Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Similar Messages

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

[URGENT] Performance problem with BC4J and partioned data

Hi all,
I have a big performance probelm with BC4J and partitioned data. As as partitioned table shouldn't have a primary key like a sequence (or something else) my partitioned table doesn't have any primary key.
When I debug my BC4J application I can see a message showing me "ignoring row with no primary key" from EntityCache. It takes a long time to retrieve my data even if I use the partition keys. A quick & dirty forms application was multiple times faster!
Is this a bug in BC4J, or is BC4J not suitable for partitioned data? Can anyone give me a hint what to do, do make the BC4J application fast even with partitioned data? In a non-partitioned environment the application works quite well. So it seams that it must be an "error" somewhere in this part.
Thanks,
Axel

Here's a SQL statement that creates the table.
CREATE TABLE SEARCH
(SEAR_PARTKEY_DAY              NUMBER(4)        NOT NULL
,SEAR_PARTKEY_EMP            VARCHAR2(2)      NOT NULL
,SEAR_ID                     NUMBER(20)       NOT NULL
,SEAR_ENTRY_DATE             TIMESTAMP        NOT NULL
,SEAR_LAST_MODIFIED            TIMESTAMP             NOT NULL
,SEAR_STATUS                 VARCHAR2(100)    DEFAULT '0'
,SEAR_ITC_DATE               TIMESTAMP        NOT NULL
,SEAR_MESSAGE_CLASS          VARCHAR2(15)     NOT NULL
,SEAR_CHIPHERING_TYPE        VARCHAR2(256)
,SEAR_GMAT                   VARCHAR2(1)      DEFAULT 'U'
,SEAR_NATIONALITY            VARCHAR2(3)      DEFAULT 'XXX'
,SEAR_MESSAGE_ID             VARCHAR2(32)     NOT NULL
,SEAR_COMMENT                VARCHAR2(256)    NOT NULL
,SEAR_NUMBER_OF              NUMBER(3)        NOT NULL
,SEAR_INTERCEPTION_SYSTEM    VARCHAR2(40)
,SEAR_COMM_PRIOD_H           NUMBER(5)        DEFAULT -1
,SEAR_PRIOD_R                  NUMBER(5)        DEFAULT -1
,SEAR_INMARSAT_CES           VARCHAR2(40)
,SEAR_BEAM                   VARCHAR2(10)
,SEAR_DIALED_NUMBER          VARCHAR2(70)
,SEAR_TRANSMIT_NUMBER        VARCHAR2(70)
,SEAR_CALLED_NUMBER          VARCHAR2(40)
,SEAR_CALLER_NUMBER          VARCHAR2(40)
,SEAR_MATERIAL_TYPE          VARCHAR2(3)      NOT NULL
,SEAR_SOURCE                 VARCHAR2(10)
,SEAR_MAPPING                VARCHAR2(100)    DEFAULT '__REST'
,SEAR_DETAIL_MAPPING         VARCHAR2(100)
,SEAR_PRIORITY               NUMBER(3)        DEFAULT 255
,SEAR_LANGUAGE               VARCHAR2(5)      DEFAULT 'XXX'
,SEAR_TRANSMISSION_TYPE      VARCHAR2(40)
,SEAR_INMARSAT_STD           VARCHAR2(1)
,SEAR_FILE_NAME              VARCHAR2(100)    NOT NULL
PARTITION BY RANGE (SEAR_PARTKEY_DAY, SEAR_PARTKEY_EMP)
PARTITION SEARCH_MAX VALUES LESS THAN (MAXVALUE, MAXVALUE) MIRA4_SEARCH_EVEN
);of course SEAR_ID is filled by a sequence but the field is not the primary key as it would decrease the performance of partitioned data.
We moved to native JDBC with our application and the performance is like we never expected to be!

Problem with item and/or data during page-processing-PS/SQL

Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobi

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Problem with importing and creating self signed SSL certificate

Mac Pro, 10.7.2 Server. Attempting to import or create a self signed certificate for use as ichat.domain.com to encrypt iChat service. Server is acutally called server.domain.com but has an alias of ichat.domain.com. I understand that this is probably not best practice but I would like to keep things this way since we have one server, run multiple services on it, but want to continue to connect to each service at SERVICE.domain.com. We have been using this type of mismatched certificate with success since 10.4 or so.
I am working through setup of 10.7 Server to replace our 10.6 server.
Tried upgrade of 10.6 to 10.7 installation. The installation made a mess of some services and our Open Directory, but did move the certificate over and allowed iChat service to function properly.
Clean install and setup of 10.7 Server. Exported self signed certificate, private key, and encryption password from 10.6 Server and functioning 10.7 upgraded Server.
On import or manual creation of certificate get the following error:
Error
Check your server's logs for more information. The error (code 5001) was: Expected SecKeychainItemImport to return a SecIdentityRef, but it did not
Log shows:
Dec 29 17:56:55 server servermgrd[498]: -[CertsRequestHandler(HelperAdditions) importP12Data:passphrase:error:]: importedItems = (
"<SecCertificate 0x7fcf6ed43c00 [0x7fff78d96f40]>"
I have tried importing and manually creating other certificates with a variety of names with success. I assume that there is something buried somewhere that is causing this particular one to be a problem. Other than manually removing any remnants of the certificate from /etc/certficates I do not have any ideas what to try. I am essentially ready to move this server to 10.7 except for this problem and would like to avoid a reinstall.
Suggestions?
-Erich

Take a look here.
https://bbs.archlinux.org/viewtopic.php?id=146649
Maybe it's a problem with your network.

Problem with material and document date in sales order

Hi All,
I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
1.A material comes automatically in line item.
2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
Your's suggestion is appreciated.

Hi Sharad,
Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
Hope it helps
Regards
Byju

Problem with Import and Base Object

Hi everyone
Last week, I downloaded Flash CS5. I am trying different thing and here is the problem that I dont understand
I wrote a package like that
package {
    import flash.text.TextField;
    import fl.controls.Button;
    public class ex1 extends Sprite {
        public function ex1() {
           var myButton:Button = new Bu
tton();
            var label:TextField         = new TextField();
            addChild(label);
If I try to execute that script, the compiler returns error
1046: Type was not found or was not a compile-time constant: Button.
1180: Call to a possibly undefined method Button.
If I insert in the main stage (with the Componet Editor) a Button in the main stage, and recompile it, no error.
If I delete the Button in the main stage and recompile again, no error
But, If I save the projet and reload it again, I've got the same error
By the way, I dont have any problem with the textField()
What is wrong with my setup.
OTHER QUESTION:
If in the ACTION FRAME (F9), I insert the folowing code:
import ex1;
var a:ex1 = new ex1();
one more time, I've got error from the compiler. Why ?
We cannot include a package in the ACTION FRAME ?
Thanks for your help

There are some things (including $.fileName) that just do not work in jsxbin's.
I don't thing the exception hook will work either.
Either use an ini file in a well known location (~/Desktop) or make sure your
files are put in Presets/Scripts. That location can be determined with this bit
of code:
var SCRIPTS_FOLDER =
new Folder(app.path + '/' +
localize("$$$/ScriptingSupport/InstalledScripts=Presets/Scripts"));
-X

Best Method for Importing and Exporting Data to a local 'resrouce' file

I've searched the forum, and seen glimmers of hope to what I am trying to piece together - but not in a concise way that will sink into my brain.
Using Javascript on a PC for IDCS2, I'm writing a simple script that has a user interface.
I'd like to have 4 default values for the user interface to be read from (and if altered, written to) a text file.
What's the simplest way to go about this? I've read through many posts, and toyed around with readln and writeln functions, but nothing is working out. For some reason, I can't send any information to any file - let alone read it back in.
Could somebody point me in the right direction? For simplicity sake let's say I have just one variable, "myVariable" - and I want to send it to and read it from c:\test.txt.
Someday - this will all sink in. Right now, I'm reaching for Aspirin.

Hi D Scott Chinn,
Try something like this:
var myFile = File.saveDialog ("Save file as:")
if(myFile != undefined){
var myString = "Write this string to a file."
myFile.open("w");
myFile.write(myString);
myFile.close();
Thanks,
Ole

Having problem with adding and reading dates to/from database !!!

Hi
I am new in J2ME
I am trying to code a simple software.
My problem is with dates.
I have a datefield on my menu and the user will choose the date from here. By default, datefield shows todays date. But when I try to write that date to database using rms, date value transforms to java.util.Date@acfdb0fe.
As I read from tutorials this is common problem of date class, so I tried to use calendar class.
But with Calendar class I cannot let user to choose date from screen like DateField. datefield dowsn't work with calendar.
later, I will use that date for sorting records
Summary : I need a sample code that read date from screen (preferably with datefield), write it to recordstore. and then read it from recordstore asnd write to screen.
I searching internet for a sample code through days.
Please help me
Thanks

Hi,
The best i would suggest is instead of storing the date as 19 Jan 2004 or something like this better store the date in milliseconds.
DateField df = new DateField();
Date d = df.getDate();
long ms = d.getTime();
store the value of ms in RMS. This is the commonly used way to store date in RMS for j2me.
You can get back date using
Date d = new Date(ms);
DateField df = new DateField();
df.setDate(d);
Prabhu.

Problems with importing and burning

Could you help me as well? I'm having similiar issues?
Microsoft Windows Vista Business Edition Service Pack 2 (Build 6002)
HP-Pavilion GN636AAR-ABA a6250z
iTunes 10.1.1.4
QuickTime 7.6.9
FairPlay 1.10.14
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.0.69
Apple Mobile Device Driver not found.
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number FC453AB706D7C0B5
Current user is not an administrator.
The current local date and time is 2010-12-28 20:11:15.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 6100 nForce 430 (Microsoft Corporation - WDDM)
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.1.4 is currently running.
iTunesHelper 10.1.1.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: TSSTcorp CDDVDW TS-H653N, Rev 0208
Audio CD in drive.
Found 10 songs on CD, playing time 30:15 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:26:50
Track 3, start time 07:08:52
Track 4, start time 09:49:37
Track 5, start time 12:10:52
Track 6, start time 14:55:15
Track 7, start time 18:34:65
Track 8, start time 22:15:05
Track 9, start time 24:38:15
Track 10, start time 27:40:57
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: TSSTcorp CDDVDW TS-H653N on CDR media at speed 16X.
Thanks.

E: TSSTcorp CDDVDW TS-H653N, Rev 0208
Interesting ... I'm pretty sure that there's later HP-supplied firmware (409 and 609) available for that drive, but it isn't showing up on the Downloads page for your particular HP model.
There's also another problem we need to check on with a TS-H653N supplied by HP: whether or not you need to get a free replacement.
So we'd better try downloading and running the following HP utility (it checks to see if you've got an affected drive):
[DVD-R/RW Drive Replacement|http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareit em=pv-54948-3&cc=us&lc=en&dlc=en]

Problems with bleed and exporting to PDF.

Hi,
I am having a slight problem exporting a file to pdf in Indesign CS3.
I have my documents set up with a 3mm bleed and I have made sure that the images and work extend passed the bleed marks as they should. The problem is that when I export to pdf, the pdf file appears to have cropped the work exactly on the bleed line leaving nothing extending passed the bleed. The 3mm bleed area is still there but nothing is extending into it which is kind of pointless. I don't know whether there is a setting I am missing or something like that but any help on this matter would be greatly appreciated.
Cheers

"It appears to crop it exactly on the bleed line."
for the record, isn't that what it's supposed to do?
Your bleed line is 3mm outside the trim. Anything you bleed will be contained in that 3mm band. If you hang any more than 3mm off the edge, only the 3mm in the bleed band will show on the PDF.
k

Problems with N80 and usb data transfer

data transfer started off working fine (I think) but now the pop-port connection seems really flakey. It keeps dropping the connection and causing transfers to fail on mac and PC. hope it's the cable, but anyone else having this problem?

I'm okay with bluetooth at the moment - I use iSync on the Mac which seems to work okay. File transfer over bluetooth also seem to work okay - just tested with a couple of mp3s. However, I need to use USB for large quantities of data (music, photos, etc) and it doesn't seem to work. I have tried it on both a mac and a pc with the same issue each time.
The symptoms I have are exactly the same as you sysinit - if I touch the device then it seems to disconnect and reconnect rapidly. Unfortunately, even if I leave the device completely untouched and try to transfer 100MB of data, invariably it only gets halfway before conking out!
Most of the other software issues I can deal with (I had a Sony Ericsson P900 before this which had its fair share of problems!), but this to me is a showstopper. If there is no fix for the problem then the handset is going back as the problem is so easy to reproduce.

Problem with tooltips and spry data using startLoadInterval

I am trying to use tooltips with a dynamic table using the spry data example at the bottom of the page:
http://labs.adobe.com/technologies/spry/articles/tooltip_overview/index.html
I have it working except that it appears to have a memory leak as firefox's memory usage continues to grow.
I did notice there is a 'new' inside the onPostUpdate:function that is being called on every table update.
So after looking at the tooltip code I modified the function to:
<script type="text/javascript">
var tt1;
var observer = {onPostUpdate:function(){if(tt1 == null){tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}else{tt1.destroy(); tt1.destroy();if(tt1.checkDestroyed()) alert("destroyed");else alert("not destroyed");delete tt1; tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}}}
Spry.Data.Region.addObserver('mainRegion', observer);
</script>
The tt1.checkDestroyed() always returns false and my memory usage continues to grow.
Any help?

Thanks for the reply. I found a way to get it to work by changing my
observer function to the following:
else{tt1.destroy();
tt1.init('.trigger', 'tooltip',
{});tt1.attachBehaviors();Spry.Widget.Tooltip.loadQueue.push(tt1);}}
Probably not very clean but it doesnt grow memory and works correctly.
I just put it back to the old way as in the example with a
startLoadInterval(1500) :
And I am over 500MB after ~ 30 minutes where as the top code above ran with
a startLoadInterval(1500); overnight and is about ~120MB.
I am using a double repeatchildren loop to build a table with tooltips for
each cell which may affect it.
Bottom line is I have a way to make it work so I am moving forward. If you
still want to see it I might be able to get it up on the internet and give
you a link.
Thanks,
Greg Wirth

Problems with SUBMIT and EXPORTING LIST TO MEMORY

Hi,
I have a program that executes another report using a submit call, then the output of this submit is retrieved to the program using the LIST_TO_MEMORY FM. Source code it's something like this:
SUBMIT rptime00
             EXPORTING LIST TO MEMORY AND RETURN
             WITH SELECTION-TABLE t_params
             USER 'my_user'.
CALL FUNCTION 'LIST_FROM_MEMORY'
     TABLES
         listobject = t_table
     EXCEPTIONS
         not_found = 1
         OTHERS     = 2.
This code works fine if I execute the program in foreground. But when I try to execute the report in background (F9 instead of F8 for example), submit works fine but LIST_FROM_MEMORY returns a NOT FOUND exception instead of the output of submitted program.
So, is it possible to retrieve the output of a program called via submit when the report that executes the submit is executed in background?, how can I retrieve the output of submit when the report is executed in background?
thanks in advance

try
SUBMIT rptime00
             EXPORTING LIST TO MEMORY AND RETURN
             WITH SELECTION-TABLE t_params.
without user
hope that helps
Andreas

Problem with Import and Export Data Wizard

Similar Messages

Maybe you are looking for