Problem with H and Option key on a macbook keyboard

I have a problem with my macbook keyboard, any time i tried to use the "h" or "option" keys i get the TM symbol.
All other keys works perfect
i don't know what happend?
Thanks

To access NTFS Windows from your MAC OS via Bootcamp, use this software:
http://www.paragon-software.com/home/ntfs-mac/
To access Mac from your Windows via Bootcamp, use this software:
http://www.mediafour.com/products/macdrive/bootcamp/

Similar Messages

Problems with browsers and 'w' key since updates

Hi
I ran 'pacman -Syu' a little over a week ago, and since then I've been experiencing two rather odd problems.
1.
Using any web-browser (firefox, epiphany, songbird, etc), visiting pages that make use of javascript (i -think- that's the cause) makes the browser stop responding for 10-20 seconds. It goes grey and everything. And then eventually it starts working again. This occurs on many websites such as Facebook, Woot.com, to name a few big ones. It's really starting to drive me nuts.
2.
This problem's much weirder. After starting my computer, the w key is very unresponsive. By that I mean for a 'w' keystroke to register I need to hold down the 'w' key for 1 or 2 seconds, after which it will finally work. At first I thought this was a problem with my keyboard, but as the computer remains on, the problem slowly disappears - after about 30 minutes, the 'w' key works as expected. I don't think this is an X/GNOME problem, as I experience the same problems in the TTYs.
I have a Sony Vaio FE-890:
oliver@helios:~$ uname -a
Linux helios 2.6.28-ARCH #1 SMP PREEMPT Fri Feb 13 11:03:55 CET 2009 x86_64 Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
I've been updating frequently in the interim hoping the problems will go away, but so far no luck. Any thoughts?

Hi
Thanks for your suggestions.
Also, flash doesn't work on webpages anymore. I'm assuming this is some problem with the nspluginwrapper thing...
Here's pacman.log of the fateful upgrade:
[2009-02-10 10:32] synchronizing package lists
[2009-02-10 10:32] starting full system upgrade
[2009-02-10 11:37] synchronizing package lists
[2009-02-10 11:38] starting full system upgrade
[2009-02-10 13:10] removed gnome-network-manager (0.6.5-1)
[2009-02-10 13:10] upgraded tzdata (2008i-1 -> 2009a-1)
[2009-02-10 13:10] Generating locales...
[2009-02-10 13:10] en_US.UTF-8... done
[2009-02-10 13:10] en_US.ISO-8859-1... done
[2009-02-10 13:10] Generation complete.
[2009-02-10 13:10] upgraded glibc (2.9-2 -> 2.9-4)
[2009-02-10 13:10] upgraded readline (5.2.013-1 -> 5.2.013-2)
[2009-02-10 13:10] upgraded bash (3.2.048-1 -> 3.2.048-3)
[2009-02-10 13:10] upgraded dhcpcd (4.0.7-1 -> 4.0.10-1)
[2009-02-10 13:10] upgraded pm-utils (1.2.3-3 -> 1.2.3-4)
[2009-02-10 13:10] upgraded hal (0.5.11-4 -> 0.5.11-7)
[2009-02-10 13:10] upgraded libnetworkmanager (0.6.6-1 -> 0.7.0-1)
[2009-02-10 13:10] upgraded networkmanager (0.6.6-1 -> 0.7.0-1)
[2009-02-10 13:10] installed network-manager-applet (0.7.0-1)
[2009-02-10 13:10] upgraded aircrack-ng (1.0_rc1-1 -> 1.0_rc2-1)
[2009-02-10 13:10] upgraded gcc-libs (4.3.2-2 -> 4.3.3-1)
[2009-02-10 13:10] upgraded xcb-proto (1.2-2 -> 1.3-1)
[2009-02-10 13:10] upgraded libxcb (1.1.90.1-1 -> 1.1.93-1)
[2009-02-10 13:10] upgraded libx11 (1.1.5-2 -> 1.1.99.2-1)
[2009-02-10 13:10] upgraded amsn (0.97.2-4 -> 0.97.2-8)
[2009-02-10 13:10] ATTENTION DB PACKAGE:
[2009-02-10 13:10] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
[2009-02-10 13:10] upgraded db (4.7.25-1 -> 4.7.25-2)
[2009-02-10 13:10] upgraded apache (2.2.11-1 -> 2.2.11-2)
[2009-02-10 13:10] upgraded libvorbis (1.2.0-1 -> 1.2.1rc1-1)
[2009-02-10 13:10] upgraded avidemux (2.4.3-2 -> 2.4.4-1)
[2009-02-10 13:10] upgraded texinfo (4.13a-1 -> 4.13a-3)
[2009-02-10 13:10] upgraded binutils (2.19-1 -> 2.19.1-1)
[2009-02-10 13:10] upgraded boost (1.36.0-2 -> 1.37.0-1)
[2009-02-10 13:10] upgraded brasero (0.9.0-1 -> 0.9.1-1)
[2009-02-10 13:10] upgraded curl (7.19.2-1 -> 7.19.3-1)
[2009-02-10 13:10] upgraded pycairo (1.8.0-2 -> 1.8.2-1)
[2009-02-10 13:10] upgraded pygtk (2.13.0-2 -> 2.14.0-1)
[2009-02-10 13:10] upgraded deluge (1.1.0-1 -> 1.1.2-1)
[2009-02-10 13:10] upgraded device-mapper (1.02.29-1 -> 1.02.30-1)
[2009-02-10 13:10] upgraded ed (1.1-2 -> 1.2-1)
[2009-02-10 13:10] upgraded eigen (1.0.5-1 -> 2.0.0-1)
[2009-02-10 13:10] upgraded fakeroot (1.11.4-1 -> 1.12.1-1)
[2009-02-10 13:10] upgraded file (4.26-1 -> 5.00-1)
[2009-02-10 13:10] upgraded gcc (4.3.2-2 -> 4.3.3-1)
[2009-02-10 13:10] upgraded libtasn1 (1.7-1 -> 1.8-1)
[2009-02-10 13:10] upgraded gnutls (2.6.3-1 -> 2.6.4-1)
[2009-02-10 13:10] upgraded inputproto (1.4.4-1 -> 1.5.0-1)
[2009-02-10 13:10] upgraded xextproto (7.0.4-1 -> 7.0.5-1)
[2009-02-10 13:10] upgraded libxext (1.0.4-1 -> 1.0.5-1)
[2009-02-10 13:10] upgraded ghostscript (8.63-4 -> 8.64-1)
[2009-02-10 13:10] upgraded hwdetect (2008.12-4 -> 2009.01-1)
[2009-02-10 13:10] upgraded imagemagick (6.4.8.2-1 -> 6.4.9.2-1)
[2009-02-10 13:10] upgraded inetutils (1.6-2 -> 1.6-3)
[2009-02-10 13:10] warning: /etc/inittab installed as /etc/inittab.pacnew
[2009-02-10 13:10] upgraded initscripts (2008.09-2 -> 2009.01-1)
[2009-02-10 13:11] update desktop mime database ...
[2009-02-10 13:11] upgraded inkscape (0.46-9 -> 0.46-10)
[2009-02-10 13:11] upgraded mkinitcpio (0.5.21-1 -> 0.5.23-1)
[2009-02-10 13:11] >>>
[2009-02-10 13:11] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
[2009-02-10 13:11] >>>
[2009-02-10 13:11] >>> Updating module dependencies. Please wait ...
[2009-02-10 13:11] >>> MKINITCPIO SETUP
[2009-02-10 13:11] >>> ----------------
[2009-02-10 13:11] >>> If you use LVM2, Encrypted root or software RAID,
[2009-02-10 13:11] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-02-10 13:11] >>> More information about mkinitcpio setup can be found here:
[2009-02-10 13:11] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-02-10 13:11]
[2009-02-10 13:11] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-02-10 13:11] ==> Building image "default"
[2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-02-10 13:11] :: Begin dry run
[2009-02-10 13:11] :: Parsing hook [base]
[2009-02-10 13:11] :: Parsing hook [udev]
[2009-02-10 13:11] :: Parsing hook [autodetect]
[2009-02-10 13:11] :: Parsing hook [pata]
[2009-02-10 13:11] :: Parsing hook [scsi]
[2009-02-10 13:11] :: Parsing hook [sata]
[2009-02-10 13:11] :: Parsing hook [usb]
[2009-02-10 13:11] :: Parsing hook [keymap]
[2009-02-10 13:11] :: Parsing hook [filesystems]
[2009-02-10 13:11] :: Generating module dependencies
[2009-02-10 13:11] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-02-10 13:11] ==> SUCCESS
[2009-02-10 13:11] ==> Building image "fallback"
[2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-02-10 13:11] :: Begin dry run
[2009-02-10 13:11] :: Parsing hook [base]
[2009-02-10 13:11] :: Parsing hook [udev]
[2009-02-10 13:11] :: Parsing hook [pata]
[2009-02-10 13:11] :: Parsing hook [scsi]
[2009-02-10 13:11] :: Parsing hook [sata]
[2009-02-10 13:11] :: Parsing hook [usb]
[2009-02-10 13:12] :: Parsing hook [keymap]
[2009-02-10 13:12] :: Parsing hook [filesystems]
[2009-02-10 13:12] :: Generating module dependencies
[2009-02-10 13:12] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-02-10 13:12] ==> SUCCESS
[2009-02-10 13:12] upgraded kernel26 (2.6.28.1-1 -> 2.6.28.4-1)
[2009-02-10 13:12] upgraded lib32-freetype2 (2.3.7-1 -> 2.3.8-1)
[2009-02-10 13:12] upgraded lib32-gcc-libs (4.3.2-1 -> 4.3.3-1)
[2009-02-10 13:12] upgraded lib32-gtk2 (2.14.6-1 -> 2.14.7-1)
[2009-02-10 13:12] upgraded lib32-readline (5.2-8 -> 5.2.013-1)
[2009-02-10 13:12] upgraded libice (1.0.4-1 -> 1.0.5-1)
[2009-02-10 13:12] upgraded libmikmod (3.1.12-1 -> 3.1.12-2)
[2009-02-10 13:12] upgraded libnova (0.12.2-1 -> 0.12.3-1)
[2009-02-10 13:12] upgraded libsndfile (1.0.17-2 -> 1.0.18-1)
[2009-02-10 13:12] upgraded libsamplerate (0.1.4-1 -> 0.1.6-1)
[2009-02-10 13:12] upgraded libxi (1.1.4-1 -> 1.2.0-1)
[2009-02-10 13:12] upgraded lvm2 (2.02.43-1 -> 2.02.44-1)
[2009-02-10 13:12] upgraded man-pages (3.16-1 -> 3.17-1)
[2009-02-10 13:12] upgraded mlocate (0.21-1 -> 0.21.1-1)
[2009-02-10 13:12] upgraded opal (3.4.4-2 -> 3.4.4-2.1)
[2009-02-10 13:12] * relogin or source /etc/profile.d/openoffice.sh
[2009-02-10 13:12] * see http://wiki.archlinux.org/index.php/Openoffice
[2009-02-10 13:12] how to use extensions, e.g. for spell checking
[2009-02-10 13:12] see /opt/openoffice/share/extension/install what
[2009-02-10 13:12] is shipped with this package
[2009-02-10 13:12] upgraded openoffice-base (3.0.0-4 -> 3.0.1-1)
[2009-02-10 13:12] upgraded patch (2.5.9-1 -> 2.5.9-2)
[2009-02-10 13:12] upgraded php (5.2.7-2 -> 5.2.8-1)
[2009-02-10 13:13] upgraded pidgin (2.5.3-1 -> 2.5.4-1)
[2009-02-10 13:13] upgraded pixman (0.12.0-1 -> 0.14.0-1)
[2009-02-10 13:13] upgraded pycups (1.9.42-2 -> 1.9.45-1)
[2009-02-10 13:13] upgraded qt (4.4.3-4 -> 4.4.3-5)
[2009-02-10 13:13] upgraded reiserfsprogs (3.6.20-3 -> 3.6.21-1)
[2009-02-10 13:13] upgraded sdparm (1.03-1 -> 1.03-2)
[2009-02-10 13:13] upgraded smpeg (0.4.4-4 -> 0.4.4-5)
[2009-02-10 13:13] upgraded sound-theme-freedesktop (0.1-1 -> 0.2-1)
[2009-02-10 13:13] upgraded syslog-ng (2.0.9-1 -> 2.1.3-2)
[2009-02-10 13:13] upgraded system-config-printer (1.1.1-1 -> 1.1.3-1)
[2009-02-10 13:13] extracting fonts... done.
[2009-02-10 13:13] rebuilding font cache... done.
[2009-02-10 13:13] upgraded ttf-ms-fonts (2.0-1 -> 2.0-2)
[2009-02-10 13:13] upgraded unrar (3.8.5-1 -> 3.8.5-2)
[2009-02-10 13:13] upgraded vlc (0.9.8a-4 -> 0.9.8a-5)
[2009-02-10 13:13] upgraded wireshark (1.0.5-1 -> 1.0.6-1)
[2009-02-10 13:13] upgraded xcb-util (0.3.2-1 -> 0.3.3-1)
[2009-02-10 13:13] upgraded xf86-input-evdev (2.1.0-1 -> 2.1.2-1)
[2009-02-10 13:13] upgraded xf86-input-keyboard (1.3.1-1 -> 1.3.2-1)
[2009-02-10 13:13] upgraded xf86-input-synaptics (0.99.3-1 -> 1.0.0-1)
[2009-02-10 13:13] upgraded xine-lib (1.1.16.1-1 -> 1.1.16.1-2)
[2009-02-10 13:13] upgraded xkeyboard-config (1.4-2 -> 1.5-1)
[2009-02-10 13:13] upgraded xorg-xinit (1.1.0-1 -> 1.1.1-1)
[2009-02-10 13:13] upgraded xterm (239-1 -> 241-1)
[2009-02-10 15:15] synchronizing package lists
[2009-02-10 15:16] starting full system upgrade
[2009-02-10 15:17] ==> to use yaourt as user,add these entries to /etc/sudoers:
[2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacman
[2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacdiffviewer
[2009-02-10 15:17] (Please, use sudo very carefully)
[2009-02-10 15:17] ==> for a full colorized output, install pacman-color and set PacmanBin in /etc/yaourtrc
[2009-02-10 15:17] upgraded yaourt (0.9.1-1 -> 0.9.2.4-1)
[2009-02-10 15:18] synchronizing package lists
[2009-02-10 15:19] starting full system upgrade
[2009-02-10 15:24] upgraded bin32-wine (1.1.10-1 -> 1.1.14-1)
[2009-02-10 15:24] Reading package info from stdin ... done.
[2009-02-10 15:24] Writing new package config file... done.
[2009-02-10 15:24] upgraded haskell-sdl (0.5.4-1 -> 0.5.5-1)
[2009-02-10 15:24] Reading package info from stdin ... done.
[2009-02-10 15:24] Writing new package config file... done.
[2009-02-10 15:24] upgraded haskell-sdl-ttf (0.5.2-1 -> 0.5.5-1)
[2009-02-10 15:25] "nspluginwrapper -r $HOME/.mozilla/plugins/* ; nspluginwrapper -v -a -i" to recreate plugins after update
[2009-02-10 15:25] Konqueror users need to add $HOME/.mozilla/plugins/ to konqueror plugins path
[2009-02-10 15:25] upgraded nspluginwrapper (1.0.0-1 -> 1.2.2-1)
[2009-02-10 15:25] installed lib32-curl (7.19.3-1)
[2009-02-10 15:25] installed lib32-nspr (4.7.3-1)
[2009-02-10 15:25] installed lib32-sqlite3 (3.6.10-1)
[2009-02-10 15:25] installed lib32-nss (3.12.2-1)
[2009-02-10 15:26] Run
[2009-02-10 15:26] nspluginwrapper -v -r ~/.mozilla/plugins/npwrapper.libflashplayer.so
[2009-02-10 15:26] nspluginwrapper -v -a -i
[2009-02-10 15:26] to upgrade the plugin
[2009-02-10 15:26] upgraded nspluginwrapper-flash (9.0.124.0-1 -> 10.0.15.3-3)

Problem with date and time syncing itouch to macbook

i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
please help!!!!

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

Problems with "v", "]", and command keys on the keyboard

Hi,
On my MacBook, pressing either the "v" key or the command key to the left of the space bar, without pressing the other one as in a keyboard shortcut, pastes what is currently on my clipboard. Pressing only the command key to the right of the space bar, and not the "]" key in combination, moves me forward in my web browser. When I do press the "]" key, nothing happens (I had to copy and paste the "]" and the "v" for this post). Obviously this is somewhat annoying as typing anything with these two symbols becomes a chore. I am still able to use other keyboard shortcuts, however, but in doing so the command key either pastes from the clipboard or, if I'm using a web browser, moves me to the next page in my history before completing the shortcut. How can I fix this? Thanks.

Try resetting your SMC.
Resetting the System Management Controller >>
Try resetting PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for four times.
6. Release the keys.
If neither help, you could have a hardware issue with the keyboard.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problem with foreign and primary keys migration from SQL Server to Oracle

Hi folks, i'm using SQL Developer to migrate from a SQL Server database to Oracle and i'm stuck with a couple issues:
The worst of them so far is the fact that i can't migrate any of the PKs and FKs. After successfully capturing the SQL Server DB model and converting it to Oracle, when the tool generates the scripts, all ALTER TABLE queries that add the PKs and FKs have their target columns duplicated.
for example: when i'm trying to migrate a simple table that contains an Id (PK) and Name columns, the tool generates the following scripts:
PROMPT Creating Table TestTable...
CREATE TABLE TestTable (
Id NUMBER(10,0) NOT NULL,
Name VARCHAR2 NOT NULL
PROMPT Creating Primary Key Constraint PK_TestTable on table TestTable ...
ALTER TABLE TestTable
ADD CONSTRAINT PK_TestTable PRIMARY KEY
Id,
Id
ENABLE
As for the FKs, the tool duplicates the columns as well:
ALTER TABLE SomeTable
ADD CONSTRAINT FK_SomeTable_SomeTable2 FOREIGN KEY
SomeTable2Id,
SomeTable2Id
REFERENCES SomeTable2
Id,
Id
ENABLE
Does anyone have a clue on how to solve these issues? I'd be greatly thankful for any answers!

Hi Fernando,
I was unable to replicate this issue. My primary / foreign keys where defined using unique columns.
PROMPT Creating Primary Key Constraint PK_Suppliers on table Suppliers ...
ALTER TABLE Suppliers
ADD CONSTRAINT PK_Suppliers PRIMARY KEY
SupplierID
ENABLE
I tried a few things like
capturing twice and renaming both models the same
renaming the converted models
but with no luck.
I think this issue is occuring either at the capture or convert phase.
1) Are you performing the capture online or offline?
2) Can you provide a the entire DDL for one of these tables and its indexes to see if I can replicate?
3) Did the capture or convert fail or have to be redone at any stage ?
I all else fails I would attempt a capture and convert again using a brand new repository (create a new schema in Oracle and associate the migration repository with it).
Regards,
Dermot
SQL Developer Team
Edited by: Dermot ONeill on Oct 22, 2009 12:18 PM

Problem With Home And End keys

Hi
I cleaned the keyboard of my ibook G4 about two days ago. The ibook was switched off at the time but now I can't seem to access the left (Home) and right (End) cursor keys (When pressed nothing happens).
The up (Pg Up) and down (Pg Dn) keys are working fine. I've obviously pressed a combination of keys that has resulted in turning off my Left and Right cursor keys. How on earth do I rectify what I've done. I've looked in my G4 manual but to no avail. If somebody can help me that would be terrific.
Many thanks
L.

zsh unfortunately doesn't read /etc/inputrc, which tells the shell what commands sent by the terminal emulator mean.
add the following to your .zshrc, and you should be fine.
# key bindings
bindkey "e[1~" beginning-of-line
bindkey "e[4~" end-of-line
bindkey "e[5~" beginning-of-history
bindkey "e[6~" end-of-history
bindkey "e[3~" delete-char
bindkey "e[2~" quoted-insert
bindkey "e[5C" forward-word
bindkey "eOc" emacs-forward-word
bindkey "e[5D" backward-word
bindkey "eOd" emacs-backward-word
bindkey "ee[C" forward-word
bindkey "ee[D" backward-word
bindkey "^H" backward-delete-word
# for rxvt
bindkey "e[8~" end-of-line
bindkey "e[7~" beginning-of-line
# for non RH/Debian xterm, can't hurt for RH/DEbian xterm
bindkey "eOH" beginning-of-line
bindkey "eOF" end-of-line
# for freebsd console
bindkey "e[H" beginning-of-line
bindkey "e[F" end-of-line
# completion in the middle of a line
bindkey '^i' expand-or-complete-prefix
by the way, i've changed some of the keys. for instance, ctrl-left and ctrl-right move back and forward by whole words. default is alt i believe.

Re: Equium P300-19O - Problem with mute and illumination keys

Up until this point i have had no complaints with my laptop having purchased it two years ago.
Above the keyboard next to the power button is the media touch pad that allows the illumination of parts of the laptop and pause/play button etc for media playback.
Two days ago i turned on my laptop and i noticed that these buttons no longer worked and even when the laptop was turned off and the power cables not inserted the lights stayed on.
I don't know what to do can anybody offer any suggestions or help??

thnks for all help guys managed to get it working again for some reason it seems to have started working again after i took the battery out and then rebooted it again so simple yet something i didnt think of doing in the first place.
Again thanks for all the help

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

Problem with overwrite and insert keyboard commands

I'm a new user, switching from FCP. I edited one project successfully with no trouble a couple of weeks ago. Now I'm in a second project and having a weird difficulty. Using a pretty new Mac 8 core tower.
The insert and overlay keyboard commands (comma and period keys) don't work. They still work in the old project but not this one. If I start a new sequence and copy my timeline to it, the commands will work for awhile but ONLY with video, not with the audio tracks. Drag and drop works fine but that really slows me down.
The clips I'm using are all the same format (H.264 from Canon 5DII and some still photos) as the first project. Only difference in this project is lots of chroma keying and some resizing of background still photos. Nothing unrendered.
I started a new project just now and imported the problem project into it, started a new sequence, copied old sequence, and I get the same problem. I can drop in video with a keyboard command but not audio. Earlier it was not even doing video. Yesterday when I'd start a new sequence and do the same thing, it would give me video on the keyboard command but then eventually that would stop and it would do nothing. At one point the cursor would move over the width of the clip, as if it had been dropped into the timeline, but then that stopped as well.
I've trashed preferences and that didn't work. I did that according to a procedure I found online. It said open up PP while holding down the Shift and Option keys. I did that twice. Nothing.
To summarize: Keyboard commands for overwrite and insert edit do not work in this project but do in an older project.
Any ideas?
Thanks.
Bill Pryor
[email protected]

Well, thanks to an email from another person who was having the same problem, it's all solved not.
Operator error. Dang. Who knew--in FCP you select a track by clicking on the V or A buttons to the far left. In Premiere Pro you have to make sure BOTH the far left button and the one to the right that says Video 1, Audio 1, etc. are also clicked. They BOTH have to be light gray. In my first project, everything was properly activated but in the next project apparently they were not and that carried over to succeeding projects (even though I didn't change anything...at least consciously).
So all as well now. No glitch, no bug. Just good ol' fashioned operator error. I will wear the dunce hat today.

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Problem with EAP and RADIUS

Hi *,
I have the following problem with RADIUS and EAP authentication.
Radius server sends an "Access-Accept" packet to my AP, but the station does not authenticate.
I've tried with different encryption configuration and with different authentication methods under "dot11 essid", but nothing changes...
What could it be?
Debug piece and configuration follows:
*Jan 25 14:23:34.795: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.795: RADIUS(00000012): sending*Jan 25 14:23:34.799: RADIUS:   4E 47 56 7A 78 65 4A 4F 55 31 47 40 77 6C 61 6E [NGVzxeJOU1G@wlan]*Jan 25 14:23:34.799: RADIUS:   2E 6D 6E 63 30 30 31 2E 6D 63 63 30 30 31 2E 33 [.mnc001.mcc001.3]*Jan 25 14:23:34.799: RADIUS:   67 70 70 6E 65 74 77 6F 72 6B 2E 6F 72 67        [gppnetwork.org]*Jan 25 14:23:34.799: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:34.799: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:34.799: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:34.799: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:34.811: RADIUS/DECODE: EAP-Message fragments, 20, total 20 bytes*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:34.831: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:34.831: RADIUS:   32                                               [2]*Jan 25 14:23:34.831: RADIUS(00000012): Config NAS IP: 192.168.173.2*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.835: RADIUS(00000012): sending*Jan 25 14:23:34.835: RADIUS:   10 01 00 01 07 05 00 00 D9 37 C3 D9 79 3E 33 EA [?????????7??y>3?]*Jan 25 14:23:34.835: RADIUS:   F3 7D 73 43 BF BA D0 6A                          [?}sC???j]*Jan 25 14:23:34.835: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:34.835: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:34.835: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:34.835: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.035: RADIUS: Received from id 1645/64 192.168.177.158:1812, Access-Challenge, len 304*Jan 25 14:23:35.039: RADIUS:   46 10 78 5F 5F B0 CB 6C 0B 05 00 00 DA C3 BF 28 [F?x__??l???????(]*Jan 25 14:23:35.039: RADIUS:   E0 18 2B 95 97 C2 0A D7 40 53 FE 62              [??+?????@S?b]*Jan 25 14:23:35.039: RADIUS(00000012): Received from id 1645/64*Jan 25 14:23:35.039: RADIUS/DECODE: EAP-Message fragments, 60+220, total 280 bytes*Jan 25 14:23:35.355: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:35.359: RADIUS:   92 DA 5E 26 CF 40 01 22 7A 8E F5 C1              [??^&?@?"z???]*Jan 25 14:23:35.359: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:35.359: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:35.359: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:35.359: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.367: RADIUS: Received from id 1645/65 192.168.177.158:1812, Access-Accept, len 30*Jan 25 14:23:35.367: RADIUS: authenticator 8C 2C 1B 97 82 BB 6C 7F - AA D3 4A AB CA 22 8B B7*Jan 25 14:23:35.367: RADIUS: EAP-Message         [79] 10 *Jan 25 14:23:35.367: RADIUS:   03 01 00 04 00 00 00 00                          [????????]*Jan 25 14:23:35.371: RADIUS(00000012): Received from id 1645/65*Jan 25 14:23:35.371: RADIUS/DECODE: EAP-Message fragments, 8, total 8 bytes*Jan 25 14:23:35.671: %DOT11-7-AUTH_FAILED: Station d023.dbb8.d6a9 Authentication failed
Config:
aaa new-model!aaa group server radius rad_eap server-private 192.168.177.158 auth-port 1812 acct-port 1813 key 7 044803071D2448!aaa authentication login eap_methods group rad_eapaaa authorization exec default if-authenticated aaa authorization network default if-authenticated !         aaa session-id commonip name-server 192.168.177.45!                dot11 ssid WifiEAP1   vlan 10   authentication open eap eap_methods    authentication shared eap eap_methods   authentication key-management wpa optional   guest-mode!         bridge irb!         interface Dot11Radio0 no ip address no ip route-cache !        encryption vlan 10 mode ciphers aes-ccm tkip wep128 !        broadcast-key vlan 10 change 300 !        ssid WifiEAP1 !        antenna gain 0 station-role root!         interface Dot11Radio0.10 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled!         interface GigabitEthernet0 ip address 192.168.173.3 255.255.255.0 no ip route-cache!         interface GigabitEthernet0.1 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled!         interface BVI1 ip address 192.168.173.2 255.255.255.0 no ip route-cache!ip radius source-interface BVI1 bridge 1 route ip
thanks so much!

Stefano: not sure if related but there is an unsupported attribute in the debugs:
Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr:
*Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41
*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface
Try to eliminate any configured attributes on radius except those in IETF radius. Then try again.
You may also chech by removing the shared eap as suggested above. Let us know if this works.
Sent from Cisco Technical Support iPad App

Problem with sqlldr and commit

Hi,
i have a problem with sqlldr and commit.
I have a simple table with one colum [ col_id number(6) not null ]. The column "col_id" is primary key in the table. I have one file with 100.000 records ( number from 0 to 99.999 ).
I want load the file in the table with sqlldr ( sql*loader ) but i want commit only if all records are loaded. If one record is discarded i want discarded all record of file.
The proble is that in coventional path the commit is on 64 row but if i want the same records of file isn't possible and in direct path sqlldr disable primary key :(
There are a solutions?
Thanks
I'm for the bad English

This is my table:
DROP TABLE TEST_SQLLOADER;
CREATE TABLE TEST_SQLLOADER
( COL_ID NUMBER NOT NULL,
CONSTRAINT TEST_SQLLOADER_PK PRIMARY KEY (COL_ID)
This is my ctlfile ( test_sql_loader.ctl )
OPTIONS
DIRECT=false
,DISCARDMAX=1
,ERRORS=0
,ROWS=100000
load data
infile './test_sql_loader.csv'
append
into table TEST_SQLLOADER
fields terminated by "," optionally enclosed by '"'
( col_id )
test_sql_loader.csv
0
1
2
3
99999
i run sqlloader
sqlldr xxx/yyy@orcl control=test_sql_loader.ctl log=test_sql_loader.log
output on the screen
Commit point reached - logical record count 92256
Commit point reached - logical record count 93248
Commit point reached - logical record count 94240
Commit point reached - logical record count 95232
Commit point reached - logical record count 96224
Commit point reached - logical record count 97216
Commit point reached - logical record count 98208
Commit point reached - logical record count 99200
Commit point reached - logical record count 100000
Logfile
SQL*Loader: Release 11.2.0.1.0 - Production on Sat Oct 3 14:50:17 2009
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Control File: test_sql_loader.ctl
Data File: ./test_sql_loader.csv
Bad File: test_sql_loader.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 0
Bind array: 100000 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table TEST_SQLLOADER, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
COL_ID FIRST * , O(") CHARACTER
value used for ROWS parameter changed from 100000 to 992
Table TEST_SQLLOADER:
100000 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255936 bytes(992 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 100000
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Sat Oct 03 14:50:17 2009
Run ended on Sat Oct 03 14:50:18 2009
Elapsed time was: 00:00:01.09
CPU time was: 00:00:00.06
The commit is on 992 row
if i have error on 993 record i have commit on first 992 row :(
Edited by: inter1908 on 3-ott-2009 15.00

Odd problems with vda -x option

I am using VDI 3.4.1, and have discovered that two simultaneous runs of vda with the '-x' option results in one of the runs ignoring that option. For example, try either of the following commands:
vda provider-show -x "provider" < /dev/null & vda provider-show -x "provider" < /dev/null &
vda pool-desktops -x "pool" < /dev/null & vda pool-desktops -x "pool" < /dev/null &
In both cases, the output from one of the vda runs will be as expected, but the other one will output as if '-x' had not been specified. This becomes a problem when running housekeeping script from cron. Has anyone else experienced this behaviour? Is there a fix?

I can see the screenshot at my end.
The skimmer is on a gap clip and as far as can be seen in the picture, there is no other content at this point.
If I understood correctly, you still hear audio at that position - is that it?
There are connected audio clips a bit before and a bit after that point.
I am guessing there may have been some corruption in that project.
Try selecting everything, creating a new empty project, and pasting into this new project. If everything works there, delete the old one.
Also, delete FCP X preferences. Start the application holding down command and option keys.

HT4710 when i try to go into iphoto i get a message To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select "Examine and repair iPhoto Library file permissions."

in iphoto i get the shreen with just thr download circle and nothing happens. i click on on edit and get "
To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select “Examine and repair iPhoto Library file permissions.“
it still does not work

Have you tried doing what it says?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Problem with H and Option key on a macbook keyboard

Similar Messages

Maybe you are looking for