Problem with france commodity code length.

Hi ,
I am uploading the commodity codes for country france and i am getting the error commodity code length is not correct.
i have checked the length for country for france and it is 9 but the flat file has 8 characters only.
So my question is can we change the length of the commodity code?
because these lengths are defined by SAP.
Is there any other option to upload. I can't do manually because 9700 entries are there.
Please suggest me.
Thanks,
Ibrahim.

Dear Ibrahim,
I did not use you just try
Please check with the transaction VI68 to maintain the commodity code length specific to country
Here for France you manitain length as 8 then you can try
I hope this will help you,
Regards,
Murali.

Similar Messages

Problem while uploading commodity codes useing ve94.

Hi ,
I am uploading the commodity codes for country france and i am getting the error commodity code length is not correct.
i have checked the length for country for france and it is 9 but the flat file has 8 characters only.
So my question is can we change the length of the commodity code?
because these lengths are defined by SAP.
Is there any other option to upload. I can't do manually because 9700 entries are there.
Please suggest me.
Thanks,
Ibrahim.

Syed Nasir explained it well :
Further there is a blue info button in the selection screen, which gives you instructions too.
Edited by: Jürgen L. on May 13, 2011 5:13 PM

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Problem with my exe code

Hello,
I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
Ahmet
Attachments:
front panel1.jpg ‏47 KB
Oksijen_Atolyesi.vi ‏45 KB

Hi Ahmet,
when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Oksijen_Atolyesi.vi ‏35 KB

Office Home and Student 2010 Install problems with a Key Code Err..

I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....

Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I would like for you and maybe a co-worker to check these.. before I make any changes in system..
How to Change the Trusted Installer name...
1. Right Click on the File Or directory.
2.Click On properties, on the Right Click menu.
3.Click On "" Security "" tab
4.Click On " Advanced" Button on the bottom.
5.In the advance Security Dialog Window, Click on "" Owner "" tab
6.Here you will able to see the Current Owner ( ie: Trusted Installed )
7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
9.Click the ""OK "" and exit this window.
10. Click "'OK"" again, to exit completely from the Properties window..
11. Repeat Step 1 to 4 to open the object's Properties Window again...
12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
group....
http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders.

Problem with PHP, CSS & Code Navigator in CS4

Hi,
I've got al little problem with code navigator. To show the problem, I created this 3 files:
test1.html
The CSS-Definition is defined static, with simple HTML.
<html>
<head>
     <style type="text/css">
          @import "test.css";
     </style>
</head>
<body>
      <p>Hello World</p>
</body>
</html>
test2.php
The CSS-Definition is defined dynamic, with PHP-Code.
<html>
<head>
     <style type="text/css">
          <? echo "@import \"test.css\";\n"; ?>
     </style>
</head>
<body>
      <p>Hello World</p>
</body>
</html>
test.css
The CSS-File which is imported in test1.html and test2.php
p {
     font-size:20px;
The Problem in Dreamweaver CS4
When opening the test.html - File in Dreamweaver CS4, I can easily see the CSS-Definition of the <p>-Tag in Code Navigator. To edit these definition I can simple open the test.css by clicking on the definition in Code navigator. For a complex webpage this is a greate feature. Sadly, this does not work, when I open the test2.php. Although when going to Live View and selecting the <p>-Tag I can see the CSS-Definition and the file in which it is defined in Code Navigator. But by clicking on the definition the test.css DOES NOT OPEN!
Has anybody a solution? Because many of our projects have dynamic CSS-Definitions, it would be a shame, if this would not work.
Tanks for help! :-)

I've done some testing, which might point you in the direction of an interim solution.
This is the code for related_files.php:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Related files test</title>
<?php include('include.css'); ?>
</head>
<body>
<p>This is a paragraph.</p>
</body>
</html>
This is the code for include.css:
<style type="text/css">
p {
     font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
     color:#F00;
</style>
Note that the include file contains the opening and closing style tags.
By including your styles like this in a PHP include file, Dreamweaver applies the CSS in Design view (you don't need to turn on Live View). Holding down the Alt key while clicking in Design view brings up the Code Navigator with all the details of the CSS. The one missing link in the chain is that clicking the style selector in the Code Navigator does not open the CSS file. However...
The file that contains the CSS is listed in the Related Files toolbar, so you can edit it in Split view, and see the results in Design view in exactly the same way as with an HTML page and ordinary style sheet.
As I say, not the full solution that you wanted, but it might be something worth experimenting with.

Problems with the postal code in address iview ESS.

I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

Problem with inserting html code.

Hello,
I have a problem with the inclusion of this code html connected to the CSS style sheets:
<head>
<link href='http://fonts.googleapis.com/css?family=Raleway:320,320,300' rel='stylesheet' type='text/css'>
<link rel="stylesheet" type="text/css" href="assets/normalize.css" />
<link rel="stylesheet" type="text/css" href="assets/demo.css" />
<link rel="stylesheet" type="text/css" href="assets/component.css" />
</header>
    <div class="grid">
    <figure class="effect-lily">
    <img src="assets/1.jpg" alt="img01" class="effect-honey"/></figure>
</a>
</section>
</div>
</body>
</html>
1) Does not appear in the preview thumbnail adobe muse.
2) The pull-down menu or previously entered disappears from display problems once exported the site in html.
Removing the html code menu work correctly.
Where is the problem ??

Most likely there is a critical code error somewhere. Use the W3C validation tools to check your CSS and HTML code.
CODE VALIDATION TOOLS
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Problem with SQL loader - "maximum length"

using SQL*Loader: Release 8.1.7.0.0
===================================
(full CTL enclosed below)
I have a problem with several rows, in which I'm getting the "Field in data file exceeds maximum length" error.
the DB field (referer) is a VARCHAR2(4000), and the field in the error rows never exceeds few hundred characters. According to Oracle docs I should be able to load fields which are no bigger than the DB field, what gives?
I tried the variation
referer CHAR "SUBSTR(:referer,1,100)"
for this field, which causes all the "referer" columns in the "good" rows to load no more than 100 characters, but the same error repeats for the same rows!
the input file is an IIS log, and the field is the REFERER field. its pure ASCII encoded, is there some character that cause Oracle to behave this way? is this a bug?
here is one "bad" row: the "bad" field starts with "ht
tp://web , is enclosed with quotes. I have replaced the client IP and other fields with xxx for privacy reasons.
after that, I have enclosed my CTL as well.
any help ?
Yoram Ayalon
BTW - I verified in the LOG file that the loader is reading my options for the columns as I described in the CTL. no problem there.
"2003-06-30 11:11:12" xxx.xxx.xxx.xxx WEBSRVXX 80 GET /xxx.xxx 200 0 778 1359 "ht
tp://web.ask.com/redir?bpg=http%3a%2f%2fweb.ask.com%2fweb%3fq%3dWhat%2bis%2bsign
al%2bcommunication%253f%26o%3d0%26page%3d1&q=What+is+signal+communication%3f&u=h
ttp%3a%2f%2ftm.wc.ask.com%2fr%3ft%3dan%26s%3da%26uid%3d032EBF1A318A100F3%26sid%3
d3d2bbe4f8d2bbe4f8%26qid%3d4B2346DA8A56C6418CB4DCB9091EEBA7%26io%3d0%26sv%3dza5c
b0db2%"
LOAD DATA
INFILE '/tmp/mod_websrvxx.txt'
APPEND INTO TABLE tmpLogs
FIELDS TERMINATED BY WHITESPACE optionally enclosed by '"'
(LogDate DATE "YYYY-MM-DD HH24:MI:SS", ClientIP, ServerName, ServerPort, ClientM
ethod,UriStem,Status,BytesSent,BytesReceived,TimeTaken,Referer CHAR "SUBSTR(:Re
ferer, 1, 100)" )

Use:
readsize=3000000
or some large number to raise this limit.
Check the below link for detailed explanation
http://asktom.oracle.com/pls/ask/f?p=4950:8:380010202423963671::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:2167288643374,

Problem with running sample code from XML Schema Processor for Java

Hi there,
I downloaded the XML Schema Processor for Java and tried it out. Unfortunately, it failed at the first step. FYI, I included all xmlparserv2.jar and xmlschema.jar in my classpath.
I compiled XSDSample.java with a warning: XSDSample.java uses a deprecated API. Recompile with "-deprecation" for details. There was no problem with compiling XSDSetSchema.java.
When I tried to run report.xml by typing java XSDSample report.xml, I got Parsing report.xml
NonParserException: null.
I guess that report.xml from the sample is not valid.
Could any one give me a hint? Any suggestion would be greatly appreciated.
---Denali
null

Please post this message at:
Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

Reading TDMS files in Matlab - problems with the example code

I want to use the TDMS files to store data and do offline analysis in Matlab, version 2009b (either on Mac OS10.6 or Windows XP).
To test the data import in Matlab I tried the example from http://digital.ni.com/public.nsf/allkb/0EEADA99DC7D00A4862572E30037C3A2 , but without success.
I tried either with and without the path definition (as explained on the page I referred to before) at the start, and got back the following errors:
with:
??? Error using ==> loadlibrary>deltempfiles at 559
nilibddc_m.i.
Error in ==> loadlibrary at 452
deltempfiles(delfiles);
Error in ==> Read_TDMData at 7loadlibrary([examplePath '\nilibddc'], hfile);
without:
??? Error using ==> loadlibrary>deltempfiles at 559
nilibddc_m.i.
Error in ==> loadlibrary at 452
deltempfiles(delfiles);
Error in ==> Read_TDMData at 36loadlibrary(NI_TDM_DLL_Path,NI_TDM_H_Path);
I found a few messages on the issue, dating from 2006 and 2007, that didn't lead to a satisfying solution and was hoping that, by now, there would be a solution to my problem.
Thanks a lot
Remco
Solved!
Go to Solution.

Hi Musk,
Thanks for your answer.
Unfortunately it didn't help as my problem is not discussed there. I have a problem with this line:
loadlibrary(NI_TDM_DLL_Path,NI_TDM_H_Path);
I said before that I was using 2009b, but I was mistaken, I have R2008a, but the 'loadlibrary' is opened in a 2008b editor (no idea why). On the Mac I have 2009b installed.
Thanks
Remco

GUI_DOWNLOAD: problems with table containing char length 8000

Hi
I have some problems using GUI_DOWNLOAD. Here is some of my code:
DATA: g_record TYPE Z_CHAR8000 OCCURS 0 WITH HEADER LINE.
z_char8000 is a char of length 8000
insert code to fill data in g_record
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                  = g_filename
      filetype                  = 'ASC'
        filetype                  = 'BIN'
        TRUNC_TRAILING_BLANKS     = 'X'
        TRUNC_TRAILING_BLANKS_EOL = 'X'
      TABLES
        data_tab                = g_record
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
An example of data in g_record:
Hans,Kruger,Berlin,Superstrass 3,0101709991,,,,,,,,,,,,
When I open the resulting file in notepad the above data is present, and that's a good thing! The bad thing is that for every entry I have in the g_record table the GUI_DOWNLOAD puts 8000 characters into the file (the data from g_record and trailing blanks so that the line becomes 8000 chars long). I dont want the trailing blanks and TRUNC_TRAILING_BLANKS dont seem to work. Have any of you had hte same problem and/or is there a solution?!
I have tried using filetype ASC and here I dont get the trailing blanks, but another problem hits me. I cant download more that 1024 characters from each entry in g_record and thats not good enough!
Regards Anders

Hi Andres,
take this itab-definition for your download:
TYPES:BEGIN OF ty_down,
      line TYPE string,
      END OF ty_down.
DATA wa_down TYPE ty_down.
DATA g_record TYPE TABLE OF ty_down.
regards Andreas

Creative cloud desctop application, problems with installing, error-code 49 -

Nachdem sich meine Creative Cloud Desktop App nicht updaten ließ, wollte ich sie nach der Deinstallation wieder installieren.
Habe nach Angaben des Supports die opm.db Datei gelöscht.
mit dem Adobe Creative Cleaner Tool, die Installation der Creative Cloud Desktop Anwendung gelöscht, die anderen Programme jedoch belassen. Schließlich arbeite ich damit.
Meine Anti-Malware-Programme deinstalliert. (später
Meine Firewall kurzzeitig außer Betrieb gesetzt.
Nichts hat funktioniert. Ich kann die Creative Cloud nicht mehr installieren. Es kommt bei der Installation nach einer gewissen Zeit die Fehlermeldung:
Folgender Fehler ist aufgetreten - Fehler im Installationsprogramm beim Zugriff auf eine wichtige Datei oder Verzeichnis. Versichen Sie die Installation zu wiederholen. (Fehlercode 49)
Ich habe bisher in keinem Forum eine Antwort gefunden.
Bitte antwortet wer mir helfen kann!!!
English:
I've got problems in updating my CC Desktop App. After it doesn't function, i wanted to reinstall the application. But everytime I tried the folloging error message was on the screen.
The following error occurred - installer error when accessing an important file or directory. Try to repeat the installation. (Error code 49)
I just tried it with
deleting the opm.db file
the adobe CC cleaner tool
deinstalling my anti-malware-tool
nothing helped. Has anyone a tip what i can do? Please help me!

1.
2.
3. No Installation was made and so no installation-Logfile could found. The last one was at 21.06.2014
just a opm.db file was found. I cannot open it . The last words are just...
REATE TABLE opm_meta ( key varchar(25), value TEXT, constraint pk PRIMARY KEY (key) )
indexsqlite_autoindex_opm_meta_1opm_meta
was this a little helpful for you?

Problems with a c++ code on a linux pc translate into java windows pc

Hello does anyone know how I can use this c++ code in my java program.
This is a c++ code what we use on a linux pc now I have to make the code
for a windows pc with java.
void GetLocalIP(int s,struct sockaddr_in *local)
   struct ifconf cfg;          // info structure to request our IP addr
   struct ifreq ifs[3];       // part 2 of info structure
   int done=0;
   int x=0,l;
   // Get local ip addr, make information struct
   cfg.ifc_len = sizeof(ifs);
   cfg.ifc_req = ifs;
   // ioctl interface informatoin into the struct we made
   if (ioctl(s, SIOCGIFCONF, (void*)&cfg) == 0)
       l = cfg.ifc_len / sizeof(struct ifreq);
       while (!done && (x<l))
         if (strcmp("eth0",cfg.ifc_req[x].ifr_name)==0)
           memcpy(local,&(cfg.ifc_req[x].ifr_addr),sizeof(struct sockaddr_in));
           done=1;
         x++;
}

How do you want to "make the code for a windows pc with java" ?
Java can use sockets directly, and you can get the Local IP address by this code..
regards,
Owen
import java.net.*;
public class testnet
    public static void main(String[] args)
        try
            InetAddress local = InetAddress.getLocalHost();
            System.out.println ("Local Host Name : " + local.getHostName() );
            byte[] ip = local.getAddress();
            // Now do a bit of conversion to print the IP address from a byte array
            System.out.print ("Local Host IP   : " );
            int toUnsignedInt;
            for ( int i=0; i<ip.length; i++ )
                if (i>0)
                    System.out.print ( "." );
                toUnsignedInt = (int)ip& 0xFF;
System.out.print ( Integer.toString( toUnsignedInt ) );
System.out.println();
catch ( Exception dooohhh )
dooohhh.printStackTrace();
System.exit(0);

UTF-16 and SQL 2005. Any problems with surrogate pair code points?

Do nvarchar and nchars in SQL2005 offer full UTF-16 support?
As far as I can tell two nchars are necessary to store a full 32 bit surrogate pair UTF-16 code point. Everyone happy with that?
Provided that all my nchars(x) and nvarchars(x) have sufficient size (x is big enough), should I expect any problems using the full range of UTF-16 characters?

You can find more info here:
http://blogs.msdn.com/michkap/archive/2006/06/05/617896.aspx
and
http://msdn.microsoft.com/en-us/library/bb330962.aspx
http://blogs.msdn.com/qingsongyao/archive/2008/08/11/why-should-we-bother-about-surrogate-characer.aspx

Problem with france commodity code length.

Similar Messages

Maybe you are looking for