Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Similar Messages

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

  • Problem with installing and using elements13

    First media is up, then it says please wait, then Elements 13 organizer has stopped working.  Then my windows is collecting info and will notify me when a solution is available and it never does!
    Then if it is running, I cannot get editor to load and work.  It asks again for my id and password, then nothing happens!
    Please somebody help!
    Thanks, Rich

    You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
    I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
    Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

  • How to fix problem with installed and working add-ons disappearing after update to 20.0.1?

    I updated to version 20.0.1 of Firefox the other day. I had the theme Qute 3++ 1.19 installed and it took 3 restarts of the browser before it kicked in and worked again, for some reason.
    Then I noticed that my MillBar Community toolbar 3.18.0.7 had disappeared, which I use for the feature of collecting my email accounts to get fast notifications about new emails. Also my Adblock Plus 2.2.3 seems to not be working because all of a sudden I see ads everywhere and I also discovered a bunch of pop-ups from nowhere. I used these add-ons for such a long time that I was shocked.
    When i went to type a message to a friend, I also noticed that my american-english dictionary/spellchecker was not working.
    The first thing I checked was that none of these add-ons was inactivated or said to need updates. The dictionary had disappeared, so i re-installed that. I also reinstalled Adblock Plus. Still it doesn't work.
    When i entered the email information into the toolbar options, it collects my emails for a while, but suddenly it stops and the information is not there anymore. If I restart the browser it also disappears.
    Same thing with the dictionary. it works for a while, and then suddenly it's like it's disabled.
    And the add-ons are still in what seems like working conditions in my lists. No errors that I can see, no updates available.
    I'm really at a loss as to what to do, I've never had problems like this before that couldn't be solved with an update of the add-on. So I'd be very grateful for help with this and hope that I have provided enough information.

    this help is not useful.
    Since the new firefox version 20.0.1, '''no more of my add-ons work''' (except firebug ). They are installed '''but not visible '''(no toolbar, no menus) !!! same for the new add - ons that I installed. I tried everything: to reinstall add-on, to reinstall firefox.
    this new version of firefox is really horrible, '''thank you for making a corrective because I cannot work any more with'''

  • Problem with Installing and Configuring MS Server 2012 Essentials trial and MS Server 2012 Standard trial

    My name is John Grace.  I have been an MS customer for years.  Never before in my experiences with MS up to this point have I experienced such POOR product support.  Your pre-sales agents have no knowledge to offer with pre-sales config or
    install issues, your support personnel are trained not to provide any reasonable help with even minor questions and concerns helping to make sure your trial experiences are progress and successful, your product support Mgrs show lack luster concern if you
    need some technical direction.  The first thing that is asked is do you have a support contract or credit card for this session.  Now, if I am evaluating products a support contract should not be necessary as you should want customers to have good
    outcomes with their trials.
    I have been trying to configure test servers with the above mentioned products for the past 6 days with no success.  Each install is different and the configurations some times work and some times they don't.  I reach out for help in your forums,
    etc., and am still at square one.
    This frustrating and breeds a lack of confidence in your organization.  When Bill Gates was in charge I experienced none of the nonsense today. 
    I have identified bugs and issues to your product teams and they gladly accept these.  But when help is needed...it is send us an email type attitude.  I have 8 8 core servers running  windows 2008 server R2 slated for upgrading to windows
    2012 server, and more after that.  If I don't get the trial software to work, the upgrades are terminated.
    Please give me some help or you will loose me as a customer, and customers that I installed systems for.
    John Grace
    (937) 286-4912
    John Grace

    Hi again Alan,
    Thanks for the reply, i have however not been able to find any viable hotfix from MS addressing this problem so far. I only found the QFE for 2008 R2, but this is not applicable in my enviroment.
    Sadly, we are experiencing the same issue with the 2008 R2 server as print server now. So the problem seems to be with the 2012 R2 RDS servers.
    We have been able to narrow it down to a probable cause though:
    The issue seems to be the cause of Client Side Rendering, even if it is disabled on the shared printers. We are seeing heavy bloating in the registry:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider
    The same printers are listed multiple times in subkeys for each user-SID.
    The print server is listed twice under the 'Servers' key, once with just the hostname and once with the fqdn. Benath these two many of the printers are also listed multiple times.
    Consequences are that printers are showing as clones for the users and they cannot set them as default printer. If they remove the printer manually, it just reappears. Setting a delete on the shared printer through GPP does not work either.
    The only manual workaround we have found working is to delete the entire "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider" key on the
    terminal server in question, and then restart the print spooler. This fixes the problem for the user, but once they start logging off and on again, the bloating of the registry is at it once more - and the problems following with it.
    In an enviroment with 70+ printers and 15 RDS servers, spread on 3 different farms, it's not a good solution though.
    Any ideas?

  • Anybody has any problems with installing and printing with canon lbp6650dn?

    hi,
    i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
    computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
    thanks!

    Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
    You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
    Message was edited by: First Magus

  • Problems with installing and activating and older version of Creative Suites

    Hi. I'm using a MacBrook Pro with Max OS 10.6.8 and am trying to install an old version of Adobe Creative Suite (2 Premium) that I have.  I got through the whole installation process yesterday, but was unable to activate it.  I had to quit without going further. This morning, I read through the info that comes with the program and it looked like I would need to reinstall everything, because I stopped before activation. When I inserted the 1st disk, it did not load right and got stuck.  I had to forcibly eject it.  However, Disks 1-4 are still loaded on my computer.  I have 3 questions:
    Can the older programs no longer get activated?
    If they CAN, how do I get from the info loaded under my Applications folder to the activation?
    Alternatively, since I stopped before activation and hit "quit" rather than "cancel," do I have to start the whole process all over again from the beginning?
    Thanks for any help you can give me!

    Put your CS2 disks away (since they can no longer be used) and follow these instructions from Adobe
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    Hi, so did I.  It seems to be a huge problem with everyone.  I opened a folder on desktop and called it target.  I copied all my songs into that folder.
    I uninstalled Itunes completely.  Rebooted.  Then I installed a fresh install.
    I then dragged all the songs back to Itunes and it worked.  I hope that helps. 
    I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
    Good luck,

  • Problem with installing/uninstalling Adobe AIR on Windows 7 x64

    I encounter problem while trying to do anything with AIR. I cannot uninstall Adobe AIR using default uninstaller or install any AIR software because the message "This application requires a version of Adobe AIR which cannot be found" is popping up.
    I tried to remove Adobe AIR with Revo Uninstaller and installing the AIR again but it didn't help. Revo Uninstaller removes all files and registry entries successfuly. After such reinstalation of Adobe AIR all the files in c:\Program Files (x86)\Common Files\Adobe AIR seems healthy and registry entries are added as well.
    I tried Microsoft Install and Uninstall Fix It tool, Windows Install Clean Up - didn't work.
    My whole log is below, I did a couple of trial today (2013-02-08).
    My AIR log (Install.log file):
    [2012-10-02:16:43:57] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2012-10-02:16:43:57] Commandline is: -silent
    [2012-10-02:16:43:57] No installed runtime detected
    [2012-10-02:16:43:57] Starting silent runtime install. Installing runtime version 3.2.0.2070
    [2012-10-02:16:43:57] Installing msi at c:\users\rafal\appdata\local\temp\airb76c.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2012-10-02:16:43:58] Runtime Installer end with exit code 0
    [2012-10-03:09:30:21] Runtime Installer begin with version 3.4.0.2540 on Windows 7 x86
    [2012-10-03:09:30:21] Commandline is:
    [2012-10-03:09:30:21] No installed runtime detected
    [2012-10-03:09:30:37] Relaunching with elevation
    [2012-10-03:09:30:37] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air6384.tmp\adobe air installer.exe -ei
    [2012-10-03:09:30:37] Runtime Installer begin with version 3.4.0.2540 on Windows 7 x86
    [2012-10-03:09:30:37] Commandline is: -stdio \\.\pipe\AIR_8416_0 -ei
    [2012-10-03:09:30:37] No installed runtime detected
    [2012-10-03:09:30:37] Starting silent runtime install. Installing runtime version 3.4.0.2540
    [2012-10-03:09:30:37] Installing msi at c:\users\rafal\appdata\local\temp\air6384.tmp\setup.msi with guid {14DC0059-00F1-4F62-BD1A-AB23CD51A95E}
    [2012-10-03:09:30:40] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2012-10-03:09:30:40] Rolling back install of c:\users\rafal\appdata\local\temp\air6384.tmp\setup.msi
    [2012-10-03:09:30:40] Rollback complete
    [2012-10-03:09:30:40] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2012-10-03:09:30:40] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2012-10-03:09:30:40] Runtime Installer end with exit code 7
    [2012-10-03:09:30:50] Runtime Installer end with exit code 7
    [2012-10-05:12:40:20] Runtime Installer begin with version 2.5.1.17730 on Windows 7 x86
    [2012-10-05:12:40:20] Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
    [2012-10-05:12:40:20] No installed runtime detected
    [2012-10-05:12:40:21] Invoking Application Installer for combined install
    [2012-10-05:12:40:21] Launching subprocess with commandline C:\Users\Rafal\AppData\Local\Temp\AIRF2C.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Rafal\AppData\Local\Temp\AIRF2C.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Rafal/Desktop/Adobe%20Flash%20Builder%204.6%20Installer/Adobe%20Flash%20 Builder%204.6/payloads/AdobeHelp/AdobeHelp.air
    [2012-10-05:12:40:22] Application Installer begin with version 2.5.1.17730 on Windows 7 x86
    [2012-10-05:12:40:22] Commandline is: -runtime C:\Users\Rafal\AppData\Local\Temp\AIRF2C.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Rafal/Desktop/Adobe%20Flash%20Builder%204.6%20Installer/Adobe%20Flash%20 Builder%204.6/payloads/AdobeHelp/AdobeHelp.air
    [2012-10-05:12:40:22] No installed runtime detected
    [2012-10-05:12:40:22] Unpackaging file:///C:/Users/Rafal/Desktop/Adobe%20Flash%20Builder%204.6%20Installer/Adobe%20Flash%20 Builder%204.6/payloads/AdobeHelp/AdobeHelp.air to C:\Users\Rafal\AppData\Local\Temp\fla2386.tmp
    [2012-10-05:12:40:26] Application signature verified
    [2012-10-05:12:40:26] Unpackaging/validation complete
    [2012-10-05:12:40:26] Converting unpackaged application to a native installation package in C:\Users\Rafal\AppData\Local\Temp\fla2FC7.tmp
    [2012-10-05:12:40:26] Native installation package creation succeeded
    [2012-10-05:12:40:26] Starting silent combined runtime and app install.
    Installing runtime version 2.5.1.17730.
    Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.4.980 to C:\Program Files (x86)\Adobe using the source file at file:///C:/Users/Rafal/Desktop/Adobe%20Flash%20Builder%204.6%20Installer/Adobe%20Flash%20 Builder%204.6/payloads/AdobeHelp/AdobeHelp.air
    [2012-10-05:12:40:26] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: App already exists" errorID=5007]
    [2012-10-05:12:40:26] Application Installer end with exit code 7
    [2012-10-05:12:40:27] Subprocess app installer failed (7)
    [2012-10-05:12:40:27] Runtime Installer end with exit code 7
    [2012-10-25:12:14:44] Runtime Installer begin with version 3.4.0.2710 on Windows 7 x86
    [2012-10-25:12:14:44] Commandline is:
    [2012-10-25:12:14:44] No installed runtime detected
    [2012-10-25:12:14:54] Relaunching with elevation
    [2012-10-25:12:14:54] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air6480.tmp\adobe air installer.exe -ei
    [2012-10-25:12:14:54] Runtime Installer begin with version 3.4.0.2710 on Windows 7 x86
    [2012-10-25:12:14:54] Commandline is: -stdio \\.\pipe\AIR_2996_0 -ei
    [2012-10-25:12:14:54] No installed runtime detected
    [2012-10-25:12:14:58] Starting silent runtime install. Installing runtime version 3.4.0.2710
    [2012-10-25:12:14:58] Installing msi at c:\users\rafal\appdata\local\temp\air6480.tmp\setup.msi with guid {14DC0059-00F1-4F62-BD1A-AB23CD51A95E}
    [2012-10-25:12:15:00] Runtime Installer end with exit code 0
    [2012-10-25:12:15:00] Elevated install completed
    [2012-10-25:12:15:03] Runtime Installer end with exit code 0
    [2012-10-25:12:18:07] Runtime Installer begin with version 3.4.0.2710 on Windows 7 x86
    [2012-10-25:12:18:07] Commandline is:
    [2012-10-25:12:18:07] No installed runtime detected
    [2012-10-25:12:19:31] Runtime Installer end with exit code 6
    [2012-11-16:14:10:15] Runtime Installer begin with version 3.5.0.600 on Windows 7 x86
    [2012-11-16:14:10:15] Commandline is:
    [2012-11-16:14:10:15] No installed runtime detected
    [2012-11-16:14:10:30] Relaunching with elevation
    [2012-11-16:14:10:30] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air32a9.tmp\adobe air installer.exe -ei
    [2012-11-16:14:10:30] Runtime Installer begin with version 3.5.0.600 on Windows 7 x86
    [2012-11-16:14:10:30] Commandline is: -stdio \\.\pipe\AIR_7936_0 -ei
    [2012-11-16:14:10:30] No installed runtime detected
    [2012-11-16:14:10:30] Starting silent runtime install. Installing runtime version 3.5.0.600
    [2012-11-16:14:10:30] Reinstalling c:\users\rafal\appdata\local\temp\air32a9.tmp\setup.msi
    [2012-11-16:14:10:30] Runtime Installer end with exit code 0
    [2012-11-16:14:10:30] Elevated install completed
    [2012-11-16:14:10:44] Runtime Installer end with exit code 0
    [2012-11-17:12:59:00] Runtime Installer begin with version 3.5.0.600 on Windows 7 x86
    [2012-11-17:12:59:00] Commandline is:
    [2012-11-17:12:59:00] No installed runtime detected
    [2012-11-17:12:59:02] Relaunching with elevation
    [2012-11-17:12:59:02] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air1e3d.tmp\adobe air installer.exe -ei
    [2012-11-17:12:59:03] Runtime Installer begin with version 3.5.0.600 on Windows 7 x86
    [2012-11-17:12:59:03] Commandline is: -stdio \\.\pipe\AIR_6276_0 -ei
    [2012-11-17:12:59:03] No installed runtime detected
    [2012-11-17:12:59:03] Starting silent runtime install. Installing runtime version 3.5.0.600
    [2012-11-17:12:59:03] Reinstalling c:\users\rafal\appdata\local\temp\air1e3d.tmp\setup.msi
    [2012-11-17:12:59:03] Runtime Installer end with exit code 0
    [2012-11-17:12:59:03] Elevated install completed
    [2012-11-17:12:59:05] Runtime Installer end with exit code 0
    [2013-02-08:17:00:08] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:00:08] Commandline is:
    [2013-02-08:17:00:08] No installed runtime detected
    [2013-02-08:17:00:23] Relaunching with elevation
    [2013-02-08:17:00:23] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\airc5a7.tmp\adobe air installer.exe -ei
    [2013-02-08:17:00:24] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:00:24] Commandline is: -stdio \\.\pipe\AIR_4732_0 -ei
    [2013-02-08:17:00:24] No installed runtime detected
    [2013-02-08:17:00:24] Starting silent runtime install. Installing runtime version 3.5.0.1060
    [2013-02-08:17:00:24] Installing msi at c:\users\rafal\appdata\local\temp\airc5a7.tmp\setup.msi with guid {1798D459-6B8B-474B-868D-1229EADA3B95}
    [2013-02-08:17:00:28] Runtime Installer end with exit code 0
    [2013-02-08:17:00:28] Elevated install completed
    [2013-02-08:17:00:30] Runtime Installer end with exit code 0
    [2013-02-08:17:38:43] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:38:43] Commandline is:
    [2013-02-08:17:38:43] No installed runtime detected
    [2013-02-08:17:39:09] Relaunching with elevation
    [2013-02-08:17:39:09] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air1425.tmp\adobe air installer.exe -ei
    [2013-02-08:17:39:09] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:39:09] Commandline is: -stdio \\.\pipe\AIR_7416_0 -ei
    [2013-02-08:17:39:09] No installed runtime detected
    [2013-02-08:17:39:09] Starting silent runtime install. Installing runtime version 3.5.0.1060
    [2013-02-08:17:39:09] Installing msi at c:\users\rafal\appdata\local\temp\air1425.tmp\setup.msi with guid {1798D459-6B8B-474B-868D-1229EADA3B95}
    [2013-02-08:17:39:11] Runtime Installer end with exit code 0
    [2013-02-08:17:39:11] Elevated install completed
    [2013-02-08:17:39:13] Runtime Installer end with exit code 0
    [2013-02-08:17:48:46] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:48:46] Commandline is:
    [2013-02-08:17:48:46] No installed runtime detected
    [2013-02-08:17:48:49] Runtime Installer end with exit code 6
    [2013-02-08:17:49:38] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:49:38] Commandline is:
    [2013-02-08:17:49:38] No installed runtime detected
    [2013-02-08:17:49:48] Relaunching with elevation
    [2013-02-08:17:49:48] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air16d3.tmp\adobe air installer.exe -ei
    [2013-02-08:17:49:48] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:49:48] Commandline is: -stdio \\.\pipe\AIR_11804_0 -ei
    [2013-02-08:17:49:48] No installed runtime detected
    [2013-02-08:17:49:48] Starting silent runtime install. Installing runtime version 3.5.0.1060
    [2013-02-08:17:49:48] Installing msi at c:\users\rafal\appdata\local\temp\air16d3.tmp\setup.msi with guid {1798D459-6B8B-474B-868D-1229EADA3B95}
    [2013-02-08:17:49:49] Runtime Installer end with exit code 0
    [2013-02-08:17:49:49] Elevated install completed
    [2013-02-08:17:49:51] Runtime Installer end with exit code 0
    [2013-02-08:17:59:04] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:59:04] Commandline is:
    [2013-02-08:17:59:04] No installed runtime detected
    [2013-02-08:17:59:06] Relaunching with elevation
    [2013-02-08:17:59:06] Launching subprocess with commandline c:\users\rafal\appdata\local\temp\air9d57.tmp\adobe air installer.exe -ei
    [2013-02-08:17:59:07] Runtime Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-02-08:17:59:07] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-02-08:17:59:07] No installed runtime detected
    [2013-02-08:17:59:07] Starting silent runtime install. Installing runtime version 3.5.0.1060
    [2013-02-08:17:59:07] Installing msi at c:\users\rafal\appdata\local\temp\air9d57.tmp\setup.msi with guid {1798D459-6B8B-474B-868D-1229EADA3B95}
    [2013-02-08:17:59:08] Runtime Installer end with exit code 0
    [2013-02-08:17:59:08] Elevated install completed
    [2013-02-08:17:59:17] Runtime Installer end with exit code 0

    Help please?

  • How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

    How can I download itunes when I get the following errors  ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
    This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
    Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
    Any help greatly appreciated.
    billymac

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

    after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • "Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

    Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
    “Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

    I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
    1 Uninstall Microsoft office Starter 2010. If
    ‘MS click to run 2010’ doesn't get uninstalled use  Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.       
    2 Download ‘Microsoft Office Starter 2010’ from internet.      
    3 Before launching, right click the executable file and click the 'properties'. Go to
    ‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
    privilege level section.
    4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

Maybe you are looking for