Problem with installing Lightroom 5 on Mac OS 10.8

Hi, i've got a problem with installing the trial version of Lightroom 5 on my mac OSX 8. When using the installing programm there is mentioned a Java script Problem. I use an old CS3 Photoshop Version. Does anybody know how to fix this problem...? Thank you...

Try below steps 
Quit Lightroom
navigate to MAc HD > Library > Application Support > Adobe >  Ligtroom
Delete Lightroom 5 install cookie file
then relaunch and check
it should work.
If you are still facing the issue, uninstall Lightroom 5
redownload it from http://www.adobe.com/support/downloads/product.jsp?product=113&platform=mac
then insall it

Similar Messages

  • Problem with installing Lightroom 2 onto Macbook Pro running OS10.6.8 - any ideas why it will not install??

    To be able to work on my older laptop on location I wanted to install Lightroom 2 onto a MacBook Pro which runs 10.6.8
    It stops at the end of the installment and tells me to contact Adobe for info.... that's nit very easy anyway.
    Has someone a quick clue on where the issue might be?? Thank's a lot already for your help and effort - Tom

    Cannot connect after upgrading Firefox
    * https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
    Firefox cannot load websites but other programs can
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
    Check and tell if its working.

  • Problems with installing CS5 extended

    Hi, I'm in the process of setting up a new computer and had no problems with installing Lightroom but installing photoshop CS5 is proving to be a real pain. At first it refused to install itself and after many hours of trying it finally did but then I found out I needed to update camera raw so I downloaded that but that one now is refusing to install itself. At first it told me the Applications manager needed to be updated so I did that and still it refuses to install itself. I have tried to get help from Adobe but not a single person is responding to my requests for help so I am now trying the forums so does anyone know what is going on with it?
    Thanks!

    Do a search on adobe's site for the specs of cs5 and make sure your system will support it. Also see if your OS is listed as being supported. It is possible that cs5 is too old for your system.
    For  now all we can do is guess. Maybe someone else will have an idea.

  • Problem with installing Elements - from noob

    I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

    Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
    as per this:
    http://forums.adobe.com/message/4474236#4474236

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Problems with installing Xcode through App Store

    Hey guys,
    So trying to install Xcode on my Late 12 Macbook Pro with the ML update for a project with work.
    Everytime I try to install through the app store, I get the Grey Screen of Death. Anyone else having this problem or what could it be? I've had no other problems with installing programs through the App Store.
    I am currently downloading through the developer portal, so hopefully that works.
    Hope someone can guide some light on this.
    Thanks guys!

    Hello,
    For you problem with the Mac App Store you can contact the support here :
    http://www.apple.com/support/mac/app-store/
    (choose Account and Billing; you can change the country at the bottom of the page if you prefer dutch and go back to the support page).
    For your problem with Mail and iCloud you can read this page :
    http://support.apple.com/kb/TS4002?viewlocale=nl_NL (Troubleshooting iCloud Mail).
    Hope this will help.

  • Problems with installing new programs

    Dear all,
    since the update to OS X Yosemite, I have some problems with installing new programs.
    I tried to install the Fitbit App to connect my Fitbit to my Mac but the program can't be started after installation. I have the same problem with Blackberry Blend, too. I am able to install it but it doesn't start running.
    Does anybody have an idea what's the problem?
    Thank You,
    Lisa.

    Did you receive any errors during the installation itself or does this happen when you try to open Photoshop?

  • Problem with installing and uninstalling applicati...

    hi all,
    I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
    Regards
    Alex

    You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
    I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
    Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

  • Problem with installing iTunes

    So these are my problems with installing iTunes.
    At first it was :
    A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
    Then it got worse as it would not even open and these would appear:
    The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
    and this would appear:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I reinstalled maybe about 5 times or more...
    If I thought I solved the above problem, this would appear:
    iTunesHelper.exe is not installed on my computer.
    I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
    And others would say to repair the AAS or iTunes etc..
    And after trying all these it does not work???
    What else works?

    I also tried repairing the Microsoft NET.

  • Problem with Installing Nokia Ovi Store in E51

    I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

    Hi there! 
    This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
    Hope tis' Help! 
    "If you think this post is helpful, please click on the green button"

  • Problem with installing CUCM on MCS-7816-I5

    Hi to all.
    I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5  (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
    I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
    Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
    Here is some details from log file generated with this Firmware Update Utility 3.6.5:
    ==============
    Initial Selection
    Machine Type: 4251 OS: SLES 10 Arch: 64 bit
    IsPartition: 0
    Update:   IBM System x uEFI update for x3200 M3 /3250 M3
    Severity: Critical
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
    Version:  1.08 (GYE142A)
    Install:  1.06 (GYE135A)
    Select:    Yes
    Update:   IBM Dynamic System Analysis
    Severity: Recommended
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
    Requisite:None
    Version:  3.20 (DSYT75X)
    Install:  3.01 (DSYT60K)
    Select:    Yes
    Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
    Requisite:None
    Name:     WD2502ABYS-23B7A0 (/dev/sg0)
    Version:  02.03B07
    Install:  02.0
    Select:    Yes
    Update:   Integrated Management Module Update
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
    Version:  1.22 (YUOO84C)
    Install:  1.10 (YUOO57H)
    Select:    Yes
    IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    LAN-over-USB device not configured.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 3
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    (C) Copyright IBM Corp.2010. All Rights Reserved.
    FdrvWL -- Flash Drive(s)                                     3.10.08.19
       1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
    AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
      0(onBoard)           1       0   0    0          0
                           1       0   0    0          0 Error(s)
    Update completed successfully.  <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    ===========================
    Thanks,
    Sinisa.

    Hi Sinisa,
    It almost sounds like this bug;
    CSCtn81201
    Incorrect "Hardware Configuration Error" due to hardware setup errors
    Symptom:
    Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
    Conditions:
    in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
    Workaround:
    change the in-band usb interface settings to enabled.
    Related Bug
    Status
    Fixed
    Severity
    4 - minor
    Last Modified
    Aug 17,2011
    Product
    Cisco Unified Communications Manager (CallManager)
    Platform
    Dependent
    Technology
    nav
    1st Found-in
    8.6(0.99081.3)
    Fixed-in
    8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
    Cheers!
    Rob

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • Problem with photoshop on my mac

    Hey...
    I have some problem with photoshop on my mac...
    When i open the photoshop my screen change his color...
    The screen changes such delicate blue color.
    and when i close the app the color has back to the original color.
    photoshop cs 6 (master collection)
    macbook pro 15"
    OS X Mountain Lion
    2.3 i7
    4 giga ram
    Have a nice day

    Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
    You can turn that off in photoshop cs6 under Window>Application Frame.
    If that's not it, could you post a screenshot?

  • I have problem with starting up my Mac Pro ?

    Dear ,
    I'have a problem with starting up my Mac Pro , please advice me how to start it

    This may help.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

Maybe you are looking for

  • Solution landscape doesn't appear in Solution Manager Diagnostics

    Dear all, I have configured 6 Solution Landscapes in transaction solution_manager. One for ECC5, one for PI 7.0, one for BI 7.0, one for Solution Manager 7.0, one for SRM 4.0 and finally one for NW 04 Portal. When I go to my Solution Manager Diagnost

  • Downloading from PC to Ipad

    I want to download directions from a disc to my PC and then to my Ipad.  Can this be done?

  • How to pass variable in a function

    I would like to ask how to pass the value "char" into the "onSoundComplete" function? many thanks! many thanks! _root.playVO = function(pageNum, char){ var myVO:Sound = new Sound(); myVO.loadSound("vo/vo" + pageNum + ".mp3", true); _root.myVO.onSound

  • Retrieving AttributeSet from PlainDocument

    In looking at the composition of javax.swing.text.Element and the Document and AttributeSet interfaces - it appears as if I should be able to retrieve an AttributeSet that was assigned to a particular location when a string is inserted into a Documen

  • Hierarchy maintain and load

    hi , i am new to SAP -Bi , Can any one explain me how to maintain Hierarchy and load data into it .i have sandbox system for practice. Thanks Ganesh.