Problem with multi aux in jack

Recently was producing as normal, took my bose headphones out of the back and went to turn the volume down, nothing happened.
It's like it doesn't detect the settings being there on the keyboard.. Only way to turn it down is by going to settings and then turning it down in sound..
Has this happened to just me or a few others too? Also, know any solutions?

Similar Messages

Problem with my ipod touch jack

I have a problem with my ipod touch jack. When I listen to music (using non aple headphones and the headphones it came with)it doesn't sound as good as my mp4 player so I purchased an adapter and it still doesn't work what can I do?

The phono input is for a phonograph. The iPod does headphne output is not that same as a phongraph output. Does th stero have an AUX input? That should be compatible.

Problem with multi-mapping

Hello everybody,
we got a problem with multi-mapping.
Source and target message-type are the same:
<xsd:element name="MY_MESSAGE_TYPE">
_<xsd:element name="BUSTRANS">
__<xsd:element name="CHILD_1" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
__<xsd:element name="CHILD_2" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
The requirements are:
<xsd:element name="MY_MESSAGE_TYPE"> should be created as often as <xsd:element name="CHILD_2"..> occurs
a) so we mapped
CHILD_2 -> MY_MESSAGE_TYPE
BUSTRANS -> CopyValue -> BUSTRANS
CHILD_1 -> CopyValue -> CHILD_1
SUB_CHILD_1 -> CopyValue -> SUB_CHILD_1
SUB_CHILD_1_NAME -> CopyValue -> SUB_CHILD_1_NAME
CHILD_2 -> splitByValue(eachValue) -> CHILD_2
The problem is:
If we duplicated
a) SUB_CHILD_1
b) subtree CHILD_2 (so 2 messages will be generated)
for testing, SUB_CHILD_1 only occurs 1 time! But we need it in every target message as often as it occurs in the source message.
For your testing, here is the datatype:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://enbw.com/XI/SAPCRMB2B/javamappings_test" targetNamespace="http://mynamespace.com/XI/SAPCRMB2B/javamappings_test">
<xsd:complexType name="MultipleBookingOrderRequest">
<xsd:sequence>
<xsd:element name="BUSTRANS">
   <xsd:complexType>
    <xsd:sequence>
     <xsd:element name="CHILD_1" maxOccurs="unbounded">
      <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
         <xsd:complexType>
          <xsd:sequence>
           <xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
           </xsd:element>
          </xsd:sequence>
         </xsd:complexType>
        </xsd:element>
       </xsd:sequence>
      </xsd:complexType>
     </xsd:element>
     <xsd:element name="CHILD_2" maxOccurs="unbounded">
      <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
         <xsd:complexType>
          <xsd:sequence>
           <xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
           </xsd:element>
          </xsd:sequence>
         </xsd:complexType>
        </xsd:element>
       </xsd:sequence>
      </xsd:complexType>
     </xsd:element>
    </xsd:sequence>
   </xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Regards
Dominic

Mario,
<i>multimapping (split IDOC into several IDocs) is possible with IDocs. We did it!</i>
Did you use IDOC packaging for this?
AFAIK,when you use multimapping that involves different adapters including one J2EE adapter and a IDOC adapter in the inbound side, multi mapping does not work.
Regards,
Bhavesh

Problem with multi row delete

Hi, I'm new in apex and I tried to build master detail report on some view. Everything is cool but "delete checked" doesn't work.
"ORA-20001: Error in multi row delete operation: row= , ORA-06502: PL/SQL: numeric or value error: NULL index table key value,"
the problem is that I don't know what is wrong :), I have a special trigger "instead of delete on MY_VIEW", but in this error problem is not explained.
Anybody knows what can be wrong? It is probably a problem with trigger or multi row doesn't work with views? I couldn't find how MRD knows what kind of statement use to delete rows so I don't know if the statement that program used is correct. In debug it lokks that:
0.32: ...Do not run process "ApplyMRU", process point=AFTER_SUBMIT, condition type=REQUEST_IN_CONDITION, when button pressed=
0.32: ...Process "ApplyMRD": MULTI_ROW_DELETE (AFTER_SUBMIT) #OWNER#:MY_VIEW:ITEM1:ITEM2
0.33: Show ERROR page...
0.33: Performing rollback...
thanks for any help
//sorry for english mistakes
edit: it doesn't matter if I use in trigger delete from ... where item1=:OLD.item1 ; or if I use item1=:P4_item1 (which actually saves correct values)
Edited by: user5931224 on 2009-06-13 08:55

I realised that this is not a problem with trigger, I changed trigger to "NULL;" and problem is the same. Maybe sb used master detail on view not only on tables and know what can be wrong in this situation?

L430 : problem with multi-monitoring (with workstation)

Hello,
I have some trouble with multi-monitoring on a L430 setup. I have a workstation with a 20' Samsung connected on it (VGA). Double display runs very well.
But now that i have decided to put a 3rd monitor, it is a complete mess. I tried to plug the 3rd screen on the DVI port, but now the 2nd screen is black.
i tried with 2 different monitors, with 1 different cable, i tried to put the 3rd screen directly on the VGA port of the laptop, but i had the same problem.
I read somewhere that with the L430, one cannot plug a 3rd screen, but i cannot believe it.
Is it real?

I would like to be sure of that :/ Working in an IT departement, being able to have only 2 screens because of company limits is strange...

Problems with Multi-Polygon and creating index on it

I have a multipolygon that was created from a SDO_AGGR_UNION and I'm trying to create an index on the geometry. It is failing with...
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Error in spatial index: [mdrcrtxfergm]
ORA-13249: Error in spatial index: [mdpridxtxfergm]
ORA-13200: internal error [ROWID:AAAW8+AAxAAAWdqAAA] in spatial indexing.
ORA-13206: internal error [] while creating the spatial index
ORA-13033: Invalid data in the SDO_ELEM_INFO_ARRAY in SDO_GEOMETRY object
ORA-06512: at "MDSYS
I'm beginning to think it's an issue with Oracle 9.2.0.1 which is the version of database we are using. Just want to check to see if others have had problems with this.
Here is the geometry of the object.
mdsys.sdo_geometry(2007, 900001, NULL, mdsys.sdo_elem_info_array(1, 1003, 1, 125, 1003, 1, 489, 1003, 1, 739, 1003, 1, 825, 1003, 1, 941, 1003, 1, 1209, 1003, 1, 1237, 1003, 1, 1369, 1003, 1, 1511, 1003, 1, 1551, 1003, 1, 1727, 1003, 1, 2445, 1003, 1, 2547, 1003, 1, 3829, 1003, 1, 3937, 1003, 1, 4085, 1003, 1, 4095, 1003, 1, 4583, 1003, 1, 6149, 1003, 1, 6379, 1003, 1, 6433, 1003, 1, 6465, 1003, 1, 6485, 1003, 1, 6559, 1003, 1, 6577, 1003, 1, 6607, 1003, 1, 6773, 1003, 1, 6793, 1003, 1, 6807, 1003, 1, 6825, 1003, 1, 6833, 1003, 1, 6855, 1003, 1, 6885), mdsys.sdo_ordinate_array(235180.1, 1269688.5, 235179.9, 1269684.4, 235180.6, 1269680.3, 235182.1, 1269676.7, 235184.2, 1269673.3, 235187, 1269670.4, 235190.3, 1269668.1, 235194, 1269666.5, 235197.8, 1269665.6, 235200.8, 1269665.5, 235205.5, 1269666.8, 235230.8, 1269673.6, 235242.3, 1269676.5, 235261.8, 1269681.2, 235270.1, 1269683.2, 235281, 1269685.6, 235296.1, 1269689, 235335.7, 1269696.8, 235368.9, 1269702.5, 235372.8, 1269703.5, 235376.4, 1269705.4, 235379.5, 1269707.8, 235382.2, 1269710.9, 235384.1, 1269714.5, 235385.3, 1269718.3, 235385.7, 1269722.6, 235385.4, 1269726.3, 235384.2, 1269730.2, 235382.3, 1269733.7, 235379.9, 1269736.7, 235370.9, 1269745.9, 235357.1, 1269760.7, 235342.1, 1269778.7, 235332.3, 1269791.1, 235323.8, 1269802.8, 235320.4, 1269807.5, 235313.4, 1269818, 235309.4, 1269824, 235307.2, 1269827.6, 235304.5, 1269830.5, 235301.3, 1269832.8, 235297.7, 1269834.3, 235293.9, 1269835.2, 235289.8, 1269835.2, 235286.1, 1269834.4, 235282.4, 1269832.9, 235279.1, 1269830.6, 235278.1, 1269829.8, 235276.2, 1269825.5, 235274, 1269820.9))

The elem_info_array for the multi-polygon is obviosuly wrong:
mdsys.sdo_elem_info_array(1, 1003, 1, 125, 1003, 1, 489, 1003, 1, 739, 1003, 1, 825, 1003, 1, 941, 1003, 1, 1209, 1003, 1, 1237, 1003, 1, 1369, 1003, 1, 1511, 1003, 1, 1551, 1003, 1, 1727, 1003, 1, 2445, 1003, 1, 2547, 1003, 1, 3829, 1003, 1, 3937, 1003, 1, 4085, 1003, 1, 4095, 1003, 1, 4583, 1003, 1, 6149, 1003, 1, 6379, 1003, 1, 6433, 1003, 1, 6465, 1003, 1, 6485, 1003, 1, 6559, 1003, 1, 6577, 1003, 1, 6607, 1003, 1, 6773, 1003, 1, 6793, 1003, 1, 6807, 1003, 1, 6825, 1003, 1, 6833, 1003, 1, 6855, 1003, 1, 6885)
The last entry should be something like: 6885,1003,1; instead it is just 6885.
So the problem might be with sdo_aggr_union as it seems to be creating an invalid geometry.
Can you post the data you used in generating this geometry with sdo_aggr_union ?
siva

[SOLVED?] Problem with multi key macros in emacs

I recently made the switch from gentoo to arch, for the most part everything is up and working. The only thing I am having a problem with is GNU emacs, for some reason i can't use some macros that need more than 2 keys to be pressed. For example M-< will not work but for some reason C-_ will. I haven't got the faintest clue as to what the problem is. I am running xfce and using the us keyboard layout. If i run emacs outside of X than all the macros work fine. Any ideas?
Thanks in advance.
Last edited by flarkis (2010-03-01 22:57:24)

seeing as this problem persists in both the terminal and gui versions i don't think that is possible. I also tried running both versions in twm to see if anything was different. The keys still aren't seen correctly but this time they are replaced with random characters that are not part of my keymap. An X11 problem or keyboard configuration problem?
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">us</merge>
<merge key="input.xkb.variant" type="string" />
</match>
</device>
</deviceinfo>
Last edited by flarkis (2010-02-25 03:28:08)

Problems with multi-account assignment in batch-input program

Hi everybody!
I'll create purchase orders with multi-account assignment via batch input.
When processing dynpro SAPMM06E 0113 I get the message:
"Batch-Input data for dynpro SAPMM06E 0113 are not available".
But all data are already filled in the accounting fields.
There is no way to go back to the position overview.
Here you can see the batch input coding of the multi-account assingment:
     PERFORM dynpro USING: 'X' 'SAPMM06E'        '0113',
                            ' ' 'BDC_CURSOR'      'EKKN-TWRKZ',
                            ' ' 'BDC_OKCODE'      '/00',
                            ' ' 'EKPO-WEPOS'      'X',
                            ' ' 'EKPO-WEUNB'      'X',
                            ' ' 'EKPO-VRTKZ'      wa_ekko_ekpo-vrtkz,
                            ' ' 'EKPO-TWRKZ'      wa_ekko_ekpo-twrkz.
      PERFORM dynpro USING: ' ' 'BDC_CURSOR'      'EKKN-ANLN1(14)',
                            ' ' 'BDC_OKCODE'      '/00',
                            ' ' 'EKPO-WEPOS'      'X',
                            ' ' 'EKPO-WEUNB'      'X',
                            ' ' 'RM06E-MKNTM(14)' ekkn_menge2,
                            ' ' 'EKKN-ANLN1(14)'   wa_ekko_ekpo-anln1,
                            ' ' 'EKKN-ABLAD(14)'   wa_ekko_ekpo-ablad,
                            ' ' 'EKKN-WEMPF(14)'   wa_ekko_ekpo-wempf.
                           ' ' 'BDC_SUBSCR'      'SAPLKACB'.
*(this is repeated for every accounting position)
     PERFORM dynpro USING: ' ' 'BDC_CURSOR'      'EKPO-VRTKZ',
                           ' ' 'BDC_OKCODE'      '=AB',
                           ' ' 'EKPO-WEPOS'      'X',
                           ' ' 'EKPO-WEUNB'      'X'.
Regards,
Anke
Message was edited by:
        Anke Chittka

Hi,
      1 .First record properly depen upon ur requirment,
      2. Test ur recorded code
      3. Note all OK-Code ( when u press any button) * this is important
      4. After that split ur recorded coding dep ur requirment (if u know all OK-Code u can split the recorded coding)
      5. call ur splided coding in ur prg.
i am having coding for PO but this is Dep my requirment

Problem with audio/mic combo jack on MS GS70 Stealth Pro

Hello, i have a problem with the mic/audio plug, when i plug my mic/headphones (Razer Electra / iPhone headset / HTC Headset) in to the plug, i get sound from the headphones, but the mic isn't recognized, i've tried uninstalling the drivers and installing them again, nothing works. Please, help me

Quote from: Mirri;113498
Aaand problem still exists. It just turns out that my laptop mic has taken over from the mic port for some reason. Not sure why it won't recognize that anything is plugged in in the mixer despite stating in the little task bar window that an audio device was plugged in whenever I do it.
Try to use the 4 pin to 3 pin headphone adapter and see if the problem still remains.
Quote
Try to use the 4 pin to 3 pin headphone adapter.
http://www.msi.com/faq/nb-1094.html

Problem with Multi File upload example, help needed

I got the code from the following location.....
http://www.adobe.com/devnet/coldfusion/articles/multifile_upload.html
And I've got it to work to some degree except I cant get the file transfer to work when pressing, Upload.   Below is what my debugger outputs. Any thoughts on how to fix this or even what it means?
At the very bottom of this message is the upload.cfm code.......
Thanks in advance for the help
<html>
<head>
<title>Products - Error</title>
</head>
<body>
<h2>Sorry</h2>
<p>An error occurred when you requested this page.
Please email the Webmaster to report this error.
We will work to correct the problem and apologize
for the inconvenience.</p>
<table border=1>
<tr><td><b>Error Information</b> <br>
Date and time: 12/07/09 22:25:51 <br>
Page: <br>
Remote Address: 67.170.79.241 <br>
HTTP Referer: <br>
Details: ColdFusion cannot determine how to process the tag <CFDOCUMENT>. The tag name may be misspelled.<p>If you are using tags whose names begin with CF but are not ColdFusion tags you should contact Allaire Support. <p>The error occurred while processing an element with a general identifier of (CFDOCUMENT), occupying document position (41:4) to (41:70).<p>The specific sequence of files included or processed is:<code><br><strong>D:\hshome\edejham7\edeweb.com\MultiFileUpload\upload.cfm      </strong></code><br>
<br>
</td></tr></table>
</body>
</html>

<cftry>

    <cffile action="upload"
            filefield="filedata"
            destination="#ExpandPath('\')#MultiFileUpload\uploadedfiles\"
            nameconflict="makeunique"
            accept="application/octet-stream"/>
        
        <cfset acceptedFileExtensions = "jpg,jpeg,gif,png,pdf,flv,txt,doc,rtf"/>
        <cfset filecheck = listFindNoCase(acceptedFileExtensions,File.ServerFileExt)/>

        <cfif filecheck eq false>
            <cffile action="delete" file="#ExpandPath('\')#MultiFileUpload\uploadedfiles\#File.ServerFile#"/>
        </cfif>

        <cfcatch type="any">
            <cfdocument format="PDF" overwrite="yes" filename="errordebug.pdf">
                <cfdump var="#cfcatch#"/>
            </cfdocument>
        </cfcatch>
</cftry>

Just 2 things in my test:
1) I use no accept attribute. Coldfusion is then free to upload any extenstion.
Restricting the type to application/octet-stream may generate errors. Also, it is unnecessary, because we perform a type check anyway.
2) I have used #ExpandPath('.')#\ in place of #ExpandPath('\')#
<cfif isdefined("form.filedata")>
<cftry>
<cffile action="upload"
            filefield="filedata"
            destination="#expandPath('.')#\MultiFileUpload\uploadedfiles\"
            nameconflict="makeunique">
        
        <cfset acceptedFileExtensions = "jpg,jpeg,gif,png,pdf,flv,txt,doc,rtf"/>
        <cfset filecheck = listFindNoCase(acceptedFileExtensions,File.ServerFileExt)/>

        <cfif filecheck eq false>
            <cffile action="delete" file="#ExpandPath('.')#\MultiFileUpload\uploadedfiles\#File.ServerFile#"/>
            <cfoutput>Uploaded file deleted -- unacceptable extension (#ucase(File.ServerFileExt)#)</cfoutput>.<br>
        </cfif>
Upload process done!
        <cfcatch type="any">
            There was an error!
            <cfdocument format="PDF" overwrite="yes" filename="errordebug.pdf">
                <cfdump var="#cfcatch#"/>
            </cfdocument>
        </cfcatch>
</cftry>
<cfelse>
<form method="post" action=<cfoutput>#cgi.script_name#</cfoutput>
        name="uploadForm" enctype="multipart/form-data">
        <input name="filedata" type="file">
        <br>
        <input name="submit" type="submit" value="Upload File">
    </form>
</cfif>

Upgrade to 10.1.3.4: Problems with multi-select list

Hi,
We upgraded from BiseSEone (10.1.3.2) to 10.1.3.4 (using BI EE). One of the features we were longing for was the improved multi-select list in the dashboard prompts (with a efficient search support). But after the Installation the multi-select list doesn't work at all. There are no data offered and the frames are missing. What could be go wrong here ? There were no problems during the installation. I told the installation to keep the configurations.
regards
Thomas
Hi guru's,
is there anybody around who experienced a similar phenomenon !!!
regards
Thomas
Edited by: tdombrow10 on Jun 7, 2009 10:04 PM

unfortuantely(i beleive i had the same problem)
you have to rebuild them
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Problem with Multi Master Replication

Hello All,
I've setup a multi-master replication with no consumers. i.e i'm having 2 suppliers which should update each other. The setup seems to be fine since the initialization of one supplier by other works very fine. But i couldn't get the synchronization btwn the suppliers get worked. I noticed in the error log that the syn-scan request arrived, but ignored. What are the possibilities of this error ?
Please help me with this regard.
Thanks in advance,
Rajesh

Hello All,
Rich, you have been a support to most of us in the group(indeed much to my help)...Its splendid work....
My problems disappeared after applying the Service pack ....the service pack in fact is mainly to sort out the replication issues.
Advice from my experience - The patch may be more than enough for most of the replication issues.
One observation - i had the replica busy error, but i didn't have to restart the replica as suggested by some of the previous threads. Seems the service pack did some fix for it.
Thank you all,
Best Regards,
Rajesh

Problem with Multi-camera function

Hi!
I have three camera angles - I put them each on different stage but since one guy had a problem and had to stop recording the whole thing got a little messy and I had to divide audio and video tracks to compensate with audio, however two of my tracks are now splitted in two (with blank space inside) and if I use group function - "Set clip marker" is no longer working and I cannot synchronize the video and prepare it for multi-camera editing.
I hope you understand what I mean and thanks in advance for any advise!
Thanks :)

Colin,
I did a multi camera edit of Act 1 of a taped performance and all went well. Moved on to Act 2, which ran longer and each camera needed a tape change. So I matched the clips from each camera on each video track and tried to move on to the sync & then create a multi camera sequence stage of the project. That's when I hit a road block. I could not sync the four video tracks. So I consulted Adobe's on line help and this was all I could find about my predicament:
Note: Adobe Premiere Pro uses an overlay edit when synchronizing clips. Take care not to overwrite adjacent clips if you have multiple clips on the same track.
So what was I to do next? I found your post and now know exactly what to do. Thanks for a great explaination and saving me a lot of head scratching.
Why couldn't Adobe explain it as well?
Thanks,
Angelo

Problem with multi-touch screen when lid is closed

I have a T400s with the MT screen, running a clean installed Win 7 32-bit and all latest Lenovo drivers/BIOS.
I use external screen/keyboard/mouse at work so I am used to have the lid closed. I set in power management in the way that closing the lid does not do anything (e.g., sleep or hibernate).
The problem is: when the lid is fully closed and external mouse is used, the mouse cursor randomly moves and clicks. When random clicks happen, I can see the finger-tap animation near the cursor on the external screen, suggesting that the MT screen receives input even when the lid is closed! It might be heat from the palm rest/keyboard area causing fake taps.
Leaving the lid slightly open (like 15 degrees) solves this problem.
EDIT 1: another clue of the above problem is that while the lid is closed, Windows 7's tablet input panel shows up on the left edge, which typically appears after a tap or a tablet pen gets close to the screen. I also noticed that the random clicks take place near the right edge of the screen.
Solved!
Go to Solution.

@ wesleyyin,
certainly strange. Some questions to help with the diagnostics;
Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
Can you try disabling the TrackPoint to see the problem goes away?
Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Problems with Multi-language Translation (OMLT/MLT1)

SAP B1 logon takes a lot of time when a user logs on to a database with many translations.
The logon time seems to increase exponentially with the number of records in the mlt tables.
For the moment we have translated only one field in 2 languages (ItemName of OITM)
- there are 20000 articles in the database, translated into 2 languages -> 40000 records in mlt1.
Our customer will have 50000 articles translated into 4 languages when he goes live.
Here are some logon times
logon time (in minutes)     |     records (OMLT/MLT1)
10:00               |     20000/40000
02:39               |     10000/20000
00:45               |     5000/10000
00:13               |     2000/4000
00:05               |     1000/2000
When using the sql profiler, the last statement just before the client seems to hang is:
SELECT T0.* FROM [dbo].[MLT1] T0 ORDER BY T0.TranEntry,T0.LangCode
Then, after the elapsed logon time, the next statement is
SELECT T0.* FROM [dbo].[CHEN] T0 ORDER BY T0.Component,T0.ID
So it seems that all the translations are read at logon time, and stored in a very inefficient way.
We have the same results when we connect to the database via the DI-API.
Does anyone know if there is a fix available (our current version: SBO 2005A SP:0 PL:06

I think the problem has been identified - <u>should</u> be possible to solve in short-term (no guarantee )...
Frank
Edited by: Frank Moebius on Sep 22, 2009 11:39 AM
The bug - which caused most of the trouble - had been fixed in 2006 - connection time has gone down to about 1/50!
However, the design (loading translations when logging on) has not been changed so far. Subsequently using a large number of translations may still cause connection times which may be considered "too long".

Problem with multi aux in jack

Similar Messages

Maybe you are looking for