Problem with Places???

Hello,
Is there a way to " reset " Places to be empty and remove all locations.
I've tried using W_indows -> Manage My Places_ to delete the locations but a lot of photos just seem to tag themselves as being my home city (just the name) and did not appear on the list in Manage My Places.
I've tried retagging the photos with a a random address but when I then try to delete it they still appear in Places.
Regards.

You can try the following but make a backup copy of your library first:
1 - open the library package like this:
Click to view full size
if that doesn't work you can fall back on your backup copy.
OT
2 - open the "Metadata Backup" folder.
3 - move the "Places" and "GPS Tracks" folders to the Desktop.
4 - launch iPhoto and check for Places.

Similar Messages

  • Problem with places, the map is disappear

    HI everyone,
    I notice today a problem with iphoto 9 (ver 8.1.2), if i go to places the map on the right is disappear, i have geotagged some photos but nothing, so I have no map inside spaces, any guess?
    Thank you
    Michele

    in the iPhoto preferences is look up places set to automatically?
    When you click on the little "i" in the lower right hand corner of any of these photos does it flip over and show the location?
    LN

  • CreateTextField and _height: Problem with Placement of Text Fields

    I'm using createTextField to create several text fields
    dynamically. I'm also using an external XML file and a style sheet
    to populate the text fields.
    My problem is that I'm trying to position the various text
    fields on the page so that they are spaced evenly on the page
    (regardless of how much content they might contain). I'm trying to
    use _height of the prior text fields to place subsequent text
    fields, but I'm getting very inconsistent results. When I trace the
    value of _height, I get differing results, even if I don't actually
    change any of the parameters. So, the question is...is there a way
    for Flash to get the height of a dynamically created text field
    that's populated via an exteral XML file and using CSS? I know
    that's asking a lot, but I'm trying to avoid using scroll bars if
    at all possible.
    Thanks for any pointers.
    Bill

    i assume you're using multiline textifields with a fixed
    width and autoSize="left".
    flash will report the correct _height of your textfields IF
    you access the _height property after your htmlText has been
    assigned to your textfield. ie, you're probably seeing inconsistant
    results because you're not waiting until all data needed to
    populate your textfield has loaded.

  • Problem with Placements rendering multiple times

    I am having a problem of portlets rendering more than once. Or more specifically,
    it appears placements are rendering more than once. Anyone have this problem.
    It seems to show its ugly head switching between VIEW and EDIT mode in portlets
    with Backing files. Here is the only output I get.
    <Mar 8, 2004 5:10:39 PM EST> <Warning> <netuix> <BEA-421534> <Expecting one placement
    got at least one more: username MYLOGIN placement
    Placement:
    placementId: 26004
    DesktopInstanceId: 22003
    PageInstanceId: 6004
    PlaceholderDefinitionId: 6010
    position: 1
    PortletInstanceId: 36007
    BookInstanceId: null location 1.>
    cheers
    andrew

    Hi Andrew,
    I am getting this kind of problem while using PortalVisitorManager::movePlaceableInstances()
    in my JPF code.
    It seems that one call resutls in adding a single portlet many times (8 times).
    The confusing part is that it should move a portlet instance from one location
    to other location but it adds new instances...
    did u get around with u'r problem, do u have some solution..
    any clue.....
    regards,
    Jitendra Kumar.
    "Andrew Clifford" clifforda.no.spam.comcast.net wrote:
    >
    I am having a problem of portlets rendering more than once. Or more specifically,
    it appears placements are rendering more than once. Anyone have this
    problem.
    It seems to show its ugly head switching between VIEW and EDIT mode
    in portlets
    with Backing files. Here is the only output I get.
    <Mar 8, 2004 5:10:39 PM EST> <Warning> <netuix> <BEA-421534> <Expecting
    one placement
    got at least one more: username MYLOGIN placement
    Placement:
    placementId: 26004
    DesktopInstanceId: 22003
    PageInstanceId: 6004
    PlaceholderDefinitionId: 6010
    position: 1
    PortletInstanceId: 36007
    BookInstanceId: null location 1.>
    cheers
    andrew

  • Problem with Place call in a script with HTTP trigger

    Hi!
    I'm trying to develop a sample script, associated to an application that has an HTTP trigger. I'm working with UCCX Premium 8.5.1
    The trigger is working OK, but the place call output is allways "unsuccessful". The number to call and the redirect number are extensions of the same IPT platform.
    Below you will find print-screen of the script. Besides, I'm attaching the .aef file.
    Any help would be appreciated. Thanks in advance.
    Roy.

    The value in your "Call Control Group" must match the "Group ID" in your CM Telephony Call Control Group Configuration
    This is from my lab system so the "AgentsLoggedIn" variable would need to contain 1 or 3. You are telling the script which CTI port group to make the call with. You have a 0 in your AgentsLoggedIn so do you have a Group ID of 0?
    Your CTI group must be able to make the call so must have the correct partition/Calling Search Space
    Graham

  • Problem with Places in Aperture

    Using OS X 10.9.2 and Aperture 3.5.1. When choosing a project in Aperture and click on places a map appears but no photos in the bottom browser. Just a blank strip of nothing. I deleted and reinstalled Aperture, but no luck.

    Is the search field in the Browser cleared? If not, clear it.  You should be seeing "Show All"

  • PROBLEM WITH PLACEMENT OF BOUGHT TUNES

    When I buy tunes, alot of times, it will be listed in my library and not in my purchase music playlist. What's up?

    slr,
    Only tracks purchased from the iTunes Music Store will be placed automatically in the Purchased Music playlist. Are the tracks that are not included in this playlist purchased from elsewhere?
    ~n

  • Serious problems with WYSIWYG

    Hi,
    I have some serious problems with placements in 3.0. Items sits just fine i design mode, but in quick preview or in browser preview, items goes all over the place.
    The only way to go around the problem is to shift the item in design mode and make successive previews to see, if the item now sits correct. And even this metode is not optimal, because sometimes this action moves other objects on the page in preview as well....
    This ofcourse means, that I do not have any WYSIVYG at all.  And the worst is, that I never know which of the items on a page will course the next problem. Very, very frustrating!
    My last updated version (must have been 2.3...) was faultless. I made a customer site in this version before upgrading.
    This page has now been approved, but opening the site in version 3.0 is futile. In designmode everything looks fine, but in preview it looks like something I tried to code myself.... I don't know what I will tell my customer, but it's not good. Not good at all.  
    I have attached two screendumps. The first one shows the page in design mode. Everything looks fine and every item sits correct. On the second screendump you see the slideshow is going up and behind the topbar, which is center pinned. Notice that there is no scrollbar, so I can't scroll down. This problem is just one of the above mentioned. Other problems are text or pictures that refuses to align horizontally, pictures that goes way out to the top - or the bottom....
    I tried to check the sticky footer on and off, but no result either. I have even rebuilt the version 2 site, pasting the items anew, but still it goes wrong in the browser. 
    Am I the only one experiencing this problem? If you want to see the muse file, you are welcome.
    Regards a very unhappy customer  

    Hi Sachin, no, But I do have a center pinned topbar. I have tried to un-pin the topbar, but the problem with misplaced items still appears. Its important to emphasize that in designmode everything looks fine, but in preview or a browser files are misplaced or hidden behind each other.
    I tried to check the sticky footer on and off, take away footers on the masterpage etc. because it seems that something on the page is pushing or attracting some of the placed items.
    The problem basically is, that Muse 3.0 does not give me WYSIWYG, and that is a dissaster for a designer!
    Regards
    John
    Sendt fra min iPad
    Den 19/12/2012 kl. 07.23 skrev "Sachin Hasija" <[email protected]>:
    Re: Serious problems with WYSIWYG
    created by Sachin Hasija in Adobe Muse Bugs - View the full discussion
    Hello,
    Please confirm if you have the items Right pinned? There is a known issue with Right pinning of items and restarized items in footer and our team is working on it to get them fixed as soon as possible.
    We should have a Muse update available very soon which fixes these issues and a few others.
    Apologies for the inconvenience.
    Regards,
    Sachin
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4932472#4932472
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4932472#4932472
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4932472#4932472. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with decimal places and formatting

    Hi , we are having problems with an add on running on different localization companies. Decimal places separatd by "," differ from other localizations. We dont know if this is a SQL collation setting or somethng related to code or requirements to run add ons on different servers and languages.
    Any ideas??
    Thanks

    Hello
    Follow up with this thread:
    [Re: How to get the numeric value of DocTotal from UI API]
    Regards,
    J.

  • Problem with vhba and dynamic vnic placement

    Hello all,
    I have a problem with vnic/vhba placement policies on an UCS-B:
    When a configure a Service Profile, evrything is good:
    - I use a "specify manualy" vnic/vhba placement policy  and can create this configuration:
    - vhba 0 : Order 1
    - vhba 1 : Order 2
    - veth0 : Order 3
    - veth1 : Order 4
    - veth 2: Order 5
    - veth 3: Order 6
    - 8 Dynamic vnic : Order 7 to 14
    As soon as i associate this SP with a B200M2 (with palo), UCS manager change this order like that:
    - veth0 : Order 1
    - veth1 : Order 2
    - veth 2: Order 3
    - veth 3: Order 4
    - 8 Dynamic vnic : Order 5 to 12
    - vhba 0 : Order 13
    - vhba 1 : Order 14
    I've tried several placement policies (auto, exclude dynamique from vcon 1, ....) but it's still the same.
    I need to maintain previous order with first vhba, then vnic and finaly dynamic vnic...
    My config:
    - 1* UCS 5108
    - 4 *UCS B200M2 with palo adapter
    - UCS MANAGER 2.0(1q)
    Does someone know this problem and how to solve it ?
    Thanks in advance
    Regards
    Sebastien.

    Sebastien,
    When using dynamic vNICs you can't define more than one physical NIC (eth0 and eth1).  If you try to create more than two vNICs (using a single VIC) with a Dynamic vNIC policy, it should error out on you during association.
    The vCon connection policy is really only used for full width blades with dual mezz cards populated.  This gives you some control as to which mezz card and interface vNIC/vHBAs are placed on.
    With a B200, the only virtual PCI slots you'll have will be 1 and 2.  To my understanding you need the vHBA's as the lowest PCI device # - is that correct?
    For your placement policy, set slot 1 to be "Assigned Only", and leave the rest set as "All".  Next assign your vHBAs both to Slot 1, and click ok.  Associate the Service Profile to the blade and report the results.
    This should set the desired placement and ordering for your vHBAs as the lowest.
    Regards,
    Robert

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

  • How do I find which photo iPhoto is telling me I have a problem with? I'm trying to buy a book I've formatted, but in place of the filename, it just calls it "(null)". All of the photos I'm using have names.

    How do I find which photo iPhoto is telling me I have a problem with?
    I'm trying to buy a book I've formatted, but in place of the filename, it just calls it "(null)".
    All of the photos I'm using have names.

    That same one others seem to have gotten: "Unable to Assemble Book -- There is a problem with the photo with the filename “(null).” The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book"
    I've tried restarting iPhoto with the option and command keys pressed, and asking it to repair permissions, but still have the same message...

  • HT5262 I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

    I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

    anduran wrote:
    I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device
    Basic  troubleshooting
    Reset
    Restore with back up and if required as new

  • I have problems with google maps at IPhoto. It recognizes the place, but gives not the map.

    I have problems with google maps at IPhoto. It recognizes the place, but gives not the map. It gets grey. You do not even see the world in black and white. What is the problem and what can I do?

    in the iPhoto preferences is look up places set to automatically?
    LN

  • I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

    I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

    AppleWorks has never been available for legal download.
    Have you done the usual trouble shooting steps:
    Quit AppleWorks
    Delete most or all of the Recent Items list.
    Remove the Preferences files to the Desktop or to the Trash.
    Launch AppleWorks to see if the problems remain.
    You'll find Recent Items in:
    username > Documents > AppleWorks User Documents > Starting Points > Recent Items
    There are several preferences files.
    Go to:
    username > Library > Preferences
    Locate, select and delete the file com.apple.appleworks.plist
    Still in the Preferences floder, locate and open the folder AppleWorks.
    Select and delete the two Cache files and the Preferences file.
    Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
    Regards,
    Barry

Maybe you are looking for