Problem with playing mu

hi everyone, sorry if this is posted somewhere else.
well i have a audigy 2 sound card and a plaintronics usb connected headphones with mic. my problem is that when im on a teamspeak server and talking with friends some times we play music through the headphones so everyone can hear; now i've tried clicking the "what u hear" box but my friends still dont hear it, now i know i could just hold my mic up to the speakers but the sound is not as good.
if any of u could give me some info it would be greatly appreiciated.
ty

if it should be important... the directories on my player are:
audiobook/folder, folder2, folder3, folder4
music/*.mp3 [just several songs in mp3-format]
when the last track of "folder4" has finished playing, the muvo continues playing track of the "music"-folder

Similar Messages

  • I have problem with playing stream  fullscreen. it goes black but with sound

    i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
    s

    Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again

  • Problems with playing songs in iTunes

    as the subject says. I have som problems with playing songs. not everyone just a some..
    If we take for example that a song is 8min. then at 1.40 it just stops and goes to the next one. I can jump over it with pressing in the middle for example. it plays. as normal. UNTIL. 3 mins. then the same problems appear. I don't really understand how. just between 1.40-1.50 iTunes thinks that the song is finished. I know my english isn't so good but cuz there is no swedish support. I have to write here. any answers would be good

    I'm having a similar problem.
    Every now and then, a track from a ripped CD or from iTunes or from eMusic will "look" OK in iTunes (or on my iPod), but when the track plays, it gets partially through and it jumps to the next track in the playlist.
    For example, if playback of track 1 pauses and jumps to track 2 at 1:30 into playback of track 1, & I click on 1:31 or later in track 1, the rest of track 1 will play fine. But if the playback of track 1 starts at the before the "skip point," the track will stop & iTunes (or iPod) goes on to the next track in the playlist. If I locate the file (on my external drive) and play it in the finder, there's always buzzing sound at the point where the iTunes jumps to the next track.
    For ripped CD's this is not a huge deal, I just re-rip & usually all is well. With eMusic, I can download again, but with iTunes, I have to file a complaint & so far they've just credited my account, which is OK, but time consuming.
    At first I thought the problem was with my optical drive, but then the problem started happening with downloads from iTunes and eMusic as well. NONE of these shenanigans happened before I upgraded to iTunes 7.6, so I'm wondering if that's where the problem is. One thing's for sure: I'm not going to "jump" at the next upgrade of iTunes!
    I'm totally stumped & bummed. iTunes used to be a really good friend, now I find myself wondering if I should bother with putting my entire CD collection on iTunes if it's no longer as reliable as it used to be.

  • Problem with playing HD videos

    Hello,
    My problem is with playing HD videos ( 720p or Full HD).
    After upgrading Windows on my laptop and installing drivers, everything was fine till i tried to solve the win 8.1 problem with display drivers and inability to change the level of brightness. After that I discovered that the laptop can't play videos in higher res when they are offline (they become choppy and start to lag behind audio), so i figured the problem is in codecs or the player because any video was playing online. I have tried different codec packs like K lite or FFdshow, tried many players also like VLC, Sm, BS, WM Classic...nothing helped. So  i deleted all those players and codecs so now i cant play HD videos online either.
    Also i have noticed that when i start any hd video CPU usage goes up to 95%.
    Any suggestions what should i do next ?

    Hi there @milosevarsen 
    I understand that you are having performance issues when watching videos. I am happy to help. Since your CPU usage is climbing to 95%, that is a part or symptom of the problem. 
    Work through this page. The main thing is to make sure you control what is running on your system and the amount of available memory. So you will want to look for  viruses and malware, and then what other applications are loaded on your system. Over time these tend to accumulate, and slow down your computer.
    Resolving Slow System Performance (Windows 8)
    The other option would be to look at possibly upgrading your memory. When a file is much larger than the available memory, you are going to see the CPU running harder.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Problem with "play to device" on windows media player

    Hello, I'm having a problem with the play to device feature of windows media player.  I am trying to use it to play music files to my T.V.  It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
    my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens.  No error messages or freezes either, it's as if i never clicked play.  I thought this might be a limitation with the t.v. or my network
    (im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.  Therefore, i know this is a problem with windows media
    player and not my t.v., network or computer.  This is a problem because i don't want to play all my music, just my playlist.  Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
    is not only time consuming and tedious but takes up space on my hard drive)  how do i remove this limitation or otherwise get around it?  Thanks!
    P.S.  Out of curiosity, why does this limitation exist and what causes it?

     when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.  
    Hi,
    According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
    If so,I think this method is different with "play to" feature.
    Also,we haven't found any limitation with Windows media player.
    Regards,
    Kelvin Xu
    TechNet Community Support

  • Samsung Fascinate, problems with playing music via USB port on car stereo

    Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc.  Now, my stereo does not recognize the device, and cannot read the files.  I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable.  She did a hard reset which did not resolve the problem.  We tried one of the other employee's Fascinate in my car, which did not work either.
    So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
    Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
    Anyone else have this issue with music player and USB connection?

    txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
    It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
    Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
    What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
    Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

  • Problem with play video on TV

    sorry my english. I have problem with some VGA cards with TV-out.
    When i set on VGA properties clonning view / nView / and i play video via windows media player, on secondary monitor is blank screen - in media player. Desktop is show correctly.. Is this direct show problem ? Is some way to fix this problem ?
    thanks

    I have to assume that the tech support people took you through the basics, like eprebooting the iPad and quitting the videos app, but here is something that sometimes help with the "black, blank" video screen.
    Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

  • Having PROBLEM with playing videos on my 5800

    Hi all,
    I bought my nokia 5800 2 days ago, and i am havig a problem with my videos.
    When i try to play a video (MP4) SOMETIMES it plays it without a problem, but SOMETIMES it plays a black screen with sound. And the most strange thing is it can play a video and in few hours it will just play sound on the same video!!
    Please try to help..

    pavilion_alex wrote:
    phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
    download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
     ...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
    Message Edited by garnett on 26-Oct-2009 12:49 PM

  • Big problem with playing videos on Vista

    I have a big problem with iTunes and Quick Time on Vista. I know other people in the german cmmunity who have it, too.
    If ich want to play a video with iTunes or Quickt Time my PC starts wokring very heavy. Then the programm shut down. Sometimes there is a bluescreen, too.
    In iTunes it is enough just to leftclick on a video an the programm is freezing without an error message.
    I bought a new iPod classic some days ago. With this error i can't use it and 350 € would be thrown away.
    I installed both prgramms again and again but that's no use.

    Seems to be a hard drive issue. I sometimes get the blue screen of death or a message that one of my 2 raid0 hard drives is starting to fall down. If I restart the PC (3 seconds on the power button... since iTunes blocked everything) and declare the hard drive is OK using the Intel Matrix soft provided by Dell on their website, everything is back to normal (as long as I don't use iTunes). Problem only occurs with iTunes. I am currently doing a backup of my complete HDD to an external drive. I'll try moving my iTunes library to this drive and see if it works better from a non raid 0 drive. Will keep you informed. But an external drive is always VERY slow compared to an internal so it can only be a degraded mode solution to the problem. Apple please do something!!!

  • SAP TAO 2.03 - problems with playing scripts

    Hi
    We are using QC 10, QTP 10 and SAP TAO 2.03
    While recording scripts TAO catches up all parameters that were used during the PFA recording, but when we try to play the script we face problems with Test Data. Although all data is set up in the Data TAble, and tehre is full logic in the script we can't execute the test - what I mean by that - everything starts and clicks but in steps that require providing with test data ERP is not populated by the test data (it looks like field were we should write data is not recognised).
    What could be the reason for such a situation ?
    Has anyone faced similar situation?
    Hope to get some help from you experts
    Best regards

    Can you check your log file and see what type of errors are  you are getting?
    As for as i know there are some limitations with PFA, you can not record with F4 option or combo boxes etc..
    If you are recording using PFA with F4 option,  you will get session manager error of if u r using combo boxes, data will not select properly. while its recording it will take but when  you reply some times it won't.
    if some of the components are not working , then you need to remove those and add existing components.
    Let me know how it goes.

  • Problems with play videos in the latest version of iTunes

    There is a curious problem with the latest version of iTunes. If you play the videos in Quickplay as a standalone, the videos play fine, but within iTunes whether within it or in a separate window, the videos start out choppy. I am using an ATI 5770 with 1G ram. The machine is an i7 Core 870 with 8G of ram. I have turned off the 3D accelator, etc. So, don't point me to iTunes stock advice concerning this. Been there, done that.

    Hello there, ondrafromczech.
    The following Knowledge Base article offers some practical steps for troubleshooting performance issues when using AirPlay or AirPlay Mirroring with your Apple TV:
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
    Resolve performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express.
    Try these suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    If you are using iTunes, please see these troubleshooting guidelines.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Since updating Firefox I have problems with playing Zynga games

    since updating Firefox I have problems with the Zynga games I am playing. The functions often stop working so I have to reboot the game. Also there are often a lot of items missing on my screen so I can't play at all

    I have this problem, as well, since the upgrade to 4.0.1. After the upgrade, I found several 'Recovered Files' in my Trash. On taking a look, they all had to do with the Crowdstar app. Happy Aquarium, I believe, but there are several folders of them. Some of them could have to do with Zynga's FarmVille.
    However, after repeated problems, I installed Chrome 10. to see if the Facebook apps. would work. They did, without problems. That tells me the folders in Trash shouldn't have anything to do with whether they operate or not but it has something to do with something Firefox has done, or not done, with this upgrade. Frankly, I'm baffled and more than a little annoyed. :/
    However, thinking back to the upgrade, it happened suddenly while I was on the phone with AppleCare on another matter. It was they who suggested I needed to upgrade my browser and I did it immediately, on-the-spot. It wasn't what you would call a 'clean install' because I was on the phone but also online with AppleCare. The process went so fast, I remember there were things about the installation that didn't quite seem right and I do remember that the earlier version of Firefox was not removed prior to the upgrade. Is there any chance something could be out-of whack because of this? If so, I need to know how to save my passwords, bookmarks, profile, and any other critical info that would need to be transferred.

  • Peculiar problem with playing media off of an HFS+ partition

    Hi guys,
    I have Arch Linux installed on my Macbook Pro, and I need to play the music and videos off of my HFS+ partition in Linux. I want to use VLC and Banshee, but both seem to be having problems with this.
    Here is the issue:
    1. I can read/write to the HFS+ partiton as a normal user
    2. I can play music and videos with mplayer off of that partition
    3. However, VLC will not open/play anything off of that partition
    4. Banshee marks the music files that I have imported from that partition with an 'X' when I try to play them and does not play them
    5. VLC and Banshee will play anything on my Linux partition (including the same file with the same permissions)
    I can't seem to figure out why VLC and Banshee refuse to play anything off of that partition even though I have read/write permissions to it. Mplayer works fine, though.
    Please help!
    -Chetan
    More info:
    Here is how the partition is mounted:
    /dev/sda2 /media/mac_hd hfsplus rw,exec,auto,users 0 0
    Permissions on a certain mp3 file I am trying to play:
    [chetan@chetan-macbook mac_hd]$ ls -l It\'s\ Going\ Down.mp3
    -rwxr-xr-x 1 chetan chetan 4841568 2009-04-28 09:59 It's Going Down.mp3
    VLC debug output trying to play that file in the HFS+ partition:
    qt4 debug: New item: /media/mac_hd/It's Going Down.mp3
    main debug: adding item `It's Going Down.mp3' ( /media/mac_hd/It's Going Down.mp3 )
    main debug: rebuilding array of current - root Playlist
    main debug: rebuild done - 1 items, index -1
    main debug: starting new item
    main debug: processing request item It's Going Down.mp3 node Playlist skip 0
    main debug: resyncing on It's Going Down.mp3
    main debug: It's Going Down.mp3 is at 0
    main debug: creating new input thread
    main debug: Creating an input for 'It's Going Down.mp3'
    main debug: waiting for thread initialization
    main debug: thread started
    main debug: thread 2952383376 (input) created at priority 10 (input/input.c:370)
    main debug: `/media/mac_hd/It's Going Down.mp3' gives access `' demux `' path `/media/mac_hd/It's Going Down.mp3'
    main debug: creating demux: access='' demux='' path='/media/mac_hd/It's Going Down.mp3'
    main debug: looking for access_demux module: 3 candidates
    main debug: TIMER module_Need() : 0.100 ms - Total 0.100 ms / 1 intvls (Avg 0.100 ms)
    main debug: creating access '' path='/media/mac_hd/It's Going Down.mp3'
    main debug: looking for access module: 5 candidates
    vcd debug: trying .cue file: /media/mac_hd/It's Going Down.cue
    vcd debug: could not find .cue file
    access_directory debug: opening directory `/media/mac_hd/It's Going Down.mp3'
    main debug: using access module "access_directory"
    main debug: TIMER module_Need() : 0.079 ms - Total 0.079 ms / 1 intvls (Avg 0.079 ms)
    main debug: Using AStream*Stream
    main debug: pre-buffering...
    main debug: deleting item `It's Going Down.mp3'
    access_directory debug: /media/mac_hd/It's Going Down.mp3 directory is empty
    qt4 debug: Updating the stream status: 3
    qt4 debug: New Event: type 1102
    qt4 debug: Updating the stream status: 2
    main debug: received first data for our buffer
    main debug: pre-buffering done 1408981 bytes in 0s - 33435 kbytes/s
    main debug: creating demux: access='' demux='directory' path='/media/mac_hd/It's Going Down.mp3'
    main debug: looking for demux module: 1 candidate
    main debug: using demux module "access_directory"
    main debug: TIMER module_Need() : 0.117 ms - Total 0.117 ms / 1 intvls (Avg 0.117 ms)
    main debug: looking for a subtitle file in /media/mac_hd/
    main debug: `/media/mac_hd/It's Going Down.mp3' successfully opened
    main debug: rebuilding array of current - root Playlist
    main debug: rebuild done - 0 items, index -1
    main debug: EOF reached
    main debug: control type=1
    qt4 debug: New Event: type 1103
    qt4 debug: Updating the stream status: 3
    main debug: finished input
    main debug: dying input
    main debug: removing module "access_directory"
    main debug: removing module "access_directory"
    main debug: thread ended
    qt4 debug: Updating the stream status: 8
    main debug: dead input
    main debug: thread 2952383376 joined (playlist/engine.c:244)
    main debug: TIMER input launching for 'It's Going Down.mp3' : 43.636 ms - Total 43.636 ms / 1 intvls (Avg 43.636 ms)
    main debug: starting new item
    main info: playlist is empty
    main debug: nothing to play
    VLC debug output playing the same file on the Linux partition:
    qt4 debug: New item: /media/It's Going Down.mp3
    main debug: adding item `It's Going Down.mp3' ( /media/It's Going Down.mp3 )
    main debug: rebuilding array of current - root Playlist
    main debug: rebuild done - 2 items, index 0
    main debug: dying input
    main debug: control type=0
    main debug: control: stopping input
    main debug: removing module "mpeg_audio"
    main debug: removing module "mpga"
    main debug: removing module "access_file"
    main debug: removing module "mpeg_audio"
    main debug: thread ended
    qt4 debug: Updating the stream status: 8
    main debug: thread 2948737936 joined (input/decoder.c:248)
    main debug: killing decoder fourcc `mpga', 0 PES in FIFO
    main debug: removing module "mpgatofixed32"
    main debug: removing module "bandlimited_resampler"
    main debug: thread ended
    main debug: thread 2935872400 joined (alsa.c:742)
    main debug: removing module "alsa"
    main debug: removing module "trivial_mixer"
    main debug: thread ended
    main debug: dead input
    main debug: thread 2974059408 joined (playlist/engine.c:244)
    main debug: TIMER input launching for 'It's Going Down.mp3' : 69.642 ms - Total 69.642 ms / 1 intvls (Avg 69.642 ms)
    main debug: starting new item
    main debug: processing request item It's Going Down.mp3 node Playlist skip 0
    main debug: resyncing on It's Going Down.mp3
    main debug: It's Going Down.mp3 is at 1
    main debug: creating new input thread
    main debug: Creating an input for 'It's Going Down.mp3'
    main debug: thread started
    main debug: waiting for thread initialization
    main debug: `/media/It's Going Down.mp3' gives access `' demux `' path `/media/It's Going Down.mp3'
    main debug: creating demux: access='' demux='' path='/media/It's Going Down.mp3'
    main debug: looking for access_demux module: 3 candidates
    main debug: TIMER module_Need() : 0.102 ms - Total 0.102 ms / 1 intvls (Avg 0.102 ms)
    main debug: creating access '' path='/media/It's Going Down.mp3'
    main debug: looking for access module: 5 candidates
    vcd debug: trying .cue file: /media/It's Going Down.cue
    vcd debug: could not find .cue file
    access_file debug: opening file `/media/It's Going Down.mp3'
    main debug: using access module "access_file"
    main debug: TIMER module_Need() : 0.218 ms - Total 0.218 ms / 1 intvls (Avg 0.218 ms)
    main debug: Using AStream*Stream
    main debug: pre-buffering...
    main debug: received first data for our buffer
    main debug: pre-buffering done 1408981 bytes in 0s - 623169 kbytes/s
    main debug: creating demux: access='' demux='' path='/media/It's Going Down.mp3'
    main debug: ID3v2.2 revision 0 tag found, skipping 3040 bytes
    main debug: looking for demux module: 52 candidates
    main debug: looking for packetizer module: 18 candidates
    main debug: using packetizer module "mpeg_audio"
    main debug: TIMER module_Need() : 0.059 ms - Total 0.059 ms / 1 intvls (Avg 0.059 ms)
    main debug: using demux module "mpga"
    main debug: TIMER module_Need() : 0.161 ms - Total 0.161 ms / 1 intvls (Avg 0.161 ms)
    main debug: looking for a subtitle file in /media/
    main debug: looking for meta reader module: 2 candidates
    main debug: using meta reader module "taglib"
    main debug: TIMER module_Need() : 0.457 ms - Total 0.457 ms / 1 intvls (Avg 0.457 ms)
    main debug: removing module "taglib"
    main debug: `/media/It's Going Down.mp3' successfully opened
    mpeg_audio debug: MPGA channels:2 samplerate:44100 bitrate:160
    main debug: selecting program id=0
    main debug: looking for decoder module: 31 candidates
    main debug: using decoder module "mpeg_audio"
    main debug: TIMER module_Need() : 0.133 ms - Total 0.133 ms / 1 intvls (Avg 0.133 ms)
    main debug: thread 2935872400 (decoder) created at priority 5 (input/decoder.c:217)
    main debug: thread 2974059408 (input) created at priority 10 (input/input.c:370)
    qt4 debug: Updating the stream status: 3
    main debug: control type=1
    main debug: thread started
    mpeg_audio debug: MPGA channels:2 samplerate:44100 bitrate:160
    main debug: no aout present, spawning one
    main debug: looking for audio output module: 4 candidates
    alsa debug: opening ALSA device `default'
    main debug: thread 2948737936 (aout) created at priority 15 (alsa.c:687)
    main debug: using audio output module "alsa"
    main debug: TIMER module_Need() : 91.497 ms - Total 91.497 ms / 1 intvls (Avg 91.497 ms)
    main debug: thread started
    main debug: output 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
    main debug: mixer 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
    main debug: no need for any filter
    main debug: looking for audio mixer module: 3 candidates
    main debug: using audio mixer module "float32_mixer"
    main debug: TIMER module_Need() : 0.072 ms - Total 0.072 ms / 1 intvls (Avg 0.072 ms)
    main debug: input 'mpga' 44100 Hz Stereo frame=1152 samples/1053 bytes
    main debug: filter(s) 'mpga'->'fl32' 44100 Hz->44100 Hz Stereo->Stereo
    main debug: looking for audio filter module: 24 candidates
    main debug: using audio filter module "mpgatofixed32"
    main debug: TIMER module_Need() : 0.062 ms - Total 0.062 ms / 1 intvls (Avg 0.062 ms)
    main debug: found a filter for the whole conversion
    main debug: filter(s) 'fl32'->'fl32' 48510 Hz->44100 Hz Stereo->Stereo
    main debug: looking for audio filter module: 24 candidates
    main debug: using audio filter module "bandlimited_resampler"
    main debug: TIMER module_Need() : 0.086 ms - Total 0.086 ms / 1 intvls (Avg 0.086 ms)
    main debug: found a filter for the whole conversion

    See this thread on the VLC forums. The VLC devs have stopped supporting HFS+ until a bug in the filesystem is fixed.
    http://forum.videolan.org/viewtopic.php … 9&start=15

  • Problem with playing video via composite av cable on iPod classic 2009 model 160gb

    Things went well, after  purchasing the new Ipod classic 160 gb i tryied to watch movies on my LED TV via Composite AV Cable.  I did it once. Everything worked correctly & I was able to see my photoes, watch movies.  Today i tryied to connect it again to the TV via av composite cable. The TV Out was switched on. But i could hear only audio. No video. I tryied all possible configs for Ipod an for tv set & no result. If i choose on my Ipod to ask me  first if i want to switch on the AV out, the Ipod shows me a message that i should connect the video accessory (but it  is already connected!). If i choose simply to switch on the TV Out without asking  me it will play either sound only on the TV, either the playback on the Ipod is ending after 20 seconds of show time.
    Without AV Cable connected Ipod is working normaly in terms of video playback. Also the device is working normally with the ITunes.
    Please help. Where is the problem. The AV composite cable? TV set? Or iPod itself?

    Hi Rusbug,
    I am having the same issue with my iPod Classic 160gb not playing video on the TV via Composite cable as you posted in march!
    did you get a solution for the issue??
    desperate to know what to do next.
    thanks

  • [Solved] Problem with playing a certain .mkv movie (using mplayer)

    Firstly, I have no idea about whether this is a issue of mplayer itself or the enviroment it's being run in but I'll try here first
    I got this movie that has a few points in it (always the same) where the player just stops playing the video, when I ran the player in terminal it says End Of File is reached. If I skip over such point I can keep on watching... ..until it happens again in about an 45 mins or so.
    after that I tried mplayer2 with similar results, only this time it says: "MPlayer interrupted by signal 11 in module: flip_page"
    Of course I googled this and it seems a few people have had similar problems but I've found 0 actual solutions to this. It leads me to think that either I'm just doing something wrong and I should have configured something somewhere or this is just a very rare problem. So which one is it? Is there anybody here who could tell me what causes this and how to fix it?
    (by the way MPC-HC in win7 plays the video just fine)
    Last edited by Rayniac (2011-09-15 16:30:15)

    Mr.Elendig wrote:Build mplayer with debug symbols, get traces, report to mplayer devs
    That would seem to be the only thing to do here as I found that dragon player works with that vid flawlessly. That means it's the players fault then...

  • HT2129 Having problem with playing DVD on Superdrive

    Having problem playing DVD on my MacBook Pro, (like info DVD from comanies..etc,), it keep ejecting after trying to run, some time if I keep inserting it back it does play, but lately that's not happening, any advise...? is it my Superdrive, software, how to resolve it..? I am now in Iraq and no Apple store in sight..

    pavilion_alex wrote:
    phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
    download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
     ...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
    Message Edited by garnett on 26-Oct-2009 12:49 PM

Maybe you are looking for

  • I cant receive mail on any device

    all of a sudden my email address wont receive any emails, when i try to send email from another email address i get a delivery notification sayinf delivery has failed and the reason is "over quota"

  • G3 B/W 400 MHz Refuses to Boot

    I've tried absolutely everything, but I always get the Mac face and a question mark. I did succeed once in booting a hard drive, but the Linux installation was corrupt. I've tried booting off of multiple CDs and that doesn't work either. I think my b

  • PO Number field disappears in transaction Display PO

    Hi SAP Gurus, I am faced with a problem in our system that when I try to display a purchase order using ME23N, the PO number does not appear in the screen. But during creation this is present. Has anyone encountered this? Thanks, Jograd

  • FT Legal control license locked status

    When creating legal control licenses using VX01N the license type is configured with certain items to check such as ECCN number, customer number or destination country. Within those records is a status that shows a lock. The lock is either unlocked m

  • How to print the list of bookmarks

    I would like to print my list of bookmarks.