Problem with new iPod software update and Robi DAB radio

There seems to be a compatability issue between my iPod Classic and my Robi DAB radio attachment. The DAB radio was working just fine until last week, when I downloaded the latest iPod software updates. Since then, the Robi works fine when it is used as a remote control for the iPod, but when it is used in radio mode, the iPod shuts down after a few minutes (as though it does not recognise that the radio is still attached, and thinks that there is no activity) and the Robi closes down too (due to lack of battery power when the iPod is no longer on). It could be a coincidence, but my guess is that the iPod updates are causing a problem.
I have tried to remove the new software updates from the iPod, ie I deleted the latest updates from the iPod software updates file (C/Documents and Settings/user name/Application data/Apple Computer/iTunes/iPod Software updates), unchecked the box labelled "automatically check for software updates", and then tried to restore the iPod using the old software. At that point, a message from iTunes appeared, to the effect that it could not go any further due to no internet connection. I could not find any way of restoring the iPod without letting iTunes download the current sortware updates.
So the question is, does anyone else have a similar compatability problem (with the Robi or anything else) and how can I get the iPod to run on the previous software?
I would be very grateful for any advice, as this is a very frustrating problem.
Sue
Message was edited by: Sue Marsh1

The good news is that I removed the most recent iPod software update, restored the iPod (ie returned it to factory settings and reloaded all 14500 songs) and now I am really pleased to say that the iPod and the Robi are working together again in harmony, which is a huge relief.
Since I had inadvertently deleted the previous version of the iPod software from my PC, I had to download the files from here;
http://rapidshare.com/files/73863240/1.0.3.zip.html
I have contacted Roberts Radio about this problem. The recent 1.1 software update must be even more frustrating for them, since they have sold lots of Robi radios.
If anyone needs help to revert to the previous iPod software, have a look at this thread, where the instructions are printed in red;
http://discussions.apple.com/thread.jspa?threadID=1343689
Message was edited by: Sue Marsh1

Similar Messages

  • Please Help - Multiple problems with new BB software update

    Hi -
    Re: new software upgrade to 6.0 bundle 2534 v6.0.0.570
    I have a BB Bold 9700, via Carphone Warehouse on O2 (UK).
    I just downloaded this software update in good faith, via the desktop manager. It has changed several things I did not wish to change, some of them without any explanation as to how to revert to what I had before.
    One thing it has done is duplicate all my calendar entries, using different email addresses as default calendar addresses. I never had this with the previous software. Also, I am having trouble entering a new calendar entry on a day where there is already an "all day" entry.
    I guess the more we rely on these little machines, the more we suffer when things go wrong. Does anyone have any clues as to what to do ? Carphone Warehouse could not help and accessing anyone at BB seems impossible.
    Thanks in advance for your help.

    To reply to your responses, in order:
    Nothing -- I just discovered the problems and came here to....
    ... Express my frustrations (aka "throw a tantrum") and seek feedback from others who may be experiencing the same issues;
    Yes, I checked the wifi settings and nothing has visibly changed, and no, I haven't received ANY prompts from Apple about app upgrades -- and before you ask, yes, my iPad is registered with Apple with me as the owner;
    The decision to cut the power was one of the moronic moves that bother me, as it renders the device useless for the growing number of photographers looking to give Apple their MONEY to use it; and
    I should not have to reset the network settings just because Apple can't get the bugs out of an update before they issue it.

  • Will the new ipod software update erase all of the music off my ipod??

    will the new ipod software update erase all of the music off my ipod??

    Unless you plan to restore it, if all you are doing is updating the firmware then nothing will be erased from your iPod. Even if it was you just have to reload from iTunes or your back up.

  • Many Problems with new iPod

    It all started out when I got my nice shiny new iPod. I installed the latest 64 bit version of iTunes and connected my new iPod. First thing iTunes told me was that the iPod was corrupt and needed to be restored. I thought no big deal. The iPod is new with nothing on it so I had nothing to lose. The iPod was stuck in restore mode for about 8 hours and I gave up. I rebooted the computer and reconnected the iPod. Now iTunes could not see the iPod.
    You may need to know that this computer is a newer Dell Studio XPS running the 64 bit version of Windows 7 Home Premium.
    I followed all of the recommended solutions on the page for Windows not seeing an iPod. When it came to reinstall iTunes is when the real challenge started. Lots of problems with not being authorized to write some registry keys and iTunes would roll back the installation. Each time I installed iTunes I installed as Administrator. I had to jump through all of the hoops of deleting these registry keys what would not delete. I installed several times, each time deleting a new registry key that the installer would not overwrite. After 2 days I finally got iTunes reinstalled.
    However iTunes would still not see the new iPod. Messed around with this for another few hours.
    I have an old computer that I seldom use. This is an older Dell Dimension running Windows XP Professional Service Pack 3. It had an old version of iTunes. I thought I would try getting the iPod to work on this computer. This would at least tell me if there was a problem with the iPod itself. I updated the iTunes to the latest version. Connected the iPod. It was seen but said the iPod was corrupt. Did a restore and all appeared to work fine. So this tells me the problem is not with the iPod, but with iTunes on the other computer.
    I went to my other computer, the one that I want to use iTunes on, and reconnected the iPod. It was seen this time but iTunes said that the iPod was corrupt and needs to be restored. I started the restore process. It has been restoring for over 10 hours now.
    I really don't want to start over with all of the problems I had reinstalling iTunes.
    Anyone have some suggestions on what to try next?

    Made some progress during my lunch break. I started suspecting a problem with the USB driver for this iPod. I found KB article 1538 which was helpful.
    I went to the device manager and deleted anything that looked like an Apple device and deleted all USB mass storage devices. I also deleted the device drivers for these items at the same time. I then scanned for hardware changes and the iPod was found.
    The iPod is now seen in Windows Explorer. It still has the name I gave it when it was connected to my other PC. So I suspect the restore that was taking over 10 hours never had a chance to start. From Windows Explorer I was able to access some folders on the iPod.
    iTunes would still not see this iPod. However I hope a reboot will solve this.
    Ran out of time and needed to go back to work. I will update how this worked.

  • Distortion problems with new iPod Classic

    Hello:
    I recently purchased a 160GB iPod Classic to replace a 2-year-old 60GB iPod. I had no problems updating the new one; about a zillion tracks went in very smoothly in about a half-hour. But I have noticed a couple of problems:
    First, I always listen to my iPod at work on a Klipsch dock, and even though I keep it set at a fairly low volume (all of the content is classical music), I'm getting crackling and distortion in random spots in music. It doesn't seem to matter if the music was downloaded from iTunes or imported from a CD. It's definitely not the dock, because I tried the old iPod on it and it worked as well as it always did.
    Second, when I select a playlist and start playback, I notice that more often than not, the first second or two of music is cut off. I have to press the back arrow on the iPod, and then playback is correct.
    That is a minor annoyance, but the the distortion problem is far more serious. I never had either problem on the old iPod, and I was wondering if anyone has experienced similar problems with the iPod Classic. I'd HATE to think I'd have to trash 40GB of music and start all over importing CDs.
    Thanks for any input you can give me.

    thanks for the suggestion but it did not work.
    The iPod came up asking for the password (WEP key) and i entered it. It showed connected with the router but Safari does not work and when i check the DHCP entries in see the following
    IP: 169.254.202.45
    Sub: 255.255.0.0
    This means that the connection was made but the router DHCP server did not assign an IP address to the iPod.
    This exact problem i have encoutered so far in my office, a cofeeshop and a car dealership. In all cases the wirelles was based on an older linksys router and except in the case of my office the other two were unsecured networks.
    I believe it has something to do with the firmware on those linksys routers causing a problem specificaly to iPods and i would guess iPhones too since they have the same OS.
    I'm open to any suggestions but i've tried all the ones posted in this and other forums so far with no luck.
    When i assign a static IP, the iPod again connects, the router log indicates outgoing traffic from that IP but there is no incomming traffic.
    John

  • Problem with new Adobe 9 update

    I updated my Adobe 9 today and now Safari is having problems loading, downloading, and printing documents. However, if I rightclick the PDF link and choose "Download Linked File," the document downloads fine. Any ideas about fixing the problem? Thanks.

    This is NOT a solution, but it is the cause of the problem.  You have to disable "Allow fast web view."  To do so, open Adobe Reader and click Edit -> Preferences -> Internet and then uncheck "Allow fast web view."  I had to do this on both Adobe Reader and Adobe Acrobat Pro.  What that means is the PDF won't display until it's done downloading.  However, I've been fighting this problem all day thinking it was a problem with one of our PDFs, and no, it's a problem with Chrome/Safari (Apple Web Kit) and Reader. 
    Software versions are below.  I hope it helps!
    Chrome 5.0.375.99
    Adobe Reader 9.3.3
    Adobe Acrobat Pro 9.3.3
    Windows XP SP 3

  • Backlight problem with new january software

    after taking forever to get the new january sofware into the Ipod touch now the backlight
    just doesn't turn on, it was working fine before the update but know it doesn't work. I have try restoring it, reseting it and nothing, does anybody knows hot to fix this????.
    Thanks

    Your download may be corrupted.
    Go to the appropriate location below and move them to the trash - don't delete them yet.
    Now, re-download the software and see if that fixes it - you may have to restore again, but it's worth a shot.
    The ".ipsw" files are what iTunes uses to restore your iPod or iPhone. If those files are unusable (corrupted), then try deleting them so iTunes can download a new copy of them.
    You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone: ~/Library/iTunes/iPhone Software Updates
    iPod touch: ~/Library/iTunes/iPod Software Updates
    (The tilde "~" represents your home directory.)
    Windows XP
    iPhone: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
    iPod touch: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
    (If you don't see the Application Data folder, you may need to show hidden files.)
    Windows Vista
    iPhone: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    iPod touch: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
    (If you don't see the AppData folder, you may need to show hidden files.)

  • Problems with new iPOD shuffle

    Just got a new iPOD shuffle, and can't get it to work. i followed all the troubleshooting directions (worked on it for about 2 hours, twice)with the same problems. Updated the software version, restored the settings, no help. I copied all my CD with no problem, and the PC plays them perfectly in iTunes. Have the follwing errors. I think this is just a bad unit:
    1. "Cannot read or write to disk"
    2. "Unit could not be restored. Unknown error occurred" (1418).
    3. "Unit could not be restored. Unknown error occurred".
    (-50)
    Any ideas??

    Just got a new iPOD shuffle, and can't get it to
    work. i followed all the troubleshooting directions
    (worked on it for about 2 hours, twice)with the same
    problems. Updated the software version, restored the
    settings, no help. I copied all my CD with no
    problem, and the PC plays them perfectly in iTunes.
    Have the follwing errors. I think this is just a bad
    unit:
    1. "Cannot read or write to disk"
    2. "Unit could not be restored. Unknown error
    occurred" (1418).
    3. "Unit could not be restored. Unknown error
    occurred".
    (-50)
    Any ideas??
    Try to restore it with Apple's restore software:
    http://docs.info.apple.com/article.html?artnum=305204
    They recommend using this if itunes cannot restore the ipod.
    Another ideas I ran across when solving an error (Windows cannot load installer for volume. Contact your hardware vendor) I was getting, in case the above didn't work:
    When you plug the device in have my computer open. When you see the device (F:?) right click on it and do a quick format. That apparently cleared up a lot of user's problems.
    If itunes opens before you do this it won't work or will disappear from my computer.
    If this doesn't work, did you get any error warnings when you plugged it in that could be causing it?

  • Two main problems with new iPod Touch

    I received my new iPod Touch 32Gb last week and I've been trying and testing for some days. It's really a nice device, but I've found two big problems with it...
    1.- WiFi connections are extremely unreliable. On my home router it connects and gets the right IP from DHCP but then it gets stuck and can't transfer data. Safari seems to work sometimes, YouTube and maps are almost impossible to use, and other apps works only sometimes.
    I've tryed also on my office WiFi network and it's a little better. But when connection is not used for a minute it gets stucked againg. Then I need to go to settings, switch WiFi off and on again, then works again for some time.
    I've spend days searching on the Internet for a solution and I've found that lots of people has the same problem. It seems iPods have serious problems connecting to some routers and blame the router about this.
    My opinion is that the problem is with the iPod. My router works flawlessly with my two laptop computers, my desktop computer, my PSP, and my HTC PDA. No problems at all. So, where's the problem?
    2.- There's a big problem on iTunes with sync settings. I've noticed that users can select to to transfer the data manually or synch. Then on each tab for media you have individual options. For example I can choose to sync music and photos, but not sync videos and Podcasts.
    The problem is that this don't work at all. I've selected to sync music but not videos but when sync all my videos had been deleted from my iPod.
    I don't see the point on placing independent sync option on iTunes if they don't work at all.

    Sounds like a faulty battery to me. Might need to contact Apple about that.
    As far as the volume, I'm pretty sure, as I just responded to another post, the problem is the software. Any ios version 4.0 and higher, the volume is lower than iPod Touch/iPhones with 3.1.3 and lower. My volume has been lower ever since I upgraded to 4.0 and 4.2, and I've found a lot of other people online complaining about the same thing. I've seen a couple posts where some have said Apple lowered the volume on purpose. I think we just need to complain to them and hope they release an updated ios with the volume raised back to where it was.

  • Problem with new IPod Touch - connecting to computer

    Just bought an IPod touch 2nd generation and plugged it into my computer to charge and to set up. I got a "found new hardware-Ipod" message and then the "found new hardware wizard" screen came up asking me for an installation CD or floppy to install software. I already have iTunes installed (the newest version) as have used it before with an Ipod nano. I have tried plugging the ipod into different USB ports on the computer but no avail.
    Could anyone help me with this problem as am desperate to use my new Touch?
    Thanks

    All was well with my 2nd Generation Itouch until I downloaded Itunes 8.2. then ol boy what problems I have had! As follows:
    1) Itunes cannot detect my device, therefore, no syncing is possible
    2) Cannot connect to the Itunes Store....error indicates I have problems with my network connection (error code 3221), although I am connected and I have not previously had a problem.
    I have searched for possible resolutions and have:
    (a) Uninstalled Itunes and reinstalled .... NO GOOD
    (b) Reset the network settings on the Itouch .... NO GOOD
    (c) Reset all settings ... NO GOOD
    (d) Ensured that the Apple mobile device option are okay
    etc etc. In fact, I have done everything possible that has been indicated on the various websites. I should confirm that my computer recognises my Itouch BEFORE I access Itunes.
    Please help.

  • Many problems with new iPod nano

    I had an iPod Mini for a year, and never had any problems with it. Last month, I bought a Nano (4 GB), and I've already had several problems. Has anyone else experienced these issues?
    1. When I jog with it (which is very often), it often skips.
    2. Several times the purchased music has stopped playing altogether. When I try to play purchased songs, they just skip directly to the next song. The problem is temporarily solved when I restore my Nano, but it then resurfaces within 2 or 3 days- and I have to restore it again. Bottom line, it's a recurrent issue.
    3. In the last 3 days, I can't turn off my Nano (it has nothing to do with the "hold" switch being out of place). It operates otherwise normally, but nothing happens when I hold down the "play/pause" button. I tried resetting it and restoring it, but the problem isn't solved.
    I can't seem to find any good references in the Troubleshooting tips Apple has posted.
    Thanks for any help that you may be able to give me on solving any of these 3 issues.

    Numbers 1 and 2 may be related. The iPod nano will not skip just because you are jogging (it does not have a harddrive).
    Is the software on your computer and iPod up to date?
    iTunes
    iPod Updater
    Update iPod's Software
    Also, try doing this, then restore your iPod, and then update it with iTunes again...
    How to recreate your iTunes Library
    Try the steps listed here too...
    iPod does not play content purchased from the iTunes Music Store
    btabz

  • Sync Problem with new iPod

    I am new to the iPod world, and just got my hands on an 80gig iPod video. I love it. I own a MacBook Pro 2.0, and I have iTunes 7. Now that I have told you this basic info, this is the problem I am having.
    The iPod sync's sucessfully when I first connect the iPod while in iTunes 7, but after the 1st sync, lets say I download some new songs, import some new songs, or whatever, and I go to sync the iPod, it just say's "Waiting on iPod", and eventually times out. Then I unplug the iPod, plug it back in, and it sync's up all the new stuff. I would rather have it just sync up without having to dissconnect and re-connect it, but it will not. Any suggestions?
    Zach

    I can't help you, but I'm having a similar problem, and hopefully someone can help us both!
    I bought a new 80 GB iPod and updated to iTunes 7 (from 6). The first time I connected, all the songs copied over automatically, which was fine.
    However, when I later tried to disable automatic sync - which is my personal preference, because I don't want all the songs in my library on my iPod - ALL the songs I had copied to my iPod were erased, and all the settings (backlight, click wheel, etc.) on my iPod were restored to the factory defaults!
    Furthermore, when I connected my iPod (before I turned off sync) for the second time, anytime I would click on "library," any playlist, the iPod eject button, or ANY button other than in the iPod menu, iTunes would crash immediately - and there would be no error message!
    Someone help us! (this is all on a G5 with 10.4.1 btw)

  • Pb with new Ipod software

    Since I downloaded the latest update of the Ipod software, It is not recognized by my computer anymore... The windows explorer & itunes can't find it.
    I tried to reinstall it with the Ipod updater but it fails everytime:
    either it says there is no ipod connected,
    or it says it is used by another application(!!)
    Does anybody know how I could repair that or return to the older ipod software version??
    Thanks!

    FOR WINDOWS:
    Connect ipod if tunes opens close it LEAVE IPOD HOOKED UP ! control alt delete in processes RIGHT CLICK AND END ipodservice.exe,then open start and click run and put this in "c:\PROGRAM FILES\iPOD\BIN\iPODSERVICE.EXE" /service
    Leaving the ipod HOOKED UP NOW REBOOT LEAVE IPOD HOOKED UP may take a few minuets be patient...when rebooting is done itunes should open and recognize your ipod ...This worked for my new 80gig ipod just purchased 2 days ago and pluged in ipod it formatted to windows ok but itunes would not update or recognize ...This info is from Jeremy in ohio tech support for apple he is good (seems to know what he is talking about ), first 2 tech's i talked to were useless . Now ipod is auto updated very happy auto dnloaded music to new ipod (6,787) songs and all is ok ...This is not a fix for scratchy audio this is making ipod able to read your ipod by shutting off ipod service then rebulding it (restarting ) and worked fine for me ...If not sure go ahead and call tech support on this fix for updating ....Thanks all Good luck..

  • Youtube slow with New iPod Touch update?

    It seems when i got the new iPod touch/ iPhone update the youtube seems to be slower than ever. It takes like 10 minutes to download a video. Anyone else having this problem or know how to solve it?

    The iPod's YouTube application streams video from YouTube and doesn't download it. Anyway, however you are doing it, the speed depends entirely on the quality of your WiFi connection. The 2.2.1 update only made some minor corrections and did not have anything to do with WiFi.

  • New Android Software Update and volume control

    I recently got the new Android System Software update.  The problem that I noticed right off the bat is that I can no longer turn the volume off.  Only to vibrate mode.  Has anyone else experienced this problem?

    I have provided some information below that may help with the silent vibrate function.
    If you are just using the volume keys on the side of the phone, you can only set it on vibrate (silent mode is not available through this method). If you would like to place the phone on silent, you will have to go through the settings and sound menu.
    I have provided the information below:
    Enabling silent mode
    <Select menu> <Select settings> <Select sound> <Check Silent mode> <Select Vibrate / Never>
    I hope this information helps!

Maybe you are looking for

  • Report Region SQL Source

    Hello all... Im new to Application Express so my problems are quite fundamental. I am trying to create a filter system on a report region that alters the SQL depending which field is selected and what criteria is entered. How do I refer to the SQL? I

  • Second hand ipad locked to unknown previous owner

    hi,i bought a second hand ipad 4,but it is locked with the previous unknown users id,is there anyway of resetting the ipad back to factory settings.many thanks

  • Netbeans 3.5\Code2000.tff\Character Display

    I'm currently working on a bilingual project. I am using Netbeans 3.5 to code it in, along with designing the gui. Some of the characters that I wish to display include those of indian native languages such as hindi. This is where the Code2000 font c

  • Third Party File Recovery

    I was currently working on a video project, using FCP with a few friends. When I woke up the next morning the project file was in the trash. I removed the project file from the trash and put it back on the computers HD and an external that I am using

  • How to reset All users and delete their table?

    Hi, i want to know How to reset All users and delete their tables with username- system and password-manager. thanks