Problem with my canon ir c3170i

when i print a letter type sheet with my canon ir c3170i printer in the office in landscape for both sides, it prints one side in one way and in the other side in the opposite way. i want to be able to print for both sides in the same direction, what cold be happening?

I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
THANKS ANYWAY

Similar Messages

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

  • Is anyone else having problems with the Canon Online Store?

    In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
    I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store.  They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
    Is anyone else having problems with the Canon Online Store?
    Why does Canon not care to track reported problems with the storefront part of their web-site? 
    I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far.  Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not.  In trying to register that lens, I looked up on the Canon web site where to find the serial number.  Since my new lens did not have any numbers there, I was concerned I had been sold a fake.  But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was. 
    Is Canon like that with other problems, as well?  Or is their "batting" average better than my very limited experience? 
    I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral":  EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)! 
    Regards and Thanks,
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

    Hi Danny.  Thanks for replying.
    I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years.  And, yes, it is the latest version.  Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT?  WHEN did Canon STOP SUPPORTING Firefox?
    I've been told that there are 2 pending orders in my account.  Yet, I NEVER placed those orders!  WHY CAN'T CANON SEE THAT THIS IS A PROBLEM??? 
    Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place!  But, maybe that's a bit too grown up of an answer for you! 
    "Award-winning" support???   And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS???  The OSTRICH?
    Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
    Thank you for your "prompt" attention to this matter!
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

  • I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

    I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

    These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
    Good luck,
    Clinton

  • I am trying to download my photos into I photo with my new Nikon S6300 camera and keep getting the message  The file could not be imported the file is unrecognizable format had no problems with my Canon camera

    Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help

    I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
    However today I tried to download six photos.
    None would download including several others for a total of 21 that would not download.
    Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
    However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
    (1) Put a fresh battery in the camera - same results
    (1.5) Used a different port in the new hub - same results
    (2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
    (3) Tried again using the cable - still same error
    (4) Changed cables - my husband has the same camera - still same error
    (4) Put the card in his camera with his cable - still same error
    (5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
    (6) Moved the offending one image to the Trash while the card was in the card reader
    (7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
    Conclusion:
    Not the camera
    Not the cable
    Not the hub
    Must remove bad photo from the card
    However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
    Any idea why this is happening now?
    Thank you

  • Problems with a Canon eos T2i

    I used my Canon T2i without problems for over a year and I am very pleased with it, but try taking days ago a video after  have been taking pictures in program mode and the camera will lock and no picture could be taken, only appeared one minute later a pattern with vertical lines ... try removing the battery to see if it unlocked and nothing happened, every time I tried to take a photo red light indicates that the camera is processing, (acces lamp), remained continuously lit and not seen any photos. If anyone can help me solve this problem would be very grateful.

    forgive me my bad english
    i have this problem and a canon service centre took a look at it. They informed me that is would be a mainboard error. It needs to be replaced. Would cost me 250 euro's. 
    I took the camera home to think about it. After a few weeks i tried again and....it works fine. I could take pictures again. But when i tried movie it freezes again with the typical distortion on the lcd. Needs to reset by taking out the battery. After a few weeks it got the error again with taking pictures. Nothing helps. Tried to put it away 2 weeks but that did not resolve the problem. 
    i tried everything. Firmware, ML, other sd card's, lenses, and then i saw this possible solution for an error 70. Not my error but you never know.
    --power down camera and remove battery
    --power down HDMI device or powered adapter
    --unplug the HDMI from the body, then plug it back in
    --power up HDMI device or powered adapter
    --insert battery and power up camera
    and gues what. It works perfectly. NOT the video function. It's still freezes. But taking pictures is working for months now.
    Before it would give the error when i stressed the camera with continuesly shooting at sports or something. Then it became slower en suddenly it would stop and give error 80. And now i can do what i want. It keeps working.
    It's worth i try?!

  • Problems with some Canon Raw files

    I'm having a very frustrating problem and would be interested in seeing if anyone else has seen this.
    I have images shot in raw with a Canon 1D Mk II. Some of the files cannot be rendered in Aperture - they show a gray thumbnail and the red "unsupported file format" display in Viewer. If I open the Library package and navigate to these files, I can view them fine in every other browser/converter - ACR, Capture One, DPP, iView Media Pro, Bridge.
    Preview is also unable to view the image as I'd expect with the same error as Aperture.
    I do know about the Photo Mechanic problem, but I don't use that app. It's not a firmware issue since I have images taken on the same day - some display some don't. I've tried importing multiple ways, making sure there is no metadata assigned, everything I can think of but no luck.
    Even though most of my hair is already gray, I'd like to keep it if possible, but this has me ready to pull it out.
    Any ideas?
    Thanks much,
    Jon Canfield

    I shoot with a 1Ds and 5D and previously with a 1d and 20 . I have also seen this problem with 1D files and 1Ds files and I think it has to do with if the file had been opened in another raw converter and left with the raw adjustments in embeded. I say this because the files it gives me in grey are ones that I opened but didn't edit. I will try opening and saving in another software and then to bring back into Apeture, though the more I have to use PS CS, Bridge, DPP, or other package the less I think Aperture is going to provide a complete solution for me.

  • Problems with using Canon LiDE 210 and OSX 10.7.4

    I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

    Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
    Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
    http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
    http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
    I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
    Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
    At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
    So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
    I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
    Does anyone have any experience of this issue, does anyone know how I might resolve it?
    Many thanks,
    Jeff

  • Problems with installing Canon mp460

    Im not able to install the drivers for my Canon MP460.
    I dont got the install cd anymore, but have downloaded the new drivers from canons site.
    I have done everything thats noted in this post:
    http://discussions.apple.com/thread.jspa?threadID=1322537
    But it did not help. Beside I dont got the CanonPrinterDrivers.pkg file in the Macintosh HD, Library, Receipts folder.
    When installing the drivers downloaded from the canon site I cant find it listed in "Printers and faxes" in the preferences pane.
    Anyone know what to do?

    Hello sestian and welcome to Apple Discussions.
    The Canon driver for this machine has only been designed to work when the printer is directly connected to the Mac via USB. If you have it connected to a Windows share, then you will not find the Canon MP460 when you search through the Print Using menu.
    Note that you cannot browse for the Canon driver at any stage. The driver software has been designed to select the print model automatically when the printer is detected during the Add printer stage. If the printer is not detected, then the driver is not added and the user does not have the ability to browse to it.
    If you do have the printer directly connected to your Mac via USB, then you may have a problem with the cable, as the other person suggested.
    Pahu

  • Problem with my canon printer mx890 error codr u052

    my canon printer mx 890 problem with error code u052 the type of printer head ios incorrect.this is out of the blue, I have been printing successfuly, nothing has changed

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • Print quality problems with bluetooth Canon ip90 printer?

    I've had this problem on prior PBs and the canon website is decidely NOT helpful so here goes....
    I have a pixma ip90v printer with a bluetooth adaptor added to my MBook. It prints fine and I had no problems adding it to my new computer (it was originally used on a PBG4 and I had the same problem which is...) - every now and then the print quality goes to a light purple as if it's trying to save memory. Has anyone else encountered something like this?

    Try resetting the printing system http://support.apple.com/kb/PH14141
    You'll have to reinstall your printer after the reset.

  • Staple problem with printer Canon iR-ADV 8205

    Hello,
    I work with output designer 5.7 and when i try use option staple with canon printer Canon iR-ADV 8205 the document is print and staple, but the pageconter is equal zero. What can i do for print my document correctly?
    Thanks Julio.

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • I am having problems with my canon mg2520 trouble code 5,156,69

    My scanner quit working. the printer prints and when doing a manuel scan I can perview the scan but it will not scan the material and place it in a file.
    I am using a Dell Insp. 660s or 6605 desk top computer running windows 7 home premium and service pack 1. My printer/scanner is a Canon mg 2520.
    When attempting to scan i get a code 5,156,69 and message telling me the printer is either not connected or turned off.
    The printer connects just fine and prints with no faults but wont scan.
    I have rebooted the computer and uninstalled the printer. reinstalled the printer and get a message that drivers are not installed. I use the installation disc to reinstall the drivers but get a message that the printer cant be found. How ever the printer still prints just fine.
    I have run tuneup utilities and found a lot of problems and corrected them still have printer but no scanner.
    I red your forums and performed the process for repairing a scanner with trouble code 5,156,61 on a mg2120 and a dell lap top but this also failed. I know this is not the same code I have but the complaint was the same. 

    Hi Toyvo,
    Since reinstalling the printer using the installation CD did not resolve the scanning issue, we can try downloading the latest drivers from the Canon USA website.  The following link will take you to the initial download page for your PIXMA MG2520:
    PIXMA MG2520 Drivers and Software page
    Once on the initial download page for your model, please do the following:
    1.  Verify that your operating system type is selected correctly in the OPERATING SYSTEM field.  If it is not, please select your operating system from the drop-down field. 
    2.  Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the FULL DRIVER AND SOFTWARE PACKAGE file.  When you do, another page will appear giving details of the file you are about to download will appear. 
    3.  Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button.  After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver.  The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded. 
    Once the new drivers are installed, please restart your computer and attempt to scan. 
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Problems with a Canon i-sensys LBP6000 printer!!! Help me please!!!

    Hello!
    I just bought aprinter Canon i-sensys LBP6000 and I can make it work on my MacBook Pro(version 10.7.1). I downloaded the driver from the Canon website and I have installed it on my laptop very easyly.
    http://software.canon-europe.com/products/0010907.asp
    But the problem is that when I want to configurate the printer I go to: System Preferences/Print andScan/  I don’t have the option of Add “Moreprinters”, so I don’t know what to do!!!
    Does anybody have the aome problem??? Can anybody help me please????
    Thank you very much!!!

    When using your link it shows that the Canon Europe web site only has the v3.30 driver for the LBP6000. This driver does not support Lion.
    So if you download this v3.36 CAPT driver from the Canon Australia web site, you will have the correct driver for Lion, and if you refer to the document "Registering_OS_X_Lion_en-uk_R.pdf", which is included with the driver download, it shows that you do not use More Printers but the IP > LPD protocol instead.

  • I am having problems with my Canon S100 camera. The shutter is not working correctly.

    I hope this is the right place to post a complaint about my Canon S100 camera's shutter not working correctly.  My daughter purchased two of these cameras, one for me, and one for herself.  Both cameras are having the same problem.  I hope Canon can help us with this serious problem.  What good is a camera if it does not take pictures?

    Stephen (Canon),
    I find it quite surprising that you do not respond to 28 pages of comments regarding this issue on the other thread and yet you directly comment here.
    Seems to me that the problem arises after significant use as the contacts in the shutter switch corrode and do not get the contact that they once did.  With many users this occurs just outside the 1yr warranty. However, it is clear that this is a design fault as opposed to natural 'wear and tear' and therefore I would expect that a company with Canon's reputation for excellent service would offer free repairs.
    Can you please confirm if Canon are preparing a response on this issue?
    Regards,
    Neil Walker

Maybe you are looking for