Problem with Internal Note

Hi All,
Here is the problem,
Whenever an approver adds a note to the Shopping Cart, the notes and the time stamp are not properly aligned or in other words, the notes added and the time-stamp which is generated along with it are not in continous line , does anybody have answer to this ??
Thanks

Hi
<b>Please go through the follwoing SAP OSS Notes -></b>
Note 491781 - ITS updates in Release 6.20 (Composite OSS Note)
Note 890601 - SAP Integrated ITS updates for NetWeaver 2004s (7.00)
Note 721993 - ITS updates in Release 6.40 (SAP Integrated ITS)
Note 987640 - Text Editor missing under documents tab for all BO
Note 768063 - ITS TextEdit: Cursor cannot be set in read-only mode
Note 854381 - SITSPMON: The Mutex statistics only correct after a refresh
Note 791674 - ITS: siac_upload, siac_publish, lang.-dep. templates, screen
Note 788798 - ITS TextEdit: Incorrect forward navigation in ABAP Editor
Note 839814 - ITS: Internet Explorer help opens with F key [F1]
Hope this will help.
Regards
- Atul

Similar Messages

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with internal speakers of MacBook Pro

Hi,
I wanted to know if anyone have experienced a problem with internal speakers of Mac Book Pro. In my MackBook the Internal speaker volume goes down automatically. I checked the System Preferences>Sound>Output , from there I check that it is in the middle ( Balance) However, the problem is still the exists. Just for testing I played an audio file and I moved the bar toward the right speaker it is the same and when I move toward the left speaker the whole sound goes off . Looks like one speaker stops working completely. Then I checked the Utilities > Audio MIDI Setup > Configure Speakers from there I checked both left and right speakers and the channel frequency is fine. Still same issue. I have no idea what is going on , I really need your suggestions to get this fixed.
Thanks in advance.

Try the following:
http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
Also, consider installing Boom

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

Hi sarahdavis0_o,
Welcome to the Apple Support Communities!
If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe

HT5312 So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

If you mean that you aren't getting the reset link, then from the page that you posted from :
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
You can contact iTunes Support in your country via this page : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

RFIDITVCL : problem with variation notes

Hi Experts,
I have implemented the sapnote 1639418 "RFIDITVCL: 3000 Euro Communication additional changes", but I have a problem with variation notes related to specific invoices in same year...the user guide in the note says that they are clubbed together and the total is compared with the limit...I think that the report doesn't function in this case (my case is higher 25000u20AC) and so my documents aren't in the list....
Do you have the same problem??
Thank you
Best regards
Angela

Dear Angela,
I have the same problem. The program looks at field BSEG-REBZG.
However this field is empty in our case.
We create our debit and credit memo's with reference to the original sales order.
Who knows a solution?
Roelie

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3

Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problems with IE8 "not responding" on windows 7

I have a Toshiba Satellite L-355 that has been upgraded to run Windows 7 Home Premium from Windows Vista. I've been having problems with IE8 "not responding" and have tried running it without add-ons, system restore, and banging my head against the wall. All to no avail. Does anybody have any ideas how to fix this? I've tried running other browsers with the same problems.

Intel(R) HM55 Express Chipset LPC Interface Controller
Thanks, sav! That's perfect. (Good to know it shows up in Device Manager for people, too.)
Okay ... although it's the Intel P55 and PM55 chipsets which get all the press about cranky Touch/iPhone connections on Windows 7 systems (the 0xE0000065, -6999 and "Disk can not be read or written to" error messages are the most common, although symptoms can vary further than that), similar sorts of issues look like they could strike other Intel 5-series chipsets ... including your HM55.
So I'm proceeding precisely as I would with someone with a PM55 chipset.
*1) Dell updates*
Some folks with 5-series chipset trouble have got past it by way of BIOS updates. So I thinks it's worth your heading to your Downloads page at Dell, and checking to see if there's any newer versions of your BIOS lurking there. Unfortunately, with the Studio 15s I'm never precisely sure which is the correct downloads page ... so I'd try going to the following Dell page:
http://support.dell.com/support/downloads/index.aspx
... enter your service tag, and then drill through to your downloads page.
Any improvement with your syncing performance after applying any available BIOS updates at Dell?
*(2) Adjust power management setting on USB controllers*
If no joy after updating (if you were behind on your BIOS version), try applying the measures from the following document:
[iPod not recognized when connected to Windows laptop over USB|iPod not recognized when connected to Windows laptop over USB]
Reboot the PC after making the changes, and then try another sync. Any improvement?
(If either set of measures improves your sync performance, please post back to let us know which one helped for you.)

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail. Apple tech support was worthless.

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.

Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome.

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

Problem with windows not liking any files named prn

I recently found a problem with windows not liking any files
called prn.html, prn.cfm etc etc. If you try and create a file like
prn.html then it will say "File already exists".
I initially thought it was a Cold Fusion error as I was
getting some bizarre error messages when trying to write prn.html
using cffile.
Does anyone know a work around for it?

Hi,
Not only "prn" but also for the terms like "AUX", "NUL" you
can't create any directories or files in Windows because these are
reserved terms with Windows which is meant for some device
drivers...

Problem with internal HD upgrade- Flashing "?" over HD icon on startup

Last weekend, I installed a Western Digital 250GB internal IDE 2.5 inch drive (WD2500BEVE) to replace the internal HD on my 15 inch G4 PB Aluminium (not sure of processor speed, but purchased new in 2004, with OSX 10.4.11). I backed up my existing HD to my friend's MacBook, as a disk image using Carbon Copy Cloner. I was very careful with the installation (using anti-static wristband etc etc). The installation appeared to go well. The newly installed internal HD could be mounted as an external HD of my friend's MacBook (using firewire Target Disk mode). Carbon Copy Cloner copied everything back to the new internal HD without any apparent problems.
BUT THEN... when I disconnected the firewire connection and tried to start my computer on its own, the dreaded 'flashing question mark over hard drive' icon appeared.
Can anyone suggest what the problem might be? Three things I've already excluded are:
(1) The jumper settings on the HD are correct.
(2) I formatted the new HD as Mac OS extended (journaled)
(3) The problem is not with the master boot sector (i.e. the problem is not merely that the computer can see the HD but does not know how to load the system from it). My computer cannot see the HD at all -- when I insert my operating system DVDs as if to reinstall the system, my internal HD does not even appear.
I am not panicking as I can still view the contents of my internal HD by booting it as an external HD of my friend's computer. But there seems to be a problem with my CPU communicating with my internal HD. The core of the mystery is: why can I boot my new internal HD off my friend's computer using FireWire, yet when I start my computer on its own using the operating system DVDs, the computer doesn't seem to recognise the HD whatsoever?
Does anyone have any suggestions?

Can we establish what model Powerbook you have? Take the battery out and look for the label.
I have a feeling that your PB cannot recognize the 250GB drive, although I was under the impression that the older PBs that could only recognize 128GB would simply ignore the extra disk space. Perhaps the ATA specs aren't all backward compatible, although the Firewire interface can handle it.
Other World Computing can obtusely point out which drives your model can handle, although I don't know it its 100% accurate.
http://eshop.macsales.com/MyOWC/

Bizarre problem with internal drive

I have a 15" G4 PPC 1ghz Powerbook with 1gb SDRAM. A couple of years ago the hard drive failed. I bought another and replaced it, only to find that there seemed to be a problem with the new one as well. To cut a long story short: I needed a working machine, so mothballed it and bought a new one. for various reasons I'd now like to get it going. So...
Yesterday, I started it up. As expected it couldn't find it's own drive and just gave me the grey screen with the file/question mark icon. I shut it down and plugged in an external firewire enclosure containing a working 60gb drive with a full bootable OS installed (for brevity I'll call this Drive 1 from now on).
I started it again and it booted from Drive 1. It worked fine. I then shut it down, opened it up and replaced the internal Drive with Drive 1. I put everything back in place (being careful to make sure the drive was properly connected) and hit the on button. Again the file/question mark icon. I tried booting whilst holding down the "c" key. Didn't help.
So, I then plugged in another Firewire bootable drive (Drive 2). It booted from Drive 2 no problem. So, at this point I'm thinking, "Well, I've probably damaged the hard drive connecting cable - better get a new one". Never-the-less I thought I'd run a few test. And this is where it gets slightly bizarre:
I stuck in the Apple Hardware test disk, shut the machine down, removed Drive 2, started it again then ran a full hardware check, it told me: Airport - passed, logic Board - passed, mass storage - passed, memory - passed, modem - passed, video ram - passed. As there was no other Drive present this means it was detecting and okay-ing Drive 1, right?
I shut it down replaced the firewire Drive 2. Re-booted. Then opened "About this Mac". Under ATA it clearly shows a FUBITSU 55.89GB Drive. Which is Drive 1. (Drive 2 comes up under "Firewire" as SMARTDISK CORP).
The details given for Drive 1 are as follows:
Capacity: 55.89 GB
Model: FUBITSU EHT2060AT
Revision: 0124
Serial Number: FN4****B55
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ATA
Unit Number: 0
Socket Type: Internal
Low Power Polling: No
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Verified
I also looked in Disk Utility. In the column on the left, at the top it shows Drive 2 with the Firewire icon. As per usual, it shows twice, once a the top with the manufacturer's name and again underneath with the name I gave it when I formatted it. If you click on either, it offers you all the usual options for Verifying and Repairing Permissions.
Underneath that is a listing for the Drive 1 with the Internal Drive icon. This it shows only once - the listing with the manufacturer's name. If I highlight it the verify/repair options are all greyed out and unavailable.
The last thing I can think of that may be of any help is that if I open carbon copy cloner it only only shows Drive 2 and doesn't pick up the internal.
Could it be a partially damaged cable? Meaning the machine sees the drive but can't use it? Any ideas would be most welcome.
ET
<Edited by Moderator>

Hi does sound like the cable but did you try running the hardware test CD with the internal drive installed and did it report it? These you could try while waiting on a new ribbon cable.
Also in the system profile was the internal drive selected as boot drive, you can set this using the OS X installer disk by booting from it.
Long shot, is your PRAM battery good? If not that might be the problem, does your date and time stay correct or does it need to be reset on bootup? If it's dead the PowerBook might not be seeing the internal drive or perhaps as I've seen on some PowerBooks it takes a few seconds to a minute for the PowerBook to go down the list and find the bootable drive so guess the final question was were you waiting long enough?
Kevin
<Edited by Moderator>

Problem with Internal Note

Similar Messages

Maybe you are looking for