Problem with IDOC

Hi experts,
We are looking to synchronize projects and wbs (PS) from a specific environment to another one.
We thought that using IDOC would be a good idea ; We found a message type called PROJECT and associated BAPI WorkBreakdownStruct. After customizing, transfering data is OK; however we did not find any exit to define some conversion rules (for example, we have to change company code from 1000 to 2000)
Please let me know if you can help,
Julien

If u cannot find any exits during Outbound IDoc generation check for any exits availability during the Inbound processing of the IDoc.
The Inbound FM is IDOC_INPUT_PROJECT. Though could not locate an exit in it.
Edited by: Ankesh on Oct 22, 2009 10:09 PM

Similar Messages

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem with idoc DEBMAS

Hi everybody.
We have a problem with idoc DEBMAS.
This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
What can be done in R3 to send always this segment.
We dont want to sent the whole data but always this segment.
Any idea???
Thanks a lot!!!!!

Hi,
As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
if you need that segement always just copy the Idoc type and make it mandaotry field.
otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
Regards,
Suresh

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

HR Programming : Problem with IDOC HRMD_A

Hello ,
We use Idoc HRMD_A for transferring PA records from
one R3 system (ECC5) to another R3 system (46d).
We have a problem - The Idoc doesn't check the data
inserted against the database check tables and
inserts wrong values into the target system database.
(At least that what has happened when we transferred
wrong value of MASSN in 0000 records).
Is there something we can do ?
Maybe - Some flag we can sign in order a check against check tables will be done ?
Is it a problem with this IDOC ?
Thanks .
I appreciate any help.
Nitzan S.

Consultancy note 134085 :
"Ultimately you are responsible for consistency of this data. SAP saves this data directly on the database without checking the single fields and consistency of the data records (time constraints check, writing change pointers, value check) because the consistency for an R/3 - R/3 lingage is of course ensured."
The IDOCs were intended for R3->R3 data replication, and not for data loads/interfacing. Since you're having problems, I'm guessing in addition they require the same SAP version as well.

Problem with IDOCs

Hi all,
I am trying to send MATMAS IDOCs to Siebel server using plain HTTP Reciever Adapter.I am able to see success messages in SXMB_MONI for Some IDOCs I mean where the IDOC have minimum segments which does not contains mandatory data.
In some IDOCs it is showing the following error which includes all the relavant fields for Siebel.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any ideas on this ???
Sekhar

Hi all,
sorry for the confusion...problem with the IDOC data only..
Sekhar

Problems with Idoc Artmas03 to create a variant

Hi everyone, We had created a individual material through Idoc artmas03, we need to create a variant, we have problems with some segments E1BPE1VARKEY & E1BP1AUSPRT, our problem is how to create a variant & how to full this segments, is this correct from Idoc Armas03? or is it necesary another Idoc? Some have some examples, thank you very much
Best Regards from Mexico,
Atte Israel

Guys,
I am running mozilla firefoz 5.0 and the only option that is coming to me is to create folder in CA.
even though SAP recommands IE and allows portal from Mozilla, the later seems to have serious issues with Portal.
I remember working with several versions of mozilla, sometimes you right click, all option will come but you will be unable to choose options coz when u bring cursor to them they will skid here and there..
I hope no SAP note elobrates this as of now.
Ankur

Problems with IDOCS

Hi everyone!
I'm working with IDOCs and I am having the following problem:
I'm modifiying a specific standart IDOC (DELVRY03), adding a new structure called ZSTRUCTURE. When making an example to create the IDOC I am not able to find the new structure that I have just created in the IDOC.
Does anybody know why? Maybe the structure is empty, is this a problem?
Thank you very much.
Regards

hi,
   I dont think u can direct modify sap standard idoc type.
   Instead u can go for Idoc extension.
   Create structure ie segment u want to add say EDIT->set release
    and in we30 choose extension create zobject type with extension as standard idoc and choose EDIT->set release
   and goto we80 add msgtype,Basic idoc type, extension.
   I think this will fix ur problem.
Regards
Shanmukhi

Mapping Problem with IDOC HRMD_A05

Hi All,
When i am mapping source structure with IDOC HRMD_A05 i am getting Mapping not sufficiently defined...
The idoc is used to change the address of employee(infotype 0006)..
my source structure is
EMPADDR_MT
   EmpAddr1
     Trans_INFTY *
    Address1
      AddressType *
      PERNR       *
      EFdate      *
      Addr1       *
      Addr2       *
      ADDR4       *
      City        *
      Country     *
      state       *
      Postalcode *
the fields to be mapped
So can any one help me out what r fields to be maintained for <b>HRMD_A05</b>...
Regards,
Sridhar
Message was edited by: sridhar reddy kondam

All the required fields & segments(shown red in mapping editor or min occurence:1) of idoc need to be mapped.If any of the fields are not available in your source for mapping..map those fields with empty constants using constant option of the mapping editor.

Problems with idoc ORDERS05

Hi experts,
I created a new Z segment for idoc ORDERS05 and it works fine. This idoc is generated whenever a PO is created or modified. But if the PO has locked or deleted items, there is no segment for this items in the IDOC. Should I modify any code or something in SPRO??
Thanks in advance,
Maria

Hi again...
I'm trying to make a copy of the standr FM IDOC_OUTPUT_ORDERS because I think it may be easier to add the segments I need. I have also created in tx. WE41a new operation code ZME10 with my new fm. An in tx. WE20 I have assigned ZME10.
The problem is when I run ME9F i get this error:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',
was neither
caught nor passed along using a RAISING clause, in the procedure
"NEW_DYN_PERFORM" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program "RSNASTED" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZIDOC_OUTPUT_ORDERS".
but "ZIDOC_OUTPUT_ORDERS" cannot be found in its function group.
Any idea ??
thanks in advance !

Problem with IDoc filtering in the distribution model

Hello Experts,
We are using a distribution model in which we have set filters as like the following
Filter Group 1
Plant : XYZ
Sales Org: SAP1
As far as the documentation says this Condition should work with AND logic between Plant and Sales Org
(i.e ~ Plant XYZ and SO SAP1 ) but the IDoc gets created even if any one of the condition is met(looks like working in OR logic).
How to achieve the AND filtering between the different objects.
Would appreciate your kind help.
Thanks in advance.
RGds,
Vasanth.

> Jakub ~ Yes I checked the generated IDocs(classified pertaining to my Model)for my model alone and that's where we are facing this problem
So that's the filtering problem.
I would check in which segments are the "filtering objects" located (BD59) and whether it is a mandatory segment. If it is a mandatory segment - IDoc should not be created. If it is an optional segment - this segment and its subsegmets will be filtered out - but IDoc will be created.
> ~ Do we need to apply some SAP Notes to avoid this problem ?
> But why the filter should behave in OR fashion ? I do not understand.
I believe that Sachin meant that the logic is:
Filter Group1 OR Filter Group 2 OR ... Filter Group N
Filter Group 1 Object 1 AND Filter Group 1 Object 1 ... AND Filter Group 1 Object M
Filter Group 1 Object 1 Value 1 OR Filter Group 1 Object 1 Value 2 OR ... Filter Group 1 Object 1 Value L
regards,
Jakub

Problem with Idoc Mapping

Hi,
Target field is : Bank Address 1:
Source mapping: it is a Idoc with the following requirements
IF E1IDB02 BA-FIIKWAER = CNY and LEN(E1IDB02 BB-FIIBKNAM)<=11
      then MID(E1IDB02 BB-FIIBKNAM,2,10)
IF E1IDB02 BA-FIIKWAER = CNY and LEN(E1IDB02 BB-FIIBKNAM)>11
       then MID(E1IDB02 BB-FIIBKNAM,12,11)
IF E1IDB02 BA-FIIKWAER <> CNY and LEN(E1IDB02 BB-FIIBKNAM)<=35
        then MID(E1IDB02 BB-STRAS,1,35)
IF E1IDB02 BA-FIIKWAER <> CNY and LEN(E1IDB02 BB-FIIBKNAM)>35
       then MID(E1IDB02 BB-FIIBKNAM,36,35)
E1IDB02 -- is a segment name with occurence 1..1
BA and BB are the qualifiers
FIIBKNAM is the field name.
I am unable to map this as the condition has to be given with two qualifiers at a time.
Can some one help me out on this. Can we define the UDF where we can store this information as temporary variable. If UDF can be defined, please let me know with the details.
Regards,
Manoj

HI,
Yes, but you have to write your own UDF ,
but i can give example use this to solve your problem.
IF E1IDB02 BA-FIIKWAER = CNY
then MID(E1EDKA1 BE-NAME1,12,11)
1)
input E1EDKA1 BE-NAME1,E1IDB02 BA-FIIKWAER
if (E1IDB02 BA-FIIKWAER = CNY) {
return substring(E1EDKA1 BE-NAME1,12,11);
2)
input E1EDKA1 BE-NAME1,E1IDB02 BA-FIIKWAER
IF (E1IDB02 BA-FIIKWAER <> CNY ) && ( (E1EDKA1 BE-NAME1).length<=35)
return substring(E1EDKA1 BE-STRAS,1,35);
3)
IF (E1IDB02 BA-FIIKWAER <> CNY) && ((E1EDKA1 BE-NAME1).length>35)
return substring(E1EDKA1 BE-NAME1,36,35);
Before map this first map with same level of empty constant and concat it, if it is empty,later map with substring.
Regards
Chilla

A Uncanny Problem with IDoc Outbound:

Hi,
I meet a problem When outbounding a Z idoc: a field in a segment has no value (While according the trigerred FM logic, should not space): segment structure: matnr lorvm sprat1 ... vkorg
the data source is from table MVKE. Some times the field 'VKORG' is space in IDoc created using FM 'MASTER_IDOC...'.
It is uncanny one as 'VKORG' is a key field in a record, it's value always is not space!
Why the issue occurs?

Hi Nitzan,
ALE does not do these checks! Maybe you can do some coding in ALE-Userexits do achieve this with your own ABAP (i.e EXIT_SAPLRHA0_005).
Where does wrong data come from? Can't it be checked before sending to targetsystem.
What shall ALE do with data, which it cannot insert? Shall it stay there in ALE-input without ever been worked up?
Regards
Herbert

Some problem with IDoc's Settings while loading data

Hey Experts,
Previously i tried data loading using LIS & LO, but i was not able to load data, i was taking it as some transfer structure problem.
But just today i tried to load Master Data, and its displaying the same error. I feel its something related to IDoc/Basis settings, please see the below wrror described and try to help.
<b>Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system</b>
When i am checking the details its saying:
Transfer (IDocs and TRFC): Missing messages or warnings ,
Request IDoc : sent, not arrived ; Error passing data to port.....
Please suggest the solution?
Thanks.....

Hey Roberto,
in the details tab of RSMO, before that IDOC, i m getting this error message also:
1. Requests (messages): Everything OK
1.1 Data request arranged
1.2 Confirmed with: OK
2Extraction (messages): Missing messages
2.1Missing message: Request received
2.2Missing message: Number of sent records
2.3Missing message: Number of sent records
after that its
Transfer (IDocs and TRFC): Errors occurred
If it can add something extra in getting the solution.....
Message was edited by: BI Project

Problem with IDOC TO FILE Scenario

Hi Experts,
I am doing IDOC TO FILE Scenario.
I have done all the configuration.I have cretaed RFC,PORT,LS and Partner profile at both R/3 and
XI Side.
when I am trying to generate IDOC using we19 and I put the r/3 port,partner in sender and XI
port and partner in receiver it gives me error as "Port 'SAPCU6_100' does not exist in the table
of port descriptions.
Please help me.....
Regards

HI Saras,
Please go through the below weblog which has all the stpes which is required for ur scenario...I think screen by screen help u to debug ur problem and it will help u to find out the msitake which u have made.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Problem with Idoc-file scenario

Hi Sdn
In my scenario I am sending data from R/3 using Idoc.I am using Change Pointer in SAP side. My receiver adapter is File adapter, generating a .CSV file.
Now whenever there is ny change in the data in SAP side, Idoc will get triggered and data will come to XI and file will get generated. Now the requirement is, the file shud contain only the changed data with header ,other fields shoud be blank and comma-separated. I don't have ny receiver file structure.
my questions:
1. How much helpful is 'file content conversion' in this case??
2. if mapping is required, how can we do the mapping??
3. Is there any standard mapping function, so that we can check every field with condition and then map them (1:1)?
plz help me.
Thanx in advance.

> Hi Sdn
>
> In my scenario I am sending data from R/3 using
> Idoc.I am using Change Pointer in SAP side. My
> receiver adapter is File adapter, generating a .CSV
> file.
> Now whenever there is ny change in the data in SAP
> side, Idoc will get triggered and data will come to
> XI and file will get generated. Now the requirement
> is, the file shud contain only the changed data with
> header ,other fields shoud be blank and
> comma-separated. I don't have ny receiver file
> structure.
>
> my questions:
>
> 1. How much helpful is 'file content conversion' in
> this case??
You have to use it in order to convert to csv
> 2. if mapping is required, how can we do the
> mapping??
in message mapping
> 3. Is there any standard mapping function, so that we
> can check every field with condition and then map
> them (1:1)?
you can use 'if' or ifWithoutElse to check the condition
> plz help me.
> Thanx in advance.

Problem with IDOC

Similar Messages

Maybe you are looking for