Problem with Left Click (mighty mouse) and flash content

Hi, first sorry for my bad english...
Well I have an issue with the left click (i have mighty mouse) and flash content in Firefox:
if i'm using Firefox and then change to any other app, when i get back to firefox i have no left click anymore...
So i have to open the mouse setting panel and everything works fine again...
I don't want to open the mouse panel over and over again to fix that, so what i can do?
THANKS in advance =)
I uploaded a video to show the issue:
http://www.youtube.com/watch?v=ROWSod5fUjk
Mighty mouse Settings:
Left Click + Right Click
Firefox ver: 3.5.5
Snow Leopard: 10.6.2
iMac 24" (iMac9,1)
Message was edited by: MaLk Gopher

Hi, Guys!!
And you have some right cosmic_hippo , Why?
Well think that the real problem it's something between Firefox and Flash content...
because if i use Safari and i try make what i describe in the first post, i don't have any problem with the mouse settings.
Only Happens when i use Firefox...
Cheers.
Well the issue is still there...

Similar Messages

Problems with older BT mighty mouse - no pref pane?

I recently was given an older BT mighty mouse (meaning the model without the trackball). It works great, except when I go into the mouse preferences, it won't let me set the buttons. With my wired mighty mouse, I get a menu that shows the mouse and lets you pick what each button will do.... my BT mighty mouse doesn't show this at all. I currently have no right click option, and can't get anywhere to set it.
Is this normal, or is there something I'm missing that needs to be installed/changed?

I have tried using the keyboard/mouse software that came with my wireless keyboard -no luck.
Have deleted the com.apple.bluetooth.plist file, rebooted, cleared the PRAM, and reinstalled with no luck.
Have deleted the device and set it up again - no luck
I have an option to set my tracking speed and my double-click speed and that's it. No options for the buttons, nothing...

Mega Connection Problems with B/T Mighty Mouse :(

My bluetooth mighty mouse is having major problems with connectivity. Some times the thing works flawlessly, but other times (like right now) it won't stay connected for more than 30 seconds...I AM ABOUT TO THROW THIS THING AGAINST THE WALL!!
HELP!!

I also had the same problem but it apparently stopped after I updated to OS X 10.4.10 and updated AirPort Extreme.
The only thing is that my connection to the internet via AirPort keeps failing while using the mouse.

Bluetooth problem with OSX Yosemite: Magic Mouse and Keyboard

Hello everyone,
I've a problem on my MacBook Pro with Retina Display 13" (late 2013).
I've always used it plugged with an external monitor (I love double screen), magic mouse and bluetooth keyboard. On Mavericks everything was perfect with this setup.
Yesterday I installed OSX Yosemite and I've found a boring problem: my Magic Mouse and my Bluetooth Keyboard have a 0.5 second of latency, lag. This happen when the Macbook is not plugged with battery charger. When he is on charge, the problem don't exist.
I noticed this bug also on the public beta of this summer and submit the feedback.
I hoped that they fixed this before release but the bug is still here.
How can i solve this boring problem?

I also reported this issue again and again during each beta release.
This makes the MacBook basically unusable in battery power for doing any kind of design and coding work.
I don't have any bluetooth addons or third party utilities. I also tried clearing PRAMs, and reinstalling Yosemite, to no avail.
Here are some threads about the issue, which, I'm noticing, is common.
http://forums.macrumors.com/showthread.php?t=1802931
http://forums.macrumors.com/showthread.php?t=1802838
Note that while the issue is kind of tolerable using the mouse, it's tragic with the keyboard.
Does this prevent you from using OS X Yosemite?
The issue makes it very difficult for me to use OS X Yosemite
For the report, here are the issues I submitted about this using the feedback assistant:
#116709, #128648, #129129
#132546, #391247

Yosemite problems with double click dock commands and keyboard shorcuts

I have a mid 2012 macbook pro 17", i recently installed Yosemite although it fixed my internet problem (connection dropping randomly) now i am having issues with opening apps and files. Double clicking on a file launches the corresponding app but does't open the file i just get and message stating the app is not open anymore if click the file again. Finder keyboard shorcuts such as command+Q don't work. Can't access some menu items such as "about this mac". Dragging a file into the dock icon launches the app but doesn't open the file either.
I have no idea what's causing this. anybody got a clue or having similar problems
Thank you

Same problem here. (Yosemite 10.0.1)
the mouse is a 'team scorpion g-reaver' http://teamscorpion.net/ts2014/g-reaver_1.html
It's work perfectly on the pc of my brother (he uses windows).
It's a clean install...
And has a funny fact... The Left Button was with this problem... So what I did? I changed the primary mouse button to the Right... Worked ok for almost 1~2 days... After that, the two buttons showed the double-click problem....
But, I repeat, the mouse works perfectly in the windows of my brother '-'

Problem with Safari 5.0 update and Flash

It seems there are several Flash related issues with updating to Safari 5.0, and I am also struggling.
Since updating Safari, the Flash plugin is not being found by any programs (I've tried Safari, Firefox and Zattoo).
I have tried (in various orders) repairing disk permissions, restarting, reinstalling safari 5.0, removing and reinstalling the Flash plugin (10.1), resetting Safari, installing an older version of Flash (9.0). No luck as yet.
Please help!

Home is a sorta shorthand for the base or root folder within a User Account - in Finder, you click on the lil house-type icon in left & that's your account Home.
It can also be found via HD/Users/Account User name/
the symbol ~ is used to represent it - so ~/Library/ is your account Library, whilst /Library/ is the HD/Library
Excuse the lesson
Now - if you're saying that the contents of
~/Library/Internet Plug-ins/
and
/Library/Internet Plug-ins/
are the same ( use Finder - Go to Folder and paste the above if you're not certain you checked the right place )
then you should trash all of those within your account at ~/Library/Internet Plug-ins/

Problems with New Kernel regarding mouse and random shutdowns etc

After upgrading to kernel 3.2.1-2, my computer has shutdown a couple times. They "normal" shutdowns as in I will press the shutdown button in my de and computer actually shuts down. Also a couple times when turning my computer off i will have to reboot because my laptop touchpad is not working. going into a tty i do rmmod psmouse and it will say the module is not loaded, loading the module makes no difference. The last few updates I have also had regressions with my wireless. By default arch blocks my wireless and in rc.local I have rfkill unblock all, but this lately does not always work. I have been manually loading the ath9k driver. My laptop is a gateway nv79c, intel i5, onboard graphics, 4 gb of ram. My wireless card is an atheros ar928x. To be clear, the mouse problem and shutting down has started since updating to 3.2.1-2. Yes I know the kernel was just updated today but I have been using my laptop a lot today.
Last edited by quasifilmie (2012-01-24 03:21:25)

I seem to have the same problem. The sound would play in some programs, would not in others, and in all of them when I stop playing, it would repeat the last half second endlessly. Could anybody shed some light on this problem?
in dmesg:
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
and in errors.log:
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted.
May 13 09:14:22 aconarch AC'97 1 access is not valid [0xffffffff], removing mixer.
May 13 09:14:22 aconarch ali mixer 1 creating error.
EDIT: 'lsmod | grep snd'
snd_seq_oss 29056 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38816 0
snd_mixer_oss 14336 1 snd_pcm_oss
snd_ali5451 19212 1
snd_ac97_codec 95396 1 snd_ali5451
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 3 snd_pcm_oss,snd_ali5451,snd_ac97_codec
snd_timer 19076 2 snd_seq,snd_pcm
snd 44388 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7816 1 snd_pcm
Last edited by bender02 (2007-05-13 15:41:04)

Wired Mighty Mouse and right click on my intel imac

Hi,
This is a stumper!
1) Wired mighty mouse stated to lose right click functions. Control click
works fine but right click with menus is gone.
2) Tried steer mouse. No change
3) Deleted hidmouse user prefs. No change.
4) System Archive and install. no change
5) Clean install and Account reinstall (by hand). no change
6) Nuke and Pave. no change
7.) Pram reset. no change
8) Mouse works on other Macbook- not a mouse problem.
9) Second Mighty mouse exhibits the same problem.
10) logging into second account. no change
11) Other 2 button mice work!
12) I like my mighty mouse, but I need right click!!
13) Tried Apple Dev hid driver debug . no change
14) Tried a bunch of other things but this has me stumped....
(and I'm Apple Certified) any other suggeestions or software
I can try? Context plugins are ok...but I'm not sure if there are other prefes to deleted? Also, a totally fresh install should have fixed this...what's going on here? I need to know.

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Mighty mouse and right click???

I have a mighty mouse and the right is set to a primary button however it doesn't function like a right click. i still have to press control to get the right click functionality?? HELP!!

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

Mighty Mouse and Wireless Keyboard with Final Cut Studio

Hello,
I'm looking into picking up the Mighty Mouse and the Wireless Keyboard, but I've noticed that the keyboard has some set backs.
It's missing the right side. This bothers me because I use the arrows very frequently to navigate through my timeline - they're very helpful for several reasons. Will I be able to assign keys on my wireless keyboard to do the same actions as these arrows.
Please let me know if any out there has any input at all. Also, let me know if there is anything else that I may be missing before I commit a consumer error.
Thank you,
Trey Vollmer

treyvon wrote:
I'm looking into picking up the Mighty Mouse and the Wireless Keyboard, but I've noticed that the keyboard has some set backs.
It's missing the right side. This bothers me because I use the arrows very frequently to navigate through my timeline - they're very helpful for several reasons. Will I be able to assign keys on my wireless keyboard to do the same actions as these arrows.
If you're talking about the Aluminum (super-thin) wireless keyboard, it certainly has arrow keys.
What's missing is the numeric keypad and the home, end, page up/down buttons.
The numeric keypad is a kind of a big deal for those of us who make use of the number pad key shortcuts to disable/enable AutoSelect (Command-Numeric Zero toggles all Video Tracks, Option-Numeric Zero toggles all Audio Tracks). OK, so that describes maybe 15 people out of the millions of users. But, thankfully, you can use Button Bars to replace those functions.
The numeric keypad is also important if you use the Multicam keyboard layout, but that can be replaced by Button Bars.
Don't like the mouse and keyboard that you have now?
Message was edited by hanumang

Issues with Bluetooth/Wireless Mighty Mouse since Snow Leopard Install

Hi,
I am having issues with my bluetooth wireless mighty mouse. It was fine after initially having installed Snow Leopard. However, in the past week it has become progressively more and more unresponsive. It functions perfectly normal for the first while after startup, then after a short period of time it becomes slow to respond to the mouse movements that move the cursor. Eventually it gets to the point that moving the mouse results in no cursor movement whatsoever. It also becomes unresponsive to squeezing the side buttons. There are no issues with clicking or scrolling with the track ball.
I have searched the discussion forums to find issues that pertain to "bluetooth" and "wireless mighty mouse" and have tried the following suggested remedies... Repairing my Mouse with my Mac mini. Renaming my mouse. Deleting the com.apple.Bluetooth.plist file from Macintosh HD\Library\Preferences and restarting my Mac. Reset PRAM and NVRAM. Also tried to install Bluetooth Firmware update 2.0.1 but I get an indication that the update is not needed on my Mac mini. I have also checked for software updates but there are none...
I am going to attempt resetting the SMC but am doubtful that this will help...
Can anyone help... Please... ?
Thanks,
Des

I had read in another forum where someone had an understanding that the bluetooth problem had something to do with Airport/Time Capsule. I had also read about how someone was having an issue with being unable to turn off airport. (I had this same problem.)
Upon deleting a few airport related plist files (see below url) I was able to turn off/on airport AND my Mouse issue has no longer appeared... everything is working a-ok now.
http://discussions.apple.com/thread.jspa?messageID=10125976&#10125976

Mighty Mouse and wireless keyboard stop working

Just got my iMac yesterday and everything worked out of the box. But once yesterday and once so far today, the wireless mighty mouse and keyboard stopped working.
Today I noticed after the mouse stopped moving the cursor, the little green light on the bottom of the mouse was blinking. I turned off the mouse and turned it back on, but the green light still blinked and the mouse still didn't work.
The only thing that did something was the power button on the iMac. I had to turn off the iMac and turn it back on. Then the keyboard and mouse worked again.
What's going on? Do I need to get the iMac repaired?

Hello and Welcome to Apple Discussions ...
Try deleting this file. com.apple.bluetooth.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
If that doesn't help, make sure the batteries are charged. Go to System Preferences/Keyboard&Mouse. Click the Bluetooth tab. Your battery levels are displayed there. When it gets down to one green bar on the left, install new batteries.
If none of the above helps, turn the mouse and keyboard off. Delete the mouse and keyboard from the System Preferences/Bluetooth devices window. Select the mouse in the window on the left, then click the minus - button. Now open the slider on the mouse so the green light blinks. Click + which will launch the Bluetooth Setup Assistant. Just follow the instructions. Same for the keyboard. If you still have issues with the wireless hardware, I'd take it back. You have 14 days in case you need to replace the iMac.
Carolyn

Mighty Mouse and Maya? How does it wok?

Does anyone have any experience with the Mighty Mouse and Maya? I'd like to know how it works with the right and middle clicks. Thanks!

Does your computer have built-in Bluetooth, or an external Bluetooth adapter? If not, there's your problem.

Problem with Left Click (mighty mouse) and flash content

Similar Messages

Maybe you are looking for