Problem with my exe code

Hello,
I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
Ahmet
Attachments:
front panel1.jpg ‏47 KB
Oksijen_Atolyesi.vi ‏45 KB

Hi Ahmet,
when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Oksijen_Atolyesi.vi ‏35 KB

Similar Messages

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Problem with explorer.exe when LR starts

When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAM

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Problem with PadExe.exe message occurs at the boot-up

On booting up, which takes anything up to 30 minutes and more, I receive a message that there is a problem with PadExe.exe
It seems that padhook.dll is the problem. Putting PadExe or PadExe.exe into the search facility on the Toshiba site reveals no answer.
Does anyone know how I can resolve this problem? The slow boot up I can live with (just don't switch off!)
Thanks for any help.
Ray

This could be an part of the Toshiba Touch and Launch software.
Toshiba Touch and Launch offers easy movement and freedom of programs navigation with TouchPad
I see only one way to solve such error messages. Try to remove this software from the OS and after clean removing and booting you should install it again.

Problem with searchsettings.exe (Mozilla Malware)?

For several days I have had a screen that comes up on boot-up that says basically there is a problem with SearchSettings.exe and it will not start. I did some research and see that it is part of an iObit toolbar system and is basically malware. I found a fix online, but it didn't work so I had to restore. I think my registry cleaner might have remove part of it but I can't find out how to get rid of this annoyance.

Hello,
Here is a guide on how to remove searchsettings.exe:
http://www.spigot.com/remove-search-settings.html
It was part of a toolbar and probably the registry cleaner deleted the uninstall files for the toolbar.

Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?

You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

Hi,
I have problems installing LMS 3.2. I get the following error during the installation process:
I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Problem signature:
Problem Event Name:                        BEX
Application Name:                             setup.exe_InstallShield
Application Version:                           15.0.0.603
Application Timestamp:                     4a030a42
Fault Module Name:                          ErrStack.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  4a1c4e04
Exception Offset:                                02ac26a0
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.0.6002.2.2.0.274.10
Locale ID:                                             1033
Additional Information 1:                  b2be
Additional Information 2:                  82109204b3973566ace818217390e302
Additional Information 3:                  9025
Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Regards
Mathias

This looks like CSCte84743.
Symptom:
Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant. The error seen will be related to OpsConfUpdate.exe:
The application has failed to start because GGShared.dll was not found. Re-installing the application may fix this problem.
Conditions:
This can occur on Windows 2003 and 2008 servers. The underlying root cause is still not known.
Workaround:
Configure the following registry key value:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
Then, a clean installation of LMS should be performed. Once LMS is installed, this registry key value should be removed.
However, the problem with the page not found error could be CSCtb17186. If you try Firefox and get a redirection error, then that would confirm this bug.

Office Home and Student 2010 Install problems with a Key Code Err..

I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....

Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I would like for you and maybe a co-worker to check these.. before I make any changes in system..
How to Change the Trusted Installer name...
1. Right Click on the File Or directory.
2.Click On properties, on the Right Click menu.
3.Click On "" Security "" tab
4.Click On " Advanced" Button on the bottom.
5.In the advance Security Dialog Window, Click on "" Owner "" tab
6.Here you will able to see the Current Owner ( ie: Trusted Installed )
7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
9.Click the ""OK "" and exit this window.
10. Click "'OK"" again, to exit completely from the Properties window..
11. Repeat Step 1 to 4 to open the object's Properties Window again...
12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
group....
http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders.

CS4 Problem with Acrobatinfo.exe

I'm having a really obnoxious problem with CS4 (as far as I can tell, every part of it, tested with InDesign, Acrobat, Illustrator and Photoshop).
Every time I open an Adobe application and every 30 second to 3 minutes thereafter, my system hangs for a few seconds, with stuttering screen updates and then the whole screen flickers with a greenish tinge and then goes back to normal.
I've managed to track down the problem to the process Acrobatinfo.exe. Once I started watching the tack manager, I noticed that, without fail, each hang and flicker was preceeded by about 15 seconds of Acrobatinfo.exe starting, sitting around and then peaking at 50% CPU (all of one core/processor I imagine). Shortly after that, the process closes and everything is good again for another few minutes.
System is Windows XP, SP3. 2GB of RAM (and this happens even if nothign else is running). All windows and video card drivers are completely up to date.
Is anyone else having this problem? Any ideas on how to solve it?
Thanks
Tom

After over 10 hours of pain, I've finally solved this problem. It was the Adobe Improvement Program.
I discovered this after noticing that none of the other accounts on this computer had the problem I was having, so after hours of painfully rebuilding my profile from scratch and testing as I went, Acrobat asked if I'd like to join the program.
The second I signed up the same flickering and hangs started up again, and as soon as I said "no !@#$@#!$ thank you" it fixed the problem.
Apparently declining to join the program just on Acrobat set a global setting, as none of the other CS4 apps exhibited any slowdowns after that.
I am livid at the time I wasted tracking down this ridiculous bug, and hopefully this provides some help to others who experience similar problems.

Problem with PHP, CSS & Code Navigator in CS4

Hi,
I've got al little problem with code navigator. To show the problem, I created this 3 files:
test1.html
The CSS-Definition is defined static, with simple HTML.
<html>
<head>
     <style type="text/css">
          @import "test.css";
     </style>
</head>
<body>
      <p>Hello World</p>
</body>
</html>
test2.php
The CSS-Definition is defined dynamic, with PHP-Code.
<html>
<head>
     <style type="text/css">
          <? echo "@import \"test.css\";\n"; ?>
     </style>
</head>
<body>
      <p>Hello World</p>
</body>
</html>
test.css
The CSS-File which is imported in test1.html and test2.php
p {
     font-size:20px;
The Problem in Dreamweaver CS4
When opening the test.html - File in Dreamweaver CS4, I can easily see the CSS-Definition of the <p>-Tag in Code Navigator. To edit these definition I can simple open the test.css by clicking on the definition in Code navigator. For a complex webpage this is a greate feature. Sadly, this does not work, when I open the test2.php. Although when going to Live View and selecting the <p>-Tag I can see the CSS-Definition and the file in which it is defined in Code Navigator. But by clicking on the definition the test.css DOES NOT OPEN!
Has anybody a solution? Because many of our projects have dynamic CSS-Definitions, it would be a shame, if this would not work.
Tanks for help! :-)

I've done some testing, which might point you in the direction of an interim solution.
This is the code for related_files.php:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Related files test</title>
<?php include('include.css'); ?>
</head>
<body>
<p>This is a paragraph.</p>
</body>
</html>
This is the code for include.css:
<style type="text/css">
p {
     font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
     color:#F00;
</style>
Note that the include file contains the opening and closing style tags.
By including your styles like this in a PHP include file, Dreamweaver applies the CSS in Design view (you don't need to turn on Live View). Holding down the Alt key while clicking in Design view brings up the Code Navigator with all the details of the CSS. The one missing link in the chain is that clicking the style selector in the Code Navigator does not open the CSS file. However...
The file that contains the CSS is listed in the Related Files toolbar, so you can edit it in Split view, and see the results in Design view in exactly the same way as with an HTML page and ordinary style sheet.
As I say, not the full solution that you wanted, but it might be something worth experimenting with.

Execution problem with java.exe

Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM.
I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I supposed it because it's written in the console when I run the project).
Thus, I wanted to try to launch my application by myself, to check if everything is right...
My project is composed like this :
- creavea/src : the sources of my project (a package called "main" , and a package "com.creavea. ..." and other .jar files like a MySQLConnector/J, edtFTPj, the JOutlookBar by lf2prod, ...
- creavea/bin : Eclipse puts the binaries there, when I run my project.
- creavea/files : Somes files like configuration files for my application, etc ...
- creavea/images : Images for my interface.
- the main class, containing the pubilc static void main method, is called CreaGesta, and is in the "main" package.
creavea is the name of my project, but i think you supposed it !
I want to run the binaries, then i do this :
- I open a ms-dos console
- I'm going in the C:\eclipse\workspace\creavea\bin folder
- I execute the command : java main.CreaGesta ...
And it doesn't work :'( ! An error appears :
Exception in thread "main" java.lang.NoClassDefFoundError : com/lf2prod/common/swing/JOutlookBar.
This class, JOutlookBar is used by my application, and the jar file containing the class is in my /bin folder. I can't understand, i'm a little bit disapointed.
It's my first big project in Java, then i don't really understand what's happening. So if someone can help me, it will be really nice for me ! Thanks a lot for your help !
J�r�me - Belgium

Thank you for your reply Atmguy ! I put in my command the classpath of the jar's who are in my /bin folder.
Like this : java -classpath edtftpj-1.4.9.jar; jdom.jar;l2fprod-common-outlookbar.jar;mysql-connector-java-3.1.8-bin.jar main.CreaGesta But now, i've got an other error message :
Exception in thread "main" java.lang.NoClassDefFoundError : main/CreaGestaOh, it changed ! but I don't understand the problem . What does it mean? "Java cannot find the class main/CreaGesta", or "An error occured in main.CreaGesta" ?
Can somebody help me to solve this new error ? Thank you !

Problems with the postal code in address iview ESS.

I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

Problem with inserting html code.

Hello,
I have a problem with the inclusion of this code html connected to the CSS style sheets:
<head>
<link href='http://fonts.googleapis.com/css?family=Raleway:320,320,300' rel='stylesheet' type='text/css'>
<link rel="stylesheet" type="text/css" href="assets/normalize.css" />
<link rel="stylesheet" type="text/css" href="assets/demo.css" />
<link rel="stylesheet" type="text/css" href="assets/component.css" />
</header>
    <div class="grid">
    <figure class="effect-lily">
    <img src="assets/1.jpg" alt="img01" class="effect-honey"/></figure>
</a>
</section>
</div>
</body>
</html>
1) Does not appear in the preview thumbnail adobe muse.
2) The pull-down menu or previously entered disappears from display problems once exported the site in html.
Removing the html code menu work correctly.
Where is the problem ??

Most likely there is a critical code error somewhere. Use the W3C validation tools to check your CSS and HTML code.
CODE VALIDATION TOOLS
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Problem with BRIGHT.EXE in QOSMIO G40

Hello and good morning,
I'm a new user here at the forum, and i hope i'm posting in the right place :).
I just bought, well in march a Qosmio G40, and i'm very pleased with it, but 3 days ago I noticed a problem with it, the program BRIGHT.EXE, which controls the brightness of the flatscreen is not working (well, it stoped working), when i press the button in the operacional front panel, or use the combination FN+F6 or F7, it doesn't work, windows says that the program BRIGHT.EXE gave an error but doesn't specify which error.
Does anyone have any idea of why it is happening and a way to solve it ?
Best,
Ricardo

Thank you guys for your answers.
I'll try first to install the Value Added Package first. Do I have to uninstall the version i have first? or can i start the instalation and it will uninstall automatically ?
And then if the re-installation won't work, i'll try to rollback my OS.
Ricardo Monteiro
BTW: as i have Vista in Portuguese (:( ) i still don't have SP1 ehehe
Message was edited by: ricardo_monteiro

Problem with my exe code

Similar Messages

Maybe you are looking for