Problem with Motion

I am using motion since long time. But yesterday unexpectedly my Motion failed. Dont know what happened. But now i couldn't open any existing motion file. It shows error. "Could not open file." I tried to install motion again. But it could not solved my problem. What can i do now?

Welcome to the forums. FYI, a more descriptive title can help getting a response quicker... Nearly all posts are about a problem with Motion...
See if this helps...
http://support.apple.com/kb/TS3061
Patrick

Similar Messages

  • Problem with Motion Menus

    I'm using iDVD 6.0.4 and am having a problem with the menu system.
    Everything is fine, and the project is about ready to burn, however whenever I go to add a still picture for the background of the two Chapters selection screens, the Motion Menus time jumps from 4:45/15:00 to over 15:00 by just adding one picture.
    What is causing this, and how do I get it to stop!?
    Any help would be appreciated.
    Thanks...
    Mike

    I had the same problem. Took ages to figure out the problem and the error message does not show up in the manual, though the 15 time limit for 4:3 is mentioned. Does this work better in iDVD08?

  • Problem with motion tweening in Flash CS4

    Hi !
    I tried to refresh my little flash knowledge -- but I stumbled upon a problem with the new Flash CS4!
    When I try to make different blur or alpha effect on one keyframe I got after making the motion tween -- Flash adjust the other keyframe as well (got the same reaction on both keyframes as if it was the same instance of movie clip -- and not as in old flash; the keyframes created separated or independent instances)
    The only thing working for me is when I move the movie clip out of the stage on the first keyframe -- and it correctly move its position.
    What's wrong?
    Kind Regards
    Maria Olsen

    Hello Maria,
    You sort of answered your own question:)
    "got the same reaction on both keyframes as if it was the same instance of movie clip"
    That is exactly right and is the proper way of looking at new motion tweens. It is one instance of the movieclip for the duration of the tween. It takes awhile to get used to this.
    New motion tweens allow you to set up a a very simple tween initially without keyframing ending values / position. Once you start making changes after the tween is set, you are going to have to get familiar with adding "property keyframes". Property keyframes are displayed with those little diamond icons in the timeline. Poperty keyframes allow you to "lock in" certain specific properties at key points in your animation without affecting other properties. With the old classic keyframes, a keyframe placed mid-tween would create a whole new instance of a symbol with all properties (rotation, scale, alpha etc) set in stone for that point in time. The benefit was that you could easily have all properties tween TO and FROM that keyframe if that's what you wanted. Now you can make adjustments to a symbol mid-tween and only specifically adjust a single property. So you can adjust the alpha of an object mid-tween without interrupting say a rotation that you wanted to happen all the way through.
    If you simply want an object to move left to right and then you decide it should fade in
    CLASSIC TWEEN
    -place symbol on frame 1
    -keyframe frame 10
    -in frame 10 move the symbol to the right
    -add classice tween
    Ok, that works, now add alpha fade in
    -go back to frame 1 and set alpha to 0
    -classice tween automatically adjusts alpha from 0 in frame 1 to 100 in frame 10.
    -done
    MOTION TWEEN
    -place symbol on stage
    -create motion tween
    -playhead jumps to last frame
    -move symbol to the right (no need to f6 / keyframe)
         Flash automatically adds something called a "position" keyframe (notice the little black diamond)
    Ok, that works, now add alpha fade in
    -go to frame 1 and set alpha to 0
    -test movie
    -oops - wrong. As you noted the alpha will stay at 0 throughout the whole tween.
    -you need to additionally go to the last frame and set the alpha back to 100
         -this will automtically create a "color" property keyframe on the last frame
    When just doing this now I noticed something odd as well
    As soon as I do the position change and move the symbol to the right, if I try to add the "color keyframe" on the last frame of the tween, I am not allowed to do so. "color" and "filter" are greyed out. I would prefer to lock the alpha at 100 in the last frame while the playhead is in position before setting it down to 0 in frame 1. Oh well.
    Seems you are forced to
    -go back to the beginning of the tween
    -adjust the alpha
    -then go to the end and manually bring the alpha back up.
    hmm maybe i'm missing something too:)
    the best way to do this would be to have the foresight ahead of time to do the alpha
    -place the symbol
    -alpha 0
    -add motion tween
    -in last frame move the symbol  set alpha to 100 (alpha and position keyframes are automatically set)
    So if you do it right the first time, its easy. If not, well.
    Keep in mind an object will maintain the properties it has set in frame 1 unless a subsequent property keyframe enforces some adjustment.
    If you have have an object that is moving from point a to b to c to d:
    If you alter the alpha at point b, the alpha will tween from point a to b, but will maintain the new alpha to c, to d.
    If you scale the clip by 200% at point, its scale will tween from point a all the way to point d, NOT just from c to d
    To scale from point c to d only, set a "scale" property keyframe at point c (this will lock the objects scale at 100) THEN scale to 200% at point d
    It takes a good deal of practice. I found the hard way that you just can't "wing" it. It isn't very intuitive coming from a classic tween approach.
    These articles really helped me:
    http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html
    http://www.adobe.com/devnet/flash/learning_guide/animation/
    Take note of the tips on "cntr-clicking" frames and "shift-dragging". You have to really get used to a few keyboard modifiers when editing the timeline.
    Stick around the forums. A lot of good info comes through daily.
    Carl

  • Weird problems with motion 3 displaying pink lines and other garbage

    I am using Motion3 to create HD graphics. With each of my projects I start with motion everything is fine until I build about 4 different layers or add any type of motion or filters.
    It seems as my projects get more complex my viewer window or canvas starts displaying weird things. Pink lines, white and black garbage, nasty thin lines, various other junk. Sometimes the image is completely gone.
    I have had some luck retrieving it by turning off motion blur or turning of field rendering and turning it back on. This fix only works sometimes.
    Other times my video displays fine until I render out and then the garbage happens.
    Anyone come across this?
    I am currently using a an ati radeon 9600 video card and it's running two monitors on dvi and one vga. I have ordered an nvidia 7800 gs in hopes it will fix this problem and ease the pain of render times.
    I have been using motion 2 for a while and never had this issue. I was hoping to milk this system for a while before having to upgrade.
    Any thoughts or suggestions?

    I think you are pushing that card to it's limit with HD and splitting the VRAM across two monitors. I would bet a new card will clear things up.

  • Problems with Motion 2 / FCP-Interaction

    Hi!
    Somehow Motion 2 and FCP 5.1 don't play too well together on my system. Here's the problem:
    I am producing tutorial movies for a certain application. My workflow is as follows:
    1. Record screen movies with SnapZ Pro. I use the Animation codec, resolution 1152x720.
    2. I import the clips to FCP and render them. The clips rendered by FCP have a data rate of 4.2 MB/sec.
    3. I want to add text overlays to some clips, so I send those clips over to Motion 2. Here is where the first problem occurs: Motion doesn't import properly from FCP. Let's say, the clip I send to Motion runs 50 seconds. Motion will play the clip for about 3-5 seconds and then freeze the video, whereas the audio continues playing. I resolve this problem by deleting the faulty video track that FCP has created in my Motion project and then importing the corresponding video file manually into Motion 2.
    4. I do my Motion stuff and save the file.
    5. Back in FCP, I have to render the clip again. Sometimes I have to reconnect the clip with the Motion file, sometimes not. Don't know why.
    6. After rendering, the second problem occurs. The video clip is blurry. By right-clicking the clip I get to open the object settings I find that the data rate of the clip altered in Motion is only "500/s". Also, there doesn't seem to be codec anymore.
    For illustration I habe posted two pictures. First, the original clip created with SnapZ and imported to FCP:
    http://homepage.mac.com/cmeermann/filechute/Original%20Clip.jpg
    Now, here's how the clip looks like after altering it in Motion and rerendering it. As you can see, it is quite blurry:
    http://homepage.mac.com/cmeermann/filechute/Motion%20Clip.jpg
    My client is waiting for results, so I'd really appreciate some quick answers.
    Thanks in advance,
    Christian Meermann
    iMac Core Duo   Mac OS X (10.4)   1,5GB RAM
    iMac Core Duo   Mac OS X (10.4)   1,5GB RAM

    happy to help...
    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Problems with Motion title

    I am trying to create a title using one of Motion's pre-made template's but every time I try to import the picture it does not fit the drop zone and I can't resize it or anything. I am very new to Final Cut Studio, I worked with Final Cut Pro a while back but I have not done a whole lot with Motion. I am trying to create some good looking titles for a fitness company that hired me, but I have not had so much luck. If anyone could give me a link to some good tutorials or has some good advice, I would greatly appreciate it.
    Thanks!

    Not sure which template you're using, but there is a Fit parameter with drop zones. Select the drop zone and click on the Image tab in the Inspector. Under the Fit parameter, make sure it says, "Fit" and not Center or Stretch.
    Andy

  • Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

    I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
    Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
    I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
    Thanks
    Paul

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
    tag. This not only gives points to the posters, but points anyone
    searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...

  • Problem with motion tracking

    I have Premiere Elements 12 64 bit on a windows 8 machine. I am trying to use the motion tracking feature. I am able to select an object to track and the resulting yellow rectangle follows the object as it moves through the scene. The problem I have occurs when I try to attach a graphic to the item being tracked; the graphic will not anchor itself to the yellow rectangle when dragged onto it, the rectangle does not turn blue. It appears the graphic is added as a static layer and does not follow the object. I have tried it using various video formats with the same result.

    mac2474
    Thanks for the demo. Very helpful.
    I am still not sure if it is the lack of contrast that is not giving you the best results. I tried to use a model with a light gray object to be tracked against a light blue background. Or, if it is those speech bubbles in contrast to other graphic types that are creating problems.
    But, it is more than that. You did not see that yellow/orange box turn blue when you approached it with the speech bubble.
    I found essentially one on one tracking when I used other than speech bubbles. But, whether speech bubbles or not, my yellow/orange box turned blue with the approach of the speech bubble or other graphic.
    Here is what I would like you to try
    a. Repeat what you did, but do not use the speech bubble. Use one of the other graphics under Graphics, maybe the carrot.
    b. Repeat what you did , but use as source an object with more contrast against its background.
    The main thing we have to work on is getting the yellow/orange to blue change as an indicator of what is supposed to be happening. Also, just back tracking to correct is not enough. If a try does not work, start with newly imported files to avoid any unexpected variables until we work out the situation.
    Thanks.
    ATR

  • Slow Motion Problem with Motion 3

    Hi, I am new to using Motion 3 and am having major frustration trying to get slow motion to work. I have applied a speed reduction to a short clip about 5 seconds in lengh. I've tried reducing the speed to 50% on one and about 10% on the other, booth using Optical Flow. But for some reason the resulting clip is very jerky and I have no idea why it is doing this. I have tried it with multiple other clips but it is till doing the same thing. Does anyone have any ideas? Please I am desperate to resolve this problem!
    Here is a clip of the resulting problem if it helps...
    http://reels.creativecow.net/film/slow-mo-test

    Haven't heard a thing, but snce backward works and forward doesn't I think it is definitely a bug, not intentional. Since Verizon really doesn't watch these threads, these forums are users helping other users, I suggest you go over to dslreports.com, register if you are not already registered (it is free), and then post in the Verizon Direct forum there. Actual Verizon techs are there to help, and you can report the problem and no one other than Verizon reps can see any of your personal or account info.
    Justin
    FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
    VMS Enhanced Service: 1 server, 2 clients
    Keller, TX 76248 (VHO 1)

  • Weird audio problems with Motion when exporting quicktime videos

    I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
    Here's what i'm using:
    Mac Pro dual 3.0 Xeon
    10 gigs of RAM
    Motion 2.1.2

    hi,
    motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
    Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
    hope this helps
    adam

  • Strange problems with Motion 3

    I upgraded to Motion 3 a few days ago and M3 is giving me some weird problems. I have tested on 3 different Mac systems.
    - Imac with Radeon X1600 running latest Tiger,
    - MacPro with Quadro FX4500 running latest Leopard,
    - MacBookPro with Radeon X1600 running latest Tiger.
    1. Simple Border - when I apply the filter 'simple Border' to a few layers of animated stills, the borders jump out of place randomly on Imac and MacPro, but work fine on MacBookPro.
    2. Gaussian Blur - when applying a small amount of gaussian blur to video on my MacBookPro, the video immediately turn into an orange overlay. Imac and MacPro work fine.
    3. I created an animation with a few stills flying in and out of the frame. All stills have exactly the same animation, one after another. When I open the motn workfile on my Imac, the animation work fine, but when I open the workfile on the MacPro, one of the layer start to scale down for a few frames then back to normal. I have checked the Keyframe Editor but there is no corresponding keyframe to animation the scale down.
    4. When I drag clips on the timeline, the keyframes of the clips are suppose to move together. Most of the layers behave correctly but some random layers' keyframes simple refuse to move. I have to select the keyframes in the Keyframe Editor in order to move them. This happens on both the MacPro and the MacBook Pro. I have not test it on the Imac.
    The problems are so random and they are driving me and my client nuts. Have anyone of you out there experience the same/similar problems?

    Welcome to the discussions.
    All the latest updates?
    Patrick

  • CS5 - problem with motion tween..HELP!!

    Experts out there, please help.
    I have migrated from Flash CS3 to Flash CS5. Unlike in CS3, in CS5 when i use motion tween i am unable to use multiple 'ease in' and 'ease outs' in a single tween span. The tween span has to be divided by the 'split motion' command at 'properties keyframes' into smaller tween spans to further apply ease in/out to each one of them. This is not the case with CS3, you just select one keyframe after another and apply the ease in/out command, no divisions required.
    Lets say i want control the accelaration and deccelaration of a bouncing ball without breaking the tween span. How do I do it in CS5 without wasting all the sweat?
    Please guys i really need this
    I'll be greatful
    Thanks

    The classic tween is the same as the old Motion tween was in CS3 and earlier. You can grab a keyframe and drag it along he timeline to extend or reduce the tween.
    The "new" Motion tween was invented to allow for 3D tweening and to allow you to save the tween action exclusive of the elements that were being tweened, so that you can easily replicate a tween on the timeline.

  • What can i do for the -3degree problem with motion sensor?

    Compare with my Iphone 5 ...There is a big problem and confuse me !
    What can i do to solve this problem?

    Apple, I'm sure, is working on it. If it's easy to fix with software, it will be out shortly with software update 7.0.3. Just sit tight.
    If it's a hardware problem, it's unlikely Apple will be able to fix it, and they're equally unlikely to take back millions of phones. My guess is we'll get a free case out of it -- just like with "Antenna Gate".
    My data:
    My iPhone 4 running iOS 7.0.2 agrees with reality (defined by both my bubble and digital contractor levels).
    My 32GB silver iPhone 5s is off by 3 degrees (level function) and about 7 degrees (compass function). I haven't run into any buildings with Tom Tom yet.

  • Problems with motion media

    I have a 1.2ghz G4 ibook with 256 built-in RAM. No matter if I have one or 3 applications running, Windows Media Player is choppy and cuts out. So is Shockwave & Flash. Even Quicktime loads choppily. My internet connection is solid, and the problem persists no matter where I am. Sounds like memory, but I am still a little new to Macs and don't know what to do. Do I just not have enough?

    You need more ram. OSX likes lots of ram so get as much as you can afford. Minimum recommended is 512mb. You have 1 extra slot and you should be able to expand your ram with an additional 1gb. Check you specs first.

  • Problem with Motion 5 "Media Missing in Motion File"

    Greetings,
    When I try to preview templates in the Project Browser, only the ones under Compositions will play in the preview window. Anything else either the screen stays black or I get the “Media Missing in Motion File” It appears that somehow the clip I’m trying to preview has lost the path to the preview file. All these templates are stored in the Movies/Motion Templates/Final Cut Effects or Final Cut Generator folders.
    Any suggestions?

    Your own custom and thrid party templates do not normally have the video clip embedded to do the preview.  This is normal.

Maybe you are looking for

  • NWA or User Management doesn't start

    Hello, All !! I have recently installed a NW 7.0 system. Details listed below: System: SAP SRM 5.0 SR3 Stacks: ABAP+JAVA - single install Platform: HP-UX (64-bit) Database: Oracle Issue / Problem that's on hand I am not able to bring up User Manageme

  • Where are my pictures in Photos after update?

    Hi, after update yosemite my iPhot application is away and Photos is there - but no picture in Photos and only the Photo Library can be open over the Finder (and then if open again) how can I import my picture into Photos?

  • Exported Images turn RED

    My Equipment: Nikon D300s                        Color space:  Adobe 1998             Picture Control Setting:  Neutral             NEF files Mac Computer             PPC and Intel based processors (problem does not change with computer) Monitor NEC

  • Opmnctl status command missing?

    Hello, I'm installing a 3-tier OCS9.0.4 Collaboration Suite on Windows 2003 Server and I just finished installing the infrastructure tier. The installation was successful. I'm following the Application Server 10g Administrator Guide to verify the ins

  • Apple Works doc printing on HP Printer

    I am working with a Mac OS X 10.5.7 and I am having trouble printing a document created in Apple Works 6 on an HP printer. The doc works fine but the bottom margin is far too high and a line at the bottom gets cut off. I have changed the "document" s