Problem with Quicktime stops Preview in Photoshop? Mac OSX 10.6.8

There were no warnings about Lion blocking old software when I installed Lion. Because purchasing new software was beyond my budget,
I had it removed and went back to Leopard 10.6.8. Now when I'm working in Photoshop and have adjusted an image, a message appears "Because of a problem with Quicktime, a preview can't be built. Quicktime Player 10 is in the Applications folder, and Quicktime Play 7 is in the Utilities folder.
Quicktime movies in Support on the Apple site won't play either. Please advise steps to take or new download.
Thanks!
Mcart

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Similar Messages

HT1338 problems with time machine and parallels desktop, mac osx mountain lion 10.8

have a good day, i have been problems with time machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
i am waiting for your help.
thanks.
Jesus.

Take a look here:
http://pondini.org/TM/Troubleshooting.html
Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

Install Problem with Quicktime 7.6.4 in Mac OS X 10.4.11

Dear All,
After downloading the software update for Quicktime (v7.6.4), I wanted to install it to my Macinthosh HD. After the files are copied, the installation wizard said that I need to install Quicktime 7.6.4 again.
iTunes is also updated to version 9 at the same moment, but now I can not open iTunes because it needs Quicktime 7.6.4.
I hope someone can help me, I look forward too hear from you soon!
(Ask for screenshots (in Dutch)).

Restarted the computer?

STILL no real answer to problems with QuickTime and Flash Player

The reply to Problems with QuickTime really didn't answer or solve the basic problem. Some sites to work at all require you to have working Flash Player 8 so when I try to use these sites I get the QuickTime logo with a question mark and then nothing. For all you experts on Apple and Mac; what is going on? Apple is the parent of QuickTime and I assume they want their customers happy with their work. So why is it so hard for these apparently small updates to their programs causing entire sites being blocked off? I have OS x 10.3.9 on a G4 iMac 855mHrz .... It seems that even though we, the customer by default become Apples program testers;the actual programers are never given the go ahead to actualy look at these problem posts. Has anyone ever gotten a solution for a problem they posted here from one of the programmers of the product? It would be nice to know we aren't left to our own devices when it comes to program gliches from the source. If the powers that be in apple are watching and willing to help; any time now is a good time to just but in on the conversation and help solve some of the problems us little people keep on running into.--------------
While online I run into sites that will NOT work without Flash Player 8 (which costs over $150.00) which is told to the viewer with a QuickTime logo with a question mark in it.
This leads the web surfer to try to upgrade or at least investigate Flash Player in their computer and it's version.When said web surfer looks at Flash player upgrade for bucks and the fact that in some way it is tied to QuickTime, web surfer gets real curious. Do the web masters for those sites know that their site is now blocked off? If any major portion ( say 30 or 40 % ) of the web surfing crowd is required to purchase an upgrade to Flash Player even though it doesn't look like Apple is the parent of said Flash Player; those web masters are going to be upset with Apple. Their income is tied to actuall access and browsing of a site, even if it is only to actually just get the Home page. With no access to the site due to no Flash Player 8, the web master is going to find those all important Hits going down to nil. -------
This post is way to broad for any one answer so I don't really expect one. But for you people who have run into similar problems with other programs and sites; I would love to hear if you got any help from other web surfers or from the parent people of those programs and/or sites. I know that my isp earthlink has helped out with problems faster than other groups involved. Anyway.. Any help or comment on this post ( or gripe if you prefer ) would be greatly appreciated. Thank you.

Sorry, but you are completely misinformed. Flash Player 8 doesn't cost one red cent; it's only the Flash creation package that you have to pay for. You can download the free Flash Player 8 here.
QuickTime can natively handle some Flash content, which is why with the lack of the Flash player the browser defaults to the QT plugin. But Flash 8 is a relatively new format from Macromedia and I'm not sure QT supports it yet. Install the Flash 8 player and things should work just fine.
And just FYI, for questions about the Mac version of QuickTime, you'll be better off asking them in the QuickTime for Mac forum.

Problem with Xsan 2.1.1 and Mac Os server 10.5.6

Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.

My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

Problem with QuickTime Movies From iMovie HD

I posted this earlier (on the second day of Leopard's Release), and did not get much feedback, and so thought I'd try again after people have had time to run Leopard.
I have some movies that I created using iMovie HD. I have the QuickTime version of the movie for use with Front Row.
On my G5 iMac running Leopard, the quality of the movies on Front Row is fine. However, in Leopard, the quality is lousy. The movies were made from still photos, using the Ken Burns effect. There are also transitions. On the web, on my iWeb site, the pictures take a while to come into focus. I sort of expect this on the web. However, I've found the same thing with the movie files using Front Row on Leopard. Again, this slowness in coming into focus does not appear when playing the movie on Front Row on Tiger on a G5 iMac.
Curious if anyone else has encountered problems/issues with QuickTime movies files from iMovie HD. And if so, what if any fixes are available.
Thanks in advance.
Russell

Hmmmm, so it works OK in Front Row but NOT in Quicktime player? Thats odd. Front Row works worse for me!
It sounds like it may be a rendering problem with Quicktime - It has to process the file in general (or parts of the file, for example, if you export 10 pics looped in Flash, it has to process the 10 image files each time it plays it through, resulting in the first 4 or 5 images to shoot out jerkily [read LAG] unlike the rest of the movie, which is smooth). If these images in your movie are large in file size or contain tons of wacky photoshopped effects, etc, that might be whats causing the problem.
I'd check everything is updated to the latest version, repair permissions on the disk in Disk Utility, and then see if anythings improved.
Hope this helps you.

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

I've a problem with QuickTime controlbar when I use transparent wmode

Hello All,
I've a problem with QuickTime controlbar. When I use this code :
<object height="592" width="690" codebase="http://www.apple.com/qtactivex/qtplugin.cab#version=6,0,2,0" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B">
<param value="http://streamer.podcast.ulg.ac.be/reflexions/scienceensamusant/doccafe/D ocHorlogesBis.mov" name="src">
<param value="true" name="autoplay">
<param value="true" name="controller">
<param value="true" name="kioskmode">
<param value="true" name="loop">
<param value="video/quicktime" name="type">
<param value="transparent" name="wmode">
<embed height="592" width="690" type="video/quicktime" loop="true" kioskmode="true" controller="true" autoplay="true" pluginspage="http://www.apple.com/quicktime/download/" src="http://streamer.podcast.ulg.ac.be/reflexions/scienceensamusant/doccafe/Doc HorlogesBis.mov">
</object>
with transparent wmode, the controlbar don't print correcty on IE7/IE8.
If I use this code without wmode='transparent', It work but my css menu doesn't work.
Anybody can help me ? Thank in advance.
JP

Hello,
The suggestion made by Golubkov is correct. Make sure that you have configured the CAN objects to correspond to the Ports- for instance, Port1 to CAN0 and Port 2 to CAN1.
If this dosen't fix the problem, let us know what the error message clearly states ( can be found out by clicking on the details tab).

Problems With Quicktime content from Apple website

Hi
I have problems visualizing various sections of the Apple website that contains quicktime content. (Safari thinks Quicktime is not installed)
for example can't see shuffle giuded tour
http://www.apple.com/ipodshuffle/guidedtour/tour/large.html
or the video for the iphone os 3.0
http://events.apple.com.edgesuite.net/0903lajkszg/event/index.html
from the safari error console i can see there are runtime javascript errors on calls to
'AC.Detector', whose result is non an object, as you can see here
http://i40.tinypic.com/1jb1qc.jpg
http://i42.tinypic.com/15ejrb9.jpg
Any idea?
Thanks
PS: i have no problems with quicktime from other websites, or from other parts of
Apple.

i don't know
it could be an issue with something else, maybe iTunes
look here
http://discussions.apple.com/thread.jspa?messageID=8689671&#8689671
same issue with 'AC.Detector' (I don't know what that is)
i have not had problems with Apple quicktime content in the recent past (same Safari 4 Beta)
i installed iTunes 8.1 recently

Problems with Quicktime (Q?) in browser

I am having a problem with Quicktime working in my browser (we use Firefox). Quicktime is up to date, but everything in the browser that should be running just comes up as a Q with a question mark in the middle. I have checked the browser settings and everything seems fine. Any ideas?
whoops, just caught the other topic with the same problem....no answers there yet though...we did update our flashplayer and still no help.

Go to QT settings>Browser>Mime settings>Miscellaneous-Miscellaneous file formats and uncheck Flash media.
This has been going on for years and Apple computer refuses to correct the problem. It is beyond belief that Apple continues with this, but they can't market computers to the general public either. They send me e-mails to test their products and software that they want to test on a windows computer. I will consider doing it, but can't, with the Flash screw up going on...

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

Big problems with installion Premiere Elements und Photoshop Elements 12

Big problems with installion Premiere Elements und Photoshop Elements 12 auf Windows 7, shared technologies not found. Tried all tips and notes from the community (6 hours work), nothing helped./
Habe Riesenprobleme mit Installation Premiere elements und PS elements 12, gemeinsam genutzte Technologien werden nicht installier, habe alle Hinweise aus den Foren bereits probiert (6 Stunden Arbeit). Wer weiß wirklichRat?

Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?product=premiere-elements

Hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

Have a look at some of the suggestions in this link:
http://support.apple.com/kb/TS2570?viewlocale=en_US&locale=en_US (Russian is available from the link within the article (top right of the page).

Lots of problems with Quicktime 7.1.3

There is a lot of problems with Quicktime 7.1.3, for starters when you install it, the shorcuts on the start menu doesn't show the right icon, instead they show the icon like if the path to the desired icon is wrong, and not matter how much you use the repair function on the installer it remains the same.
The plug-in for the internet browser doesn't works neither, you only get the "Plug-in error. The plug-in did not initialise properly" error message.
And what's with the Question mark on every single trailer on this site? it seems they have problems with the mov files on the server or something, like if they aren't complete, kinda odd considering that the HD trailers did open without problem but those ones open a player window since they are too big for a plug-in browser window.
Apple has a lot of work to do for the next version of Quicktime since this one came with a big load of errors, I had to return to the version 7.1 while all this problems get fixed.

from day one i haven't had a problem with installation nor with playback. originally the surround sound didn't work, that was fixed...now however with the recent version the h.264 encoding has downgraded.
the only thing i did different on installation was getting the standalone and not the itunes addition. i didn't uninstall the old one nor did i dig through the registry and mess with the keys. all i did was install and i presume it removed the older installation which is fine because obviously it worked.
why you all are having problems i have no idea. i just want my h.264 encoding quality restored back to the way it was.

Problem with Quicktime stops Preview in Photoshop? Mac OSX 10.6.8

Similar Messages

Maybe you are looking for