Problem with Folio Builder - added articles are "spinning"

Hello,
today we are experiencing strange problems with Folio Builder. We are adding new artcles to folio created today and all added articles have same issue - spinning wheel in folio builder. Such articles we can't see in Content viewer until we delete existing folio.
Thanks for help

Hi,
Could be that there was a network problem when uploading the InDesign documents.
Try to select the articles and delete them with the trashcan. And then reupload the documents from InDesign.
Good luck!

Similar Messages

  • Error with Folio Builder - Adding Article

    I have downloaded the latest Folio update and am using 12.3.3 with CS5.5
    When I try to upload an article to my folio, I get the error message - An error has occured while updating article layouts. the InDesign file cannot be found
    How do I fix this ??
    Adding open InDesign article and Importing both do not work

    Unless you have a specific reason for using an older viewer version, use the most current version.
    Use an older viewer (such as v20) if you need to publish folios for an older custom viewer app that you've submitted to the app store but haven't updated.
    For example, let's suppose that you have a v21 viewer in the Apple App store, and you want to publish a new folio. If you publish a v23 folio, your customers will get a "Please update your app" error message when they try to download it. But if you publish a v20 or v21 folio, your customers can download it just fine.

  • Problems with Folio Builder Pannel. I can´t start session

    I´m having trouble with the folio builder pannel, i´m triying to start a new session using my password but i can´t, it says "Error de inicio de sesión [svr.InvalidLogin]", help me please.
    Thanks

    It sounds like an old password has been captured in the auto-login settings and is preventing you from entering the current, correct password. To remove the captured password, so the following:
    1) Quit InDesign and any other CS apps
    2) Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager
    3) Next delete this file based on version:
    /Users/lnegi/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
    /Users/lnegi/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
    4) Then remove this item from the Keychain Access based on version:
    Adobe-CS-5-renga
    Adobe-CS-5.5-renga
    To remove from the keychain:
    Navigate to /Applications/Utilities and launch the Keychain Access.app
    If the lock icon in the upper left appears locked, click on it and enter your password to unlock it.
    Select the “login” item in the Keychains list in the top left.
    Select “Passwords” from the category list.
    Type “renga” in the search field in the top right.
    Select any matches and press the delete key.

  • Problem with Folio Builder sign in

    I'm working on Indesign CS6 and I've updated my DPS desktop tools, in their version 29.0.0, but the Folio Builder don't let me sign in. What can be the problem? Thanks

    After several hours (4+) trying every combination described here and elsewhere, what ultimately worked was uninstalling ALL Adobe software and starting from scratch.
    1.  Uninstall any and all Adobe software:
    Adobe AIR
    Adobe Flash
    DPS App Builder
    Adobe Creative Cloud
    Adobe InDesign
    Adobe Photoshop
    Adobe Illustrator
    Previous downloads of installers
    Etc.
    2.  Clear all system and user caches, preferences, bootcaches, kextcache, etc.and reboot (whether necessary or not; just for good measure).
    3.  Run the Adobe Creative Cloud Cleaner Tool to confirm everything was removed.
    4.  Reboot (whether necessary or not; just for good measure).
    5.  Confirm no Adobe affiliated process is running in the Activity Monitor (or Task/Process Viewer in Windows).
    6.  Download a new clean installer for Adobe Creative Cloud.
    7.  Cross fingers.
    8.  Install Adobe InDesign.
    9.  Reboot (again, just because).
    10.  Install Adobe InDesign updates (which should download the necessary DPS tools too).
    After all this, the Folio Builder finally appeared and began working again for my computer. 

  • Strange problem with my build JAR

    Hiii everybody... I'm having a strange problem with my build (JAR file)... when I work with the Eclipse and I click in the table that returns the clients stored in my PostGre database it works fine, but when I build my application and it generates my JAR file and I open it and click in the same table to return the objects that I have.. it does not appears anymore.. just show when I work with eclipse... and the database is the same for both.
    I already checked the database path in my properties file... and the application recognize the database because I can login and there isn't any runtime exception...
    In that application I work with Hibernate and Spring... for me it is very strange because the application works fine when I run by eclipse... but does not return the database data when I click on my Jar file to open the application..
    Someone can help me with that?
    I dont know if the problem is in the Spring, Hibernate, Libraries...
    thanks in advance...

    So what's the error then? Are there any error messages? Have you checked the console? Or are you just clicking on the jar and you wouldn't even see the errors if there are any?
    What do the logs say?
    You're not giving a lot to work on here.

  • Problem with Weblogic Builder SP1

    I have a problem with Weblogic Builder SP1. I basically re-used my EJB deployment
    descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loading my EJB
    in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
    I re-attempted by jarring my EJB with WL5.1 descriptors and used my friend's WB
    (not SP1) to export new descriptors which I used to re-jar. This new EJB is again
    not recognised by WB SP1?
    What is wrong?

    The exception is as follows:
    Opening module myproj.jar
    java.lang.NullPointerException
         at java.util.Arrays.sort(Arrays.java:1181)
         at weblogic.marathon.model.EJBJarCMBean.initRelations(EJBJarCMBean.java:1212)
         at weblogic.marathon.model.EJBJarCMBean.initBeans(EJBJarCMBean.java:1098)
         at weblogic.marathon.model.EJBJarCMBean.setup(EJBJarCMBean.java:1144)
         at weblogic.marathon.tasks.OpenModuleTask.getEJBModule(OpenModuleTask.java:156)
         at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:191)
         at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:230)
         at weblogic.marathon.tasks.OpenModuleTask.runBackground(OpenModuleTask.java:89)
         at weblogic.tools.jellybeans.core.task.TaskThread.execute(TaskThread.java:127)
         at weblogic.tools.jellybeans.core.task.TaskThread.run(TaskThread.java:64)
    Module myproj.jar descriptors failed to load
    The EJB has no problem deploying.
    Rob Woollen <[email protected]> wrote:
    You'll have to at least show us the error you get from marathon.
    Does your application deploy to the server?
    -- Rob
    Robin Tan wrote:
    I have a problem with Weblogic Builder SP1. I basically re-used myEJB deployment
    descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loadingmy EJB
    in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
    I re-attempted by jarring my EJB with WL5.1 descriptors and used myfriend's WB
    (not SP1) to export new descriptors which I used to re-jar. This newEJB is again
    not recognised by WB SP1?
    What is wrong?

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

    Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

    Hi dear,
    it's funny, real funny.
    I think the programmes have diffrent sound system from the normal calls system.
    All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
    you'll hear the sound.
    I hope that would help.
    All the best

  • Problem with "small black line in right margin" with Folio Builder / Adobe Viewer in Ipad. Id CC.

    Hi there,
    When I create a Folio Builder and I check my Id project in the Adobe Viewer (It happens in the Ipad App and in the Desktop Viewer), I can see a black line in the right margin (maybe 4 px). And I can't adjust my background (It's an object with a colour) to use the "full resolution available for the app in the ipad", and yes, I'm using rules and I can see that my background object it's 1024 x 768. I have tryed several projects and upgraded the project to the "30 version".
    But I'm a new user with ID/DPS. So, is this a reported bug? Or I'm doing sth wrong?
    And for me, the most important question, will this problem be solved when I send my project to the applestore and DPS transform my Folio to the Store? Or what I see now it's what I will see?
    Thanks!

    Sorry! I have found an answer here in the discussion:
    http://forums.adobe.com/message/5835960#5835960
    So, the problem will be solved in the final app, and it's just the scroll in the Viewer.
    Thanks!

  • Poor Quality of PDF pages with Folio Builder

    Hi,
    New to DPS. First impressions are very good.
    However, when adding an Indesign page to Folio Builder as an article with the format set to PDF(to enble pinch and expand on iPad), the tiff images that are included in the Indesign page are displayed in very poor quality??
    When I change the format to PNG or JPEG, in the article, the same images are displayed on the iPad with excellent quality - however, I dont have the pinch and expand functionality, which is what I require!!
    I would really appreciate any solutions or suggestions on how this issue can be resolved.
    Indesign CS5.5, MAC OSX 10.7, iMac
    Regards,
                 Iain....

    Which iPad are you viewing your test articles on? Remember that the resolution for iPad 1 & 2 is 1024px x 768 px, while the iPad 3 resolution is 2048px x 1536px. Your images need to be formatted accordingly. Also check your image scale parameters. Anything above 100% scale of the original image will reduce the image quality. You can check this in InDesign before you ever test your article on the device. Simply press Command+1 to view actual pixel size and set your Display Performance to High Quality and you should be seeing something very close to what the final result will be. Also check that your images are RGB as well. Hope this helps.

  • Problem with Folio Producer Tools

    We've updated our Folio Builder and Folio Producer last June 19, 2012 when the new version was released. After the update, the folio we created is not compatible with the app. Then we followed the steps on the link:
    http://helpx.adobe.com/digital-publishing-suite/kb/please-update-app-download-folio.html
    "With InDesign CS5/CS5.5, you may need to revert to a previous set of Folio Producer tools to be compatible with an older custom viewer. Uninstall the Folio Producer tools, and then download and install the appropriate version."
    After reverting to a previous set of folio producer tools, we also recreated the same folio we were trying to publish and the same problem came up. Any ideas on how to work around this problem?

    Are you sure you're now on the older tools? (Check the Folio Builder panel's ID#s prior to logging in.)
    Once you are on the correct, older version, re-bundling (updating) each of the articles with this toolset will usually resolve this problem.

  • Problems with report builder 3.0 in SCCM 2012 R2 CU2

    Hi All
    I have problems with editing  (Using Report builder) existing reports  or creating new ones in SCCM 2012 R2 CU2
    We version of SQL we use is SQL 2008 R2 SP2
    I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
    I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
    http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
    Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
    Error details are
    Following errors were detected during this operation.
    * [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
    - File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
    - Source: System.Deployment
    - Stack trace:
    at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
    at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
    at System.Deployment.Application.ComponentVerifier.VerifyComponents()
    at
    System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
    options)
    at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
    at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
    at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
    at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    And in the SmsAdminUI.log I noticed the following error
    [16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
    [1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
    I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
    I hope someone can give me some advice , I am lost with this error
    Thx in advance
    Regards
    Johan

    Hi Miss Katherine,
    1. I went through the SQL steps in the link you posted
    2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
    server and the console machine.
    3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
    4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
    5. I restarted the server and the client machine
    I do get a slightly different error now after using the new DLL
    Errors With Original DLL
    ERROR DETAILS
    * [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
    - File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
    - Source: System.DeploymentERROR DETAILS
    Errors With New DLL
    ERROR DETAILS
    Following errors were detected during this operation.
    * [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
    - Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
    - Source: System.Deployment

  • Problems with the build-IN SNTP-Client on cRIO9014&cRIO9012

    Hi out there,
    I have a problem using the build-IN SNTP-Client of a cRIO-9014 (and a cRIO-9012).
    It seems that the cRIO sometimes gets another time (e.g. 28.01.1920  12:03:00) other than it should get (e.g. 31.08.2014 09:59:00).
    I've found this problem in our measurement-files. They had some unusual timestamps (as showed in the following example).
    To prevent the SNTP-Client from doing too many damages to our measurement-files, I built a time-validator (with a range of 5 min), which checks one of my servers (and let it write every time change to a log file).
    The Log-File looks like (Where "$Message" is a custom-message. It is unrelated to the problem, but occurs every minute):
    31.08.2014          09:58:00 $Message
    31.08.2014          09:59:00 $Message
    31.08.2014          10:20:00 Setting Time from 28.01.1920 12:14:09 to: 31.08.2014 10:20:00
    31.08.2014          10:21:00 $Message
    31.08.2014          10:22:00 $Message
    31.08.2014          10:54:00 $Message
    31.08.2014          10:55:00 $Message
    31.08.2014          10:59:00 $Message
    31.08.2014          11:00:00 $Message
    As you can see, the cRIO loses its time somewhere between 09:59:00 and 10:00:00(UTC) and it has been set back at 10:58:XX (UTC). It is shown with the gap between the messages at 10:55:00 and 10:59:00.
    The configuration for the timesync was:
    [TIME SYNC]
    source.rtc.enable=True
    source_priority=sntp;rtc;
    source.sntp.enable=true
    source.sntp.address=192.53.103.108
    source.sntp.interval=60
    source.sntp.port=123
    source.sntp.verbose=false
    source.sntp.log=false
    sntp.address is a public  German time-server, hosted by our national institute.
    I've set sntp.verbose and sntp.log to TRUE for more information, but have to wait some time for a logfile.
    The network has the following scheme:
    cRIO -> UMTS-Modem -> ISP-VPN -> Internet
    Does anyone have had this problem and/or know, how to fix it?
    Thanks for your help!
    Cateros

    Hi!
    The problem happens sporadically, at first, we didn't even notice it, just that there are files missing and we got the strange logs. Now, with the workaround, we can finally trace the problem (and in some cases restore our measurement).
    What do you mean with "connectthe cRIO directly to a router?"? Could you please explain it?
    In the enclosure are more networkdevices, but only the cRIO uses the connection to the internet.
    The "UMTS Modem" has also routing capacities, which we use to remote control both of the RIOs.
    Thanks for your reply
    Cateros

  • Problem with Borland Builder C++ AND NI-DAQ 6.9.3

    Hello,
    I am trying to porting a Data Acquisition application developed with Borland Builder 4.0 and NI-DAQ 6.5.1, changing data acquisition Hardware. Now I am using PCI - 6036E, with Ni driver version 6.9.3. My s.o. is Windows XP Professional.
    When I link application with nidaq32b.lib and nidex32b.lib and launch my EXE, without call any DAQ function, when I close my window PC is resetting! If I try to use Ni driver version 7.0 or 7.3, I obtain a GP fault as soon I start program.
    I think that there are problem of disallineament or other inside file EXE generated. I have tried to generate new file lib with implib utility from DLL, but with the same result.
    If anyone cannot help me, I think to substitute call to DAQ functions inside C code with DLL or EXE developed in Visual Basic.
    Can anyone give me any help for this? Is it better use VB 4.0 or VB 6.0?
    Thank you for your attention.
    Fabrizio

    Hi,
    I would definitely suggest to create the dll in VB6. There are shipping examples for VB6, so that you can see how it looks to program in VB6 with DAQ. These examples can be found at C:\Program Files\National Instruments\NI-DAQ\Examples\VBasic.
    I hope this helps. Have a Great Day!
    George

  • Problems with CF Builder + RDS + Windows XP.

    I have been using CF Builder since the first beta, however I am missing out on most of the functionality because I can't get it to connect to RDS.  I always get a 405 method not allowed.
    Where I've seen this discussed (namely on Ray Camden's site) the suggestion was to change security in IIS.  Of course IIS & security on XP is much more limited than on Windows Server.  I have tried everything I can and can't get it to work.
    Any thoughts?
    -Bill

    Hi Bill, yes, I can offer such help. In fact, I've long thought about offering a low-cost, fixed-fee option to solve any single problem.
    Your request here, and another earlier today, have prompted me to go ahead and set that up. It's now enabled as a new engagement type at my http://www.carehart.org/consulting/ page (where I also discuss how I offer this as remote consulting, via Adobe Connect, which I usually perform in providing CF server troubleshooting.)
    I help people solve problems with CFBuilder all the time (here and in other mailing lists), and I speak and write about using it extensively.
    Still, some problems are just difficult to solve in email (plus there's no guarantee of one getting a reply from anyone, including myself, here). So I'd long considered offering a service to fill that gap. The two notes today prompted me to proceed with it.
    You'll see it on the page as a "CFBuilder fixed-fee/single problem" option, for a flat $US75. That's for help in getting any one thing to work in CFBuilder, such as getting debugging to work, getting RDS to work, getting code insight to work, getting the ctrl+hover hyperlinking to work, solving slow performance problems, and so on.
    Now, if someone gets their hackles up at the thought that they should have to pay for getting a problem solved with CFB, well, of course, you don't have to pay. That's why these forums are here. But as Bill says below, sometimes people are just willing to pay to solve a problem, and again some problems are just hard to do without being able to see what's going on and more easily explain how things need to be configured.
    If paid support is not a solution for some readers, that's understandable. (I addressed this a little more in a lighthearted mention of the new option in my reply to the other forum thread here earlier today: http://forums.adobe.com/message/3056104#3056104).
    My hope would be that, with my experience solving problems, we should be able to solve most of them quickly, which is good for both of us. I'm willing to take that risk and keep it a fixed fee (compared to my normal hourly rate of $US175 for CF server troubleshooting).
    Of course, the fixed fee means there's no prorating of it if solved quickly. Think of it like a plumber, who has a fixed price for a service call, even if just to plug a single leak. You're not paying for the time to plug the leak (nor even to drive over), but for the value of stopping the leak, the plumber's knowledge of how and where to solve the problem, and his setting up a business to be there when you need him.
    Conversely, though, there are sure to be some problems where I just can't solve them, even after a couple of hours (they may even be bugs in CFBuilder). In that case, to protect both of us, I offer the option to refund your money after those 2 hours (unless you feel there was still value in other aspects or information shared during the call).
    Hope that's helpful, to Bill and to others. Feel free to mention it to others who may appreciate this when struggle at length with some CFBuilder problem.
    /charlie

Maybe you are looking for