Problem with new firefox tabs and window focus

Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off. :x
I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
firefox www.archlinux.org
focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
DE is xfce4, and the system is completely up to date.
I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
TIA.

Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
Links -> Open links from other applications in: New tab
Events-> Tab Focus -> Focus/Select tabs that open from: <all>
However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
Anyway, thanks again. I think I need to keep looking.

Similar Messages

Is there a problem with new Firefox and Gmail?

I cannot get Gmail to work consistently with new Firefox. sometimes it loads, sometimes it lets me enter my password details and then crashes; sometimes I can view my inboxes up until I select a message and then it crashes... I've submitted several crash reports already but not heard anything back as yet.

Thanks for replying. Only trouble is that the machines I'm having problems with already run the most up to date versions. In fact, by pure fluke, my wife's laptop which has automatic updates switched off is running FF 8.0.1 and this is the only way I can consistently access Gmail without crashing.
It runs XP if this information is useful.

All Firefox tabs and windows lock up when a single tab can't download a file (video, pdf, etc.)

If I am trying to load a webpage that contains a video, pdf file, or other large file, sometimes the webpage locks up, and then ALL other Firefox windows and tabs lock up as well (the entire program is frozen). This doesn't happen with IE or Chrome (in Internet Explorer, even though a tab may lock up from loading a large file, the other tabs and windows are still useable). Is there some kind of pluggin I can install to prevent this from happening?

Hi - yes I can! I hadn't noticed that little arrow before, thanks.
However I would really like to stop it hiding the first tab all the time.... Even when I navigate to the first tab using that "list all tabs" arrow, it still remains 'hidden' (i.e. I can't see a tab up the top, even when that tab is active. And when I navigate away from it to another tab, it is invisible again).
Any ideas?
Thanks

V 3.6.13 causes problems with closing "home" tab, and crashing.

I installed v3.6.13 recently, and noted a problem in closing tabs.
* The "home" or default 1st tab of the browser opens correctly and will correctly browse to other sites.
* I can open and close other tabs, however I can not close that 1st or default tab.
* When I have multiple tabs open, I have tried to close that tab with the |X| close tab button, with the left-click and close tab menu command, and using the wheel/center click button. None of these will close that window.
* When I have multiple tabs open, and close all but one other tab, both of these tabs still navigate properly. BUT if I close that next-to-the-last tab, the problem closes or crashes.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Problems with photoshop elements 10 and windows 8

I bought photoshop elements 10 for my wife last year for Christmas. She decided not to install it on our old computer because we knew that we were planning to replace the computer this year. We finally got around to replacing it and the new computer came with Windows 8. She installed her photoshop on it and she is having problems with it. I'm wondering if there is a compatability problem with the windows 8? Is there an update for the pse 10 that will make it work with windows 8?

PSE10 is said to be compactable with windows8. What kind of problem are you facing? Did you try launching after resetting preferences? to know more about reseting preferences, check http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Problem with new-line-character and java.io.LineNumberReader under AIX

Hi folks,
I got the following problem: I wrote a little parser that reads in a plain-text, tabulator-separated, line-formatted logfile (and later on safes the data to a 2-dimensional Vector). This logfile was originally generated by an AIX ksh script, however, I copied it on my Windows machine to work with it (for I'm using a Java editor that runs under Win Systems).
For any reason, Windows, and what is worse Java too, seems not to recognize correctly the new-line character (in the API it is written that this should be a newline '\n' or a carriage-return '\r' or one followed by the other) that marks the end of a line in the logfile.
Also, when I'm opening the logfile with the "Notepad"-editor, this special character does not seem to be recognized, every line is inserted right after the other.
On the other side, when I open the logfile with the built-in editor in the CMD-Shell ("Dos-shell"), the newline chars seem to be recognized correctly.
But when start my parser on the AIX-machine the newline does not seem to be recognized correctly again.
I tried to read in the logfile with MS-Excel and safe it as a plain-text, tabulator-separated, line-formatted logfile again, with such files my parser works fine both on the AIX as it does on Windows.
Any ideas? Anybody got over the same problem already?
Greetz FK

Under windows, text files' lines are usually delimited by \r\n,
under Unix/Linux/AIX etc. \n
and under Mac \r.
I recommend to use the following editors, which are capable to handle files with Unix and Windows-styled line-delimiters or convert between these types:
Programmer's File Editor (PFE; available on Windows)
The Nirvana Editor (http://www.nedit.org/; available on Unix, MAcOS, Windows)
(BTW good old vim can handle that too. Transferring text files to windows in order to edit them, even using Excel for this purpose means your being a UNIX newbie, (I mean no offense by writing this) so vim is probably beyond your reach for the moment.)
Java normally assumes the platform's line delimiters where it is running, so if you transferred the file from Unix to Windows might be distrurbing.

Pairing problem with Docs to Go and Windows 7

First, I'm not sure this is the correct forum. I've setup a new Windows 7 laptop and installed Docuemnts to Go (latest version downloaded, no updates needed). An was able to pair with both my iPhone and my iPad. iTunes syncs fine (but that's using a USB cable). I entered folders and files for Docs to Go to sync (the same ones as on my old laptop running Windows XP). Then Docs to Go desktop couldn't find the iPhone and I needed to pair again. I have reinstalled the desktop application, double checked Bonjour, both laptop and iPhone are on the same WiFi. But, I can't pair the two devices to sync my folders and files. Dataviz hasn't been any help - followed all their instructions, e-mailed Tech Support and got a reply that said to do exactly what I told them I did!
Anyone have this problem? Anyone have a solution?
It seems to be a problem with one or the other (desktop application or iPhone app) not communicating via WiFi properly. I'm assuming that that's a Bonjour issue.
nlc

Try disabling your security system's firewall (McAffee, Norton or the like). You can also try this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problems with Nvidia 320.49 and Windows 8.1

I am having problems with my HP Envy with windows 8.1... Nvidia driver keeps crashing.
Took the unit to Best Buy and we determined it was with the 320.49 driver - we are
able to reinstall it, and it will usually last for a few hours before it fails again. When
it fails, the resolution reverts to 1024 x XX... not the 1920 x 1260 when it works
right... very frustrating, but I need to know if the card needs replacement, or if there
is a fix from Nvidia... Contacted Nvidia and did not get anywhere with them.... can anyone
help??

Thank you for the additional information.
If it is an HP OEM video card, this is the reason that it is not working with the retail nVidia driver. HP has their motherboards and video cards made to their specs. Only the drivers developed by them will work with their cards.
Here are the drivers available for Win 8.1 on the Software & driver download page.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problems with Nvidia GeForce 210 and windows 8.1

Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
given several blue screen).
I tried to update the drivers for the card but I got the same problem. It was working properly with generic
drivers, and if I went to Computer Administrator me a yellow triangle appeared
on my graphics card and the properties told me the following:
Windows has stopped this device because it has reported problems.
(Code 43 )
My machine is as follows:
Mainboard : Asus P5K SE
Chipset: Intel P31/P35
Processor : Intel Core 2 Quad Q6600 @ 2400MHz
Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : Seagate ST3320620AS ATA Device (320GB )
Monitor Type: LG Electronics L1919S
I just formatted
the computer from scratch, and
I still had the same problem with the graphics card,
so I imagined it would be a hardware problem
and bought NVIDIA GeForce 210.
In the end I
upgraded to Windows 8.1 update 1 with
the latest drivers for the GeForce 210,
and after 6 days running everything correctly, a few days ago
returned to give me problems,
the screen sometimes freezes and will not
let me do anything and after a while
giving me a blue screen and reboots
me, I suspect that the graphics drivers
are giving me problems, and I had to
disable the graphics card and work with
generic drivers from Microsoft, and even then I
was restarted once.
I installed Driver Booster and all the drivers are updated.
Could
anyone analyze
dump files dmp ? Download here
I got another dmp:
C:\Windows\MEMORY.DMP but it is too heavy.
Thanks

yes, I check the dump files
this cause by graphic card, on which graphic card you reformat your PC and update
.NET framework maybe cause this driver corrupted
my suggestion is try using internal graphic card, just for testing
Just in case you don't believe me, please check this dump file
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
SYMBOL_NAME: nvlddmkm+9bbe2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
Followup: MachineOwner
1: kd> lmvm nvlddmkm
start end module name
fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Problems with new PalmDesktop6.2 and Palm TX

I have a Palm TX that I have been using and syncing OK for over a year. I recently installed the PalmDesktop version 6.2 and it seemed to work well. For Christmas, I received an external disk drive and I moved all of the folders and documents from my My Documents folder on my C: drive to the new external K: drive. I copied the Palm OS Desktop folder to the new K: drive and also kept a copy back in the My Documents folder on the C: drive. Since I have done that, I cannot run the new desktop software. I get the following message when the desktop software tries to start: "Runtime Error! Program: C:\Program Files\Palm\Palm.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. "
I have read some other posts on doing a clean uninstall for XP but I no longer have the CD that came with the TX that has the original desktop software. If that is available on the web, I am prepared to do that clean uninstall and re-install.
Any help would be appreciated. Thank you.
jackmc92
Post relates to: Palm TX

I did the complete removal and reinstall, deleted the registry entries and rebooted; I then reloaded Pald Desktop, did a hotsync which appeared to go OK. When I tried to open the Palm Deskto, I got the same runtime error message I first reported.
The hotsync log says:
HotSync session completed with errors on 01/04/09 09:09:36
HotSync session started on 01/04/09 09:08:25, and completed in 71.0 seconds
Date Book synchronization aborted
Duration: 0.0 seconds
Address Book synchronization aborted
Duration: 0.0 seconds
To Do List synchronized successfully
Duration: 0.2 seconds
Memo Pad synchronized successfully
Duration: 0.5 seconds
Documents To Go synchronization completed with messages
Duration: 24.0 seconds
Documents To Go Message(s)
- Getting Started Tips -_1
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Getting Started Tips -
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Sample - Baby Picture
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Sample - Closing The Deal_1
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Sample - Golf Scorecard
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
WWW MEETING FORMAT 2
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Willingness Group_Alpha
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Willingness Group_Alpha_eml
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Willingness Group_Month
- Source file cannot be found
The item has not been updated on the handheld.
Run Documents To Go on the desktop and update the item view to resolve this problem.
Backed up some files successfully to Jack McIntyre's Backup folder
Can you provide any clue as to why it didn't work?
Many thanks,
jackmc92
Post relates to: Palm TX
Post relates to: Palm TX

Camera Raw problem with new Nidon D90 and CS2

Please forgive me if this is a repeated question . . . but I need some advice . . . I just picked up a new Nikon D90 tonite . . . I'm using Mac 10.4.11 and Photoshop CS2 . . . when I tried to open my raw files in Bridge, I get the message that these files cannot be recogniized . . .After searching Adobe support I just have more of a headache . . .I primarily shoot Raw . . . and have never had a problem with CS2 and Bridge with my Nikon D80 . . . Please give me some advice . . .Thanks so much in advance . . .David

Of course you get an error! The D90 didn't come out until way after Adobe stopped upgrading ACR for Photoshop CS2. You will never have support for your NEF files with Photoshop CS2. If you don't want to use the DNG converter you have several choices. Upgrade to Photoshop CS4 or Lightroom 2.x, purchase Photoshop Elements (latest version, although Camera Raw doesn't have all its features in Photoshop Elements), purchase some other software that will support your NEF files. The only way you can have the support for your NEF files in Photoshop CS2 is to use the DNG converter.
A lot of people complain that it is an "extra step" to use the DNG converter. You have to download the images from your camera anyway. Just use the DNG converter to do that. It will take a little longer than a normal download, but once the download/conversion is completed your workflow is no different than it otherwise would be.
Camera Raw has matured greatly since Photoshop CS2. You purchased an outstanding camera. It's now time to upgrade your software. ACR is little more than a toy in Photoshop CS2.

Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Problems with IS-H*Med and "Windows Vista"

Hi all:
I'm having problems with automatic installation of IS-H*Med using a computer with Windows Vista. It doesn't start. I must to install it manually, and when the user request the OCX, it hangs up.
Any idea?
Thanks in advance and regards,
Alejandro Gómez.
P.D.: Excuse my bad English.

Hola Alejandro,
could you please elaborate on your problem a little bit in detail?
I suppose, you don't mean the SAP system itself, since as far as I know, it (the application server side) is not supporting Windows Vista at all.
According to this <a href="https://service.sap.com/sap/support/notes/66971">SAP note 66971</a> only SAPGUI 7.10 supports Windows Vista. Do you use this version of SAPGUI?
What does not start? SAPGUI? The planning grid?(Which is the only i.s.h.med specific OCX as far as I know).
Did you open a customer support message for this?
kind regards,
anton wenzelhuemer

Problems with new alum keyboard and orig acrylic keyboard on eMac

Hi ,
I need help , pls.
I just got an alum keyboard to use w/ my eMac.
I've upgraded software as instructed.
My numbers pad do not work.
ALso using a logitech wireless/laser opt. mouse. I had to download logitech's software ( never had to do this before ).
Being that I'm so used to the numb pad and wireless, I can't do any type of work w/o accidentally using the numbers pad.
In doing so, it freezes up. At one point I had all hardwired to the eMac ( new & old keyboard and mice ). The wireless mouse would have to be reinstalled after the machine would go to sleep and when I'd log out as a user.
I've tried to use systm. pref. and used "set keyboard to default". Using the flag (US and NOT extended ).
It's been a pain for the last few days. I went back and am now using my orig. acrylic /plastic keyboard that came w/ my eMac. Now this keyboard's num pad is not functioning anymore either.
Now..what I've done so far....
I've deleted the "dmg " file from the updated alum keyboard, and trashed all logitech's software.
I even ran applejack ( yes, I'm desperate so I did it.) I have a big workload ahead of me.
My old keyboard and logitech mouse is working except for the numbers pad.
What must I do ? Or what else can I do ?
I've called support and all the say is take the new keyboard to the store.
No one at apple support or has helped. "May be a batch of unsuitable keyboards".
I understand the part where you must use some things for the keyboard w/ an alum. iMac.
But those things i.e iPod, hub are not being used via alum keyboard's 2 ports , so I know that's not an issue.
My mouse ( not a mighty mouse ) and the logitech and old keyboard are hard wired to the eMac (machine's usb ports ) itself.
I need some help pls. Can someone pls. respond here or let me know of any similar problems and solutions you've made.
Thanks in advance.

Whenever new software is installed it is wise to run Disk Utility and to Repair Permissions. If you haven't done this try it and see whether there's any difference.
If you haven't tried yet plug the keyboard into a different usb port. If it works there it's possible that the other usb port is faulty.
My guess is that there's a software problem. So...
Try downloading the 10.4.11 combo update and installing this. You can do this 'over the top' of what's already there. Many users have found this resolves system software issues. You may need to re-apply other software updates released after this one. You can check Software Update to see which updates are necessary if any.
Neville

Problem with new firefox tabs and window focus

Similar Messages

Maybe you are looking for