Problem with rendered tables in JHeadstart 10.1.3.3.87

Hi,
We have recently upgraded from Jhs 10.1.3.3.52 to 10.1.3.3.87 (using JDev 10.1.3.4.0.4270) and have run into a problem with a window using regions. We have horizontal region containers, vertical region containers, stacked region containers and detail group regions. The tables in these containers/regions are not rendering at all. When I compared the .jspx pages of both versions of Jhs I noticed the 10.1.3.3.52 version had the following code (which works) as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRowIndexInRange!=-1* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
and the 10.1.3.3.87 version had the following code as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRow!=null* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
the problem seems to be in the following line in the horizontalRegionContainer.vm and stackedRegionContainer.vm -
#JHS_PROP("rendered" $subRegion.rendered)
as in line 33 of the horizontalRegionContainer.vm - <af:panelGroup #REGION_PARTIAL_TRIGGERS($subRegion) *#JHS_PROP("rendered" $subRegion.rendered)* id="#REGION_ID()${subRegion.name}PanelGroup" and
as in line 32 of the stackedRegionContainer.vm - <af:showDetailItem text="#REGION_TITLE($subRegion)" *#JHS_PROP("rendered" $subRegion.rendered)* #JHS_PROP("disabled" $subRegion.disabled) #REGION_PARTIAL_TRIGGERS($subRegion) id="#REGION_ID()${subRegion.name}Tab">
has anyone run into a similar problem?
thanks,
Lana

Thanks Steven!
We appreciate the reply and this solution. Could you, or anyone, point us in the direction of helpful documentation with respect to Velocity Templates. We don't really have as good an understanding as we would like, and most of our customizations are our best guess.
Thanks very much.
MaryB
U of Windsor

Similar Messages

  • Problems with a table in PDF`S footer

    Dear sirs,
    We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
    We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
    another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
    On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
    We have no problems with the table included in the main body
    In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
    May you help us to solve our problem?
    Thanks in advance your help.
    Edited by: emgaitan on Mar 16, 2010 2:18 PM

    Wardell,
    Check the data in RSA3 for the extractor that you use to bring data .
    You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
    Let me know if you need anything else.
    Thanks
    Ravi Thothadri
    [email protected]

  • I am getting problem with internal table & work area declaration.

    I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
    TYPES : BEGIN OF ty_makt,
             matnr TYPE makt-matnr,
             spras TYPE makt-spras,
             maktx TYPE makt-maktx,
             maktg TYPE makt-maktg,
             celltab TYPE lvc_t_styl,
           END OF ty_makt.
    DATA : i_makt TYPE TABLE OF ty_makt.
    DATA : wa_makt TYPE ty_makt .
        But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
    i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

    Hi Nagasankar,
    TYPES : BEGIN OF TY_MATNR,
                  MATNR TYPE MAKT-MATNR,
                  SPRAS TYPE MAKT-SPRAS,
                  MAKTX TYPE MAKT-MAKTX,
                  MAKTX TYPE MAKT-MAKTG,
                  CELLTAB TYPE LVC_T_STYL,  " Its Working perfectly fine..
                 END OF TY_MAKT.
    DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
              WA_MAKT TYPE TY_MAKT.
    Its working perfectly fine. if still you are facing any issue post your complete code.
    Thanks,
    Sandeep

  • Problem with a table control

    Hi gurus,
    I´ve a problem with a table control. It has 3 columns which one is a checkbox.
    I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
    Thanks for all
    Dani

    Assign a function code to the checkbox column....
    so when u check / uncheck any entry, PAI + PBO will be triggered....
    In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
    by looping at screen and setting screen-input = 0 for rest of the columns.
    like ...
    LOOP AT tc_itab
           WITH CONTROL tc_test
           CURSOR tc_test-current_line.
       module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
    ENDLOOP.

  • Problem with maintain table views SM30 Transaction

    Hello All,
    i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
    we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
    Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
    the ZIV_DP_PLCHAR_LA is the name of my table...
    can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
    SM30 "maintain table views: initial screen"
    if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
    to have a new screen?
    thanks for all
    Bilal

    Hi
    First delete the old table maintainence generator.
    Now Recreate the screen and your table is good to go..
    These error messages come when we add new fields and different version of the table maintainence generator in database.

  • Problem with Pivot Table with Graph: Line Bar Combo

    Hello people!
    I have a problem with pivot table and line bar combo (all in the same view (pivot table))
    I have some measures and one dimension in my report.
    --------------measure1---measure2---measure3
    Dim A.1
    Dim A.2
    Dim A.3
    If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
    Thank you very much!

    Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
    This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

  • Problem with truncate table in procedure ora -00054

    hi do anybody know where is mistake ???
    the procedure has problem with truncate table
    ora - 00054: resource busy and acquire with NOWAIT specified
    ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
    ora - 06512 at "POVAPSYS.POVAPSYS", line 6
    ora - 06512 at line 1
    this is my procedure....
    AS
    BEGIN
    execute immediate 'TRUNCATE TABLE hman_t_max';
    INSERT INTO hman_t_max SELECT * FROM hman_v_max;
    COMMIT;
    END;

    2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
    COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
    3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
    SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
    Gita,
    I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
    Cheers
    Sarma.

  • Problems with partition tables

    Hi all,
    I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
    (ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
    ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
    ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
    and I can't understand why!
    There's something incorrect in the script or not?
    Please help me
    Thanks in advance
    Steve
    CREATE TABLE TW_E_CUSTOMER_UNIFIED
    ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
    START_VALIDITY_DATE DATE NOT NULL ,
    END_VALIDITY_DATE DATE ,
    CUSTOMER_STATUS VARCHAR2 (255)
    PARTITION BY RANGE (START_VALIDITY_DATE)
    SUBPARTITION BY LIST (END_VALIDITY_DATE)
    PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
    (SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
    PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
    (SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
    PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
    (SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
    PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
    (SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
    PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
    (SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
    PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
    (SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
    PARTITION M210001 VALUES LESS THAN (MAXVALUE))
    (SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
    ;

    Hi Hoek,
    the DB version is 10.2 (italian version, then SET is correct).
    ...there's something strange: now I can INSERT rows but I can't update them!
    I'm using this command string:
    UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
    id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
    And this is the error:
    Error SQL: ORA-14402: updating partition key column would cause a partition change
    14402. 00000 - "updating partition key column would cause a partition change"
    *Cause:    An UPDATE statement attempted to change the value of a partition
    key column causing migration of the row to another partition
    *Action:   Do not attempt to update a partition key column or make sure that
    the new partition key is within the range containing the old
    partition key.
    I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
    Do u agree or it's possible an update on a field that implies a partition change?
    Regards Steve

  • Problems with rendering quality in Premiere Elements 9

    Hello, I've made a few videos with PE 9 now, and I get very poor quality rendering despite trying several different settings. I saw on a help thread earlier that I needed to try changing to HD when creating the new file from the beginning. I did that, but it only made my PE 9 run more slowly, and the rendering quality was not improved. I also read somewhere that using .MOV files as a source can cause problems with rendering; is that true? I hope not! I use a Lumix bridge camera for my videos, and the video quality is very good. And when I'm working with these videos within PE 9 the quality is great. It's only when exporting to various file types that the quality suddenly becomes poor. For the most part I have made compilation videos of gymnasts, and when their legs move they are often so lined or pixelated that they become invisible. Here is an example of a short gym video I made yesterday: http://www.youtube.com/watch?v=-0s7tUBcSZk. The last girl jumping gives the best example of this invisible leg problem.
    You can see the original source films here: http://www.youtube.com/watch?v=zmUMi9oN8dQ
    http://www.youtube.com/watch?v=OEzcJZjhxiI
    and http://www.youtube.com/watch?v=I53twqPQMV4
    The sequences I took in my compilation video start at about 20 seconds in the source videos.
    Youtube does reduce the quality of the videos slightly, but in any case you can definitely see a difference in quality between the source videos and the PE 9 rendered compilation video.
    I'm quite disappointed because I made a longer compilation video set to music (which was a lot of work), and it looks so much nicer on PE 9 than on any of the rendered formats, but of course I can't share the PE 9 version!
    Thanks very much for your help.
    Chleste

    Thanks Steve. I'm not sure what resolution I'm shooting in, actually. However, the thing is that when I make these compilations, I like to go back to source videos I've made in the past sometimes. Sometimes these videos come from a Canon camera, and sometimes they even come from my Samsung mobile telephone. I like being able to creatively combine historic moments, and these moments might have been recorded without any intention at the time of making a compilation video. Is it not possible to combine several kinds of video sources?
    I'm uploading an example of a compilation with mixed source videos from various kinds of cameras. It's 710 Megs so it will take a while, but when it's finished you will be able to see it at http://youtu.be/CslpULRe4LU.
    I opened up the file for the compilation of the four girls on the beam (video posted in original message), and I do indeed see those red lines in the timeline. Is there anything I can do now about that, or do I have to start the project all over?
    I'm confused about the processor requirements. Even if I can see my video perfectly in PE 9, the actual export process will be affected if my system is not up to par? If so, that's a bit disappointing! I'm not sure what my processor details are, but I will find out and let you know.
    Many thanks.

  • Problem with the table control BDC in FV60 transaction

    Hi All,
    I got the problem with the table control in FV60 transaction.
    This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
    I know we can post only 999 line items,but in my file only 920 line items.
    Please give me solution,if anybody come across this situation.
    Thanks & regards,
    rakesh.

    Hello Rakesh ,
    your file may have only 920 line items , but based on those line items, SAP may create few more  new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
    regards
    Prabhu

  • Problem with rendered attribute in jhs 10.1.3.3

    We are currently trying to migrate our applications from jhs 10.1.3.2.52 to jhs 10.1.3.3.87 using jdeveloper 10.1.3.5. We are facing a problem with all the detail groups structured inside detail group regions - they have all disappear from the pages.
    In my example code i have two master-detail groups Products (Master) and ExpertiseAreas (Detail) on the same page:
    Products - Group
    -> ExpertiseAreasDtl - Detail Group Region
         -> ExpertiseAreas - Group (Samepage="true")
    The problem is that the detail group ExpertiseAreas is not rendered on the page.
    As i looked in through the pages generated by the 2 different releases of jhs using the same app definition, i can see the following:
    CODE GENERATED FOR THE ExpertiseAreasDtl Detail Group Region (all the vms used are the default):
    in jhs10.1.3.3.87:
    <af:panelGroup *rendered="#{(ProductsIterator.currentRow!=null and ProductsIterator.findMode!='true')}"* id="ProductsRegionsExpertiseAreasDtlPanelGroup">
    in *jhs 10.1.3.2. 52*:
    <af:panelGroup id="ProductsRegionsExpertiseAreasDtlPanelGroup">
    First of all a rendered attribute is being generated in the new version of jhs and not in the old.
    The real problem seems to be with the iterator binding generated from verticalRegionContainer.vm in the regular expression: "#{(ProductsIterator.currentRow!=null and ProductsIterator.findMode!='true')}". It should have been *bindings.*ProductsIterator and not plain ProductsIterator. Has anybody got any ideas on how to solve the problem?
    Thanks
    Giorgos
    Edited by: user647567 on 17 Δεκ 2009 2:16 πμ
    Edited by: user647567 on 17 Δεκ 2009 5:58 πμ

    Giorgos,
    We have uploaded a new service update, 10.1.3.3.88, on the cso.oracle.com site. This should fix your issue.
    Steven Davelaar,
    JHeadstart Team.

  • Problem with data table and internal and external command button

    thanks for your time,
    i have this problem
    <t:dataTable binding="#{manejadorAsociarEvaluadoresProyecto.tablaPosiblesEvaluadores}"
    cellpadding = "6"
    cellspacing = "3"
    value = "#{manejadorAsociarEvaluadoresProyecto.listaPosiblesEvaluadores}"
    var = "posibleEvaluador"
    preserveDataModel="false">
    <h:inputTextarea value="#{posibleEvaluador.correoActualCuerpo}"
    cols="50"
    rows="50"
    rendered="#{posibleEvaluador.detalle}" />
    <h:commandLink immediate="false" action="#{posibleEvaluador.editar}" value="Editar Correo"/>
    </t:dataTable>
    <h:panelGroup id="panelBotonEvaluadores" rendered="#{!manejadorAsociarEvaluadoresProyecto.b_mostrarEvaluadores && manejadorAsociarEvaluadoresProyecto.tieneProyectos}">
    <h:commandButton action="#{manejadorAsociarEvaluadoresProyecto.mostrarEvaluadores}"
    value="Asociar evaluadores"/>
    </h:panelGroup>
    this is the method of posibleEvaluador
    public String editar()
    setDetalle(!getDetalle());
    return "";
    all run perfect, until y click in "asociar evaluadores" button, after of this the commandLink "editar Correo" not run, this commanlLink is for not show the inputTextArea, i don't know what happend.
    thanks for your help

    Hello,
    I have replicated and confirmed the problem with LabVIEW 2010, Report Generation Toolkit 2010 and Word 2010.  I have filed this to R&D under CAR ID #257414.  As a workaround you can manually set each cell using Word Edit Cell.vi.  I have attached a simplified representation of this unexpected behavior as well as the workaround.  Hopefully this helps everyone out!
    David_L | Certified LabVIEW Architect
    LabVIEW Tools Network | LabVIEW Tools Network Developer Center
    Attachments:
    Word 2010 Table CAR.vi ‏17 KB
    Word 2010 Table FIX.vi ‏22 KB

  • PDF export - problems with displaying tables

    Hi,
    I have nice and neat rtf template with some text and big table. It looks fine, but when I export it to PDF it starts the table from new page, not just below the text, which results in 75% blank page. How can I fix it?

    We are using the PDF Export 8.3.7 version, and are having a similar problem. We have a Word file (.doc) with an embedded graphic. Inside the graphic is a table (the original graphic was created some where else and had text and a table, then an image was made of that which was then embedded as a graphic in the Word document). The problem is that the table does not render corretly - the last row of data is not displayed. Oddly, if in the resulting PDF/A output you highlight the region where the data should be displayed, and copy that to Word/Notepad, the data is there, the issue seems to be in rendering the data to make it visible in the rendered PDF/A output. We see other problems with tables in other files, for example some tables are rotated ninety degrees.
    Will there be a fix to PDFExport anytime soon?
    Thanks,
    Kevin

  • Problem with ADF Table and doDML method.

    HI,
    I have a problem with ADF Trinidad Table. I have one search form and which i click on search button the result is coming it's working fine, And when i click on CreateInsert button to insert a new row it's adding after entering all the data into the table when i click on button on the page i am getting error like
    Messages for this page are listed below.
    Error     
    Missing mandatory attributes for a row with key oracle.jbo.Key[1 ] of type AppModule.CmSubscribersView1
    Error     
    Attribute Name in AppModule.CmSubscribersView1 is required
    Error     
    Attribute CreatedBy in AppModule.CmSubscribersView1 is required
    Error     
    Attribute CreationDate in AppModule.CmSubscribersView1 is required
    Here Created By and Creation Date are not available in the table i need to set these data from back end for that i have used doDML() method in the entity object and i written the logic but this method not even invoking as i couldn't able to see the logs in the server.
    protected void doDML(int operation, TransactionEvent e) {
    super.doDML(operation, e);
    System.out.println("^^^^^^^^^^^^^^^^66666Inside entity object^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ");
    // AppModuleImpl am=new AppModuleImpl();
    // Number userID= am.getUserId();
    //System.out.println("User id in the Entity Object Is: "+userID);
    oracle.jbo.domain.Date dt = new Date();
    if(operation ==DML_INSERT){
    EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
    CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
    Number n=new Number(1599);
    newSubscribers.setCreatedBy(n);
    newSubscribers.setCreationDate(dt);
    newSubscribers.setLastUpdateDate(dt);
    newSubscribers.setLastUpdatedBy(n);
    But still the same problem can any one help me inthis.
    Regards,
    Edited by: user5802014 on Aug 21, 2009 2:04 PM

    Hi,
    Modify your method to call super.doDML() after initialization of mandatory attributes as below:
    protected void doDML(int operation, TransactionEvent e) {
         oracle.jbo.domain.Date dt = new Date();
         if(operation ==DML_INSERT){
              //PRE-INSERT code begins     
           EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
           CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
           Number n=new Number(1599);
           newSubscribers.setCreatedBy(n);
           newSubscribers.setCreationDate(dt);
           newSubscribers.setLastUpdateDate(dt);
           newSubscribers.setLastUpdatedBy(n);
           //PRE-INSERT code ends
           super.doDML(operation, e);
           //POST-INSERT code if any
         }else
            super.doDML(operation, e);
    }Sireesha

  • Problem with Light Table in Bridge CS6

    Hi! After a re-install (which didn't fix the problem with PS), I now find that, when using the light table in Bridge CS6 and after hitting the space bar, if I then click on the image, it goes to 800% size! Prior to the uninstall & re-install, it worked perfectly in taking images to 100% size.
    Hope someone can help.......
    Thanks, Wardie

    Why did you reinstall photoshop cs6?
    What operating system are you using?
    Did you reinstall all the updates for photoshop cs6 by going to Help>Updates from within photoshop cs6?
    After you enter the light table, use your mouse scroll wheel to zoom back to 100% and exit the light table.
    The next time you go to the light table and click on the picture it should only go to 100%.

Maybe you are looking for

  • No wireless connection after pacman update

    I dont get any connection whatsoever after a pacman -Syu . Im using wicd and iwconfig shows the device. Im only using wicd and the service should start and connect after booting but it dosnt. If I start the wicd-gtk, it dosnt show the connections. I

  • Ipod 5 not turning on

    So last night my ipod just shut down and it was fully charged. When I try to turn it on it wont even blink. I know i didnt shut the power. What should i do?

  • Exclusive! There is a pdf reader for S40 platform.

    I discovered a way to read pdf files on all phones witch have S40 platform. This is 100% working. Before writing it I thought to see others comments about this matter. I WILL TELL THE SECRET LATER. Moderators Note: Profanities removed, please do not

  • No jcryptoki in java.library.path

    Hi everyone,      I encountered the error msg : no jcryptoki in java.library.path while trying to call a eracom HSM card in an UNIX env. Did anyone know why??? I tried the -Djava.library.path=..... But still had the same msg. Can anyone help me???

  • Oracle Endeca Search

    What will the difference in IBM Data Explorer?