Problem with Olympus Stylus 770 SW created AVI

When there is AVI video on the xD card, it is inserted in card reader, it would auto-launch iPhoto, but then nothing would show up in iPhoto... no little card icon... no option of downloading into iPhoto, nothing...
It DID show up in Finder, I was able to drag the AVI files to a folder on my hard drive and delete them from the card. Once that was done, if I eject the card from the reader and then re-mount it (with the AVI files deleted) it would launch/show up and download photos straight into iPhoto...
What's "wrong" with these AVI files that iPhoto doesn't like 'em? I know QT will play them.

This question was solved in another thread:
http://discussions.apple.com/thread.jspa?threadID=1140350&tstart=0

Similar Messages

Problems with Epson Stylus 3000 IP Ethernet

Problems with Epson Stylus 3000 IP Ethernet
The printer stops processing after reaching 1,72% of printing.
The Ethernet Cards led is on and blinking green.
I am running
Powerbook G4
OSX 10.4.5
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
I can se it as well in Safari under the ip adress 10.0.0.6
I have tried to test the printer in the Common Unix Printing System
I can see the printer there as well.
A test print here results in
"ipp" stopped unexpectedly with status 1
All my other printers work well and prints test sheets.
The printer has not worked since Tiger.

Can you please help me....
I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
Here's what I'm doing:
- I go into Printer Setup Utility
- I choose Add Printer
- I choose IP Printer
- I choose Line Printer Daemon - LPD
- I pop up the "Print using" and select the "EPSON".
- Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
- THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
Where did you find the:
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
Thank you for you help in advance!
Micdim
G4 Dual 1.42 gig Mac OS X (10.4.5) 1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

I am having problems with Olympus .orf files one files cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

i am having problems with Olympus .orf which cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

That camera model is too new for your programs. Every camera has its own raw format and ACR must be updated to include the info for each new model as it comes out. The workaround would be to download the free Adobe DNG converter and use that to convert your ORFs to DNGs that your version of Camera Raw can read.

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

Problem with import statement for user created classe

I recently downloaded J2sdk1.4.0_03 before that I had jdk1.3 and never had this problem.All the files other than named package I import for my
application does not compile.But when I commented that out it work just fine.
any help is appreciated

thanks
It makes sense not to import non-packaged class.
My other problem is with JDBC ODBC.I have a Dell system with Windows XP.
I registered my User Data Source to ODBC with MS Text driver(.txt , csv).When the code reaches at the .executeUpdate(CREAT TABLE CUSTOMERS)
it throws an exception
sQLException 3:java.sql.SQLException: [Microsoft][ODBC Text Driver] Cannot modify the design of table 'CUSTOMERS'. It is in a read-only database.
Do I really need to change the attribues or some thing else.
How can I chane the attributes of the database.Never had problem with windows 98.

Altitude with Olympus Stylus 1030

ok so i got a new Olympus Stylus 1030, one of those shock proof, waterproof jobs, and it also has a barometer in it so it records the altitude (roughly) in the info. My problem is that iPhoto doesn't import this critical piece of information (for me) into the info for each pic. There is a slot for altitude, called GPS Altitude, but i guess since this is not a gps derived altitude it doesn't recognize it. Is trick to make iPhoto import, or is there a separate app to import more detailed photo info onto the mac so it could later be imported into iPhoto?
Thanks a bunch
Mike

This question was solved in another thread:
http://discussions.apple.com/thread.jspa?threadID=1140350&tstart=0

Problem with Oracle Security Developer Tools creating signed SAML Assertion

Hi,
I'm trying to use OSDT to create a signed SAML assertion.
Basically, what I've done is to use the ST_Test.java sample and the SignXMLEnveloped.java sample together.
This is just a proof-of-concept, so what I did was use the code from ST_Test.java to create the unsigned assertion, take the byte array that results, and use it in a ByteArrayInputStream feeding into slightly modified SignXMLEnveloped.java code.
I was actually able to created a signed assertion, but the signature on the signed assertion does not validate.
I think that the reason it doesn't validate is because the original code in SignXMLEnveloped.java sets the URI in the reference to "", whereas the reference should be to something like "XXXXXX", which is the "AssertionID" attribute on the Assertion element.
However, if I modify the SignedXMLEnveloped code to do a setUri to "#XXXXXX", I get the following error:
Exception in thread "main" oracle.security.xmlsec.dsig.SigningException: Cannot find node with @Id="theassertion"
     at oracle.security.xmlsec.dsig.XSSignature.sign(Unknown Source)
     at SignXMLEnveloped.main(SignXMLEnveloped.java:116)
Caused by: oracle.security.xmlsec.dsig.ReferenceException: Cannot find node with @Id="theassertion"
     at oracle.security.xmlsec.dsig.ObjectReference.dereference(Unknown Source)
     at oracle.security.xmlsec.dsig.XSReference.getTBDData(Unknown Source)
     at oracle.security.xmlsec.dsig.XSReference.computeDigest(Unknown Source)About to sign the Assertion...
     at oracle.security.xmlsec.dsig.XSReference.computeDigest(Unknown Source)
     at oracle.security.xmlsec.dsig.ReferenceList.computeRefDigests(Unknown Source)
     ... 2 more
I think I know what the problem may be, but I'm not sure how to workaround it. I have written some apps to do digital signature verification before, and I know that there is a problem with SAML 1.1 called the "idness" problem, where the "AssertionID" attribute is not an "id" type attribute in the schema. I have a feeling that I'm running into the same problem here, with OSDT.
Has anyone been successful at doing something like this with OSDT? If so, how?
Thanks,
Jim

Hi,
I was able to past my original problem, and can now sign the assertion which has the AssertionID attribute. I had to set the SAML version to 1.1 using initialize().
Unfortunately, when I run the resulting signed assertion through a signature validation, it is failing to verify.
I'm not sure why, but it is failing when it tries to verify the hash/digest on the reference.
I am using a separate application that I wrote that uses Java6 and the security API that Java6 has, and with debugging enabled, I can see the dereferenced data that is being fed into the digester, and that looks correct, but the calculated digest doesn't match what my OSDT-based application generated.
Anyone have any idea about what the problem might be?
Thanks,
Jim

Having problems with my MSI 770 Card

It is underperforming really hard on LoL and sometimes WoW, Just need some help trouble shooting this problem.
Here is my specs: GTX 770 I believe it is the.. N770 TF 2GD5/OC
CPU: AMD FX-8350
PSU: 550 Watt Gold
SSD
I'm getting between 48-90 FPS on leagues... I have downloaded the NVidia Drivers.. and can not figure this problem out. Any help?

The specs are quite useless to be honest. Follow >>Posting Guide<< exactly.
And the problem with the FPS reported is? It doesn't look bad.

Problems with Sony NX3 AND Sony Z5 avi files

Very, very strange problem. I will try to give as much detail as possible so bear with me.
I currently edit with two different computers. One uses Premier 3 the other uses Premiere 6. I shoot with several different cameras, but for purposes of this discussion I will talk only about the Sony Z5 and the Sony NX3. I capture my footage on a CF card (Z5) or SD card (NX3)
All HD footage shoot with the Z5 and/or the NX 3 works fine on either system. However any SD footage that is over a certain length will not import into premiere 6 (if it's from the Z5) or the length of the footage will only be 2:37 (on footage from the NX3). However the SD footage from either camera will play perfectly on the system with Premiere 3.
Any ideas on what my problem with premiere 6 is?

I caputured footage from my ZU1 yesterday that encountered time code breaks. They should not have been there. My only thought is that the breaks occured when I shut the camera down and started recording later.
Maybe... I assumed it was user error... I was wondering if perhaps a setting in the camera was causing the breaks when the camera powers down.

Problems with Natural Account segment while creating new SOB

Hello everybody,
I am testing a new GL SOB implementation in our test Instance. Below are the steps I followed.
1)Created a new calender with 12 periods.
2)Enabled Curriencies.
3)Created a New AFF Structure with 4 segments.
5)Created Value sets for those 4 segments and.
6)Assigned Value sets to the Segments.
7)Created LOV for the Value sets for the segments.
8)Assigned Flexfield Qualifiers for the segments.
segment1-Balance, SEG2-Natural Account, SEG3-Cost Center Accout &SEG-4 NO qualifier.
9)Saved, Froze and Compiled the AFF Structure.
10)Navigated to SETUP, FINANCIALS, BOOKS & DEFINE to create a new SOB.
11)After entering all the details including Calender, COA, Currencies in the Closing Tab when entering the Account details for Retained Earnings, the AFF takes all the values for all the segments except for segment-2 which has been qualified as a Natural segment.
12) I repeated the process by creating a new COA and it wont take the segment values which has been qualified as Natural Account. It gives me an error saying that No Entries Found For List Of Values and I double checked the Value List and Values and they are there.
What am I doing wrong? I badly need some input here.
Thank you.

Hi
1. How many values you have defined in Natural Account Segment Values.
2. Could you please check while defining the Values there is check box called
enabled. Have to checked it. Normally it is checked by default.
Regards

Problem with a primary key when creating a new record in Forms

My table has a field - MDD_KEY - that is a primary key. It is updated from a sequence with a before-insert database trigger. I know this works properly as the primary key was accurately populated when I inserted 1433 records.
In Forms 6, I have a form based on that table. I have set the mdd_key as a hidden field because I assume it will be entered by the before-insert trigger. However, when I enter data into the table, and then try to save it, I get a FRM-40202: Field must be entered. - followed by - FRM-40222: Disabled item MDD_KEY failed validation.
If I set DATA Required to no, when I try to save I get an FRM-40600: Record has already been inserted - but no such record exists in the database. I know this record is unique and does NOT exist because I deliberately made it up.
In the property palatte, the attributes of the field are:
DATA Data Type Number
Required Yes
DATABASE Database Item Yes
Primary Key Yes
Query Only No
Query Allowed Yes
Query Length 0
Insert Allowed Yes
Update Allowed Yes
Update Only if Null No
Lock Record No
I assume that my problem is that with a new record, the form wants to see the MDD_KEY populated before it saves - but that isn't going to happen until the before insert trigger fires in the database. I assume I have to populate that field within forms, but how do I do that without messing up the database trigger/sequence? I will have to load more data directly into the database - so I need the database trigger in place.
I have not used primary keys before so I am more than a little bit confused about how and when it should be populated when a new record is created in Forms.
Any help would be appreciated as I cannot enter new data into my form (works well with existing data).
Thanks
Glenn

hi
if u have any problem using seq then try that statemetn ur block level in ur form
PRE-INSERT trigger
select nvl(max(nvl(srno,0)),0)+1 into :srno from tablename;
Rizwan

Problem with "describe requirement"-function by creating SC

Hi all,
I have a problem by creating a SC with the "describe requirement"-function. If I use this function a regular SC is created and a purchase order is also created with the stauts hold. I do not want to create a purchase order because if the shopper does not find the requested material in the catalog he/she should create a requistion which is sent to to responsible purchaser of the purchasing group. If anybody knows how the solve this problem please let me know.
BR,
Bernd

Hi Bernd,
Go to tcode SPRO>Supplier Relationship Management->Cross-Application Basic Settings>SAP Business Workflow-->Perform Task-Specific Customizing.
There Under SRM, go to the Specific Task and assgin agents based on the Roles so that only users with that role can get the Witem.
HTH.
BR,
Disha.
Pls reward points for helpful answers.

Problem with editable combo box and creating dynamic table values using js

Hai
I have used jquery.jec.js to make my dropdown list as editable... I need to create dynamic table values on the onChange event of dropdown using javascript.
Now am facing the problem in it...
I am getting duplicate rows in the table... think(assumption) this jquery.jec.js is calling the dropdown again creating duplicate values...
Please help me out.... Any help is appreciable... Thanks in advance

Thanks elOpalo, for your valuable response....
I have found the correct way of doing.
Before i had my code like this,
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>test</title>
<script type="text/javascript" src="js/jquery-latest.js"></script>
<script type="text/javascript" src="js/jquery.jec.js"></script>
<script type="text/javascript">
$(function(){
$('#list').jec();
function giveAlert(){
alert('hello');
</script>
</head>
<body>
<form>
Combo Box:
<select id="list" name="list" onChange="giveAlert();">
<option value="1">one</option>
<option value="2">two</option>
</select>
</form>
</body>
</html>
Now i have changed as the following,
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>test</title>
<script type="text/javascript" src="js/jquery-latest.js"></script>
<script type="text/javascript" src="js/jquery.jec.js"></script>
<script type="text/javascript">
$(function(){
$('select.combo').jec();
$('select.combo')
.change(function() {
alert($(this).val());
}).change();
</script>
</head>
<body>
<form>
<table>
<tr>
<td>Combo Box:</td>
<td><select class="combo"><option value="b">banana</option><option value="a">apple</option></select></td>
</tr>
</table>
</form>
</body>
</html>
The problem is with the function i have called on the onChange Event.. Now i have defined it inside the jquery function of dropdown to make it as editable...

Problem with Olympus Stylus 770 SW created AVI

Similar Messages

Maybe you are looking for