Problem with photos' colors

Hi,
I have a problem with colors of photos which I'm using in a. InDesign document.
I've created a 20 page catalog, with first and last pages for the front and back of the cover. I placed one photo on the first page and second on the last page. When I opened them earlier on in Photoshop they were matching perfectly, so I figured that it will be the same in InDesign. When I placed them in Indesign it turned out that the photo on the first page has a different color saturation (lower) than the one on the last page. It looks as if the first page was converted to CMYK and the last page was still in RGB mode (the photos were initially in RGB).
I decided to change the color preferences of the photos in photoshop to CMYK and saved thm again for InDesign, but it didn't help (I also checked all of the doc and color preferences in InDesign and all looked fine). It seems that colors are different on the last page only. Is it possible that it has a different color preferences set up? I'm a new InDesign user and I would be gratefull for You help :-)

It sounds like you have transparency of some sort (effects, drop shadow, tranparent image?) on the front and not on the back, and that the transparency blend space is set to CMYK instead of RGB while your image is RGB.
Edit > Transparency Blend Space > Document RGB

Similar Messages

Problem with photo pixilation

I've just switched to using firefox instead of internet explorer.
Now on my Twitter and Facebook pages the photo pixilation is off resulting in bright green texturing in shadowed areas. Not sure what to do about it?

That can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.<br />
You can disable color management to test that.<br />
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management.<br />
You need to close and restart Firefox to make the change effective.<br />
See:
* http://kb.mozillazine.org/gfx.color_management.mode

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

Problem with Photo Booth backdrops

In addition to the problem of the first page effects constantly cycling, I now discovered a serious problem when trying to use backdrops. After I select the backdrop I want to use, it will appear in the main window, but it will not place my picture in the backdrop. In addition, it will merely flash the "please step out of the frame" message for a split second and then immediately say "backdrop detected." When I then snap the photo, all I get is the backdrop. I have deleted the .plist file, but that did not help. I had previously uninstalled and reinstalled the application, but the problem persists. Has anyone else experienced this problem, and, if so, have you found a solution?

I thought this issue had died and passed into oblivion. Either no one has an answer, or no one gives a ****,or both. Certainly not Apple. I seem to remember sending feedback to Apple long ago, but I never received a response. I just went to the feedback page and there isn't even a Photo Booth app. showing through which to submit feedback. Checking some of the other threads on this issue, it appears that this problem with Photo Booth has existed for quite some time, and there was a problem with placing iChat backdrops too. It seems that this app. is such a piece of crap that Apple will no longer support it. I can't understand why they continue to include it as part of the OS.
For what it is worth: I was recently at the Apple store and out of curiosity tried the app. on a MacBook Air. It (the app.) was so unstable that I didn't even bother to try to set a backdrop. I've lived without Photo Booth until now, so I guess I can continue to exist without it.
By the way: I didn't insert the asterisks. I typed d a m n, and the system inserted the ****. Interesting.

Problem with Photo Booth (NOT CRASHING)

So I updated to 10.6.2 which THANKFULLY solved the Photo Booth crashing problem... However, some effects are producing an inverted color image
Here is it what I mean:
How it's supposed to look (captured by screen shot): http://img148.imagevenue.com/img.php?image=63601Screen_shot_2009-11-12_at_4.55_122576lo.jpg
How it is being saved: http://img127.imagevenue.com/img.php?image=63605Photo_on_2009-11-12_at_16_122409lo.jpg
Any help would be GREATLY appreciated

I don't know the correct place to post this issue, but I do know that I have the same issue on my iMac with Snow Leopard. I actually have a problem with the effects page that has the cube, the clown, the cowboy, etc. All these effects save the photo wrong. The colors are off and grainy.

Lightroom 5-problems with print colors

I have Lightroom 5 and am having problems with my prints. They look great in LR, but when I upload them to different websites for prints skin tones have a grayish-green cast to them and print with the grayish-green cast. I can pull them up in other applications, i.e. Windows photo gallery and Facebook and they look fine. I checked my preferences and they are set to sRGB. Any other ideas? For example I made an invitation for a friend, the pictures I processed in LR and then used Photoshop CS4 to make the invitation. The invitation colors printed great. She liked the pictures I had taken and asked to have those too. When she printed the actual pictures they had a grayish-green tint to them but the invitation looked fine even though it was made from the same pictures that came out grayish-green. Any help is greatly appreciated!

daniellem5290598 wrote:
I have recalibrated my screen and the pictures still look the same. I looked in my LR and made sure that sRGB is selected for the color space for external editing. Is there a way to check if the pictures exported with the prophotoRGB instead of sRGB? I tried looking in properties on the photo and didn't see anywhere where it would tell me whether it was sRGB or prophotoRGB. I am kinda new to all of this so maybe I am looking in the wrong place, but I was under the details tab in properties on the photo.
The recalibration was just a "also nice to make sure you have done this". Just to check if you don't have another rare problem. The root cause of your problem is clearly that your exports are not sRGB. You set that in the export screen as Per nicely shows. You should keep the color space for external editing that you set in preferences at prophotoRGB. That one has nothing to do with your exports and you're usually better off using the default.
You can check your exported images using several options. On Macs, you simply open it in preview and do a get info (command-I) on it or use Photoshop. You can also see the color profile in the "more info" tab in the "get info" panel in Finder. In the general pane you will see the profile name. On a windows machine it is somewhat more difficult for me to tell you as I have none anywhere near but if you have Photoshop, you can open your jpeg in that and at the bottom of the window click the little sideways triangle that points to the right and select "Document Profile".

Problem with RED color in Aperture, iPhoto but NOT Preview

I'm having a weird display problem in aperture and iPhoto, as well as in the small thumbnail preview in the Get Info window in the Finder: photos with large areas of red appear over saturated and blotchy, while the same image will be displayed fine in Preview, Mail, Safari etc.
I have checked with a number of people using OSX on G4/G5 and Intel machines and running 10.4.9 and they ALL have the same problem.
An example of the problem can be found in this picture: http://oroux.com/trucs/red_bug.png
Left is the image in Preview, middle in Finder's Get Info window and right in iPhoto...
I've checked the profiles in ColorSync Utility and there is no problem on that side.
2.4GHz core2duo MacBookPro Mac OS X (10.4.9)

I don't see how it could be a profile problem, since other people (see post above) have the same problem with their pictures. Also, I did some shots over the week-end, including a girl in a bright red dress and the dress shows the same oversaturated red blotches. The image was taken in RAW with my Nikon D80, I didn't do any changes in Aperture, and I reset the colorsync profile of the MacBookPro and DELL 24" screens to their factory defaults.
And when I display the fullscreen image in Aperture, I can see for a split second the CORRECT image, then it does some "color magic" and the details goes down the drain.
Plus, if you look at this image (http://oroux.com/trucs/red/testrouge/10-4-9qt7-1-6/comparaison.png, it's big, 2MB) showing screen captures of a detail of a photo in six different OSX apps, you'll see that not two display it in the same way, which is a real problem.

Iphone 4, Trouble with photos coloration and flash strobing effect. Does anyone knows...?

Hi I am expiriencing following problems as per attached exhibits:
Photo coloration
When taking picture there is no problem. When pictures are downloaded the result however is this:
Exhibit A:
Than I am also having problem with flash strobing:
some time You are able to notice when taking picture or you see the preview:
Exhibit B:
Do any clever boffins know what is up? Preferable directly the Apple "geniuses"

Your profile says iPhone 4, is that correct? Do you have file extensions turned off in Windows Explorer? If so, when you turn them on, are you sure this is a jpeg file? If the image viewer cannot open it, then something is going wrong, as the image viewer can open most any kind of image file, including both jpeg and png.
For Exhibit B, I would say it could be a combination of the LED flash and the flourescent light that is causing the lines. It could just be out of sync from the electric 60Hz cycle of the flourescent light.
At first I would recommend a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. But one thing bothers me and that is the fact the Exhibit A picture looks good on the screen of the phone, but then displays this coloration on the computer, as well as giving you a file error. Not sure if that is an iOS issue, or a Windows issue.

Problem with photos on dvd output

Not sure where the kink is in my process, exactly, but maybe someone will have run into this before...
i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in final cut. When i use compressor to output the m2v file using the standard dvd presets, some of the stills have problems on the resulting file. not all of them look bad and it doesn't seem to be discriminating based on resolution of the original image file. I'm sure there's a good explanation, but the photos that get messed up seem to be random. some look great.
In the .m2v file played directly off of QT, they sort of just look darker, like perhaps they are interlaced strangely or something and the even or odd rows are black. but when i use that file to burn a dvd in dvd studio pro, the resulting image looks crazy messed up. Anyone know how to wrangle this one? Thanks

In case someone else runs into this problem, i did some extensive chatting with a final cut guru guy and all we could figure out is that i'm experiencing some sort of bug. that it shouldn't have been doing what it was doing. It started happening after my boss upgraded all of the studio software and quicktime to the latest versions. upon closer inspection, what was happening is that some of my photos were missing fields when exported as a qt, some weird byproduct of interlacing. we tried the settings all sorts of different ways and the problem did, indeed, go away when i changed the sequence to progressive, but i didn't want to sacrifice resolution of the rest of the footage just because of the problem with the few photos that were janky, so i found two workarounds that fixed the problem...
1) using the de-interlace effect on just the photos that were giving me problems. it lowered the resolution, but not enough to make a difference and it looked good.
2) using the motion blur effect. This filled in the missing fields and i did it at such an unnoticeable setting that it might have even looked better than the pictures i de-interlaced.
If this jogs someone's brain as to what the actual problem was in the first place and you think it's not just a bug in the system, then i'd be interested to hear how to avoid the problem in the future.

Problem with Photos in Camera Roll after 4.0.1

Hello,
I have a 16GB iPhone 3G.
I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
If I scrolled up to older pictures, the older ones were fine.
I took a new picture to test it, and that one looks fine.
So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
Is there anything I can do to fix this?
(Just for the record, my phone is not and has never been jailbroken.)

There is a solution!!
After installing iOS4.0.1 update on my 3G, I too had the black
blob in my camera roll. As posted in an earlier thread, here's
one way to resolve this problem. It worked for me!
Just email the photos that don't appear in the camera roll to myself,
delete the offending photos and then re-save them from the email.
A bit of a pain but it's a way around it. Good luck!
ErikV

Sync problems with ipod color

Hi I'm having problems copying music onto my ipod. I am running iTunes 5 with the latest iPod software (1.2 from ipod updater 2005-09-23) on a windows XP platform with Service pack 2. My iPod is connected to my computer through USB 2.0.
When I plug my ipod to my computer, everything works fine, it gets recognized, I see the "do not disconnect" icon on the ipod and it starts syncing but the problem is, way before it finishes tranfering the songs, my ipod comes back to the main menu. I can read in iTunes that the transfer is complete and that it's ok to disconnect my ipod, even though it was NOT complete!
This really bugs me because I can't put all my songs onto my ipod and have to disconnect/reconnect it all the time to actually put my songs in it. What can I do to keep the transfer "alive" ?? please someone help me.

Hi,
I have the same type of problem with my iPod 20GB color running XP Home SP2. This happens when I import a large number of songs (over 100 or so) from my CD's in iTunes at one time. It will disconnect and then restart the transfer over again several times. I figured out that when your iPod is actually connected and doing the transfer, if you right click on the iPod (example: Joe Smiths iPod) in the iTunes left side menu, and click on "update" every 40 or 50 songs or so it will transfer everything without disconnecting. I discovered this yesterday while transferring about 270 songs to my iPod after it tried to automatically do it about three times. I don't know if this is the "real" fix for this but it worked for me. The problem doesn't appear to happen with a couple of CD's worth of songs.
Good luck!

Problem with missing colors when printing

It has been sugested by HP that I try this forum for help.
The following is a copy of the email I sent them which describes my problem, I hopesomeone can help! Thanks.
language_code : en
language : English
Country of Residence : France
product_line : 83
product_oid : 59868
product_name : HP Deskjet 840c Printer
part_number : C6414K,C6414J,C6414A,C6414G,C6414N,C6414H
purchase month : 8
purchase year : 1996
problem area : color and print quality problems
serial number : [Text removed for privacy]
operating system : Microsoft Windows Vista Home Premium 32
How is your product connected to your PC? : USB Cable
problem description : When I try to print a page containing coloured items the coloured parts fail to print. (The items are totally missing, they are not replaced by grey scale images) I have done all the usual things as per list:-
troubleshooting : 1) Rebooted my computer.
2) Disconnected the USB cable and reconnected it.
3) Changed the colour cartridge.
4) Examined the printer settings in the control Panel, colour is selected and all other settings seem normal.
5) De-selected the printer as the "Default Printer" and re-installed it.
6) Run software that checks the driver is up to date and it is.
7) Printed the built in test page "beautiful color made easy" only the header and footer print,no colour!
setting changes : No, nothing has been changed.
PS. I have owned my printer for many years and cannot remember the purchase date.
tech skill : Intermediate
first name : Grant
last name : W[text removed for privacy]
This question was solved.
View Solution.

Hi - Go ahead and try the steps in this document. It will walk you through cleaning the contacts on both the cartridge and in the carriage. What can happen over time is ink residue can accumulate on the contacts preventing the ink cartridges from working properly. If this doesn't resolve the issue, try setting the cartridge with the nozzles face down on a damp paper towel for about 45 seconds just to resolve any problems with the ink nozzles.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Problem with photos' colors

Similar Messages

Maybe you are looking for