue:
1. Are you using the correct tape?
2. Does it happen on all tapes that you've tried?
3. Were those same tapes played fine before?
4. If the same problem happen on all tapes, try cleaning the tape heads. Attached are the steps:
5. If issue recurs on all tapes then service may be required.
If my post answers your question, please click on "Accept as Solution"

Problems with call forwarding setup

I just got an iPhone and it's great, except for one annoying problem with the call forwarding behavior.
With my old RAZR phone (also on AT&T) I had two choices when turning on forwarding, "forward immediately" or "forward when unavailable". I used the second choice and had forwarding turned on all the time. Calls would go to the cell phone first but then forward to my home number if I was on another call or didn't answer after a couple of rings. That behavior is important because I want all voice messages in the same place, on my answering machine at home, regardless of whether my cell or home number was called (so I want to deliberately bypass AT&T's voicemail system).
However the iPhone seems to only have the "immediately" behavior, which means I don't have a chance to answer a call on the iPhone before it forwards, and the iPhone doesn't even log it as a missed call. The forwarding setup is stored in AT&T's system so it seems like the capability should be there regardless of the type of phone, and this is just an arbitrary user-interface restriction with the iPhone. Anyone know how to work around this and get the "forward when unavailable" behavior?

Jason -
Thanks, this did the trick. The instructions under the section for "former AT&T Wireless customers" worked perfectly (perhaps because I am actually a former AT&T Wireless customer; I've had the number for almost 6 years, since before the merger with Cingular). Anyway, I dial 61xxxxxxxxxx# (xxx = the number to forward to), make the call, and a confirmation message appears on the screen; now the forwarding is working just the way I like it.
Thanks again!
Bob

Please help I have problems with songs,podcasts,and just general media play

hey guys, I'll get straight into it. My problem is that many of the songs and podcasts in my library come up with the little exclamation mark when I havn't changed anything or deleted anything, so I have to find the original files, which occasisionally just dissapear for no apparent reason. Also I have problems with d/l podcasts as sometimes it wont d/l the newest edition etc but comes up with the little '!' mark. I have just upgraded to iTunes 7 and although the problem was occuring before the upgrade just aggravated it, and messed up my library files causing me to revert to an older library.
Now last and most importantly, my audio has suddenly become choppy since I upgraded. This is similar to the problem I have with the sound in Quicktime only working properly if I keep all other apps and tasks to a bare minimum (even if they take up barely any system resources). This seems strange as my system is not exactly poor performance.
Thanks in advance guys !

Hi,
If you right click a file, and do getinfo on the summary page this will give a file location, is this matching the file location on your hard disk? If not that might explain the exclamation marks?
Kind Regards
Rich

Problem with fast forward of trackball in media player of 8330

Similar Messages

Maybe you are looking for