Problem with recording

when i record with imovie black shapes flash on the movie screen but when a play its fine

Hey J,
Welcome to the forum!
You must select the tracks you want to record, (that happens as soon as you click on R button), be sure you're on the right input on the I/O, Logic ask you for the record path.
On audio hardware & drivers enabled core audio and select the input you're using on driver ( built-in audio or your audio interface).
Other than that, I don't see any reason for it to happen.
regards,
Jorge

Similar Messages

Problem with recording device

Try to use Echo/Sound test service, as well as a couple friends on the list and get the following message "Problem with recording device". I have also searched in the community, but found many issues releated, but no solutions that fit the problem. Headset: Turtle Beach XP SevenSkype Version: 6.22.81.105Operating System: Windows 7 Ultimate Service Pack 1; 64 - bit Tested in sound recorder, and records my voice, and able to playback and hear my horrible singing. I did find a rather odd way to resolve the issue temporarily. I also use hangouts from time to time, and when I start a video call, it will ring, and send out, and I can then call out using skype to a friend/sound test and it will work fine for the rest of the call. Able to talk, and do whatever. Unfortunatley, with the listed method above I have to repeat the process everytime I want to make a call, or accept someones call. Rather... Annoying. Any solution to this, or what can be causing this issue?

I suggest you download and install the latest generic Realtek audio drivers as they should be compatible with the computer model you listed in a previous post. I run a similar model to that one and have no issues with it. Skype is rather resource intensive on that netbook when participating in video calls due to the limitations of the processor and onboard video chipset. The latest generic Realtek audio drivers (Select "High Definition Audio Codecs" - 32 bit Windows 7)http://www.realtek.com/downloads/okay, i have pretty much given up trying to use Skype on this netbook but i came back to report the known data just in case anyone else might find it useful. to begin with 1) let's get this upfront. i am ignorant, ill-informed, tech-illerate and stupid. i stipulate to this going in. i've NO idea what the hell i'm doing. 2) hardware = ASUS eeePC1005HA, Win7Starter32, 1G DDR2, Intel Atom280, 250GHDD 3) per the above suggestion i went to the RealTek site and looked for the driver, but first 4) i had SlimDriver look around for me and it said there was a newer driver (i think dated 2011) which i had it download & install 5) so that didn't seem to make the slightest difference in Skype performance (i.e. none) so 6)as in (3) above i went to http://152.104.125.41/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false and it offered me 2 choices of sites from which to download Version R2.78 for 32bit Win7 so i picked one at random and it downloaded 2 files, 1 a .exe and the other a PART which i have no idea what the hell that is. i barely know enuf to double clic on the filename in WinExplorer Downloads so that's what i did first on the .exe file cuz that one had a file size greater than zero (unlike the PART file) and got an error message saying Win7 didn't know what to do with this file and could i please suggest a software to use on it. 7) so i deleted it and started over with the same result and then i repeated step 7) only this time i got only the .exe file in my Downloads folder and when i double-clicked it i actually got the Install Wizard to run. 9) so while the Wizard was running i went and looked in my "Windows 7 In Depth" by Cowart & Knittel and found nothing in the index under RealTek so i went and looked at Drivers and based on clues i found there i went to Control Panel ->Hardware & Sound -> Device Manager ->RealTek HD Audio [hidden under expandable Processors - Sound, Video & game conrollers]->(LeftClick to get Update Driver Software), and wait about a year and a half for 'Onliine Search for Software', followed by the message "the best driver software for your device is already installed". 9)so by this time the Install Wizard has finished Uninstalling the previous version of the driver and wants me to RESTART and that's right now in real time so i am now closing this browser and if i ever finish restarting i will continue this response in a new reply window starting with step (10), whatever that turns out to be. the suspense is killing me.

Windows 10 Calls dropped problem with recording device

I now there are others experiencing this issue. Though, however not only when either I call someone or they call me the call drops and "problem with recording device" error message is displayed. It is also stating to those trying to call me or answering my call that I can only accept IMs.Can someone please help as its starting to become a complete waste of my time. I am running Windows 10 and Skype Version: 7.7.0.103

Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)

Skype Problem with recording device

After the windows 10 update it keeps saying "Problem with recording device" my camera works but, my microphone doesn't it worked fine before. The thing I use is a really old camera I don't know if that has anything to do with it.

Due to the age of the camera and lack of support from Creative your options are limited. I would suggest you connect the device directly to a free USB port on your machine. If you share it with several devices on a hub or extension the device can easily work intermittently. That type of issue can cause the audio to fail to be initialized, creating the problem. This can also occur if the audio half or both halves of the camera/cabling is intermittently failing as well. You have the option of switching to the generic Microsoft Video and Audio drivers to see if that helps as well. Below is a graphic on you how to update the drivers to the generic "USB Video Device". You can do the exact same thing for the audio half of the camera by updating it to "USB Audio Device" (which is what you might want to try first in this scenario).

Win 10 Problem with recording device

i upgraded to windows 10 yesterday and i was skyping just fine now i go to call someone and it says problem with recording device its really annoying people call me just fine but cant hear me at all i hear them i checked my mic its fine complete response please help me

Yeah no I'm having a very similar problem. Instead of me calling people or people calling me and my microphone not working. I can't even accept calls or make calls, it just drops the call and says "problem with recording device". But I tested my mic and camera and they are both working, so what's wrong? Why is this ruining my night?

A Problem With Recording: Delay Between Tra

I recently purchased an Audigy 2 ZS Platinum Pro to replace my ailing Audigy 2 Platinum from a few years back. I've been trying to do some home recording (namely with Sony's Acid Pro 5.0) and I've been noticing some delay between tracks when I record.
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I've tried other programs (Audacity and n-Tracks Studio) so I figure it's not something wrong with the program. My computer is new, it's running an Athlon 64 3400+, with over a gig of ram, so I can't imagine it's a problem with my computer.
Anybody have any thoughts or experience with problems like this?

bobweb wrote:
I recently purchased an Audigy 2 ZS Platinum Pro to replace my ailing Audigy 2 Platinum from a few years back. I've been trying to do some home recording (namely with Sony's Acid Pro 5.0) and I've been noticing some delay between tracks when I record.
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I've tried other programs (Audacity and n-Tracks Studio) so I figure it's not something wrong with the program. My computer is new, it's running an Athlon 64 3400+, with over a gig of ram, so I can't imagine it's a problem with my computer.
Anybody have any thoughts or experience with problems like this?
Latency issue.
If you can select ASIO drivers (audio settings) on your software then use it and set latency on ASIO panel to ~ 5 ms.
.jtp

Problem with record count...

Hi,
I try to solve one problem with count. This problem occurs when I getting multi records that I need to count. Take a look on the following query:
SELECT INVOICE,COUNT(INVOICE)
FROM TABLE WHERE ADDR =
(SELECT ADDR FROM TABLE
WHERE DELEVERY = 'DD'
GROUP BY ADDR||POSTDT
HAVING COUNT(DISTINCT ADDR||POSTDT) > 1)
GROUP BY INVOICE;
I expected to see each invoice with total count invoices that have been delivered to the same address and date. But it's give me only invoice and count 1(itself), regardless if two or more invoices have been delivered to the same address and the same date. I think, that I just lost myself in this query. Hopefully I gave enough information.
Thanks in advance,
Alex

Hi Alex,
there are a couple ways to code this. Just two of them:
SELECT t1.INVOICE,
       t2.total
FROM   TABLE t1,
       (SELECT   ADDR,
                 POSTDT,
                 count(*) total
        FROM     TABLE t2
        WHERE    DELEVERY = 'DD'
        GROUP BY ADDR,
                 POSTDT
        HAVING   COUNT(*) > 1
WHERE t1.ADDR   = t2.ADDR
AND    t1.POSTDT = t2.POSTDT
SELECT t1.INVOICE,
       (SELECT   count(*)
        FROM     TABLE t2
        WHERE    DELEVERY = 'DD'
                 t2.ADDR   = t1.ADDR
                 t2.POSTDT = t1.POSTDT
        GROUP BY ADDR,
                 POSTDT
        HAVING   COUNT(*) > 1
       ) total
FROM   TABLE t1

Problems with record button on iPad rMini.

Is anyone having problems activating the Record button in the Camera Video mode. It has a mind of its own. Sometimes I can get it to work, other times it won't activate unless I click out of camera mode and then go back and try again. Of course by then, I've lost the moment I wanted to record.
Also I experience occasional problems in switching from video to camera or vice versa. Actually this usually occurs around the same time I am also experiencing problems with activating the Record button?
Anybody know of a fix besides returning the device to the Apple store for another iPad rMini? Thanks.

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

Problems with recording BT sport

trying to record the MLB on BTSP1
was able to watch apart from 10 mins from the end of the game
Got a message end of programe
Happens on ESPN as well
is this BTsport not telling the TV Guide that the game has been extended .
or do I have to keep recording the following prorames to get the end of the baseball
Can BT Sport sort this out. does not happen when recording SKY sports programes like the NFL it get extened play

Travelusa wrote:
Thanks but does not help
I have a SKY box I cannot change the end of programe
It has to be done by BT Sport at your end to change the end of programe
The link you gave me was for the BT Vision box
Here's how to do it on a sky box that I found using Google http://help.sky.com/tv/problems-with-your-sky-tv/recordings-missing-the-start-or-end
If you found this post helpful, please click on the star on the left
If not, I'll try again

Problem with recording and sound on Pavilion ze1000 series

I have an old Hp Pavilion ze 1250 running Windows XP (sp2) with 1gb Ram.
I'm trying to convert some cassette tapes to digital (with Audacity).
My problem: When I try to record using Audacity, it records about 10 seconds and then hangs. When I click Stop and try to play the 10 seconds back, it freezes and won't play anything. (After that, even if I import an mp3 file to work on, it won't play that either.) It also causes all the sound to go off throughout the computer. Songs will "play" in WMP but there's no sound in the speakers or headphones. (The Microsoft logo music won't play either when I turn the computer off.) I've tried resetting the volume and checking if anything is muted. Nothing .
I restart the computer and everything is fine.....sound works and Audacity plays.....until I try to record again.
I thought that this was only an Audacity problem....until I tried to record 60 seconds through Sound Recorder. The exact thing happens. It records about 10 seconds of audio, then freezes and refuses to playback. All the sound goes off throughout the computer and nothing solves it except Restart.
My sound/audio device is Conexant AC-Link Audio.
The Sound Playback, Sound Recording, Voice Playback, and Voice Recording are all defaulted to HP VIA Audio.
I have updated the audio driver. Recording is enabled. Is there something else I need to do?
Thanks.

Thank you for your reply.
I'll try some of those suggestions and see if that helps.

Major problem with recording videos

hello,i have nokia n95 8gb and i have searched the forum a bit and i didn't find solution the problem i have. When i'm recording video,after 5-7 seconds picture starts to get choppy and it does that like every 1 second for like 0,5 second,i also tried to record video with lower picture quality setting but result remains the same,anyway for the first 5-6 seconds picture is very fine and i can do whatever and the picture doesn't go choppy at any time so i would appreciate some help if anyone have had the same problem.

08-Feb-2008 08:21 PM
only_inder wrote:
it could be a software glitch itself, please try to update the software of the phone.
www.nokia.com/softwareupdate
please take a backup of your phone to the pc or to the memory card, because softwareupdate gonna wipeout every single thing from the phone memory.
br,
I
I have the same problem and I have the latest firmware. So updating won't help. The video-recording "hangs" for about 1 sec for every 2 sec recording. The end-result is NOT very good..

Averaging pmt signal and strange signal shift problem with recording

Hello
I'm a researcher at UCL and am quite new to Labview. I have a PMT and i've successfully created a program to read/show and write the data. From the signal I need the average pk to pk value and the average mean value. Is there any way I tell labview to average the signal out then display it and then write it to the file?
Also, I came across a weird problem. I have split the output signal of the PMT to an oscilloscope and the daq card. When I press record in labview I see a shift in the signal seen on the oscilloscope and labview records that shift. Why is this happening? I'm guessing the circuits of the daq and pmt are not completely isolated so how could I solve this problem?
Any help is really appreciated because I'm quite clueless about what to do next
Thank You
thh

Hello THH,
You could use the probability and statistics pallet found in the functions menu under mathematics, this will contain a mean value function which you could feed your data into. As for writing the data to a file I have attached a simple VI I'm am about to post as a community example that can help you understand how to format text files.
As for the problems you are having with the signal shifting, this could be due to a few reasons. The first is an impedance mis-match between the scope and DAQ card, you can check our website for the specifications of your card. The Second reason could be a ground loop issue, you could solve this using an opto-isolator circuit.
Hope this helps
Kind Regards
Regards
Andrew George @ NI UK
Attachments:
Text File Manipulation.zip ‏23 KB

Problem with recording a live stream

hi,
i implemented an application for recording a live stream. It was working well locally. But now i am connecting with client's communication server. Broadcaster is working well. But the recording portion is not working. It's showing an error "NetStream.Record.NoAccess" . Can anbody help me to avoid this problem? Also now I am not able to connect with local FMS(developer version). When I tried to connect the same application with local FMS, it's showing an error like NetConnection.Connect.InvalidApp and NetConnection.Connect.Closed. Can anybody let me know why this error is showing?
Regards,
Sreelash

I've just played around with the current developer edition of
the flash media 2 server, and had a strange experience.
We are using on our productive server still flash
communication server mx 1.5.3, like i've noticed before, because we
have only a licencse for this version.
If i record a video with our app on flash media 2 server the
problems i've descriped are away...
...BUT...
flash media 2 seems to cut the corrupted part automaticly out
of the record.
I recorded a video which is exactly 30seconds long (made with
a timeout script). On old flashcom the first 7 seconds have these
descriped failures.
If i record the same stream on flash media 2 there are no
failures in the record, but the record is only 23 seconds long....
This is very very bad adobe :(
Or is the problem in my code? If there is anybody who can
help, i would be very happy!

Need help solving a problem with recording

hello im using a korg k49 midi controller with garagband. whenever i record the instrument becomes "poppy" and the sound cuts in and out, almost like little click noises. does anyone know a solution to this problem? help would be appreciated

I have the same problem, except I'm trying to record guitar through a TASCAM US-122.
My theories:
1. Bad TASCAM drivers.
2. Leopard bug.
3. Garageband bug.
Some people suggest that things are better if you turn off your airport.
Rebooting and restarting Garageband can help.
So far, nothing is working for me.

Have problem with recording to MINID

I have Audigy 2 platinum pro. when I try open minidisc program (send music to my minidisc frow optical cabel) the computer shuts dow with the writing that there is problems. and tahts ir allmoust all time.
Thanks
Povilas

Hi Louis,
Thanks for your reply. I saw it from the KVM console.
I had reset the CIMC to factory default configuration.
Thanks very much!

Problem with recording

Similar Messages

Maybe you are looking for