Problem with printing only 1 copy from the console on an HP photosmart 7760.

When printing 4X6 borderless copies from a memory stick at the console the first picture correctly prints 1 copy but subsequent pictures show they are printing 1 of 2 copies. No matter how I set the number of copies this problem persists.
I have tried to set the number of copies directly and also to the default setting. Neither works after the first picture.
Any suggestions?
**bleep**

Hello there! Welcome to the forums @UHBCDDP,
I read about the printer issue you're having with it randomly printing out pages.
I am really unsure of what could be causing the problem for sure, however, I have an idea that it could be related to the alignment of the unit itself. The steps I have are below and I'd suggest giving them a try to see if it helps!
Try the steps from here: A 'Cartridge Problem,' 'Cartridge Failed,' or 'Incompatible Cartridge' Error Message Displays on the...
I hope that helps! You can also try power resetting the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Thank you for visiting and posting in the community, I hope you have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

Please help : How to print a matrix from the console...

Hi..
Please help:
How to print a matrix on the console , but i want to take all the input from the console.. like...
if the matrix is of size...
mxn
where
m : row
n : column
and the all the elements of the matrix from the console it self... .
Please help...

Thanks...
I am able to print the elements of the array but i am not able to assign those values to the array ....
How to do that...
I just did a little change in my code...
import java.util.Scanner;
public class CreatingAMatrix {
    public static void main(String[] args) {
     // TODO Auto-generated method stub
     System.out.print("Enter the number of rows: ");
     Scanner scanner1 = new Scanner(System.in);
     int m = scanner1.nextInt();
     System.out.print("Enter the number of coulmns:");
     Scanner scanner2 = new Scanner(System.in);
     int n = scanner2.nextInt();
     System.out.println("The size of the matrix is : " +m+" x "+n );
     int[][] a = new int[100][100];
     for(int i=0;i<=m;i++)
         for(int j =0; j <= n; j++)
          Scanner scanner3 = new Scanner(System.in);
          int o = scanner3.nextInt();
         System.out.println();
     for(int i=0;i<=m;i++)
         for(int j =0; j <= n; j++)
          System.out.print(a[i][j] + "\t");
         System.out.println();
}I am getting an output as this
output:
Enter the number of rows: 2
Enter the number of coulmns:1
The size of the matrix is : 2 x 1
1
2
1
2
3
5
0     0
0     0
0     0
how should i assig those input values to my array..
Please help

Troubleshooting problems with printing PDF's from Revit and Cad files

I am unable to print a readable pdf from AutoCad and Revit. Any Suggestions? I do not have problems with Microsoft or Adobe products..Just AutoCad. I have already spoken with my AutoCad dealer and they concluded it was an Adobe issue.

How was the PDF file created? With the Adobe plug-in to AutoCAD?
If you can provide some samples, we could look at the files and determine the problem. And FWIW, I doubt that your AutoCAD dealer has the competence to conclude where the problem is with a PDF file.
- Dov

Text problems with printing to PDF from AutoCAD 2011

When we print to PDF from AutoCAD, the text in the PDF looks wrong/bad. It takes on a jagged appearance and doesn't look anything like what the font is supposed to look like. Any suggestions?

Yup. It's not that it won't do it, it is just limited to 129". Thanks for the thought. When you print in Acrobat you can see the document size and the page size the program is assuming below the print window. The properties have been set, document adjusted, page size customized. It works exactly as it's designed (according to Adobe help, their knowledge base, etc) but only up to 129". Can do it at any size, decminal, etc. up to and including 129 inches. Prints beautiful, doesn't get chopped no issues at all. Just hits a wall at 129". Been doing it with blueprints for years. Just never needed it this big. In my case it's not a printer/plotter limitation. It's the Adobe PDF printer which is advertised to be able to cusomize page size to 15,000 inches.
Tried customizing in post script, no luck there either.
Again, I very much appreciate the suggestions....
S.

Problem with "Capture Server Model from the Database"

I've installed Oracle-Developer-Suite 10g and Designer 9.0.4.5.6. The repository databse is Oracle 10g and the application database is Oracle 9i (about 700 tables for the application). After I started the Designer Editor, I got the follwoing message:
"No network notification service has been configured for this Repository instance. A desktop-only notification has been started."
What does it mean? What's wrong with the configuration? How can I avoid this problem?
Then I tried to "Capture Server Model from the Database". It took hours to read the data from the database. After reading the data, the following message occurs:
"138 overlaps could not be eliminated by AutoLayout as there is insufficient room to layout the items. Select a large area and retry"
I can not save the uncommited data into the repository.

1. Designer 9i was made to capture 9i DB functionality. So no it will not capture full 11 DB functionality.
2. Yes I have had some problems capturing from an 11DB and have written a bug on it.
Bug.7138247 (74) CANNOT DESIGN CAPTURE A TIMESTAMP(6) FROM 11G DB:
this is fixed in Designer 10.1.2.5

Problem with printing after migrating from 3.5 to 4.1

Hello everyone,
I'm currently working on an application that was recently migrated (by someone else) from Flex 3.5 to Flex 4.1 and I discovered the printing doesn't work properly anymore. So I tried to find out what the problem was and after many tries, I came to the conclusion that the problem was within the following line:
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
(Of course "myPrintView" is not the real name used in the app but that's not important)
I searched on the Internet and this line is supposed to work in 4.1, isn't it? However, the printed version cuts my PrintAdvancedDataGrid approximately in half. I tried to change the width property from myPrintView but the grid is still cut at the same place, its cells are just distorted.
FYI, you can find a part of the code right here:
var printJob:FlexPrintJob = new FlexPrintJob();
                    if (printJob.start()) {
     //A lot of code to build the print view
myPrintView.width=1280;
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
printJob.send();
myPanel.removeChild(myPrintView);
Any help would be appreciated.
Regards,
Gudril

While looking for a solution on the Internet I found some people having troubles because of the structure of their AdvancedDataGrid. My problem doesn't come from any example I've seen but maybe it's still linked to that, so here's an AdvancedDataGrid that's being printed in my app:
                                                <mx:PrintAdvancedDataGrid dataProvider="{dataRayon}" sortExpertMode="true" id="dataGridRayon" width="100%" itemClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" itemDoubleClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" creationComplete="resizeGridRayon();" >
                                                  <mx:columns>
                                                            <mx:AdvancedDataGridColumn id="rownumRayon" width="25" sortable="false" labelFunction="getRowNumRayon" fontWeight="bold"/>
                                                            <mx:AdvancedDataGridColumn id="rayonCoRgrp" textAlign="center" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'CODE')}" dataField="co_rgrp_produits" />
                                                            <mx:AdvancedDataGridColumn textAlign="left" width="240" headerText="{resourceManager.getString('rentabilitePanel', 'SOUS_SECTEURS')}" dataField="libelle" id="hTDataGridRayon" />
                                                            <mx:AdvancedDataGridColumn id="rayonMeVenteHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MONTANT_VENTE_HT')}" dataField="meVenteHt" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'meVenteHt');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonMargeAvtDem" textAlign="right" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_AVT_DEM')}" dataField="margeAvtDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDem');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPMargeAvtDem" textAlign="right" width="80" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_AVT_DEM')}" dataField="margeAvtDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDemP');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonDemarqueHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'DEMARQUE_HT')}" dataField="demarque" formatter="{currencyFormatterFloat1Dec}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarque');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPDemarqueHt" textAlign="right" width="85" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_DEMARQUE_HT')}" dataField="demarqueP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarqueP');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonMargeAprDem" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_APR_DEM')}" dataField="margeAprDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDem');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPMargeAprDem" textAlign="right" width="115" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_APR_DEM')}" dataField="margeAprDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDemP');}}" />
                                                  </mx:columns>
                                        </mx:PrintAdvancedDataGrid>
I also realised I wasn't very clear on the outcome of my doPrint() function. When I said the grid was cut in half, I was talking about half the columns not showing on the printed version, not half the rows. Actually even a column being cut in half. I hope these precisions made my problem a bit clearer and somebody will be able to help me in any way (even just hints).
Thanks for your help.
Regards,
Gudril

Help with printing hard copy from Acrobat PDF

Copy created in InDesign and printed to Adobe PDF is OK on screen but printing hard copy with random chunks of text missing. Same on both my printers, doesn't happen with doPDF. Any ideas? Thanks

I suspect that what you are asking is simply to print to a new PDF with print as image selected. You can also save as an image file and then open the images as a new PDF.

[Solved ]Problems with a programs started from a console app

Ok, i'm using Midnight Commander like my file manager. It runs well, but i have a problem:
When i run first urxvt and then MC, i can open any file and close MC after this, and the file is still open in its respective app. But if i run MC directly from a menu or Run dialog with: urxvt -e mc and i open a file, when i close MC, the file is closed too.
How can i avoid this? I really want to can close MC without close the files that i have opened. In my Fluxbox's menu i putted an entry for MC with that command, is it the correct command for this?
Thank you!
Last edited by superchango (2012-06-29 18:07:54)

See if adding -hold to the urxvt command helps
man urxvt wrote: -hold|+hold
Turn on/off hold window after exit support. If enabled, urxvt will not immediately destroy its window when the program
executed within it exits. Instead, it will wait till it is being killed or closed by the user; resource hold.

I do have some problem with downloading an app from the store, when i try to add, a box appears and says safari can not open the page because the address is invalid, i have no idea why this occurs, and any tip on how to get rid off the restriction code m

i need some one to help me because i cant get ana app to download it says it will be downloaded when u login to your account but in already loged on

You don't download apps from the iTunes app store with Safari.

Problem with executing work item from the inbox

Hello All,
I'm able to send mails from R/3 to Outlook along with the attachment to execute the work item directly from the outlook.
However upon clicking the Exectute work Item.sap file I get an sap gui popup with the description " Not all data for SAP GUI shortcut is available. System description and GUI start parameter are unknown. Entering the missing data."
Clicking on the OK button, leads to another window for SAP logon details. After I chose the right system and on Clicking OK, it opens up the logon prompt. Entering the logo info opens up the work item correctly.
We are on ECC 5.0 with SAP GUI 640 patch level 18 on it. Any suggestions about what am I missing to directly jump into an sap screen provided a session already is open in SAP.
Thanks and Regards
Uday

Hello Uday,
Sounds like something is wrong in the SAPLogon <i>on the client PC</i>. The system sends out a shortcut, and when it's opened it does not relate to a unique entry in the saplogon. Either it's called differently or you have two entries for the same system with different parameters.
Hope that helps,
Mike

Problem with printing adobe docs from firefox

Using Firefox 20.0.1, Windows 8, Firefox brouser. When printing a four page adobe doc three pages print blank, except for the last page.

hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox > options > applications & scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

IPad Mini with iMovie ap. Hooked up iPad to my Windows via USB in an attempt, through iTunes, to copy some QuickTime video files from my PC to my iPad. As I followed the instructions, it seemed I can only copy from the iPad to my PC and not vice versa.

Using iTunes on my PC, I wish to transfer some video files from PC to iPad mini. Can this be accomplished?

Hello there, FlatusMaximas.
Here is a great Knowledge Base article that should show you how to do just that:
iMovie for iOS (iPad): Transfer video and photos from your computer to your devices
http://support.apple.com/kb/PH3243
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Problems with iTunes library copied from Mac

I copied my iTunes from my Mac, and authorized the Windows 7 iTunes to be one of my legal computer.   Some songs wouldn't copy because Windows could not handle the file name or path, but most did.
But iTunes can't find the songs.    When I double click the the songs within iTunes\iTunesMedia\Music, they play, and my iTunes shows one broken link and the new link, which apparently is in the right place.
How do I change things so that iTunes is looking the right place?

I was having the same problem and I knew there had to be an easy answer. I knew it for sure when I saw your topic unanswered. Just right click, or control click on the bar where it says name, album, genre, etc. and select "track number," this will give you the option to put them in their original order.
You can also access this under "view options" in the view pull down menu.
emac, mini, QS G4, ibook, etc. Mac OS X (10.4.7)

Problem with printing only 1 copy from the console on an HP photosmart 7760.

Similar Messages

Maybe you are looking for