Problem with ORACLE database

Hi all,
I am facing some problem with ORACLE database while configuring one JDBC scenario in the receiver side. I have configured one JDBC scenario like FILE TO JDBC. As JDBC is at receiver side i have provided the input file with the following format ,
<root>
  <StatementName1>
     <dbTableName action="INSERT">
         <table>employee</table>
          <access>
                <flag>NO</flag> 
                <ID>567</ID>
         <NAME>134</NAME>
             </access>
     </dbTableName>
  </StatementName1>
</root>
But in the ORACLE database all my columns are in the uppercase.
So when i have tried to send this input file to process through JDBC receiver side then i have faced the below error :
FATAL ERROR: Column 'flag' does not exist in table 'employee'
Then I have tried to check with sender side processing of JDBC adapter. By using the SQL statements as
SELECT * FROM EMPLOYEE WHERE flag='NO'
UPDATE EMPLOYEE SET Flag='YES'  WHERE flag='NO'
Here it worked fine.
Now my question is,
If the same adapter is working when we are writing a query directly(sender side), then we must also allow case independence in the auto generated SQL part(receiver side).
The JDBC drivers for both SQL server and Oracle, supports the same java code, for accessing the DB, irrespective of the case of the column names.
Please clarify this doubt as soon as possible.
Thanks,
Soorya.

Hi Dharmaveer,
When I go with the following input file,
<root>
  <StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                <FLAG>NO</FLAG> 
                <ID>666</ID>
                <NAME>SSS</NAME>
             </access>
         </dbTableName>
  </StatementName1>
</root>
I will get the following query with succesfull processing.
INSERT INTO  EMPLOYEE (FLAG, ID, NAME) VALUES (NO, 666, SSS)
when i go with this input file,
<root>
  <StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                                <flag>NO</flag> 
                               <ID>777</ID>
                    <NAME>TTTT</NAME>
                    </access>
               </dbTableName>
  </StatementName1>
</root>
Then i am facing this problem,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'EMPLOYEE' (structure 'StatementName1'): java.sql.SQLException: FATAL ERROR: Column 'flag' does not exist in table 'EMPLOYEE'
Here I cant get any SQL statement as it is not successfull.
I have gone through your link but it also says to modify the column in the input file which is not possible for me. Can you please help me in this regard?
Thanks,
Soorya

Similar Messages

  • Problem with Oracle database Express Edition (Linux)

    I installed oracle-xe on my machine (ArchLinux x64), and all worked fine before a  reboot. After it, I still can connnect to the db with sqlplus, but can't connect to apex (http://localhost:8080/apex/f?p=4950) and can't get a connection using ojdbc:
    Exception in thread "main" java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection.
    I tried to reinstall the db several times, but the result was always the same: all is ok only before rebooting. I'm a newer with Oracle database and can't find a solution. Could you give me some tip about it?

    The problem was solved by changing permissions for log directory :
    sudo chmod -R 777 /usr/lib/oracle/product/11.2.0/xe/log

  • Access vba problem with ORACLE database via ODBC

    I get a problem when using MS-Access 2007 DAO recordset built on table hosted by an Oracle database 10g and connected thru an ODBC link (the id is generated by a sequence/trigger associated to the table).
    The code I use is :
    Private Sub Commande0_Click()
    Dim rs As DAO.Recordset2
    Dim bm As Variant
    'Set rs = CurrentDb.OpenRecordset("select * from table1", dbOpenDynaset, dbSeeChanges, dbPessimistic)
    Me.Recordset.AddNew
    Me.Recordset!libelle = CStr(Rnd)
    Me.Recordset!code = “”
    Me.Recordset!actif = True
    Me.Recordset!idCollege = 1
    Me.Recordset.Update
    Me.Recordset.MoveFirst
    Me.Recordset.Bookmark = Me.Recordset.LastModified
    Dim idtemp As Long
    idtemp = Me.Recordset.idPartenaire
    Me.Requery
    Me.Recordset.FindFirst "idPartenaire = " & idtemp
    Set rs = Nothing
    End Sub
    When I run this code, I get an error 3167 (current record is deleted) on the line :
    idtemp = Me.Recordset.idPartenaire
    If I change the ligne :
    Me.Recordset!code = “”
    By :
    Me.Recordset!code = “xxxx”
    Or if I comment this line, the error does not appear and I get the right value in idtemp variable.
    I tried also with the same table in a SQL Server database table. In this case it works fine in all cases.
    So, I seems that the problem is due to the Oracle ODBC driver.
    I search on Internet but I have not found any explanation or solution.
    Does anybody experiment the same problem (and find a solution)?
    Gilles Roussel.

    There is a dediacted forum for Oracle ODBC driver issues.
    Please post your problem at:
    http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84

  • Problems with Oracle Database 10g Express Edition and JBoss

    Hi all,
    I try to use Oracle Database 10g Express Edition and JBoss, but sometimes i have a connection problems.
    Sometimes i have starnge warning:
    WARN [JBossManagedConnectionPool] Unable to fill pool
    org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    and:
    org.jboss.util.NestedSQLException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    Oracle Database 10g Express Edition support Distributed Transaction Processing (DTP) XA interface or not?
    Some ideas?
    Thanks in advance!
    Stoyan

    Hi,
    yes, it will work, but only with the Western European Edition, not the Unicode release.
    See this thread for details:
    Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
    Regards,
    ~Dietmar.

  • Connect Problems with Oracle Database Express Edition 11g Release 2

    Hello,
    I am a student trying to install Oracle Database Express Edition 11g Release 2 and SQL Developer on my home system, Win7 64Bit, in order to practice some things I've learned from me DBA class and Developer classes.
    Anyway, I have everything installed, but I am having difficulty connecting as SYS or SYSDBA in the 'Run SQL Command Line', I keep getting the ORA-01017: invalid username/password: logon denied.
    However, If i select the 'Start Database' I get this:
    C:\oraclexe\app\oracle\product\11.2.0\server\bin>
    and I can type sqlplus / as sysdba and it starts up just fine and show user lists me as "SYS".
    but if I go back to 'Run SQL Command Line' I still cannot connect as SYS or SYSDBA...I find this both confusing and frustrating. I don't know if I am in different instances or something like that, but I seem to be limited to connecting only as "SYSTEM". I need SYS because I want to practice creating datafiles, instances and things like that, but I seem to be lost.
    Also, I am trying to create a new DB connection with SQL Developer and I can only us SYSTEM for my login which, if I understand correctly, will limit my privileges. Again When I try to sign in with SYS or SYSDBA I get error'd out. When I installed Ora11gDBExpress I was prompted in input a single password that was supposed to grant me access as SYS or SYSTEM, but I am limited to only SYSTEM for some reason.
    So, I am looking for help/guidance as to what to do.
    Thanks in advance for any and all help,
    Warren

    General rule of thumb, don't use sysdba unless you want to shut down the database, or grant a database user privileges on a sys object.
    A SYSTEM connection is not "limiting", it has the DBA role which means a user with a system connection can do most anything needed, including select/update/delete/drop any user's objects as well as change parameters in the instance.
    The system user can indeed add datafiles, tablespaces, etc. The instance and database should already be created as long as the installer completed all its chores correctly. For XE, per the license agreement only one instance can run on one host. If you want to try creating a database, it will require shutting down the XE instance and creating a new database service, creating the database, and installing the system catalog and any other optional components desired. Good practice indeed, but a bit advanced for the new user.
    Do create users for schemas ... connect system; create user <username> identified by <password> and connect <username> for the schemas (a collection of objects) within the database. Grant the resource and create session privilege to <username> to allow the database user the ability to create tables, indexes, stored procedures, etc.
    There is no "or" in a sys as sysdba connection, from 10g onwards a sys connection requires using the sysdba privilege. To enable a sysdba connection, add your host user to the ORA_DBA group on the host. To verify the OS users in the ORA_DBA group, this might work for win7, in a cmd box ...
    $ net localgroup ora_dba
    ...If your OS user is in the ora_dba group the sys as sysdba password is not relevant, you can in fact type anything for a password. If you wish to connect with the sysdba privilege from a remote client, that is a bit different and requires knowing the password set in the instance password file. Which should be set the same as the system password defined in the installer, but you can change that by creating a new password file. Another slightly advanced topic.
    In Windows IMHO its better to leave the listener and database set to Manual start (in the services applet, Start/Run/services.msc) and start the listener, then the database, when its needed. At least for an XE instance, as its intended for practice and learning RDBMS management.
    Edited by: clcarter on Mar 2, 2012 6:19 PM
    fix typos

  • ASP application has problems working with oracle database 8.1.7

    ASP application has problems working with oracle database 8.1.7 through both oracle ODBC driver and Microsoft ODBC driver
    We have an ASP application running on Windows 2000 server, and with 8.1.7 Net8Client and MDAC 2.6 SP1.
    The application worked fine with an Oracle 8.0.5 database.
    After upgrading oracle database to 8.1.7.0.0, our ASP application works fine except when updating the same data record more than once. The application is not saving our updates.
    We tested our application using Oracles ODBC driver v8.1.7.5.0
    and experienced more problems. We had problems just bring up our data entry pages. In either case, we are returned with some 505 errors in our browser, problems with the ASP pages and IIS, the page is not displaying.
    If anyone has some suggestions on how to fix my problem, please advise. Thanks in advance.

    thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

  • A lot of problems with Oracle BI SEE 11g

    I have a lot of problems with Oracle BI SEE 11g
    1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
    2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
    For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
    Opening Logs by EM control doesn't work too.
    in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
    <Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[[email protected][app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
    java.io.IOException: Stream closed
    Have you any ideas?
    3. Ok, i taking sample repository and adding a new datasource in it:
    Database: Oracle 8i
    Connection pool:
    Call interface OCI 8i/9i
    Data source name:
    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
    This settings are working fine in BI 10.
    In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
    Therefore Oracle 8 DB as datasource not supported. Am i right?
    4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
    Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
    Error
         View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
    SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
    Database features are defaults.
    Does anyone solve this problem?

    Turribeach, Thanks for you time.
    1. It was not a question
    3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
    4. I'm using OCI connection type
    Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
    Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
    Edited by: serzzzh on 03.09.2010 3:44

  • Problem with oracle.jbo.domain.Date

    Hi there,
    I've a problem with oracle.jbo.domain.Date,
    I'm doing this code (this part of code is used in my Session Attribute Listener):
    * This method is used to add the session id in the database, whenever user login
    public void attributeAdded(HttpSessionBindingEvent hsbe){
    if(!hsbe.getName().equals("user")){
    return;
    AmLogin am = (AmLogin)Configuration.createRootApplicationModule(
    "com.ahm.pdt001.am.AmLogin",
    "AmLoginLocal");
    try{
    hsbe.getSession().setAttribute("login", new Date(new Timestamp(
    System.currentTimeMillis())));
    am.createLogin(hsbe.getValue().toString(), hsbe.getSession().
    getAttribute("login").toString());
    } catch(Exception e){
    e.printStackTrace();
    System.out.println("Error insert data user: " + hsbe.getValue());
    } finally{
    Configuration.releaseRootApplicationModule(am, true);
    Everything is running well in Jdev 10.1.3 (I'm using ADF Faces technology), and I'm trying to deploy it on OC4J 10.1.2 and it works. But it raised an error when this part of code is runned.
    --------------caused and error------------------------
    hsbe.getSession().setAttribute("login", new Date(new Timestamp(
    System.currentTimeMillis())));
    And this is an error:
    javax.faces.FacesException: #{pdt001.loginAction}: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)     at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)     at com.ahm.filter.AhmFilterSession.doFilter(AhmFilterSession.java:45)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)     at java.lang.Thread.run(Thread.java:534)Caused by: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)     ... 23 moreCaused by: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V     at com.ahm.pdt001.listener.Pdt001AttributeSessionListener.attributeAdded(Pdt001AttributeSessionListener.java:27)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindHttpSession.setAttribute(EvermindHttpSession.java:128)     at com.ahm.pdt001.bean.Pdt001Bean.loginAction(Pdt001Bean.java:61)     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)     at java.lang.reflect.Method.invoke(Method.java:324)     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
    Does anybody have the same problem like this? I've used the same method in my previous project to create oracle.jbo.domain.Date with current time using java.sql.Timestamp, but I don't know why this error happened.
    Thx,
    Andre

    Re: oracle jbo.domain.Date issues in 10.1.3
    Sascha

  • Please Help:  A Problem With Oracle-Provided 'Working' Example

    A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
    I followed the simple steps in the Oracle-provided example:
    Doc ID: Note:116534.1
    Subject: How to use checkbox in webdb for bulk update using webdb report
    However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
    Fred
    Below are step-by-step instructions provided by Oracle to create this "working" example:
    How to use a checkbox in WEBDB 2.2 report for bulk update.
    PURPOSE
    This article shows how checkbox can used placed on WEBDB report
    and how to use it.
    SCOPE & APPLICATION
    The following example to guide through the steps to create a working
    example of this.
    In this example, the checkbox is used to select the records. On clicking
    the update button, the pl/sql procedure is called which will update col1 to
    the string 'OK'.
    After the update is done, the PL/SQL procedure calls the report again.
    Since the report only select records where col1 is null, the updated
    records will not be displayed when the report is called again.
    Step 1 - Create Table
    From Sqlplus, log in as scott/tiger and execute the following:
    drop table chkbox_example;
    create table chkbox_example
    (id varchar2(10) not null,
    comments varchar2(20),
    col1 varchar2(10));
    Step 2 - Insert Test Data
    From Sqlplus, still logged in as scott/tiger , execute the following:
    declare
    l_i number;
    begin
    for l_i in 1..50 loop
    insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
    end loop;
    commit;
    end;
    Step 3 -Create SQL Query based WEBDB report
    Logon to a WEBDB site which has access to the database the above tables are created.
    Create a SQL based Report.
    Name the report :RPT_CHKBOX
    The select statement for the report is :
    select c.id, c.comments, c.col1,
    htf.formcheckbox('p_qty',c.id) Tick
    from SCOTT.chkbox_example c
    where c.col1 is null
    In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
    htp.formOpen('scott.chkbox_process');
    htp.formsubmit('p_request','Update');
    htp.br;
    htp.br;
    Step 4 - Create a stored procedure in the database
    Log on to the database as scott/tiger and execute the following to create the
    procedure.
    Note: Replace WEBDB to the appropriate webdb user for your installation.
    In my database, I had installed webdb using WEBDB username, hence user webdb owns
    the packages.
    create or replace procedure chkbox_process
    ( p_request in varchar2 default null,
    p_qty in wwv_utl_api_types.vc_arr ,
    p_arg_names in wwv_utl_api_types.vc_arr ,
    p_arg_values in wwv_utl_api_types.vc_arr
    is
    i number;
    begin
    for i in 1..p_qty.count loop
    if p_qty(i) is not null then
    begin
    update chkbox_example
    set col1 = 'OK'
    where chkbox_example.id = p_qty(i);
    end;
    end if;
    end loop;
    commit;
    /* To Call Report again after updating */
    SCOTT.RPT_CHKBOX.show
    (p_request=>'Run Report',
    p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
    p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
    end;
    Summary
    There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
    A button is created via the advanced pl/sql coding which shows on top of the report. (The
    button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
    internally)
    When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
    The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
    p_qty is another parameter that we are passing additionally, This comes from the checkbox created
    using the htf.formcheckbox in the report select statement.
    The pl/sql procedure calls the report again after processing. This is done to
    show how to call the report.
    Restrictions:
    -The Next and Prev buttons on the report will not work.
    So it is important that the report can fit in 1 page only.
    (This may mean that you will not select(not ticked) 'Paginate' under
    'Display Option' in the WEBDB report. If you do this,
    then in Step 4, remove p_arg_names and p_arg_values as input parameters
    to the chkbox_process)

    If your not so sure you can use the instanceof
    insurance,
    Object o = evt.getSource();
    if (o instanceof Button) {
    Button source = (Button) o;
    I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
        // do that voodoo
    ]I haven't looked into why you'd be creating a new reference...

  • Remote JDBC Problem with Oracle BPM Studio

    Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
    When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
    The SQL Connection is configured as following :
    External Resource:
    Name : MyDS
    Type : SQL Database
    Supported Types : Remote JDBC
    Details:
    Database Type : BPM's Oracle Driver Version:10, 11
    J2EE : WLS
    Lookup Name : MyAppDS
    Configuration for "WLS"
    Name : WLS
    Type : J2EE Application Server
    Supported Types : GENERIC_J2EE
    Details:
    Initial Context Factory : weblogic.jndi.WLInitialContextFactory
    URL : t3://localhost:7001
    But, when i try to connect to the Database by using this configuration, I will get an Exception.
    An exception occurred while getting a resource from a connector.
    Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
    Caused by: An exception occurred while getting a resource from a connector.
    Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
    Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
         at javax.naming.InitialContext.init(InitialContext.java:223)
         at javax.naming.InitialContext.<init>(InitialContext.java:197)
         at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
         at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
         at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
         at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
         at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
         at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
         at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
         ... 12 more
    Edited by: user2262377 on Jun 22, 2009 4:01 PM

    I guess the weblogic.jar is not included in the studio.
    So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
    It is working in my simple java code. But, still not working in BPM Studio.
    The error logs:
    An exception occurred while getting a resource from a connector.
    Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
    Caused by: java.lang.Object cannot be cast to java.io.Serializable
    fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
    Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
         at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
         at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
         at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
         at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
         at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
         at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
         at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
         at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
         at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
         at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
         at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
         at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
         at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
         at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
         at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
         at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
         at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  • Problem with Oracle Designer 10

    Hi,
    I have a problem with Oracle Designer 10 version 9.0.4.7 installed in Windows 2000 platform.
    I don't know if the origin of the problem is at the server side or client side. I try to launch the repository reports but it doesn't work. The screen never appear. I have to finish the client process but the oracle session remmains:
    SID SERIAL# LOGON_TIME PROGRAM
    ============================
    36 13137 01-12-2008 des2k61.exe
    38 15583 01-12-2008 ckrpt61.exe
    The second line belongs to repository report process.
    I have to kill Oracle session manually. Do you know if the problem is in the server side or client installation??
    SGA VALUES
    =============================
    Total System Global Area 320302432 bytes
    Fixed Size 736608 bytes
    Variable Size 285212672 bytes
    Database Buffers 33554432 bytes
    Redo Buffers 798720 bytes
    Client values
    =============================
    1Gb RAM
    Windows 2000 SP4
    3Gb Virtual Mem
    2 GHz AMD
    Thanks in advance.

    I have two homes for oracle developer ..
    old ---- C:\*DevSuite*
    new -- C:\>C:\*DevSuite_1*
    I have executed the below statement .........
    C:\>C:\*DevSuite_1*\bin\tnsping disd9i
    TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 09-SEP-2
    010 19:29:22
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    C:\*DevSuite*\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (Host = VHRTY76.ASPNDT.NET)(Port = 1521))) (CONNECT_DATA = (SID = POU)))
    OK (720 msec)
    I think the new one is point to the old version 9 - sqlnet.ora and tnsnames.ora .
    How to point the new one..?
    Can I have two tns_admin as env variable ?
    Edited by: user12045030 on Sep 9, 2010 7:12 AM

  • Problem with restoring database from backupset

    Hello,
    I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
    I've restored controlfile, but I couldn't restore database - it fails with:
    RMAN-00571: =============================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
    RMAN-00571: =============================================
    RMAN-03002: failure of restore command at 08/31/2006 12:06:47
    ORA-01180: can not create datafile 1
    ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
    List of backupsets from restored controlfile
    (I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    36 Full 6.98M DISK 00:00:02 29-AUG-06
    BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    37 Full 322.96M DISK 00:00:27 29-AUG-06
    BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    List of Datafiles in backup set 37
    File LV Type Ckp SCN Ckp Time Name
    1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
    2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
    3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
    4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
    BS Key Size Device Type Elapsed Time Completion Time
    38 650.50K DISK 00:00:00 29-AUG-06
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    List of Archived Logs in backup set 38
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 32 577277 29-AUG-06 578529 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    39 Full 7.02M DISK 00:00:00 29-AUG-06
    BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
    SPFILE Included: Modification time: 28-AUG-06
    I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
    Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
    Output of command restore database validate:
    RMAN> restore database validate;
         Starting restore at 31-AUG-06
         allocated channel: ORA_DISK_1
         channel ORA_DISK_1: sid=102 devtype=DISK
         data file 1 will be created automatically during restore operation
         data file 2 will be created automatically during restore operation
         data file 3 will be created automatically during restore operation
         data file 4 will be created automatically during restore operation
         restore not done; all files readonly, offline, or already restored
         Finished restore at 31-AUG-06
    What's wrong?
    Thanks
         Paul

    Hi,
    I think, that everything seems to be OK.
    Commands which I use to validation of existence backup:
    RMAN> crosscheck backup;
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=102 devtype=DISK
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
    Crosschecked 4 objects
    RMAN> list backup summary;
    List of Backups
    ===============
    Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
    36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
    37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
    38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
    39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
    RMAN> list backup;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    36 Full 6.98M DISK 00:00:02 29-AUG-06
    BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    37 Full 322.96M DISK 00:00:27 29-AUG-06
    BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    List of Datafiles in backup set 37
    File LV Type Ckp SCN Ckp Time Name
    1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
    2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
    3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
    4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
    BS Key Size Device Type Elapsed Time Completion Time
    38 650.50K DISK 00:00:00 29-AUG-06
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    List of Archived Logs in backup set 38
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 32 577277 29-AUG-06 578529 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    39 Full 7.02M DISK 00:00:00 29-AUG-06
    BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
    SPFILE Included: Modification time: 28-AUG-06
    RMAN> restore database validate;
    Starting restore at 04-SEP-06
    using channel ORA_DISK_1
    data file 1 will be created automatically during restore operation
    data file 2 will be created automatically during restore operation
    data file 3 will be created automatically during restore operation
    data file 4 will be created automatically during restore operation
    restore not done; all files readonly, offline, or already restored
    Finished restore at 04-SEP-06
    Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
    If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
    C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
    Volume in drive C has no label.
    Volume Serial Number is E003-9FC6
    Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
    29.08.2006 11:38 <DIR> .
    29.08.2006 11:38 <DIR> ..
    29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    4 File(s) 354 036 736 bytes
    2 Dir(s) 56 865 202 176 bytes free
    C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    4 file(s) copied.
    Thanks
    Pavel

  • Is Forms 10g compatible with Oracle database 8.1.7.4.0 ?

    Hello Folks,
    Is Forms 10g compatible with Oracle database 8.1.7.4.0 ?
    Thank You
    Anna

    There shouldn't be problems. [url https://metalink.oracle.com/metalink/plsql/f?p=130:14:3453894956402291720::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,207303.1,1,1,1,helvetica]Metalink Note:207303.1

  • HP EVA6000 with Oracle Databases

    Hi Everybody,
    Does anybody work with HP EVA6000 and Oracle Databases on RHEL?
    We have the following situation (everything is 64bits):
    1) Oracle 9i Database 9.2.0.7 on RHEL4 U2 using 4 local disks RAID 0 (15000rpm each). With the following results:
    - Acceptable database performance, it needs some sql tuning but performance is acceptable for users
    - Normal user response time
    - Normal active sessions for peak time.
    2) Oracle 9i Database 9.2.0.7 on RHEL4 U2 using HP EVA6000 with 16 disks (10000rpm each). I am not an HP EVA expert but what i know is that is configured with 4 Disk Groups for Oracle Database (VRAID1). With the following results:
    - We expected same or better performance, but it was not our case. We only migrated local storage to HP EVA storage.
    - Performance starts degrading in 30 minutes when users begin doing their work, we start killing some users, we start getting more active sessions and they stay active for a long time, more "buffer gets"....in general not acceptable performance for users and business.
    - We have exact # of CPU, exact RAM, exact OS configuration, exact SGA Oracle configuration...the only change is the new storage.
    What we need is an advice of HP EVA6000 users working with Oracle Database (specially 9i on RHEL).
    HP Support says it is a RHEL problem, Oracle Support says it could be an HP EVA configuration problem, nobody gives us a workaround or explanation just to confirm what it is happening.

    Hello Miguel,
    now we changed to a HP EVA6000. And we have the same problems like you described.
    Oracle 9i Database 9.2.0.7 on SLES9 (both 64bit) using a HP EVA6000.
    Now we have a lot of buffer gets and a bad overall performance.
    Could you solve the problem?

  • Are there any problems running oracle database express 10g and iis together

    Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
    Does oracle database express cause any conflicts with iis (because of used ports etc)
    Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

    I would not expect a problem under normal circumstances.
    Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
    So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
    Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

Maybe you are looking for

  • How to remove a oracle form from read only format

    I need to personalize an Oracle form for one responsibility. But when i open through that responsibility, it is opening in read only format. When i open the same form through super user responsibility, then it is opening up-datable format. I tried di

  • Error on export from Flash CC to Javascript/HTML5

    I am trying to convert a Flash CC project to HTML5. I continually get this error: An unexpected error occurred during export. [NOSYMB (innerWheel)] innerWheel is a movieClip that contains 784 frames of frame by frame animation. The elements that anim

  • IN CLAUSE query

    My report query has IN CLAUSE which takes parameter like 1,2,16,17 when i run the report with this parameter it gives me an error ORA-01722 Invalid Number. How can i resolve it.

  • Socket.close() on both sides?

    Hello i'm creating a server-client application, but i came at a problem: i currently testing the logging out or disconnection. The protocol does this: client sends packet to server with request for logout, server pushes response back and ?closes sock

  • Wifi button does not respond; won't move

    Today I lost wifi on my iPhone.  Tried to turn it on in settings but the "button" on the screen is totally unresponsive.  Help!


HashFlare