Problem with Gnome3 and/or graphics card Nvidia 8600M GT

Feb 22 07:40:21 localhost dbus[712]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Feb 22 07:50:30 localhost kernel: [ 679.031379] gnome-shell[1277]: segfault at 10 ip 00007f3bbd305c0f sp 00007f3b84ff86d8 error 6 in libnvidia-tls.so.295.20[7f3bbd305000+3000]
Feb 22 07:50:31 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost kernel: [ 683.420948] gnome-shell[1300]: segfault at 10 ip 00007f43bc84dc0f sp 00007f43877fd6d8 error 6 in libnvidia-tls.so.295.20[7f43bc84d000+3000]
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Feb 22 06:52:39 localhost rtkit-daemon[1004]: Successfully made thread 1420 of process 1420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 22 07:52:39 localhost goa[1441]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Feb 22 07:58:22 localhost kernel: [ 1150.316794] CE: hpet increased min_delta_ns to 20113 nsec
Hi,
Here is my /var/log/messages.log output.
Since several days my computer repeatedly restarts programs that require at least a bit memory, such as firefox ('segmentation fault'), skype, virtualbox, generaly gnome 3 environment. Sometimes it happens that the system hangs and I can't do nothing, although I can hear that hard disk is working - at that moment only hard reset helps.
I know that the Dell Inspiron laptops (1720) have problems with Nvidia 8600M GT (the cold solder). Is it like that this time? Or maybe something wrong with the memory, CPU (Core Duo) cache memory?
I will be happy to add any additional information.
Regards,
Lukasz

Did you update the nividia driver recently?
there are some threads on this

Similar Messages

  • I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

    I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
    After five days of testing in the service they can not  found fault and it was decided to change the graphics card.
    New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
    Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

    You could look at the System Profile for the info it presents for the card.  But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
    What program are you trying to run?  Is there anything in the system log? 
    I think it's the program that's having the problem and not anything with your video software.

  • Problems with BIOS for new graphics card!!! HEEELP!!!!

    Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened.  I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
    PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

    As stated before, and as a refresher. I just got off the line with MSI and EVGA.  What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg):  The 750Ti NF has a switch for Legacy/UEFI.  All others in the 700 series are UEFI.  The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy. 

  • Sudden problem between iMovie and my Graphics Card?

    Hello all-
    Please forgive any omissions, first time posting.
    I'm running Tiger 10.4.9 on a G4 iMac Desktop, 800 MHz w 768 MBram.
    My graphics info is apparently: NVIDIA GeForce2 MX:
    I only recently had iMovie HD 6.0.3 start displaying an alert message detailing it's requirement of a 'Quartz Extreme Compatible' graphics card. This is news to me, since I've been using this version of iMovie since October 06 without this alert cropping up. So this seems Out Of The Blue.
    Funny thing: I've booted the computer from the Tiger startup disk a couple of times since this error began - to check if a disk repair is needed - and with each assisted reboot the graphics card is correctly recognized/supported... once. One unassisted boot. After which it reverts to 'Quartz Extreme Compatible' unsupported once again.
    I swung the problem briefly past a genius at a MacGenius bar, who felt the problem was probably not the card itself going bad, (as she thought the card would fail entirely if it was having problems) but either corrupted software in the system, or a HardDrive problem. I have no other evidence that my HD might be failing, so I'm left with her other advice, to do an Archive and Install.
    Honestly, nothing's been installed or updated recently. If I had to guess, it
    -may- have started after Quicktime failed to play an .avi file off CD this week, but I can't be sure, as I hadn't tried HD for a little while before then. Could QT bombing out have corrupted a system file?
    Would you also suggest an Archive and Install? And what sort of system clean-up can I expect after such a procedure? Is there a less radical fix?
    Thanks for any thoughts,
    Andrew
    Minneapolis
    iMac G4 Desktop   Mac OS X (10.4.9)   Graphics : NVIDIA GeForce2 MX:

    Hi Folks,
    I am running a G-4, 1.25 Gz, 2 gigs ram, running 10.4.9, and a Radeon 9800 pro graphics card. I am having the same problems. I have tried the solutions mentioned here and still have the same problem. I have tried saving the iMovie to to my desk top, run permisions. The Graphics/Dispalys in system profile says
    ATI Radeon 9800 Pro:
    Chipset Model: ATY,R350
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4e48
    Revision ID: 0x0000
    ROM Revision: 113-A07525-130
    Displays:
    CPD-E540:
    Resolution: 1344 x 1008 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    So what is the solution...Do I have to retrograde back to iMovie 5?

  • Problem with the ATI 200M graphics card in a Satellite A110-334

    The computer is used both for office and home use (playing games, music etc)
    Only one problem after 6 months of use, but I can't get around it.
    When I start up Quake 3 all is well I can play for let's say 10-20 mins.
    After that I get a Blue Screen of Death saying that there was some memory error connected with the graphic card.
    Windows "tells me" to change the video card (it's not something i can do with a laptop ;) ) or to contact the hardware producer to change the bios because something could be wrong.
    Well only think I could do on my own was to change the drivers (I found some compatible with my card) but that didn't help. I also tried to change the amount of onboard memory used by the card (It uses x amount of available RAM), but to no avail

    Hi,
    which drivers youre using?
    Did you checked already these drivers out:
    http://www.omegadrivers.net/
    Maybe it helps. Otherwise you should send your machine to an authorized service partner for a hardware checkup since your machine is still in warranty and it wont cost you anything.
    Heres a link to find the nearest ASP in your country:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    Regards

  • Problem with recognising radeon 6490M graphics card on Pavilion dv6-6176sa

    So,
    My laptop was having some issues recently with the graphics, it basically wouldn't recognise either the intel or the radeon graphics card. I tried updating all drivers under the sun but nothing worked. In the end I formatted my computer and reinstalled windows, did all necessary updates windows and HP ones. Now my laptop would recognise both the intel and radeon in device manager but my computer was constantly using the intel card, I read up a bit and figured this would be due to an issue with the switchable graphics.
    I did the bios and drivers updates and changed switchable graphics to fixed mode, this seemed to do the trick and my laptop ran like it should be for a few days. This morning I start watching some of my shows and then my screen freezes and it starts making a bunch of noise (similar to what it was doing pre-factory reset). Oh dear, I turn it off, and leave it off for a bit figuring maybe it had overheated. I turn it on again, now device manager wont show the radeon card and AMD catalyst produces a warning message saying that there is no AMD driver compatible with the CCC (well it was just fine yesterday, no updates, program installations or anything run since then)
    I'm now wondering whether there may just be a hardware issue and that it's time to pack in my laptop or if this could still be a driver issue.

    @Piids 
    Download and install the most current AMD graphics softpaq.
    You can get it from the download section of your notebook's web support portal.
    Do not install the Intel graphics driver softpaq seperately. Doing that will remove the switchable graphics feature.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Problem with NEO2 and sata controller card

    1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
    and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
    2.BIOS version: The newest one, 1C0 or something.
    3.External VGA Type: Geforce 6800 GT
    4.CPU Type: AMD 64 3500+
    5.Memory Type: G Skill ZX 2048mb.
    6.Power Supply Type:
    7.Operating System: Xp Pro
    8.Problem Description:
    Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
    I wrote
    "Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
    It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
    I would be very thankful if you could help me with this problem.
    //Martin

    I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
    Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
    Quote:
     have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
    I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
    I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
    I think this card do not properly support HDD above 120G.
    Please respond to: [email protected]
    http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
    Btw: you have xp sp2 ?
    48bitLBA is not enabled in the first version.
    http://www.48bitlba.com/winxp.htm
    Edit:
    Here's another with complete different setup and same problems
    http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
    I doubt it has anything to do with your motherboard and/or bios.
    Btw: I looked at innovision and their drivers in download area are very old.
    Get the latest SIL3112 drivers for XP here:
    http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
    And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
    Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
    without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
    so having command queing set ON will cause major conflicts in data transfers.

  • Problem with KTV3 and PCI USB card extension from QTEC type 13068

    Hello all,
    I have been trying to make work a PCI USB card extension from QTEC type 13068. This card allows to give 4 USB  ports more.
    My problem is that oinly 2 ports are working and WINXP SP1 is saying that there are not enough ressources for all the PCI functions. However there is enough free IRQ. Even using this card alone on the mainboard give the same error.
    I am using a KTV3 (MS-6712 VER:1.0A) and I have no idear why this is happening. Could it be a bad interaction between the BIOS and the card?  wall Or WIN XP? angryfire
    All comments and ideas to try are welcome especially from those who have this QTEC card.
    Regards.

    What operating system are you using?  The card requires SP1 for XP and SP4 for 2000.  If you have these, try to uninstal the cardl and let Windows reinstall the card on start-up.

  • [SOLVED] Problem with Networkmanager and two WiFi cards

    I have two WiFi cards, one onboard my laptop, one USB. I use the USB one since gets a stronger signal, but the other one tries to connect.
    Is there a way of stoping that.
    I don't want to cancel the possibility of using it, just when I plug the USB antenna.
    Thank you
    Last edited by Frezeeer (2013-02-10 20:41:24)

    progandy wrote:Is there an entry for your onboard wifi in rfkill? Then block it when pluggin in the usb stick and unblock it lateron.
    Thanks for the reply.
    This is what I get:
    $ rfkill list
    0: samsung-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    1: samsung-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
    2: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    3: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
    4: phy1: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    If I try to "block" either number 2 or number 4. The WiFi disconects. It's as if they were the same card.
    Any ideas?
    Once again thank you

  • I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

    I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

    The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

    Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M?
    I do not see this card listed on the Adobe products page http://kb2.adobe.com/cps/873/cpsid_87347.html but am hoping someone who is more computer savy at Adobe or Nvidia or somewhere else can advise me.
    I'm looking to purchase a laptop with the subject graphics card.
    Rob

    >Will CS5.5
    http://forums.adobe.com/community/premiere/premierepro_current
    See link in my answer yesterday... also...
    For a list of supported nVidia CUDA cards go to the FAQ
    First read http://forums.adobe.com/thread/773101
    PPro Video FAQ http://www.video2brain.com/en/products-118.htm
    http://forums.adobe.com/community/premiere/premierepro_current/cs5_faq_sheet
    Quadro cards compared http://forums.adobe.com/thread/910140

  • Problem with HD6630M and catalyst on custom kernel

    My laptop is a sony vaio sa with hd6630m and intel graphics as a hybrid graphics setup. i m using linux-sony from aur.
    This is what i ve done so far:
    i have followed the instructions in the catalyst wiki in order to install catalyst for custom kernel, with catalyst-hook
    but after installing, aticonfig --initial -f throws no supported adapters detected. i m sure that my adapter is supported by the latest driver as some guys have successully made the setup.
    i' ve read every thread i could find in google about my issue but i didn't make a progress although other have made it!
    Things i tried:
    - installing the .run package from ati manually
    - reinstalling xorg and make a xorg.conf by my own (Xorg -configure does not work either)
    - installing catalyst in default latest kernel
    - i have not tried any other distro lately to see if i could make it work.
    - the open drivers also do not work with my setup, i can only have intel card and blacklisting radeon. (vgaswitcheroo does not work either)
    - many others i cannot recall
    The two cards show up in lspci so it isnt a hardware problem
    has anyone idea whats might going on or what i m doing wrong?

    Hello All
    I find out the solution myself !!!! Phew!!
    In order to create a french page couple of things need to be done
    1)In the configuration manager > display tab > chnage the language the to french
    2) Log in to Application designer and create the same component and page that was created in English. You may not have to create the page from scratch since you would first create it in base language english and hence when you log in as french you will have the page but it will be distorted so it will be rearranged.
    3) Any text that is there on the page will have to be rewritten in french if its is static text or else if it is being called from a message catalog it needs to be first written in English(this writes to PSMSGCATDEFN). Now go to PeopleTools>Translation>Translate System Definitions>Messages.
    And create the french transaltion.For more details on hopw to create new language specific message read peoplebooks(type Translating Messages in the search of peoplebooks).
    The language sepecific messages are written to PSMSGCATLANG table.
    Now when you log in to peoplesoft as french you will see all you custom pages in french.
    Have fun creating any global pages

  • How and where graphic card increase performance

    Hi,
    Im Premiere Pro cs 5 user and not acomputer gig, buying laptop at the moment.
    Im between laptops with this specyfication:
    processor: i7-3630QM (2.4 GHz, 3.4 GHz Turbo, 6 MB Cache)     
    graphic card:nVidia Quadro K3000M
    RAM  16 GB
    SSD  128 GB
    and the one with worse graphic card:
    processor: i7-4702MQ (2.2 GHz, 3.2 GHz Turbo, 6 MB Cache)
    graphic card: NVIDIA GeForce GT 750M 
    RAM:  16 GB
    SSD: 128 GB
    I would like to know how performance increase with better graphic card, in what situations/actions? - is it more during rendering or editing? I would like to buy cheaper laptop and Im wondering if the editing process would be acceptable? not slowing down terribly, I use footage from Canon 5D Mark II mostly
    Hope my question is clear. Thank you for any help.
    Monika

    The performance difference is seen both on the timeline and when exporting. However the Timeline performance obviously effects the user experience more. The 2nd laptop 4702MQ is Haswell and I would suggest that over the Ivy unit. The GPU performance difference wont cover the difference between the Haswell and Ivy chips. Haswell is definitely the better way to go.
    Eric
    ADK

  • Is there any way to upgrade the processor speed and/or graphics card?

    i would like to upgrade the processor and/or graphics card to make gameplay faster, having problems with speed when having game open and web browser at the same time on two screens.

    is there a way to upgrade the ram on the mac mini (with disk drive) so 2009 ish, that would greatly help me?  Aside from the obvious "buy a new one".

  • MSI mobos and ATI graphics card incompability!

    I don´t know how well known this problem is but I´ve seen it on this forum and when googling the internet you can find it!
    The issue is that I can´t get my HD5450(Sapphire) to work on my MS-7267 (945GCM5-F V2) mobo! The screen stays blank but the PC boots up and loads Windows.
    The HD5450 works fine on other mobos with different PSU´s ranging from 350 - 600 watts, but when trying different PSU´s on the 945GCM5-F V2 it doesn´t seem to help. I´ve also tried different bios settings, I´ve cleared CMOS, I´ve tried both dvi and vga outputs, I´ve disconnected as much as possible from the mobo except from the graphics card and the PSU, but nothing seems to help!
    Any ideas , someone?
    Tekrar!

    Thanks for all replies!
    I had this question on the AMD forum (AMD Game » AMD Technology » Radeon Graphics » MSI mobos and ATI graphics card incompability!) and here are some of the replies:
    "Well, its a known issue that older chipsets, like even AMD 580X chipset, doesn't work with 5k/6k series cards without a bios update from the manufacturer of the board.
    If its not working / posting / no video ect... You need to bug MSI to update the bios on the board to support the newer 5k/6k video cards. It may or may not happen. Several manufacturers have like Asus, and Gigabyte."
    "Same problem. 5450, MSI MS-7267 (945GCM5-F V2). Done the same plus updated msi mainboard bios using msi live update 5 etc. Waiting for reply from makers of graphics card and mainboard.
    I should add from what I've read in other threads and forums it seems to be an old mainboard problem not just related to the MSI 945GCM5-F V2. Some other manufacturers of mainboards have sent customers bios upgrades to get their cards working.
    As for your pci express version question. Well these problems seem to emerge when people have plugged these pci express version 2.1 cards into their pci express 1st generation slots. What exactly the problem is here? Leave that for manufacturers/experts to answer."
    "Tek , its hit or miss on the board + chipset combination on if the card will work or not. Sometimes they will work in old boards, Sometimes they will not w/o manufacturerer support.
    Its completely random from what I've seen on the forums at the times they were released , when people with old boards were asking why it wasn't working. And what they did to solve it. Most all of them emailed the manufacturer. Some of those said manufactureres provided beta bios back to the customers, some said your out of luck."
    Its true, this MSI MS-7267 (945GCM5-F V2) isn´t a new mobo, but when I get the 5450 to work without problem with an even older fujitsu mobo (last bios update long time ago) and a 350 watts PSU I think something´s wrong.
    So, a bios upgrade would probably fix it if the manufacturer (in this case MSI) just wanted to!
    Tekrar!

Maybe you are looking for

  • Question on optimum choice of index - whether to use CTXCAT or CONTEXT

    Hi , I have a situation in which there are short texts that are to be searched for diacritical characters and for that I implemented CTXCAT type of index. The solution works fine except for left side wild card search - in that case I have suggested t

  • How do i set up multiple but separate libraries?

    i'm starting a live-broadcast, music radio show.  i manage my music library (master library) on a win8 computer with 9000+ mp3 files.  i use media player for that process.  at the radio station i will run the show on the air from an apple system usin

  • Read from 2 tables, write only to one. Simple, but impossible??

    I've been messing about with various annotations for quite a while now, and I can't seem to figure out how to accomplish this seemingly simple task. I'm hoping somebody could explain to me the probably very obvious and simple mistake that I am making

  • Filling out Pdf form

    How do i fill out PDF forms? I have an android HTC Evo Design ...

  • Avoid out.println inside servlet

    Is there a nice way to avoid hardcoding of HTML tag inside the servlet? I know it can be done by XML and XSL, but it is hard !! Is there any example i can look at to start? Is there any other way to do that? I want to separate the logic from the styl