Problem with importing images from Nikon S60

I have been using photoshop elements for several years - currently on Version 8.  I've had no issues importing images from my Nikon D70 - I choose the option to store the images in folders by "shot date" and this has always worked.
My wife has started using a Nikon S60 to take photos - when trying to import these photos they all end up in a folder with today's date.  I've treid a couple of times to be sure that I didn't make a mistake in setting the import options.  I've checked the "properties" of the images and the date their shows the shot date...
any ideas?

Seems unusual behavior. I guess the obvious thing to do is to simply rename the folder although that’s a bit annoying.
Have you tried selecting one of the other shot date formats from the downloader, perhaps to match the camera date format?
Click image to enlarge.

Similar Messages

  • I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

    I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • I am facing a Problem with reading images from database

    Hi everybody..
    any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code... 
                    string connect = "datasource = localhost; port = 3306; username = root; password = ;"; 
                    MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
                    MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
                    MySqlDataReader reader; 
                    try
                        conn.Open(); // Opening Connection
                        reader = sda.ExecuteReader(); // Executing my Query..
                        while (reader.Read())
                            byte[] imgg = (byte[])(reader["Picture"]);
                            if (imgg == null)
                                pc1.Image = null;
                            else
                                MemoryStream mstream = new MemoryStream(imgg);
                                pc1.Image = System.Drawing.Image.FromStream(mstream);
    It says Parameter not Valid... i am reading all the images from database

    I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
    to compare the imgg array data with the data before it was written to the database to see if the data matches.  I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
    byte count.
    An image is binary data.  The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data.  The solution usually is to use UTF8 encoding instead of the default ascii encoding. 
    Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
    jdweng

  • Problem with NEF files from Nikon D4

    Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

    This question used to be answered in the FAQ before they revised it.  So, here we go again.  ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings.  It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images.  Lightroom does not read those settings from Nikon cameras or any other brand of camera.  Part of the reason is that different camera makers store those settings differently.
    When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it.  Then I saved those adjustments as my default settings for the camera.  From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images.  Of course, I still have to make individual adjustments.  But my default settings greatly reduce the amount of how they work that I have to do.
    Active D-lighting is is one of those features that Lightroom does not recognize.  You would be well advised not to use it, or else create a preset to simulate its effect.  It will provide no benefit to your Lightroom work.
    This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
    I realize this question was asked in the ACR forum and I referenced Lightroom throughout.  But the principle is the same, and the recommended procedure is the same.

  • Problem with importing images into time lapse

    Hi
    I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
    I want to create a time lapse using a sequence of still photographs.  All file names are sequentially name/numbered. 
    I am using the Motion workspace, and have followed all of the instructions available. 
    Create correct sized new document (film & video).
    Create video timeline.
    Set frame rate.
    Choose 'create new video layer from file'.
    Point to first image in the folder where the images are stored.
    At this point, no matter what I have tried, I receive this error:
    I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
    If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
    It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
    Anyone have any idea why I could be having these problems?
    I have reset Photoshop, deleted the settings file, even reinstalled it.  I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
    Stuart

    Unfortunately, yes--I've tried it that way over and over, and every other way I could think of.  The files are all in one folder, and I've converted the raw files to both tiffs and jpegs.  I even tried converting them to jpegs at the final pixel dimensions.  Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered.  I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores.  I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
    I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
    The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead. 
    Anyway, thanks for all of your time.  It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge.  I like to know WHY it won't work for me.  Sometimes it seems that there is just no logical explanation!
    Stuart

  • Imported RAW images badly corrupted, looks like red paint splashed all over the sky.  Photoshop and Iphoto have no problem with the images from my D800E.  Aperture worked fine for me in June with the same camera.  The Nikon software shows no problem.

    I am having a problem importing my images into Aperture 3 from my Nikon D800E.  The images appear as if red paint was splashed across the sky.  The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software.  Aperature does not even like the jpg images usable by Photoshop.  I am suspecting that Aperture is not correctly using the camera raw file.  Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions.  Aperture worked just fine for me in June with the same camera.  All drivers and software are current as of this posting.  Anyone else out there seen this before??

    Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
    The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
    Aperature does not even like the jpg images usable by Photoshop
    If the JPG's have the same problem then it isn't this bug.
    regards

  • Problem with imported text from quark

    Hi everyone
    I have imported files from quark version 4 off a mac to Indesign cs4 on a windows PC. everything is fine apart from the text being a little messed up so i am happy enough with that. The problem is that when i drag and drop or copy and paste into a new document all the images will move over but new text will not work with the images.
    By this i mean that when i try to type something over or near the graphics the graphics just vanish! you can drag them over the image and they vanish, then when you drag them away again them reappear!
    Also the shapes that i move over have a thin white border on them where as the shapes that i create directly do not have this boarder.
    Any help that you cold give me on this would be great!
    Thanks in advance!!
    Sam

    Thats it thank you!
    There was a text wrap applied to all the graphics. its working perfectly now!!
    Thank you again!!!
    Sam

  • Problem with imported movies from Sony Cyber Shot

    Hello all, I have an unusal problem.
    My mate has got a brand new sony cybershot camera which does movies.
    These movies import into iPhoto no problem with sound.
    However if I then use that clip in iMovie there is no sound, it does not matter how I try to import. I have tried importing direct from the sony card, from the import menu and from dragging. Still no dice.
    What should be the next step?
    Its iMovie HD and 10.4.4

    Hi Gary
    get for 20$ the Apple mpeg2 plugin
    and for free the tool Streamclip
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml

  • Problem with importing videos from Aperture

    I was able to import videos from Aperture within FCPX.  However, when I tried to import some older videos, the following error message appeared:
    "No importable files
    None of the selected files or folders can be imported.  Change the selection and try again."
    I noticed that all the video files older than about three months didn't work, and all the newer files worked, regardless what camera it was from (D800, iPhone, m4/3 camera)
    I opened up the aperture library package and compared the permission for one video file that I could import, and one that I couldn't.  They have the same permissions, so it isn't a permission issue.  I tried exporting the problem video from Aperture and importing it into FCPX, and it accepted it.
    The other thing I've noticed that is for the files that I imported from Aperture library, the video files in the Original Media folder are only around 250 KB.  It seems that they are only aliases.  All the more reason I need to find a way to drag videos from Aperture into FCPX, as the files aren't duplicated.
    Does anybody know a solution to this problem?
    Thanks a lot!

    Aperture drag'n'drop export only creates reference movies (which can break!)
    Background of your issue:
    If you simply drag your video file(s) from the Aperture window to the Desktop (in my case a MP4 from my Galaxy Nexus, the original having 70 MB), Aperture does not copy the master or the version file, but instead it creates a reference movie file, which is a very small video container file (in my case: MP4, 26 KB) with no AV-content but only a reference to your master video file in your Aperture library, ~/Pictures/Aperture Library.aplibrary/Masters/YYYY/MM/DD/YYYYMMDD-hhmmss/filename.
    So by principle it acts like an "alias", but technically it is not a filesystem alias (filepath, ID within filesystem (inode), metadata), but a so called reference movie. If you meanwhile deleted/manipulated the master file from the Aperture Library, or changed something from the filepath (volume name, home directory name, etc) import in Final Cut Pro will fail of course, as it loads a mere reference movie, and fails to load the AV-content, as the master movie file cannot be found at the given filepath anymore.
    Solution 1 (for the "tidy" users):
    Make sure the filepath to your Aperture Library does not change (volume name, user name, custom library name), and hopefully Apple does not change their Aperture Library filepath scheme in future updates. Then the reference movie will remain pointing to a valid master file.
    Solution 2:
    In Aperture, select the file(s)
    File > Export Master (CMD-SHIFT-S)
    Save file(s) to your desired destination
    Import them into within Final Cut Pro
    Of course this creates unnecessary duplicate content, which is specially painful with video files, which tend to be large.
    Solution 3 (advanced users):
    Locate the master file (within the Aperture Library.aplibrary bundle) and import that in Final Cut Pro.
    The import dialogue of many Mac OS X apps does not allow browsing into bundles.
    A possible work around is to open the bundle in Finder (right click > Show package contents), locate the file, and then drag'n'drop it onto the import dialogue of Final Cut Pro.
    Message was edited by: putzfetzenORG. Added post title.

  • Aperture 3.0.1 Problem with Importing Images

    The problem I am experiencing with Aperture 3 is that often when I am trying to import images to a project, the images "do not show up" in the import window. In other words, Aperture doesn't "see" the images I am trying to import.
    Here's what I mean, I might have photos on a CF card or on a hard drive which I would be trying to add/import into a project. Sometimes but not all the time, when I select the folder or location where the files are that I am trying to import, no files show up! These are just regular JPEG files. I know they are there because if I look with OS X's Finder, the images are all there. As well, sometimes if I quit Aperture and restart it all over again, the images that I want to import now show up in the import window.
    This problem doesn't change either whether I click on the "do not import duplicate" box or not. Although as a side note, this "do not import duplicate" function doesn't seem to be reliable either.
    Does anyone have any suggestions regarding what I can do to fix this? Can I "reinstall" Aperture? How do I do this? Is this something I can fix by rebuilding the library?

    I didn't even realize that I too had this issue until I came upon this thread. I went into my Import window, selected my hard drive and only the folder structure would show - no images corresponding to those within the folders would appear in the window above.
    Odd, though, all I did was uncheck the 'Do not import duplicates' box and suddenly the images now appear, and continue to appear after a relaunch of Aperture. I've since rechecked the duplicates box but the images still appear.
    I don't know if it's related to the initial toggling of the duplicates button or not. Nor do I know if the problem will appear sometime later, but I do know it was/is an issue.

  • Problem with importing images shifting text

    Hi,
    I custom designed a heading and menu on a blank page, and then I added images for a slide show (hyperlinked each one with next previous). My logo or heading is in the exact same place but when you go from one page to the next it giggles/or looks like it's shifting (this looks horrible when you are going through the images). The images are PNG and not very big in size (approx. 380 pixels by 580 at 72 DPI). The text shifting problem does not happen if the images are shrunk or kept at a really small size. I've tried everything I can think of and it def. has to do with the images being a certain size, but it does not make sense as I should be able to work with images that are this size -- they are not even very big to begin with! Any help would be so greatly appreciated. THanks!
    Best,
    Corinne

    you appear to be a mac genius
    Thanks for the compliment but mostly I just regurgitate what I've learned here. Regarding the image size I don't think you need to do anything. The only set of photos that are jpgs and can be downloaded are those in the Mollen and Drew section. The rest of them are java based and cannot be downloaded, only obtained via a screen capture. I don't know what you did differently for Mollen and Drew's page but it is different from all the others in that first gallery. However, the other pages can take the view to the overall gallery were the links to Blank # are visible. The few pages I visited of those, Blank 34 and 41 had jpgs for the large view that could be downloaded. Is that what you want? If so you might consider putting a watermark on the photos. This example was done with Photoshop but there are 3rd party applications that can automate the process, putting any text or icon on the photo in the location of your choice. iWatermark is just one of several. You can find them at VersonTracker.com.
    The current iWeb converts the photos to 800 x 600 and uses java for the slideshow and gallery. This makes it more difficult to download a photo. A viewer would have to make a screenshot of it in order to get a copy.
    Of the five one your gallery page only Mollen and Drew are of the type of page that has jpgs as the larger image. How was that page created as opposed to the one for Georgeen and Tobias. They are two different types of photo/slideshow pages.
    OT

  • Problem with capture image from wc

    hi all, i want to capture image from my webcam and play it, but it's not work
    please help me, here's code
    public class Demo extends JFrame {
          * @param args
         public static void main(String[] args) {
              // TODO Auto-generated method stub
              Demo demo = new Demo();
         public Demo() {
              super();
              int a=30;
              final JPanel panel = new JPanel();
              getContentPane().add(panel, BorderLayout.CENTER);
              setVisible(true);
              DataSource dataSource = null;
              PushBufferStream pbs;
              Vector deviceList = CaptureDeviceManager.getDeviceList(new VideoFormat(null));
              CaptureDeviceInfo deviceInfo=null;boolean VideoFormatMatch=false;
              for(int i=0;i<deviceList.size();i++) {
              // search for video device
              deviceInfo = (CaptureDeviceInfo)deviceList.elementAt(i);
              if(deviceInfo.getName().indexOf("vfw:/")<0)continue;
              VideoFormat videoFormat=new VideoFormat("YUV");
              System.out.println("Format: "+ videoFormat.toString());
              Dimension size= videoFormat.getSize();
              panel.setSize(size.width,size.height);
              MediaLocator loc = deviceInfo.getLocator();
              try {
                   dataSource = (DataSource) Manager.createDataSource(loc);
                   // dataSource=Manager.createCloneableDataSource(dataSource);
                   } catch(Exception e){}
                   Thread.yield();
                   try {
                        pbs=(PushBufferStream) dataSource.getStreams()[0];
                        ((com.sun.media.protocol.vfw.VFWSourceStream)pbs).DEBUG=true;
                        } catch(Exception e){}
                        Thread.yield();
                        try{dataSource.start();}catch(Exception e){System.out.println("Exception dataSource.start() "+e);}
                        Thread.yield();
                        try{Thread.sleep(1000);}catch(Exception e){} // to let camera settle ahead of processing
    }

    iTool wrote:
    hi all, i want to capture image from my webcam and play it, but it's not workThat's a very descriptive error message, "it's not work". Everyone on the board will certainly be able to help you out with that.
    The first error I see is that you're using the CaptureDeviceManager in an applet. If T.B.M pops in here, he can tell you why that's going to be a CF 99% of the time.
    The other error I see is that your code looks absolutely nothing like any working JMF webcam capture code I've personally ever seen.
    Lastly, the big one, even if you were somehow capturing video magically, you're not even trying to display it...so I'm not entirely sure why you expect to see anything with the code you just posted.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.html]
    Your best bet would be starting over and using the example code from the page linked above.

  • Problem with importing movies from my Sony HDR-SR5

    Having trouble importing movies from my Sony HDR-SR5. The computer is reading HD camcorder but Iphoto is coming up and not Imovie. I don't have any still pics and SD movies. When I go into imovie camcorder does not show up. Any suggestions?

    Did your "Camcorder" ever worked with iMovie? If so, what version were your running?
    What version of iMovie are you currently running: iMovie 8.0.5 or iMovie 8.0.6?
    What version of the OS are you currently running: 10.6.2 or 10.6.3?

  • Problem with deleting images from iPhone with Mac

    When I connect my iPhone 5 to macbook pro Image Acquire opens. I want to delete all images of my iPhone but with it (Image Acquire) I can't because  the delete button is disabled. Why? Maybe because I noticed a locker near the images? Don't know, can help me?

    Image Acquire or Image Capture?
    Launch Image Capture located in your Applications folder.
    Make sure your iPhone is turned on then connect the iPhone to your Mac.
    Make sure the iPhone is selected under DEVICES.
    See if: Delete after import   is available now.

Maybe you are looking for