Problem with NetWeaver Developer Studio
I have NetWeaver Dev Studio 2.0.9 installed. I have JDK version 1.4.2_11 also. The environment variables are all set properly.
I can create a new Java project without problem, but any time I try to create a new "Portal Project", I get a "Invalid Project Description" error. I also get this same error when I try to import a .par file. The project paths are named differently from the file names, etc.
I have uninstalled all JDKs, JREs, etc, and uninstalled Netweaver and reinstalled everything, to no avail.
Any assistance in this matter would be most appreciated.
thank you,
K.
Hi
To solve your problem you need to copy all your workspace contents to some other place .
Uninstall your NWDS & Delete all the previous Workspace.
Reinstall NWDS & it will work fine .
All The Best
Priyanka
Do reward Points.
Similar Messages
-
Problem with netweaver developer studio for sp9
Hi,
Presenty we are on ep6 sp10 and we have downloaded dev studio for sp9 which is available on sdn.we have j2sdk1.4.2_06
the problem is that when i deploy a par file from netweaver and try to create an iview based on that par it gives me the following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.navigation.ToolAreaiView.
Exception id: 04:25_03/03/05_0005_4061050
See the details for the exception ID in the log file
The strange thing is that if i use ep6 sp2 dev studio it works fine. So is there any problem with sp9 dev studio?I think that with NWDS the SP of the portal and NWDS much match.
Hope it helps,
Patrick. -
Help With Netweaver Developer Studio Version
Hi everyone I have a problem, I am doing some examples to programmer Web dynpro using netweaver developer studio, How can I know what is my Netweaver Developer Studio version? Because I have a trial version and I dont know if my version is compatible to doing some examples, for example I found this link
Web Dynpro Java Tutorials and Samples NW 2004
and I wanna doing the example "Using EJBs in Web Dynpro" and when I open this document it starts with SAP netweaver 04 and I don't know if my trial version is compatible with this example.
ThanksIsrael,
Open your NWDS, go to Help/About.
Most likely you will see something like:
Version: 7.0.11
If version is 7.0.X, your NWDS is NetWeaver 7.0, formerly known as NetWeaver 2004s.
Most likely there will be no problem running examples from NW 2004, earlier version.
Just make sure your JDK you have on your dev computer has similar version as JDK on the target server, if you are building locally and deploying your application to another server.
Post if you have a different version.
We will guess what NW version it belongs to.
Regards,
Slava -
Can't create portal application project with netweaver development studio
Hi All,
I want to follow the toturial (http://help.sap.com/saphelp_nw04/helpdata/en/9e/7d96f7087311d7b84600047582c9f7/frameset.htm) to create a portal application with netweaver , but I am failed at the first step, I can not found "Portal Application Project" option by new->other.
the version of netweaver development studio I am using is
Version: 7.2.0
Build id: 200702220224
do I need to install a plug - in? if yes, anyone can tell me where to download it?
thanks & regards, BinHii...
In NWDS goto Windows> Open Perspective> others--> Enterprise portal select this and ok....
Goto File> New> Project> select Portal Application> enter project name and click ok...
refer this blog also...
Overview of the Content Development Process
regards,
Chinnadurai.R -
How to use Servlet 2.4 with Netweaver Developer Studio 7.0?
Hello,
When I define my web.xml as follows:
<!DOCTYPE web-app version="2.4"
xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
I get an error in french: "La DTD du type de lélément racine "" doit se terminer par '>'."
Saying that the DTD of type of root element must end with '>'
How can I solve this error?
Thanks for your help,
Tanguy MezzanoHi,
Tanguy Mezzano wrote:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app version="2.4"
xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" >
There is a " (double quote missing in the xsi:schemaLocation attribute. This is the reason. I am guessing that you may have tried manually editing this web.xml file and may not have correctly edited it.
To correct the <? xml ?> and <!DOCTYPE> tags - please openup a blank Web Module Project and copy these two tags only from the web.xml and overwrite the same tags in your web.xml.
Hope that this helps.
Thanks.
p256960. -
Problems Installing Netweaver Developer Studio 7.0 SP 15
Hello friends,
I have currently NWDS 7.0 SP9 installed. I need to install NWDS 7.0 SP15. For that I have downloaded the JIDE15_0-10003480.SAR file from Service Market place. I don't know what to do after that.
Please can anyone help me on this.
Points guaranteed.
Thank You
AvikHi,
SAPCAR is a executable. you can find it in \usr\sap\<SID>SYS\exe\run.
You can execute the "sapcar -xvf <filename>.car"
Note:
Using JSPM we can deploy the sar file.
For JSPM , no need to uncar the file. It will directly uncar and deploy it.
Try with JSPM to deploy the SAR file.
Regards,
Bala. -
NWDS: NetWeaver Development Studio
Hi,
I begin to learn to create a Java mapping and I have a question about NWDS.
Our NWDS uses the version 2.1.2 of Eclipse.
Is it normal?
Is there a mean to use the version 3.0? (more user-friendly)
Thanks
MickaelHi Mickael,
Please post this question on the portal and application server forums-you will get a better response:-)...btw, here are some threads which have discussed the same question:-
eclipse version of netweaver developer studio
Using Eclipse plugins with Netweaver Developer Studio
Eclipse Release of Netweaver Studio and other plugins
Regards,
Sushumna -
NetWeaver Developer Studio - error
When working with NetWeaver Developer studio (NWDS), sometimes we get an error which says <b>"An error has occurred. See error log for more details."</b>
No further details are given. Which error log is it referring to? Where can it be found?
Thanks in advance!!!Sandeep,
in your NWDS select menu Window->Show View->Other and select PDE Runtime/Error Log in the dialog.
Regards Stefan -
Problem with Management Console for Netweaver Development Studio
I installed the Netweaver Development Studio and all works fine
Normally the MMC shows SAP Systems and a J2E instance below it which is used to start the services
But when I shutdown my machine and restart it again the J2E item below the SAP Systems does not appear and I cannot restart the J2E/SAP/DB/J2EE services
Is there another way I could restart all the related services from a batch file or a utility that takes a config file
because for the last few days I am having to re-install the Developer studio to get it to work
Please help me on this because I am wasting atleast 2 hrs daily to reinstall so that I can control all my services
thanks
TonyI think I temporarily fixed this problem I am not sure how this will affect the development.
But atleast I can start the J2EE/DB services so that I can start and stop services from the MMC
What was happening was that the services
SAPJ2E_00
SAPJ2E_01
were not starting up because of the logon problems, the default account that was created SAPService( something like that ) was not able to log on, I changed the logon permissions to "Local System" and started the service, this time atleast the service started.
I need to launch the Development Studio and see if I am able to work with the new account permissions on the J2EE server -
Netweaver Developer Studio 7.0 - Problems with MI Plug-in Configuration
Hi,
I installed the NetWeaver Developer Studio 7.0.11 and have problem when configuring the MI Plugin. The configuration page does not save the settings and then it just doesn't show any fields in the screen. Does anyone has the same problem?Any ideas? Thanks in advance.Hello Jon,
I agree, but 2 GB RAM is sufficient to run the NWDS efficiently, consider the following points to increase its performance.
1. Tweak your eclipse.ini : This will increase the memory usage of Eclipse, but will give you the best startup and working performance. If you think eclipse is using up too much memory, lower the Xms, Xmx and PermSize values.
-startupplugins\org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar--launcher.XXMaxPermSize256m-vmargs -Xms256m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:+AggressiveOpts-XX:+StringCache-XX:+UseFastAccessorMethods-XX:+UseLargePages-XX:LargePageSizeInBytes=4m-XX:AllocatePrefetchLines=1-XX:AllocatePrefetchStyle=1-Dide.gc=true
2. Disable the un-necessary startup plugins
It loads up certain (un-necessary) plugins at startup. We can tweak this a bit to improve the startup performance.
Go to Window > Preferences
Expand General and select Startup and Shutdown
On the right side, uncheck the plugins you don't want to start. Usually, you can uncheck all of them. Don't worry, it just makes the startup minimal. Once you need to access the module in the IDE, it will start it up.
Click OK and restart IDE.
BR
Satish Kumar -
Problem launching Adobe Designer in Netweaver Developer Studio
Hi All,
I have successfully (I believe) installed all the components required to have Adobe Interactive Forms running on WAS 6.40 (SR1), in accordance with Achim Hauk's blog 'My struggles with the Adobe Document Services in WAS6.40' (thanks Achim!).
When I go to try the Interactive Form tutorial, and I launch the Adobe Designer 6.0 from Netweaver Developer Studio (version 2.0.9) by right-clicking on my InteractiveForms UI element and selecting 'Edit', I get a popup error 'An error occurred decoding Base64 data - encoded data is invalid or corrupted'. Does anyone know what this means and how to correct it? When I press the OK button on this popup the Adobe Designer is correctly launched, however any changes I make within the Designer don't seem to be saved.
Any help would be very much appreciated. Not sure if it makes any difference, but I have Adobe Reader 6.0.2 installed on my client.
Thanks
John MoyHi John,
I've installed the SP15 sneak preview last weekend. Based on my experience, if you are not using SSL set up, you only need three steps to set up ADS.
1. Create user ADSUser and user group ADSGroup
2. Set up basic authentication
3. Set up credential file
Now, step 1 and 2 which is in the guide is already done when you finish the installation of sneak preview SP15. All you have to do is to set up credential file.
I was having problem with Read timed out issue, and Markus pointed that web service time out need to be increased in my case. I haven't tested it yet since I am away from my PC, but i'm pretty sure it will fix the time out problem.
Also if you download the credential a while back, that file will expired the end of this month (Feb). Markus has posted a new credential file which will expire in June.
Regards,
Iwan -
SAP NW Developer Studio: Problem with Import Development Configuration(DC)
Dear Experts!
I have a problem with SAP NetWeaver Developer Studio when import a Developement Configuration.
I create a Software Component(SC) in SLD( with Dependencies: SAP J2EE Engine, SAP Java Tech Service, DI BUILD TOOL, Then I create a Development Configuration(DC) and add this SC.
On SAP Netweaver Developer Studio I import this DC. I see on the Component Browser My DC include: my software conponent , and SCs: SAPJEE, SAP_BUILDT, SAP_JTECHS but in DC detail there are nothing. So I cannot create the Development Component
Please help me resolve this issue.
Thanks allHi,
you cannot see the DCs (for SCs like SAPBUILDT, JTECHS, JEE, etc) in NWDS, because there is nothing imported into the buildspace(s) DEV (and cons).
You need to go to the http://<host>:<port>/devinf -- CMS webui, to the Transport Studio, go to the Check-in tab, and check-in all the software you can see in the queue (which you have also added previously in SLD for your software) . This is a quick process, you'll see your software moved to the Development tab and waiting for import.
Import all the components. This can take longer. As soon as all of them finished, you can open up your NWDS again. In order to see the DCs this time when you expand the corresponding node, you need to reimport (but at least) update the development configuration (you do it in NWDS in the context menu of the development config in question).
Best Regards,
Ervin
Edited by: Ervin Szolke on Sep 2, 2010 1:26 PM -
SAP Netweaver Developer Studio Updatesite problem
Hi,
I have installed SAP Netweaver Developer Studio CE 7.1 SP09 in my desktop. I am trying to connect to local update site.
I am getting the below mentioned error.
Network connection problems encountered during search.
Unable to access "http://<host_name>:<port>/updatesite".
Error parsing site stream. [The XML stream is not a valid default "site.xml" file. The root tag is not site.]
The XML stream is not a valid default "site.xml" file. The root tag is not site.
Error parsing site stream. [The XML stream is not a valid default "site.xml" file. The root tag is not site.]
The XML stream is not a valid default "site.xml" file. The root tag is not site.
I have updated the com.sap.ide.update.autostart.prefs file with the local update site. Also I have provided the proper network connection details in windows -> Preferences -> Network Connections.
Please let me know the solution for this.
Regards,
Kalainila BHello Kalainila
Are you able to access;
https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710
what error are you recieving?
Thanks
Kenny -
Is SAP NetWeaver Developer Studio Version: 7.0.12 Compatable with JDK 1.5
Hi
I want to user Java SDK version 1.5 instead of 1.4.
Is SAP NetWeaver Developer Studio Version: 7.0.12 compatible with this or not.
Please let me knowHi
If you are using EP 7.0, then NWDS 7.0.YY version need to be used. //YY depends on your patch of EP7 .As you have mentioned your are using NWDS 7.0.12, that means your portal SP level is SP12.
In my prject i am using JDK 1.4 for NWDS 7.0.15 and its works fine.I have asked two of my colleagues , they told that in their project they are using JDK 1.5 for EP 7.0 server and application is working fine for them.
So
Thanks
Susmita -
Problem in creating a web dynpro application in netweaver developer studio.
Hi,
I have installed Netweaver developer studio. while creating a webdynpro project by selecting File->new->project, It doesn't display "web dynpro" option in the project wizard dailogue box.
Please suggest how to resolve this issue.
Thanks.Hi Babu,
Make sure following plugin folder
"com.sap.ide.webdynpro.ui_xx.yy.zz(for ex:com.sap.ide.webdynpro.ui_2.0.0)"
exists in your ecclipse root folder (for ex:C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\)
It is responsible for the UI selection elements in File->New Project->WebDynpro selection.
If it's not there you will have to copy it. check also other webdypro plugins installed correctly. these plugins comes with default installation of SAP WEBAS.
if all plugins not installed then redo the whole installation but at the same time make sure all plugins installed correctly.
reward points if usefull
Thanks
Praveen
Maybe you are looking for
-
Not sure if an update broke pacman and resolv.conf
Hey guys Sorry about these noobish questions but I have googled and i just cant seem to find a solution. Couple of things. First, I did a "pacman -Syu" and update the system earlier today. Then, I tried installing a package and i saw pacman
-
I need to be able to type in Arabic on my macbook. I figured out how to change my typing language into Arabic but as soon as I type a word into a word document, I hit the space bar and it moves all the letters around. I was told by the help desk at m
-
HT1473 how do I add tones to my tones file to used as ringtones on my phone
How do I add tones to my Tones on Itunes to use as my ringtones
-
Can i get memory map to work on my 5800 ?
the instructions say your phone must have windows sync 3.7 (iirc) and you can plug in mobile and get it working. i have all the software on my comupter but it cant see my phone
-
How do I get CS4 Licence number update, when program not deactivated before system rebuild
My laptop recently had to have a clean system rebuild, when I got it back i couldn't get the licence numbers to