Problem with index in merged projects

Dear Sir,
I have a problem with index in the master project, I can only
view the master project index keywords under the index tab. My
master project contains 2 topics besides the other sub projects. I
have created index for all sub projects indvidually and at the end
I created the master project index.
I made sure that the 'Binary Index' flag is ticked before
compilation and stil the problem is on, do somebody know what could
be the problem.

Hi,
Two points here.
Firstly, you can duplicate SSL's. (Right click on an SSL in
the projects sub-directory and select the duplicate layout option.
This will give you a copy of the original SSL).
I tend to have two SSL's - one is local and I use that every
time I test compile the project when I'm working on it.
The other is set to output to the master project. I use that
once I'm happy with the sub-project and start working with the
master project.
Second point is to be aware of how RoboHelp treats the
imported/merged .chm files from the sub projects.
It imports them into the main project master directory - then
when the master project is compiled it puts a copy of them into the
master project SSL. However, if you re-compile it doesn't overwrite
the files that are already in the master project SSL directory.
This is why you have to be aware of where the sub project
.chm files are going - you need to make sure that if you revise the
sub projects, a fresh copy of the .chm files ends up in the output
SSL directory of the master project.

Similar Messages

Problem with the% deviation from Project Server 2010 field

hello
I have a problem with the% deviation from Project Server 2010 field.
Within a file or project, this project contains tasks.
Each task has completed the field% deviation.
Within the row "Summary" in the field of% deviation does not perform the sum of all fields of tasks.
Only occurs on certain projects, these projects have the view of PR Progress Report
Anyone know happens?
thank you very much

Hi
Sorry, I'll be more specific now.
Within the field% deviation. Your settings in PWA is:
The formula for field% Deviation:
Str (IIf ([Job baseline] = 0; IIf ([Working] = 0, 0, 100); IIf ([Working] = 0; -100; Int (100 * ([Job] - [Work Online base]) / [Working baseline])))) + "%"
Under the heading rows Calculation Summary:
> Use formula.
Within the field Allocation Calculation of rows:
> It is labeled the "Apply unless you manually specify".
The field [Job] and field [Job baseline] are fields Pack project server.
The error is in project, in the list of tasks.
In the top row, this row summary makes the sum of the ranks of the tasks of the file.
But in my case only in the summary field the same value appears in the tasks.
In all the cells in column% deviation appears the same value.
I hope it helps.
thank you very much

Pages '09 problem with index

Hi all,
So this is my problem, i'm editing ePub to publish in the Apple iBooks Store, and do them with Pages, but i've big problems with index
i'm using personal styles (as i change chapter colors, font size)
in "old Pages" i could not do index as it was telling me i was not using none of the style in index (even with my proper styles markeds, now when i create index in the style box my styles doesn't show soo it can't create index)
In Pages '09, i have no problem to create index, the problem is when i export to ePub it does not show it
or when it was shoing it, in the normal index, i could also see it in the book as a normal page, and i want it only in the normal ebook index.
any suggestions?
thanks for your help
(if answer can be from Spanish person in Spanish, beter, than beter, but English or french answer welcome too )
have nice .... what ever it is for you.

more or less i got it (after trying, and trying)...
i used the template from apple: http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
then i make my peronal style using the color i whant for chapter title... this is ok
but still hane the enoying index as normal page....(pic 1) only what pic 2
if i find a solution, will post it, if you find it, and also how to change the color of the index text (it is supposed to be change to black...)
I'll apreciate the help.
thanks again, and have nice day

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Problem with index.html. Help!

I am having a problem with the index.html. In iWeb my site looks perfect. When I publish it to a folder and then open the index certain media is missing but just on one page.
I have tried deleting the published site from the folder and re-publishing but nothing seems to work. Same result...
Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased. What could cause the change? I didn't upload a new version of the site.

Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased.
Please provide your url so we can see what is happening.
The index.html file plays no role in what you are describing.

Problem with Matching and Merging Step of MDM Workflow

Hi,
I have created a workflow which will first Match Step where the user will do both
Matching and Merging. Then, it will go for a process step Final Review.
Then, it will go for Branch step which is named as Decide on Check in.
There are two workflow which are launched after this step.
My workflow ran one time.
The number of records is: 19585. The Match step which is assigned to a different user is not performing.
It is a simple match based on First Name, Middle Name and Last Name.
Any suggestion?
Regards
Kaushik Banerjee

Hi Kaushik,
What do you mean with "not Performing"? One suggestion, just log in with the 'Different User' who has been assigned for the matching task, and under that user goto the matching tab, in matching tab you will find a sub tab for Workflow, I hope you can work from there, If this doesnt solve your problem, then please let us know.
Cheers,
Cherry.
Sorry problem with button;... so message came again... apologize.....
Edited by: Cherry on Mar 23, 2009 9:42 PM

Problem with starting JHeadstart Enable Project Wizard

Hi,
Ive got small problems with JHeadstart (10.1.3.0.95) at Win2k, JDev (10.1.3.1.0.3984). After adding all DB related stuff to new application project Im trying to use function "JHeadstart Enable Project Wizard" from right-click context menu available under "ViewController". And here comes all my headache - after first warning screen Im going to the next one when the text box is empty and clicking on Finish button doesnt work. I can only click Cancel.
It would be cool to get fast any good advice as Im trying to finish my term project on Monday.

Piotrek,
I tried to reproduce your issue without success.
I would be very grateful if you can send us a sample project with the DB tables where the JHeadstart Enable Project Wizard does not work.
You can send the testcase to [email protected], and make sure you rename extension .zip to .zipped, otherwise the mail is refused by our mail server
Thanks!
Steven Davelaar,
JHeadstart Team.

PC issue.--Problem with index step.

Hi
Today our two chains are failed at loading ..
source is R/3 & update mode is delta.
Iam corrected the error and loaded the delta again useing repeat option,in cube request showing repeat of last delta.In monitor screen overall status is green but Total status showing is RED.But in cube it is showing green.loaded fine
For one chain when iam click on repeat on loading step ,it is loaded data fine into cube ,but unfortunately deleting index turned into yellow looking like execuating .This index step avalible on top of the loading step. before index step executed fine, load step is failed.when iam clck on repeat it is went to executing index step. I donot no why..but it is still showing yellow...
Now my question is, weather chains run tommrow with out any problem with deltas..? because chain still showing red colour.
Thanks
Bk

Hello Krishna Rao
I will explain clearly we have one PC haveing say 5 steps.1 2 3 4 5.
Third step is Deleting Index and Fourth step is Loading into cube.
Today our chain is failed at fourth step.Iam corrected the error and clicked on the repeat ..loading into cube done fine
But strangely in went to Third step to execute. that is still in yellow colour .But total chain status is showing red.
And also in batch monitor job was finished successfully.But in chain index step showing still yellow..
I think now iam clear for you...
Bk

Problems with grouped and merging layers

Sometimes when I combine layered .pdf files (by dragging pages in or doing Merge Files Into a Single PDF), the layers come in grouped (by file name) and other times they do not. Why is that? Also, is there a way to ungroup layers in Acrobat?
Any help is much appreciated!
For those interested in the background, I have a bunch of layered .pdf files that I want to combine. They were created from a single large Photoshop image sliced into page-sized pieces so the files all have the same layers and the layers are arranged and named the same in every file. I want the combined PDF book to maintain these layers so the user can, with one click, turn on or off a given layer across all pages of the PDF. Clicking on a layer on every page just isn't going to cut it.
I figured I would just combine all of the single PDF pages and then merge all of the layers of a given name so that I end up with just one layer for each type. The problem is that the merging works sometimes and not others. I can't figure out why, but it works far more often when the files combine without the layers grouped. It still doesn't work all of the time, but it NEVER works if the layers come in grouped - so I figure I would start there.
I'm using Adobe Acrobat 9 Pro. I used the method outlined below to turn my layered Photoshop (CS5) files in layered PDF files:
http://www.ehow.com/how_8296095_convert-photoshop-pdf-layers.html

After hours (and hours) of debugging Acrobat, I figured out that as long as the file(s) I drop in are not at the end of the document, then no layer groups are formed - all of the layers in both files are at the top level.
If I drop a file in after all existing pages, then the layers are grouped by file name.
and
If there are layer groups then merging fails. The names of the merged layers disappear from the layer list but the conent is left permanently visible.
If the layers are not divided into groups, then merging works most of the time. I haven't figure out why it occassionaly fails this way too, but so far it's been easy to work around.
This is Adobe Acrobat Pro 9 so no chance of it being fixed - so amybe this will help someone else in the same boat.

Problem with Lighten/Darken Merge

I'm having a problem with the Lighten and Darken blend modes in CS6. Once I merge the layer it gets these weird bands. It is fine until I merge the layers together or export. See pictures:
I have tried different combinations of pictures and have reset Photoshop's settings. I've never have this problem before.
Thank you,
Benjamin

Figured out it's an issue with the lens profile corrections in both Lightroom and Camera Raw. More specifically, distortion correction.
Banding in Photoshop when using blend mode of lighten or darken, and ACR & or Lr
Banding pattern when using profile corrections in Camera Raw and Lightroom
Benjamin

Problems with Indexing and Classification

hi KM Gurus,
We faced some problems in Indexing and Taxonomies for which I would like to know the solution/reason.
(1) We tried providing query based classification in which the query condition which is based on the "Content" alone worked for us. Whenever we tried specifying conditions based on "file extension" or "title", it didn't work out. Did that work for anybody else?
(2) Also we are not able to get any proper info about the various options that are available while creating a query based classification. For example, there are two options like "title" and "string title". But we donno the difference b/n the two. If it works out we can find the difference. But it is not working too. So we are not able to find the difference between the two.
(3) And I tried setting the crawler parameter of my own instead of the standard crawler. But the index was found to be inactive when i set that to my crawler and it worked fine with the standard crawler. I am not able to make it active. Any clues behind this?
Expect all your guidance and help.
best regds,
alagammai.

Hi Alagammai,
concerning issues (1) and (2).
Normally the mentioned properties are displayed as 'Name' and 'Namme as String'.
These two properties are(in most cases) the title of the document.
One is indexed in 'Text' format. The other one in 'String' format. That results into different opportunities within the query based classification.
'Displayname as String' can be used to sort documents alphabetically: A, B, ... into categories.
'Displayname' allows you to do a linguistic scan on document titles.
To separate file types I would use the property MIME-Type.
But you may try to define a query *.doc for the property 'Name as String'.
Regards Matthias

Problem with Task Aggregation from Project Server with old Project Server permissions mode.

Hi, I have installed Sharepoint 2013 with all CU, and Project Server 2013 with June CU update. Later, I attached database from old Project Server 2010 database, all was OK, but now I have my PWA with old Project Server permissions mode.
After that I have created MySite with users from AD of my company, it's OK, but Task Aggregation not working. Moreover, I have not any errors on the MyTask page.
You can see that I can insert private tasks, but I can not see any tasks from pwa, however I have a lot of tasks there. Please help me.
My search works well amd WMA Service too.
Where directly crawler search the tasks? Maybe there are errors in search log with that ulrs?

Hi,
did you setup the Work Management Service Application in the Central Administration? If yes, please check if the Applicationpool account of the Work Managment Service has full Access to the User Profile Service Application (over the Ribbon | Permissions).
Check also if your Projects are published so that you have a Project Workspace for each Project. In the workspaces you should have a list "Tasks" or "Tasks1" for migrated workspaces. This is important because only Tasks from the workspaces' Tasklist are
shown in the Mysite
In any other cases please check the ULS Log and/or the Application Event log. Especially have a look to Distributed Cache Service and the Feed Cache.
Bernhard Fischer [MVP] | www.wodey.de

Problems with indexing

Hi, I recently encounter a problem with my spotlight.
I can' t find any files when i Type something ( for example iTunes nothing appears).
Well, I've tried all the solutions proposed over the the net:
.Drag the Volume on the privacy tab then remove it
.Use command in terminal.
.Delete the spotlightv100 folder.
The results are the same...it reindexes, but it takes 1 minute
to reindex; I don't think 1 min is enough to reindex a 60gb hard drive.
Thanks for the Help

I've noticed it because each time I requested something in the spotlight ( for exemple I typed the letter F or T )the spotlight proposed me files only from Adobe folder so I thought the problem came from this folder.Then I searched on forums if a file could be a problem and i've noticed people having a problem with this file called XXXviet.html ( i don' t remember the name exactly). So i've deleted and now all is ok.

Any problems with LE8 handling LE7 projects?

Hi,
I'm still considering the upgrade. One of the things I've been hearing on the Pro 8 forums is that people have been having problems working on their L7 projects in L8. Any comments?

Thanks very much, you’ve really help. I think I will buy this camera. Just a couple of others points though.
The AG-DVX100B has three modes for shooting 16:9: conversion lens, AG-LA7200G; Letterbox, which I think is just chopping off the top and bottom of a 4:3 image; and squeeze mode, which squeezes the pixels, am I right in thinking this loses resolution? (refering to another thread). None of these are true anamorphic 16:9, of course. So which mode would you recommend? The conversion lens retails for about £700.
One other thing, the camera claims to cover a full wide angle lens range: extending to 4.5mm. I’m just quoting the manual now. Has anyone found the need to use a wide angle conversion lens, and if so what brand, century?
Thanks for all your help
1.5 Ghz PowerbookPC G4 Mac OS X (10.4.7)

Problem with Indexer

Hi,
i am trying to develop a small search engine... currently i am trying to develop STOPLIST..... which iterates through piece of text and extracts different words and their respective frequencies... here is the piece of code which does this :
======================================
for( int c=0; c < lines.size(); c++) {
temp = lines.elementAt(c).toString();
temp = temp.toLowerCase();
st = new java.util.StringTokenizer(temp);
while( st.hasMoreTokens())
words.addElement(st.nextToken());
for( int b=0; b < words.size(); b++) {
extractedWord = words.elementAt(b).toString();
for( int a=0; a < words.size(); a++) {
if( words.elementAt(a).toString().equalsIgnoreCase(extractedWord))
extractedWordFreq++;
extractedWords.addElement(extractedWord);
extractedWordsFreq.addElement(Integer.toString(extractedWordFreq));
extractedWordFreq=0;
for( int z=0; z < extractedWords.size(); z++)
System.out.println("Extracted Terms : " + extractedWords.elementAt(z).toString() + " Freq : " + extractedWordsFreq.elementAt(z).toString());
========================================
the only problem with above code is that .... it takes a long time to
execute... around 30 seconds....
Here is the spec of my pc :
P4 : 512 MB RAM
The piece of text has around 7500 words
when i execute this code... and look at my Windows Task Manager....
CPU usage goes to 100 %.....
All I wanna know is that ... is there any way to change this code so that it executes more swiftly.....
thanx in advance
have fun

Hi
I read your previous reply: Vector, Array, StringTokenizer, etc. They are "heavy weight" not concerning to peformance so your code uses brute force.
I found an example dealing with this issue and I believe to be faster than your but you must to modify details:
import java.io.*;
import java.util.TreeMap;
import java.util.Iterator;
public class WC {
public static void main(String args[]) throws IOException {
    if (args.length != 1) {
      System.err.println("Usage: java WC <textfile>");
      System.exit(10);
    File file = new File(args[0]);
    StreamTokenizer stream = new StreamTokenizer(
                                   new FileReader(file));
    // treat any punctuation as word delimiters
    stream.whitespaceChars('!', '/');
    stream.whitespaceChars(':', '@');
    WordFrequencyCounter wfr = new WordFrequencyCounter();
    String word;
    int countNumbers = 0;
    while (stream.nextToken() != StreamTokenizer.TT_EOF)
      if (stream.ttype == StreamTokenizer.TT_WORD) {
        word = stream.sval;
        wfr.count(word);
      else if (stream.ttype == StreamTokenizer.TT_NUMBER) {
        countNumbers++;
    System.out.println("File: " + args[0] + " (" + file.length() + " bytes)"
                       + "\n#lines = " + stream.lineno()
                       + "\n\n#words = " + wfr.size()
                       + "\n#numbers = " + countNumbers + "\n");
    for (Iterator it = wfr.keySet().iterator(); it.hasNext();) {
      word = (String) it.next();
      System.out.println(wfr.frequency(word) + " " + word);
class WordFrequencyCounter extends TreeMap {
// first see if this word has already been encountered;
// if not, then create a fresh counter for it;
// otherwise, increment its counter
public synchronized int count(String word) {
    Integer counter = (Integer) get(word);
    counter = (counter == null) ? new Integer(1)
                  : new Integer(counter.intValue() + 1);
    put(word, counter);
    return counter.intValue();
// find out how many times this word has been encountered
public synchronized int frequency(String word) {
    Integer counter = (Integer) get(word);
    return (counter == null) ? 0 : counter.intValue();
}Regards.

Problem with index in merged projects

Similar Messages

Maybe you are looking for