Problem with Reader
Help.
I have 2 docs, created by Adobe Presenter, and I can only read one of them. The other just clocks while displaying "Adobe Presenter". But this is not the case for everyone. It works for some, not for others.
What is the variable? Missing software, a setting in the presenter doc when built? Setting by laptop?
Help??
Appreciate all responses.
Laurie
This is the Adobe Reader forum.
If you have a problem with Presenter, try the forum at http://forums.adobe.com/community/adobeconnect/connectpro_presenter or contact Adobe Customer Support.
Similar Messages
-
Problem with READ Statement in the field routine of the Transformation
Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif. -
Having problem with reading list in safari
i am having problem with reading list in safari some time it work sometimes gets hang....
Might be a cache issue ...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
I am facing a Problem with reading images from database
Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from databaseI agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng -
Problem with reading config file
Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
AndrewThanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance. -
Problem with Reader file when we try to save a pdf version of filled in file.
We currently create fillable forms in Acrobat XI and enable them for fill-in with Acrobat Reader. Our end users are able to key information and save it to the enabled pdf file with Reader, but they want to create a protected version of the form so nothing can be modified once they have approved it. They have been creating "locked" pdf versions of the completed form using CutePdf software. The PDF files they are creating open fine with Acrobat Pro XI or our free FoxIT reader, but when we try to open the files they created with CutePDF with Acrobat Reader, they are quite distorted. According to users, this worked with older versions of Acrobat Reader. Please let us know if you have any suggestions (other than switching from Acrobat Reader to the free FoxIT reader.
Thanks for the help!!
Ken K. - 2191Can't endorse FoxIt or CutePDF, since I don't use either of them, and Adobe doesn't like us endorsing thrid party products in their forums anyway. On top of that I know several people who had really bad adware experiences with FoxIt, so I'd say stay away from it.
Most likely neither of these software developers has updated THIER software to work with Acrobat/Reader XI and the problem lies with them, since PDF is an Adobe format and they must follow the lead from here, not vice-versa. -
Booklet printing problems with Reader XI (version 11.0.06)
I created an 80 page 5.5" x 8.5" booklet using Word 2011 running under OSX 10.9.2 on a new 27" iMac. I then "printed" it to a PDF file. I then opened the PDF file in Reader XI and attempted to print it out using the "booklet" option as described at
http://helpx.adobe.com/acrobat/kb/print-booklets-acrobat-reader.html#main1_Reader_and_Acro bat_X .
I planned to manually duplex the booklet booklet since my HP Color Laserjet CP1518ni printer does not have automatic duplexing. The first sign that something was wrong came when I selected "Back side only" from the Booklet Subset pop-up menu. The numbers in the Sheets from boxes showed "Sheets from 1 to 10" when I obviously needed 20 sheets to print the booklet. Repeated attempts to manually change it to "Sheets from 1 to 20" failed. Each time I changed "10" to "20", it would flip back to "10" when I clicked the "Print" button.
I set the Booklet Subset to print only the even pages and checked the "Reverse" box as I have done to successfuly print thousands of manually duplexed pages before.
The printer only printed ten sheets. The first sheet (what should be the booklet's centerfold) had page 40 on the left side as it should, but 42 on the right (it should have been 41). The last of the ten sheets printed had page 4 on the left side (instead of the expected 2) and 78 on the right side (instead of the expected 79). Even though these were obviously messed up, I went on to print the front side of these sheets, selecting "normal". It printed Page 1 on the right side as expected, but printed page 79 (instead of the correct page 80) on the left.
Folding the ten sheets into a booklet revealed the really bizarre nature of the printing snafu. Page 1 was, as expected, on the front. Turning the first page open revealed pages 4 and 5. Turning the second page revealed Pabes 8 (left) and 9 (right). This pattern continued, printing two pages, then skipping two pages, right into the centerfold pages 40 (left) and 42 (right). The first page turn after the centerfold revealed pages 43 (left) and 46 (right). The next revealed 47 (left) and 50 (right).
I am at a complete loss of how to determine where the printing process went afoul. Printing the PDF file normally (one page per sheet one-sided) resulted in all pages being printed normally.
The really frustrating part of this entire experience is that I could find no place to report this "bug" to Adobe. If anyone can help me solve this printing dilemma, or put me in touch with someone at Adobe who could help, it would be greatly appreciated.
The booklet is due at the printer's tomorrow and the inability to print a proof is a real pain. Hope the printer can print this file as a booklet. I would be happy to send this file (125 Mb) to anyone who might help.I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.
-
ALV GRID Problem with reading contents
Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
'zbc_dan_registry' has 2 columns: name, value.
zbc_dan_category' has 1 column: category.
Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
name, category, value.
My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
Here's my code so far:
*& Report ZBC400_DAN_TESTNO4
REPORT ZBC400_DAN_TESTNO4.
DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
ls_category TYPE zbc_dan_category, "Struktur Kategorie
ok_code LIKE sy-ucomm,
container_r TYPE REF TO cl_gui_custom_container,
grid_r TYPE REF TO cl_gui_alv_grid,
gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
fieldcat_r TYPE lvc_t_fcat,
layout_r TYPE lvc_s_layo,
lt_ddval TYPE lvc_t_drop,
ls_ddval TYPE lvc_s_drop,
c TYPE i.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA g_verifier TYPE REF TO lcl_event_receiver.
DATA: BEGIN OF gt_outtab OCCURS 0.
INCLUDE STRUCTURE zbc_dan_regstrz.
DATA: celltab TYPE lvc_t_styl.
DATA: END OF gt_outtab.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
TYPES: BEGIN OF lt_registrz_key. "Struktur mit den Schlüsseln der Tabelle 'Registry'
TYPES: name TYPE zbc_dan_name,
value TYPE zbc_dan_value,
category TYPE zbc_dan_cat.
TYPES: END OF lt_registrz_key.
TYPES: ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
METHODS: refresh_delta_tables.
METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
* METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
* METHODS: refresh_delta_tables.
PRIVATE SECTION.
DATA: inserted_rows TYPE ls_registrz_keys.
DATA: error_in_data TYPE c.
METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
DATA: ls_good TYPE lvc_s_modi,
ls_new TYPE lvc_s_moce.
error_in_data = space.
IF error_in_data = 'X'.
CALL METHOD er_data_changed->display_protocol.
ENDIF.
ENDMETHOD.
METHOD get_cell_values.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'NAME'
IMPORTING e_value = key-name.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
IMPORTING e_value = key-value.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
IMPORTING e_value = key-category.
ENDMETHOD.
METHOD get_inserted_rows.
inserted_rows = me->inserted_rows.
ENDMETHOD.
METHOD refresh_delta_tables.
clear me->inserted_rows[].
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SELECT client name value
INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
CALL SCREEN 0100.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
SET SCREEN 0.
MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'DYNPRO100'.
SET TITLEBAR 'D0100'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
*----Creating ALV Grid instance
CREATE OBJECT grid_r
EXPORTING
i_parent = container_r
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
CREATE OBJECT g_verifier.
SET HANDLER g_verifier->handle_data_changed FOR grid_r.
*----Preparing field catalog.
PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
CALL METHOD grid_r->set_table_for_first_display
EXPORTING
* I_BUFFER_ACTIVE =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
is_layout = layout_r
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
CHANGING
it_outtab = lt_registrz[]
it_fieldcatalog = fieldcat_r
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ELSE.
CALL METHOD grid_r->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ENDIF.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZBC_DAN_REGSTR2'
CHANGING
ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'NAME'.
ls_fcat-coltext = 'Name'.
ls_fcat-outputlen = '40'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'VALUE'.
ls_fcat-coltext = 'Wert'.
ls_fcat-outputlen = '30'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'CATEGORY'.
LOOP AT lt_category into ls_category.
ls_ddval-handle = 1.
ls_ddval-value = ls_category-category.
* ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_ddval TO lt_ddval.
ENDLOOP.
CALL METHOD grid_r->set_drop_down_table
EXPORTING it_drop_down = lt_ddval.
ls_fcat-edit = 'X'.
ls_fcat-drdn_hndl = '1'.
ls_fcat-coltext = 'Kategorie'.
MODIFY pt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
ps_layout-smalltitle = 'X'.
ENDFORM.
FORM save_data.
DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
ls_ins_key TYPE g_verifier->lt_registrz_key,
ls_registrz TYPE zbc_dan_regstrz,
ls_outtab LIKE LINE OF gt_outtab,
lt_instab TYPE TABLE OF zbc_dan_regstrz.
CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
LOOP AT ls_ins_keys INTO ls_ins_key.
READ TABLE gt_outtab INTO ls_outtab
WITH KEY name = ls_ins_key-name
value = ls_ins_key-value
category = ls_ins_key-category.
IF sy-subrc = 0.
MOVE-CORRESPONDING ls_outtab TO ls_registrz.
APPEND ls_registrz TO lt_instab.
ENDIF.
ENDLOOP.
INSERT zbc_dan_regstrz FROM TABLE lt_instab.
CALL METHOD g_verifier->refresh_delta_tables.
ENDFORM.Hi Hans,
You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
Please close the question here.
Warm Regards,
Vijay -
We have a problem with unusual font displayed for a PDF file created on a Mac with Microsoft
Office. It displays properly on Windows with Adobe Reader 9.3 and on Linux (Fedora 12 and
Red Hat Enterprise Linux 5.4) with kpdf and evince. However, on both Fedora 12
and RHEL 5.4 with Reader 9.3, the fonts used are different from what is expected.
Is there a known issue with fonts in Reader 9.3?We have a problem with unusual font displayed for a PDF file created on a Mac with Microsoft
Office. It displays properly on Windows with Adobe Reader 9.3 and on Linux (Fedora 12 and
Red Hat Enterprise Linux 5.4) with kpdf and evince. However, on both Fedora 12
and RHEL 5.4 with Reader 9.3, the fonts used are different from what is expected.
Is there a known issue with fonts in Reader 9.3? -
Problem with reading PNG metadata due to unicode strings
Being new to the XMP SDK I have problems trying to dump the XMP data from a .png file because the data contains UTF-8 data.
I have searched the forum for answers, but the answers I found do not help.
The answer I found was to replace std::string with std::wstring. but that causes problems with the compile - btw, I am using MSVC 2010 C++ Express
and XMP SDK-CC201306
Changing the std:: line to:
#define TXMP_STRING_TYPE std::wstring
and all string definitions in my code to wstring, gives me a bunch of compile errors, such as:
f:\pkg\c++\xmp-toolkit-sdk-cc201306\public\include\client-glue/TXMPMeta.incl_cpp(74): error C2664: 'std::basic_string<_Elem,_Traits,_Ax> &std::basic_string<_Elem,_Traits,_Ax>::assign(const _Elem *,unsigned int)' : cannot convert parameter 1 from 'XMP_StringPtr' to 'const wchar_t *'
1> with
1> [
1> _Elem=wchar_t,
1> _Traits=std::char_traits<wchar_t>,
1> _Ax=std::allocator<wchar_t>
1> ]
1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast
1> f:\pkg\c++\xmp-toolkit-sdk-cc201306\public\include\client-glue/TXMPMeta.incl_cpp(72) : while compiling class template member function 'void TXMPMeta<tStringObj>::SetClientString(void *,XMP_StringPtr,XMP_StringLen)'
1> with
1> [
1> tStringObj=std::wstring
1> ]
1> f:\pkg\c++\XMP-Toolkit-SDK-cc201306\public\include\XMP.incl_cpp(55) : see reference to class template instantiation 'TXMPMeta<tStringObj>' being compiled
1> with
1> [
1> tStringObj=std::wstring
1> ]
Any help or pointers will be most welcome.
TIA,
DayWalkerOK, I now understand the point you were driving at.
To check out this idea, I have modified the code in the routine which dumps the output from the callback to a file as follows:
(Though if you were to dump the file using the std:: stream - .i.e. using the utility as supplied, you should see the same problem - it is not at all dependent on my using the wxWidgets toolkit)
XMP_Status DumpXMPToFile(void * WXUNUSED(refCon), XMP_StringPtr buffer, XMP_StringLen bufferSize )
XMP_Status status = 0;
wxString wsT;
try
wxString wsText( buffer, wxConvUTF8 );
if( g_wfDumpFile.IsOpened() )
wsT.Printf( _T("<%s> size(%d)"), wsText, bufferSize );
g_wfDumpFile.SeekEnd();
g_wfDumpFile.Write( wsT, wsT.Length() );
else
return -1;
catch(XMP_Error & e)
The output for the one line in question:
<Iptc4xmpCore:CiAdrExtadr> size(24)< = "> size(4)<Leo-Saurer-Straße> size(15)<> size(1)<C3> size(2)<> size(1)<9F> size(2)<>> size(1)<e> size(1)<"> size(1)<
> size(1)< > size(3)< > size(3)< > size(3)
The hex contents of the buffer I get in the callback is
0x003908D0 4c 65 6f 2d 53 61 75 72 65 72 2d 53 74 72 61 c3 9f 65 00 cd cd cd cd Leo-Saurer-Straße.ÍÍÍÍ
0x003908E7 cd cd cd cd cd cd cd cd cd fd fd fd fd ab ab ab ab ab ab ab ab ee fe ÍÍÍÍÍÍÍÍÍýýýý««««««««îþ
As you can see, my conversion routines takes all the buffer contains and converts it to the appropriate UTF-8 string, even though the count passed to me is short and represents only the count up to the first non-ASCII character and all of the subsequent strings - interpreted as hex values by the caller of the call back would not give me the correct characters, athough they are passed to me for display.
The two fragments of one byte length are the ones I could not find in the actual output.
The call stack at that point:
>
wxMeta.exe!DumpXMPToFile(void * __formal, const char * buffer, unsigned long bufferSize) Line 110
C++
wxMeta.exe!TextOutputProcWrapper(void * refCon, const char * buffer, unsigned long bufferSize) Line 60 + 0x18 bytes
C++
wxMeta.exe!DumpClearString(const std::basic_string<char,std::char_traits<char>,std::allocator<char> > & value, long (void *, const char *, unsigned long)* outProc, void * refCon) Line 409 + 0x1c bytes
C++
wxMeta.exe!DumpPropertyTree(const XMP_Node * currNode, int indent, unsigned int itemIndex, long (void *, const char *, unsigned long)* outProc, void * refCon) Line 161 + 0x14 bytes
C++
wxMeta.exe!DumpPropertyTree(const XMP_Node * currNode, int indent, unsigned int itemIndex, long (void *, const char *, unsigned long)* outProc, void * refCon) Line 222 + 0x1f bytes
C++
wxMeta.exe!XMPMeta::DumpObject(long (void *, const char *, unsigned long)* outProc, void * refCon) Line 1100 + 0x23 bytes
C++
wxMeta.exe!WXMPMeta_DumpObject_1(__XMPMeta__ * xmpObjRef, long (void *, const char *, unsigned long)* outProc, void * refCon, WXMP_Result * wResult) Line 968
C++
wxMeta.exe!TXMPMeta<std::basic_string<char,std::char_traits<char>,std::allocator<char> > >::DumpObject(long (void *, const char *, unsigned long)* outProc, void * refCon) Line 833 + 0x21 bytes
C++
wxMeta.exe!MyFrame::DisplayMetaData(wxString & wsrFilePathAndName) Line 484
C++
Hoping this will help resolve the issue :-) -
Display and Print Problem with Reader 9.1.x
hallo
an external software produced pdf-documents. all of this pdf´s will work with all reader-versions 7 and 8. but with 9.x we have the problem, that the view is not korrekt. letters are not comlpete. this view will also be printed. this error is not on alle text-lines, but some lines show uncompleted letters. the manufacturer say, that is all standard and it is sure that the reader will have the problem :-) yes surely.
but maybe the reader is the problem. some ideas?
the attch file shows the error. it is a label and in the middel of the label: Tamaris-TREND or with reader 9.x T.......-TREND.
thanks
markustesting and testing and testing
here the newest info
it is not the letter size. small or caps letters.
i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
i´ll go crazy with this sh... :-)
thanks
markus -
Reader 9.3 does not respond or responds very slowly. I tried updating it - no change. I tried downloading it and I get the following message. Error 1316 network error occurred while attempting to read from file C:/users\chuck\AppData\Local\Adobe\Reader9.3\Setupfiles\AdbeRdr930_en_US.msi
I can use reader to open stuff saved on my computer, but it responds slowly or sometimes not at all.I have the same problem.
The problem seems to be that the install application does not extract the file it is trying to read.
During the install, a directory "Setup Files" is created, i.e.:
C:\Documents and Settings\Administrator\Local Settings\Application Data\Adobe\Reader 9.3\Setup Files
Then the install application extracts installation setup files in this directory. Unfortunately, the file "AdbeRdr930_en_US.msi" is not one of them. So later in the install process; when it looks for the file, it gives "Error 1316" because it can't find it.
However, the problem seems to be that the file never was there in the first place.
I have tried this several times now, and opened a file manager (windows explorer) to view this (temporary) directory.
The only files I see there are:
File name
File size
abcpy.ini
2 kb
AcroRead.msi
3,880 kb
Data1.cab
107,103 kb
Setup.exe
338 kb
setup.ini
1 kb
If you cancel the install (give-up) after error; then this directory folder and all the above files are erased.
This is clearly an issue with the install program: "AdbeRdr930_en_US.exe" ... which probably should be renamed, because the (second) setup dialog box is clearly titled "Adobe Reader 9.3.2 - Setup" (not, 9.3.0). In spite of this, the properties for the install file say version is 2.0.0.41. Seems a bit confusing.
Anyway, the main issue is that it can't find the "AdbeRdr930_en_US.msi" file because it does not exist in the "Setup Files" directory because, presumably, the installer was unable to extract it in the first place.
The "Error 1316" appears after the "Validating install" phase of installation and during the "Publishing product information" phase when the green progress bar appears to be at 100%. Frustrating, so close, but yet so far away from success.
Oh, and don't run the "Windows Installer Cleanup Utility" ... this is (was) to resolve problems with Microsoft Office installations, but even there Microsoft has retracted this since it is found to actually cause damage to Microsoft Office. See:
[Wikipedia] Windows Installer CleanUp Utility
[Microsoft] How do I uninstall Office, if I cannot uninstall it from Control Panel?
Hope somebody out there can fix this issue. With luck, someone on the development team is watching this thread...
~~ -
Problems with reading XML files with ISO-8859-1 encoding
Hi!
I try to read a RSS file. The script below works with XML files with UTF-8 encoding but not ISO-8859-1. How to fix so it work with booth?
Here's the code:
import java.io.File;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.net.*;
* @author gustav
public class RSSDocument {
/** Creates a new instance of RSSDocument */
public RSSDocument(String inurl) {
String url = new String(inurl);
try{
DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
Document doc = builder.parse(url);
NodeList nodes = doc.getElementsByTagName("item");
for (int i = 0; i < nodes.getLength(); i++) {
Element element = (Element) nodes.item(i);
NodeList title = element.getElementsByTagName("title");
Element line = (Element) title.item(0);
System.out.println("Title: " + getCharacterDataFromElement(line));
NodeList des = element.getElementsByTagName("description");
line = (Element) des.item(0);
System.out.println("Des: " + getCharacterDataFromElement(line));
} catch (Exception e) {
e.printStackTrace();
public String getCharacterDataFromElement(Element e) {
Node child = e.getFirstChild();
if (child instanceof CharacterData) {
CharacterData cd = (CharacterData) child;
return cd.getData();
return "?";
}And here's the error message:
org.xml.sax.SAXParseException: Teckenkonverteringsfel: "Malformed UTF-8 char -- is an XML encoding declaration missing?" (radnumret kan vara f�r l�gt).
at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at getrss.RSSDocument.<init>(RSSDocument.java:25)
at getrss.Main.main(Main.java:25)I read files from the web, but there is a XML tag
with the encoding attribute in the RSS file.If you are quite sure that you have an encoding attribute set to ISO-8859-1 then I expect that your RSS file has non-ISO-8859-1 character though I thought all bytes -128 to 127 were valid ISO-8859-1 characters!
Many years ago I had a problem with an XML file with invalid characters. I wrote a simple filter (using FilterInputStream) that made sure that all the byes it processed were ASCII. My problem turned out to be characters with value zero which the Microsoft XML parser failed to process. It put the parser in an infinite loop!
In the filter, as each byte is read you could write out the Hex value. That way you should be able to find the offending character(s). -
Problems with "Read" mail becoming "Unread" again
Now that I have upgraded to Mountain Lion, I find my mail app acting odd. When I read an email, or when I select the entire contents of a folder and mark all the mail as "read", within a few minutes, random emails become "unread" again.
Anyone else experiencing this and have you come up with any fixes?
Thanks
Gary CascioMail 2.x has always had these kind of problems with some IMAP servers. A few weeks before releasing the Mac OS X 10.4.7 Update, Apple made some changes to .Mac that caused these issues to happen there as well, and these forums were flooded with complaints from .Mac users about read messages being marked unread, and deleted messages being undeleted.
If this was a non-Mac IMAP account, I would say there is nothing you can do about it other than switching to another mail client. But in you case there has to be something else going on.
Try rebuilding the mailbox, i.e. select it and do Mailbox > Rebuild and see whether that makes a difference. -
Problem with reading objects through ObjectInputStream
HI
Actually i have a problem of reading the objects from ObjectInputStream and getting StreamCorruptedException when i try to read as there is no limit to find the end of file i think iam getting the exception any suggestions please to overcome this problem..Of course I can, I have included two classes.
MyMap that I shall store values in and then save to disk.
Test Map that I stores one value in MyMap and then
serialize to disk and the I do the reverse and se if my value is still there. Check out for yourself and please dont hestate to ask if you have trouble using it.
import java.util.HashMap;
import java.io.Serializable;
* This class must implement Serializable to be stored in disk
* with write(Object)
public class MyMap implements Serializable
private HashMap map = new HashMap();
public void put(Serializable key, Serializable value)
map.put(key,value);
public Object get(Object key)
return map.get(key);
// Second class
import java.io.*;
public class TestMap
public TestMap()
try
showHowToUseSerialize();
catch(Throwable ignored)
ignored.printStackTrace();
private void showHowToUseSerialize()throws Throwable
// First store anything to the class MyMap
MyMap myMap = new MyMap();
// When yuo use put on it it only accept Serializable
// se how in the class
myMap.put("key1","This is the first object in MyMap");
// Then serialize it to disk.
serialize(myMap);
// Now you try to retreive from the file and see if you
// can get the value key1 stored inside it.
Object object = deserialize();
// Cast it to the kind of object you have stored there.
MyMap mapFromDisk = (MyMap)object;
// See if key1 is really there.
String value = (String)mapFromDisk.get("key1");
// Print it out just be sure...
System.out.println("key1 stored in MyMap in disk is: "+value);
private Object deserialize()throws Throwable
File f = new File("C:\\temp\\mymap.ser");
if(!f.exists())
{ // Check that there really is such serialized file.
throw new FileNotFoundException("Didnt find the serialized file: "+f);
FileInputStream in = new FileInputStream(f);
ObjectInputStream objIn = new ObjectInputStream(in);
// Read in the object from the file.
return objIn.readObject();
private void serialize(Object myMap) throws Throwable
File f = new File("C:\\temp\\mymap.ser");
if(!f.exists())
f.createNewFile();
FileOutputStream out = new FileOutputStream(f);
ObjectOutputStream objOut = new ObjectOutputStream(out);
objOut.writeObject(myMap);
objOut.close();
public static void main(String[] args)
new TestMap();
}
Maybe you are looking for
-
I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable. I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal. This via
-
Can't get iPhone 4s calander to sync to iMac
The reminders and notes picked up on Mac. Had two other people set everything on phone, however calander events on phone are still not showing up on calander on Mac. Do see the events when going to ICloud online. What's wrong?
-
Good evening. I have a 2.16 GHz Intel iMac and I use iTunes 7.3.1 (3). I have almost 120 Gb of music so I decided to use my backup HD (external) as the source for the music folder so I can recover some space in the internal HD. So I went to itunes pr
-
Scheduling report in back ground after the previous report is executed
Hi, There is one report which will be executed manually, once that is executed my report should be executed automatically in background. Pls help me in how to do this. Thanks, Lucky
-
Weird tty console problem if I leave X (e g I press ctrl+alt+F1)
Hello, I have a weird problem with my console. When I leave Xorg, by pressing ctrl+alt+F1 for example to get to a console, the console is a horrible mess. It is a working console, but it looks so terrible you cannot recognize a single character. L