Problem with iDVD Chapter selection

Hi everyone,
I've a problem when burning a DVD. In the preview mode of iDVD, I can select the chapter I want using the scene selection menu, but once the DVD is burnt, every scene selection on my DVD player relaunches the DVD main menu (splash screen, then main menu...)
Does anyone already experienced this problem ? Is it possible to solve it ?
(I am using the latest iDVD version)
Thanks for help
Vincent
iBook 1.33 Ghz 14" SuperDrive Mac OS X (10.4.7)

I know I have seen that problem in these groups before but forget what the solution is. But something you can try is to delete the encoded assets in the project then re-encode/burn the project. Not sure if the menus are the same, but in iDVD4, you go to the Advance menu then select delete encoded assets. This forces iDVD to re-encode everything like it is supposed to. Sometimes if there are assets left over iDVD might see those, thing that part is done and move on. This can result in weird problems like you describe, wrong audio in the DVD, and other issues.
Patrick

Similar Messages

Problem with creating chapter-markers

Hi everyone,
as the title already says it, I've got a problem with creating chapter markers in Quicktime Pro 7.6.4. There's something wrong with the font, displayed in Quicktime. The problem first appeared a few days ago. Before this, everything went fine and I don't have a clue what causes the problem.
Please click HERE to see a screen-recording of the steps I do to create chapters:
- convert the chapters into unformatted text and save it as Unicode (UTF-16) text file.
- open it in Quicktime and everything (including the german umlauts) is displayed correct.
- export it into a Text-file with description
when I open the new text file in Quicktime, the fonts are displayed in asian letters, but when I view it in the Texteditor, the text is almost correct, BUT the umlauts are not ok. So I go on with...
- correct the umlauts and save a new file as Unicode (UTF-16) again.
After I open the new file in Quicktime, the text is completely gone. As the text file seems to be ok in the Texteditor, I guess there must be something wrong with Quicktime. I tried to reinstall Quicktime 7 from the "Mac OS X 10.6 Snow Leopard" Installation-Disc, but the problem persists.
I' would appreciate any help...
Thanks in advance and best regards,
Michael

I'm having the exact same issue. I have created my movie in IMovie 09 then under the "share " menu I sent the movie to iDVD. Everything looks fine on screen, but all I get on the final product is the movie.
After digging deeper into the tutorials all they show is dragging a movie into the idvd shell, not sharing via imovie.
Thus I'm currently attempting to create a quicktime movie then drag it into the IDVD shell. I think that way the chapter markers and everything should show up and burnt into the final project. I'm guessing the "share" option with the IDVD from iMovie doesn't work properly???

F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

Hi
Can You
Go up to File Menu in iDVD - and here down to
Save as a DiskImage
If this works - You can burn Your DVD in another way via Disk Util tool
Yours Bengt W

HT1338 Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Now I checked the materials that I got from AT&T Yahoo and
port 25 is used as the outgoing mail port, 110 for incoming.
This is for the POP type account provided by AT&T, not necessarily for an email account and SMTP server not provided by AT&T.
Sounds like AT&T blocks using an SMTP server that is outside of their network or not provided by AT&T on Port 25.
Try the following first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work, we will go to plan B.

IDVD chapter selections all point to the same video clip!

In iMovie I created a movie with 9 chapters, I'm using iMovie 6 because I can still easily create chapters. I've shared the movie to iDVD and added a music track to the menus only. There are 3 menu pages, the main and two sub menus. When I select "play movie" the entire movie plays through in order. If I select any of the 9 chapters it plays the same clip every time. Doesn't matter which chapter I click on 1-9 it always plays chapter 4. Does anyone have an idea what I may be doing wrong? I've not had this problem before with multiple chapter movies. Thanx

Hi
YES - This is the dreaded iDVD BUG
And it is set of by
• Making a video
• Export it one way or another to iDVD and a New iDVD project
• Finding something needed to be altered and returning to Video-editor (iMovie, FinalCut or whatever)
• Fixing it and returning to iDVD
NOW - iDVD will notice the difference and ask You to either Cancel or Up-date - and now all Chapters points to Chapter one.
Medicine:
• It's said that You can Clear out iDVD assets and re-import the edited video.
• I do - Start a brand new iDVD project - Import last edition of movie and never look back.
Yours Bengt W

Problem with focus and selecting text in jtextfield

I have problem with jtexfield. I know that solution will be very simple but I can't figure it out.
This is simplified version of situation:
I have a jframe, jtextfield and jbutton. User can put numbers (0-10000) separated with commas to textfield and save those numbers by pressing jbutton.
When jbutton is pressed I have a validator which checks that jtextfield contains only numbers and commas. If validator sees that there are invalid characters, a messagebox is launched which tells to user whats wrong.
Now comes the tricky part.
When user presses ok from messagebox, jtextfield should select the character which validator said was invalid so that user can replace it by pressing a number or comma.
I have the invalid character, but how can you get the focus to jtextfield and select only the character which was invalid?
I tried requestFocus(), but it selected whole text in jtextfield and after that command I couldn't set selected text. I tried with commands setSelectionStart(int), setSelectionEnd(int) and select(int,int).
Then I tried to use Caret and select text with that. It selected the character I wanted, but the focus wasn't really there because it didn't have keyFocus (or something like that).
Is there a simple way of doing this?

textField.requestFocusInWindow();
textField.select(...);The above should work, although read the API on the select(...) method for the newer recommended approach on how to do selection.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Problem with align and Selection Tool.

This is a weird problem which I cannot explain at all.
I am using AI CS3 with Windows XP.
I am having this completely random problem with the selection tool and align pallette I cannot explain.
I have a group of objects and groups of objects I am trying to use the align pallette on.
Sometimes when I select all of the items I want to align, either by shift-clicking each one, or by drag-selecting them I am getting a random behavior where sometimes the align button will move all of the objects COMPLETELY off of the artboard, all the way to the edge of the working area and beyond into the grey area you cannot see.
Normally, this would be caused by a stray point somewhere way off-screen or some other cleanup oriented thing on my part. However in this case, the behavior is random and does not happen every time I hit the align button.
Sometimes it takes items within my grouped objects (lines of text) and moves THEM completely off the work area, leaving the other items in the groups in place. Sometimes the bounding box when I drag-select the items will stretch extremely far off of the work area.
I have even dragged the extra large bounding box, bringing the edge that was once way off screen onto the work area, in outline view, in hopes of finding the stray point or object that could be causing this. However NOTHING appears that can be causing the align to throw all of my objects off-screen.
The random nature of this behavior and the way it sometimes affects my text objects inside of groups leads me to believe it is a program bug and nothing I am doing.
The behavior takes place regardless if I select by dragging or by shift-clicking, and is happening in more than one file, also randomly.
Also, choosing "align to art board" vs. "align to crop area" does nothing to change this behavior.
It is quite irritating. I've been using illustrator since v.88 so I have enough experience to know this is not normal.
Any help with this one would be greatly appreciated.

When this behaviour occurs, are perhaps guides included in your selection?

Aspect Ratio Problems with iDVD

I am putting together a video presentation with video from several different sources. I have had a whale of a time getting the video to display uniformly at the same aspect ratio. I put all my separate clips into Quicktime Pro and set the aspect ratio to 960 X 540. FINALLY, in Quicktime Pro I was able to assemble the full video so that ALL the footage played in 960 X 540 and looked seamless. I thought I was in great shape.
Then......I thought I would test the video in iDVD because I need to burn about 40 copies of this presentation. Lo and behold, iDVD takes part of the video footage and somehow changes the aspect ratio of certain footage. Part of the video plays in a small postage stamp area in the upper left of the screen, while other segments play in full widescreen just fine. Obviously, my aspect ratios are still messed up somehow, even though the the entire video plays in full 960 X 540 glory in Quicktime Pro. I'm stumped.
Anybody run across this problem in iDVD before?

Wow, nobody qualified to help me with this problem?
I'm finding out, thanks to more research on my part, that iDVD does not like the aspect ratio of 960 X 540. The only reason I used that setting is because part of of my video has an iMovie 9 "trailer" and iMovie 9's "large" export is set to 960 X 540. The weird thing is iDVD handles segments of my video that is 960X540 just fine, but it completely bungles up the iMovie 9 trailer segment that is 960 X 540.
I have also found in further testing that iDVD does like a .move file in 853 X 480 and displays that aspect ratio in full widescreen glory.
Hopefully this information will help somebody someday avoid the headaches I have had.

Problems with PreparedStatement when select restrict are byte params

Hi,
i have a problem trying to select information when the "select" has a byte restrict.
The table in database is:
CREATE TABLE `positions` (
`PKID` int(10) unsigned NOT NULL auto_increment,
`POSCODE` varbinary(30) NOT NULL,
`ISWTURN` binary(1) NOT NULL,
`QTT_GAMES` int(10) unsigned NOT NULL default '1',
PRIMARY KEY (`PKID`),
UNIQUE KEY `UNIQ_POS` (`POSCODE`,`ISWTURN`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
And the test code to get the qtt_games is :
conn = DriverManager.getConnection (url,user,pwd);
byte bcode[] = poscode.getByteArrayCode();
// bcode is inserted ok in another preparedstatement...
String query = "SELECT qtt_games FROM positions "+
"WHERE poscode=? and iswturn=?";
PreparedStatement pstmt = conn.prepareStatement(query);
pstmt.setBytes (1,bcode);
pstmt.setByte (2,poscode.getIsWhiteTurn()); //it returns a byte
ResultSet rs = pstmt.executeQuery (query);
When pstmt.executeQuery is reached, it's thrown the exception:
com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '=? and iswturn=?' at line 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:936)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2870)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1573)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1665)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3170)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3099)
at com.mysql.jdbc.Statement.execute(Statement.java:695)
at app.server.bbdd.MYSQLBDManager.getGamesBasicInfo(MYSQLBDManager.java:942)
at app.server.bbdd.MYSQLBDManager.main(MYSQLBDManager.java:1068)
Can anybody tell me what's wrong?? I think the query is ok, but don't know what's happening with this...
Lots of thanks.

Hi,
sorry, i know i've post this same message by error in "new to java" thread.... (i'm new in the forum... can i delete the wrong comment??)
The SQLState is 42000 (syntax error), but it doesn't give me much information because i had already searched in google why can be the cause of it, but there are only a few comments about problems like this, without a solution...
The column poscode in the table positions contains an array of bytes that codify a position in a chess board. I've to use this in the WHERE clause because i'm developing a chess game consulting project where there are millions of different positions and i've to get the games that have the same position in it's position history.
The code to insert the positions is:
query = "INSERT INTO positions VALUES "+
"(null,?,?,default) "+
"ON DUPLICATE KEY UPDATE qtt_games=qtt_games+1";
pstmt = conn.prepareStatement(query,Statement.RETURN_GENERATED_KEYS);
pstmt.setBytes(1,bcode);
pstmt.setByte(2,poscode.getIsWhiteTurn());
pstmt.executeUpdate();
which works ok and positions can be seen from mysql browser, but i can't select them using the PreparedStatement..
I have been searching a lot of information about this problem with no results... this is the why i posted this...
Any help will be useful, thanks.

Problem with the default selection screen condition

hi guys,
I have got some problem with the default screen given by the PNP logical database, P0000 infotype automatically populated according to the condition given in default screen.
Reg,
Hariharan

Don know what u r trying to acheive.
1) when u have specified PNP in the logical databse field of attributes of program, the SAP wil proivde u default PNP screen and here u can also add ur paramters if u want.
2) in the program u have to declare like
INFOTYPES: 0000,0001. "Etc
for all the infotypes u want to use in the program.
3) it is the GET PERNR event which wil fil all the p0000 and p0001 (internal tables for al the infotypes declared via INFOTYPES syntax as shown above)
4) after tht get pernr, u now have data in P tables and u can use it for further reporting.
5) refer below dummy code -
REPORT ZPPL_PREVEMPLOYERS   message-id rp
                             line-size 250
                             line-count 65.
*Program logic :- This Report is used to Download all the Previous
* Employer (IT0023) records of the employees
*eject
*& Tables and Infotypes                                                *
tables: pernr.
infotypes: 0000,
           0001,
           0002,
           0023.
*eject
*& Constants                                                           *
constants: c_1(1)       type c               value '1'   ,
           c_3(1)       type c               value '3'   ,
           c_i(1)       type c               value 'I'   ,
           c_x(1)       type c               value 'X'   ,
           c_eq(2)      type c               value 'EQ' ,
           c_pl03       like p0001-werks     value 'PL03'.
*eject
*& Selection-Screen                                                    *
parameters: p_file like rlgrap-filename default 'C:TempABC.xls',
            p_test as checkbox default c_x               .
*eject
*& Internal tables                                                     *
* Internal Table for Output
data: begin of t_output occurs 0    ,
       pernr like pernr-pernr       ,
       nachn like p0002-nachn       ,
       vorna like p0002-vorna       ,
       orgeh_stext like p1000-stext ,
       plans_stext like p1000-stext ,
       begda like p0023-begda       ,
       endda like p0023-endda       ,
       land1 like p0023-land1       ,
       arbgb like p0023-arbgb       ,
       ort01 like p0023-ort01   .
data: end of t_output           .
*eject
*& Variables                                                           *
data: o_stext like p1000-stext,
      p_stext like p1000-stext.
*eject
*& Initialization                                                      *
Initialization.
* Initialize Selection-Screen values
perform init_selction_screen.
*eject
*& AT Selection-screen                                                 *
at selection-screen .
* Check if Test run selected, download file name should be entered
if p_test is initial. "
    if p_file is initial.
      message e016 with 'Please enter file name'
                        'specifying complete path'.
    endif.
endif.
*eject
*& Start-of Selection                                                  *
Start-of-selection.
get pernr.
clear t_output.
* Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Check if employee is active
check p0000-stat2 in pnpstat2.      "pernr Active
* Read Infotype 1
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* check if employee belongs to PL03
check p0001-werks in pnpwerks. "belongs to PL03
* Check if emp belongs to Active Group
check p0001-persg in pnppersg.
* Read Infotype 2
rp-provide-from-last p0002 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Read Org Unit Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
     EXPORTING
          OTYPE                   = 'O'
          objid                   = p0001-orgeh
          begda                   = p0001-begda
          endda                   = p0001-endda
          reference_date          = p0001-begda
     IMPORTING
          object_text             = o_stext
      EXCEPTIONS
          nothing_found           = 1
          wrong_objecttype        = 2
          missing_costcenter_data = 3
          missing_object_id       = 4
          OTHERS                  = 5.
*Read Position Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
     EXPORTING
          OTYPE                   = 'S'
          objid                   = p0001-plans
          begda                   = p0001-begda
          endda                   = p0001-endda
          reference_date          = p0001-begda
     IMPORTING
          object_text             = p_stext
     EXCEPTIONS
          nothing_found           = 1
          wrong_objecttype        = 2
          missing_costcenter_data = 3
          missing_object_id       = 4
          OTHERS                  = 5.
* Gather all the required information related to the emp
move: pernr-pernr to t_output-pernr,
        o_stext to t_output-orgeh_stext,
        p_stext to t_output-plans_stext,
        p0002-nachn to t_output-nachn,
        p0002-vorna to t_output-vorna.
* Gather previous Employee details
loop at p0023.
    move-corresponding p0023 to t_output.
    append t_output.
endloop.
*eject
*& End-of Selection                                                    *
end-of-selection.
perform print_report.
* Downlaod the file
if not t_output[] is initial.
    if p_test eq space.
      perform download_file.
    endif.
else.
    write: 'No records selected' color col_negative.
endif.
*eject
*& Top-of-page                                                         *
Top-of-page.
* Print Header
perform print_header.
*eject
*&      Form download_file
* Description :
FORM download_file .
DATA: full_file_name    TYPE string,
        z_akt_filesize    TYPE i     .
full_file_name = p_file.
* download table into file on presentation server
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename                = full_file_name
      filetype                = 'DAT'
      NO_AUTH_CHECK           = c_x
      codepage                = '1160'
    IMPORTING
      FILELENGTH              = z_akt_filesize
    CHANGING
      data_tab                = t_output[]
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      not_supported_by_gui    = 22
      error_no_gui            = 23
      OTHERS                  = 24.
IF sy-subrc               NE        0.
    MESSAGE e016 WITH 'Download-Error; RC:' sy-subrc.
ENDIF.
ENDFORM.                    " download_file
*eject
*&      Form print_report
*Description:
FORM print_report .
data: i       type i,
        w_count type i.
sort t_output.
* Print the report
loop at t_output.
    i = sy-tabix mod 2.
    if i eq 0.
      format color col_normal intensified on.
    else.
      format color col_normal intensified off.
    endif.
    write:/1     t_output-pernr          ,
           10     t_output-vorna(25)     ,
           35    t_output-nachn(25)      ,
           61   t_output-orgeh_stext     ,
           102 t_output-plans_stext     ,
           143 t_output-begda           ,
           154   t_output-endda          ,
           168   t_output-land1          ,
           178   t_output-arbgb(40)      ,
           219   t_output-ort01          ,
           249   space              .
endloop.
uline.
Describe table t_output lines w_count.
Skip 2.
Write:/ 'Total No of Records Downloaded: ' color col_total,
          w_count.
ENDFORM.                    " print_report
*eject
*&      Form print_header
*Description:
FORM print_header .
skip 1.
Uline.
format Intensified on color col_heading.
write:/1   'Pers. #'        ,
         10   'Last Name'     ,
         35   'First Name'    ,
         61   'Org Unit'      ,
         102 'Position'      ,
         143 'Beg Date'      ,
        154   'End Date'      ,
        168   'Cntry Key'     ,
        178   'Prev Employer' ,
        219 'City'           ,
        249   space          .
format intensified off color off.
uline.
ENDFORM.                    " print_header
*eject
*&      Form init_selction_screen
*Description:
FORM init_selction_screen .
refresh: pnpwerks,
           pnppersg,
           pnpstat2.
clear:   pnpwerks,
           pnppersg,
           pnpstat2.
pnpwerks-sign   = c_i.
pnpwerks-option = c_EQ.
pnpwerks-low    = c_pl03.
append pnpwerks.
pnppersg-sign   = c_i.
pnppersg-option = c_EQ.
pnppersg-low    = c_1.
append pnppersg.
pnpstat2-sign   = c_i.
pnpstat2-option = c_EQ.
pnpstat2-low    = c_3.
append pnpstat2.
ENDFORM.                    " init_selction_screen

Problem with userdefined combobox selection

Hi guys,
Have an "AutoSearchComboBox" as follows for searching the combolist fast.Have some problems with the selection in the AutoSearchComboBox.
*public class AutoSearchComboBox extends JComboBox {*
private static final long serialVersionUID = 1L;
*public AutoSearchComboBox(){*
setEditable(true);
setModel(new AutoSearchComboBoxModel());
setEditor(new MyComboBoxEditor());
public class AutoSearchComboBoxModel extends AbstractListModel
*implements MutableComboBoxModel{*
private static final long serialVersionUID = 1L;
private Vector items,filteredItems;
private Filter filter;
private Object selectedItem;
*public AutoSearchComboBoxModel(){*
this.items = new Vector();
this.filteredItems = new Vector();
this.filter = null;
updateFilteredItems();
*public void addElement(Object obj) {*
items.add(obj);
updateFilteredItems();
public void insertElementAt(Object obj, int index) {}
*public void removeElement(Object obj) {*
items.remove(obj);
updateFilteredItems();
*public void removeElementAt(int index) {*
items.remove(index);
updateFilteredItems();
*public Object getSelectedItem() {*
return selectedItem;
*public void setSelectedItem(Object anItem) {*
if ((selectedItem==null) && (anItem==null))
return;
if ((selectedItem != null) && (selectedItem.equals(anItem)))
return;
if(anItem!= null && anItem.equals(selectedItem))
return;
selectedItem = anItem;
fireContentsChanged(this, -1,-1);
*public Object getElementAt(int index) {*
return filteredItems.get(index);
*public int getSize() {*
return filteredItems.size();
*public void setFilter(Filter filter){*
this.filter = filter;
updateFilteredItems();
*public void updateFilteredItems(){*
fireIntervalRemoved(this,0,filteredItems.size());
filteredItems.clear();
if(filter==null)
filteredItems.addAll(items);
else
*for(Iterator iter = items.iterator(); iter.hasNext();){*
Object item = iter.next();
if (filter.accept(item))
filteredItems.add(item);
fireIntervalAdded(this,0, filteredItems.size());
*public static interface Filter{*
public boolean accept(Object obj);
*class FilterItems implements Filter{*
private String prefix;
*public FilterItems(String prefix){*
this.prefix = prefix;
*public boolean accept(Object obj){*
return doesStartsWithThePrefix(obj.toString(),prefix);
*private boolean doesStartsWithThePrefix(String str1,String str2){*
return str1.toUpperCase().startsWith(str2.toUpperCase());
*public class MyComboBoxEditor implements ComboBoxEditor,DocumentListener{*
private JTextField text;
private volatile boolean filtering = false;
private volatile boolean setting = false;
*public MyComboBoxEditor(){*
text = new JTextField(15);
text.getDocument().addDocumentListener(this);
*public void addActionListener(ActionListener l) {*
*// TODO Auto-generated method stub*
*public void removeActionListener(ActionListener l) {*
*// TODO Auto-generated method stub*
*public Component getEditorComponent() {*
return text;
*public void setItem(Object anObject) {*
if(filtering)
return;
setting = true;
String newText = (anObject==null)? "":anObject.toString();
text.setText(newText);
setting = false;
*public Object getItem() {*
return text.getText();
*public void selectAll() {*
text.selectAll();
*public void changedUpdate(DocumentEvent e) {*
*// TODO Auto-generated method stub*
*public void insertUpdate(DocumentEvent e) {*
handleChange();
*public void removeUpdate(DocumentEvent e) {*
handleChange();
*public void handleChange(){*
if(setting)
return;
filtering = true;
Filter filter = null;
if(text.getText().length()>0)
filter = new FilterItems(text.getText());
*((AutoSearchComboBoxModel)getModel()).setFilter(filter);*
setPopupVisible(false);
if (getModel().getSize()>0)
setPopupVisible(true);
filtering = false;
Iam creating the combo boxes as follows from another source file.
private AutoSearchComboBox indexTagCombo,indexValueCombo
//The following function is called for loading the comboBoxes.
private void loadInitialIndexTagValues()
indexTagCombo.removeAllItems();
//Getting values to be fiiled in the comboBox.
Set tags = this.model.getAvailableIndexTags();
// Iterating over the elements in the set
Iterator tagIter = tags.iterator();
while (tagIter.hasNext()) {
indexTagCombo.addItem(tagIter.next());
//Loading index values.
String currTag = (String)indexTagCombo.getSelectedItem(); //Selection problem 1
The statement above returns me null & the follwing code doesnt fill the other comboBox.
Set values = model.getAllValues(currTag);
indexValueCombo.removeAllItems();
Iterator valIter = values.iterator();
while (valIter.hasNext()) {
indexValueCombo.addItem(valIter.next());
Have added an "itemListener" to the indexTagCombo as follows:
indexTagCombo.addItemListener(new ItemListener(){
public void itemStateChanged(ItemEvent e)
indexTagSelection(e);
private void indexTagSelection(ItemEvent e) {
if (e.getStateChange() == ItemEvent.SELECTED)
//The "getStateChange" is never ItemEvent.SELECTED,so that it never gets in to this loop.//Another problem
//code goes Here
There is some problem with the defined "AutoSearchComboBox" with selection.When I change the privately defined "AutoSearchComboBox" to JComboBox and make it editable,all the selection problems are gone.
In short all the "getSelectedItem" from the "AutoSearchComboBox" and the "itemstate" events defined are not going to the "ItemEvent.SELECTED"
What should I fix in the "AutoSearchComboBox" so that the selections work.
Any help is greatly appreciated.
Thanks
P

Hi Smita,
When you create the Transaction code either thru Se80 or thru Se93... please see that you are giving the screen number asked there as 1000, which is the default screen number for the selection screen.
Also, please see if the checkboxes for the GUI Support are ticked. I think it iwll solve you problem.
Regards,
Jayant

Problem with quick mask selection appearence

Hi,
I am having a problem with the quick mask view (red) selection. When i press the \ key to see the selection i get a red rectangle in a random place of the screen instead of the red selection. Before the last update i had no such problem. Any solution to this ?
I am working on 64bit cc version Win8

No I tried to disable the Graphics Processor but no result. It is as it tries to aply the mask but crushes. if i leave it for about 10 sec photoshop crushes also...

Problem with Headstart Multi-Select LOV

Hi,
I'm working on a few forms which should include a Multi-Select
LOV. Now here's the problem: One MSEL doesn't close; you can
select record(s), the LOV returns them, but doesn't disappear.
Clicking Cancel doesn't help.
Another MSEL-problem in another form: if you click Select All,
this selection isn't visible in the MSEL. He returns all of the
records, but it looks like he only selected one. Working with
CTRL to select more than one record doesn't work either. This
one closes fine.
As you know I have to include module component
QMS_MSEL_LOV_BUTTONS (which includes all button-functionality),
and then it should work, but it doesn't.
We've checked all the properties and they seem to be correct. It
isn't the first time we encountered these problems. We always
rebuilt the MSEL LOV, but it doesn't help this time.
Has anyone got an idea what's causing this problem.
P.S. There are also MSEL LOV's which operate just fine, without
any problems; only these two are doing strange things.
Thx,
Wouter

Workaround provided by Lauri Boyd seems to have worked:
A bug (#1985903) was introduced in Forms 6.0.8.13.0 and later which affected Headstart. This was fixed in Headstart patch 6.5.2.1 which is available through the Supplement Option.
Description
===========
1. When using a multi-select LOV (which is displayed in a modal dialog
window), you select the records you want, press OK, and the application exits.
2. When using a shuttle control to move records from left to right or vice
versa, you select the records you want, press '>' to move them, and the
application exits.
This occurs in Forms 6.0.8.13.0 and 6.0.8.14.1. It did NOT occur in prior
releases. This is some kind of forms bug.
Workaround
==========
For some reason the call to procedure renumber in qms$msel.process_records
causes the application to exit. If you copy the code from renumber to all the
places from which it is called, it works fine.
- open qmslib65.pll in Form Builder
- open package body qms$msel
- find procedure process_records and define a local variable l_recno of type
number.
- find local procedure renumber and copy the body of this procedure
(everything
after 'begin' and before 'exception').
- replace each call to 'renumber;' with the copied code.
Regards,
Lauri

Problem with iDVD Chapter selection

Similar Messages

Maybe you are looking for