Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Similar Messages

  • Problems with Rescue and recovery

    Hi,
    I have a T500 (2082 52G) with XP running. Having had problems with some software I tried to use Rescue and Recovery 4 to recover from an earlier backup. However, the Recovery still is at 0 % after 3 hours. Do I have an opportunity to shut down the system or cancel the recovery without crashing anything? I read "Dont shut down during the process" at the beginning. As I am business user it is _most_ important not to loose any data.
    Any reply is much appreciated!
    Regards,
    Peter

    Hi,
    any advice please ?
    thx

  • T43 problem with Rescue and Recovery

    Hello
    I have a small problem with the portable one t43, when i try to install the Rescue and Recovery, it gives me the following error:
    Free sufficient space does not exist in the sector of starter to install the agent of Rescue and Recovery
    there it is known solve someone like
    thank yo in advance
    Javier Arratta

    I have the same problem with my T41. Is it possible to increase the size of the MBR?
    Jim

  • Problems with the Oracle Home Page (maybe Norton Internet Security)

    Hello Everybody!
    Like others messages, I've got problems to see the Oracle 10g Home Page. I can log to the database in SQL Plus perfectly, but not in Home Page. I tried by the following ways:
    http://127.0.0.1:8080
    http://127.0.0.1:1521
    http://{my_ip_adress}:8080
    http://localhost:8080
    and I can't display anything. I've got WinXP Professional Edition and Norton Internet Security. I tried to connect changing the options of Norton's Firewall, but the Home Page doesn't work. Somebody has any idea what´s my problem?? If so, tell me please. I've worked many nights in the solution, but the problem still be there.
    Thanks for reading, and replay...
    Mario.

    To diagnose a installation issue:-
    Please provide the following
    1) The output (from the DOS command line) of lsnrctl status
    2) The output (from the DOS command line) of netstat -a
    3) The output (from the SQL Command line) of
    connect / as sysdba;
    select select dbms_xdb.gethttpport() from dual;
    Please note that the output of netstat -a can provide information that could be used to compromise your system. If the system is on the network, please upload the output to the upload site.
    If this checks out correctly (8080 is the port), then it is a browser issue. These can be legion. Check that you are not going to a proxy server for 127.0.0.1 or host. Check that you are not disabling access to 127.0.0.1 or host in your browser. Check that cookies are enabled. If possible, try a different browser (copy and paste the URL from one to another) Check that the host name you are providing actually resolves to your local machine (ping host)

  • Problem with Itunes and NAS after installing latest version of Itunes

    After installing the latest version of Itunes on my new PC (Windows 7 Ultimate) I have problems seeing the music off the Itunes server on my NAS.
    I see the name of the NAS under tab SHARED (GEDEELD in dutch), but when I click on it,  Itunes is making connection with the NAS but I see the music for less then a second.
    Then the display goes back to the tab LIBRARY.
    I've searched the web for this problem, checked on my firewall,... nothing to find.  On another windows 7 PC, it is still working fine but this is an older version of Itunes.
    So what can be the problem ?

    No, I had not uninstalled it, I didn't realize I had ever installed it.  I don't use it at all, never have.  I uninstalled the MobileMe Control Panel then restarted my computer for good measure, and that appears to have resolved the issue!  Thanks very much for your help!

  • Is anyone having problems with numbers and keynote after installing ios7.1?

    Neither numbers or keynote will open after I installed ios7.1 on my iPad. Pages and Database open just fine.

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • I am having awful problems with mouse and trackpad after installing Lion

    I have tried 3 different brands of mice and it happens with each one. the mouse clicks and sticks spontaniously and wont let go and hitting esc or trying to click somewhere else doesn't have any effect - it wont let go. And it doesn't seem to matter which program. At forst i thought it was just pwer point but it still happens if I command/tab over to mail or finder. and then I get the stupid wheel of death. power point (or whatever program I'm in) locks up. and then I lose recent edits.
    I have a Mac book pro. I have use and external keyboard and monitor when I'm at my office.
    When the problem has happened I have tried using the trackpad - but it's like it's dead. No click effect. No help!
    I AM REALLY TRYING TO NOT GET ANGRY - BUT I AM READY TO SCRAP LION!!!!!!!!!!!
    HELP!!!!!!!!

    Thanks for the tip re MagicPrefs! Great app!
    Is anyone having trouble with Mac losing the connection to Magic Mouse after the Mac goes to sleep? I am running Mac Mini late 2009 with dual-core 2.0 GHz and 4 GB RAM. Never had any issues under Snow Leopard, only after the upgrade to Lion. Battery is OK (tried fresh ones with no luck).
    Turning the mouse off then on does not help, but ocasionally I have been able to get the mouse back by simply using Command+Tab. It does not seem to matter which app is active.

  • Problems with iPhoto and Aperture after installing Mavericks

    I use iphoto 11, version 9.5 (902.7) and Aperture 3.5.  both are dodgy since installing Mavericks - freezing, not allowing access while wheel spins, showing "Processing". I've re-installed both aperture and iphoto from the Apps store.  No difference. Advice please.

    The problem keeps occuring every time  I shut down my laptop and reopen it when I am not at home (i.e. no Time capsule connected...)
    What could I do to solve this issue...anyone please?

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Back up with rescue and recovery

    I made a back up with rescue and recovery of windows vista, I changed to Windows 7 (that is working better), and I can't delete the back up. Is a 30 gb backup, that  I can' t read with anything to delete it.
    Message Edited by Pedrogaris on 05-23-2009 05:30 PM

    Hi North450,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the HDD was not working and is replaced in your J105 Desktop, if you have created the recovery discs before the HDD got crashed. I suggest you to install the OS (Operating System) using the Recovery discs to factory reset as it will create the default recommended partitions required for the computer and I’m sorry to inform you that the SATA drivers are not available in our support website for Windows Xp, but can be download from the Intel. Below is the link to download the driver:
    Intel Download Center
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Rescue and Recovery after update from Windows Vista to 7

    I've updated my 2 years old Lenovo T60 from the preinstalled Windows Vista to Windows 7. For short: I like it.
    I kept the recovery partition but now want to update it, to keep it in sync with the current windows and Rescue and Recovery versions. By the way, due to earlier problems the system in this versions is not functional anymore. I tied to read the manual of Rescue and Recovery, but didn't get it...
    Is their an "easy" way (or documentation) to accomplish that?
    Thanks and Greetings

    T60-user wrote:
    I've updated my 2 years old Lenovo T60 from the preinstalled Windows Vista to Windows 7. For short: I like it.
    I kept the recovery partition but now want to update it, to keep it in sync with the current windows and Rescue and Recovery versions. By the way, due to earlier problems the system in this versions is not functional anymore. I tied to read the manual of Rescue and Recovery, but didn't get it...
    Is their an "easy" way (or documentation) to accomplish that?
    Thanks and Greetings
    The factory partition can't be updated - it is your recovery for what came out of the box with the system.  You can create factory recovery CD's/DVD's and store them somewhere just in case, and then you should be able to remove that partition and reclaim the space.  At that point, Rescue and Recovery for Win7 becomes your sole recovery option.
    There is a lot of new architecture in the Win7 version of R&R so you can't "upgrade" it from Vista - you'll need to install the new version in Win7.  It would probably be a good idea to burn your Vista Rescue and Recovery backups to CD/DVD before you upgrade, too.

  • How to access another computer's backups with Rescue and Recovery

    Hi all,
    I'm in the middle of a disaster. It is a long story, but basically, here is what I need to do now:
    My laptop was backing up to my NAS using Rescue and Recovery (R+R). I no longer have that laptop. How can I access those backups and retrieve files using another Lenovo PC now?
    Here's what I've tried on the Lenovo PC to access the laptop's backups:
    When I open Windows Explorer and go directly to the NAS, I can see the RRBackups folder and the directory structure, but all the files are like Data0, Data1, etc. So can't restore those.
    When I open R+R on my PC and try to restore individual files from Network, nothing shows, as if there are no backups on the NAS.
    When I press F11 and boot into R+R, I can see the Scheduled Backups on my NAS, but when I click on them to access individual files, they appear empty.
    Thanks for your help.

    bighill89, welcome to the forum,
    do you know which version of R&R was installed on the ThinkPad and did you by any chance create a cd?
    If there are version differences between the two systems there may be problems recovering data out of the backups, using a rescue cd may help. The only doubts I have here is whether or not the correct network driver will be present on the cd allowing you to access the NAS.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Power on and hard disk password issue with rescue and recovery ?

    I have set a power on and hard disk password to prevent any unauthorized user to boot the computer and thats works fine but the problem is that it can be bypassed very easily by pressing the THINKVANTAGE blue button and going through the initial screen of the rescovery process.
    When you reach the main screen of the recovery process just press on "restart system" and on the next boot up you won't be asked for a password and it will boot into Windows. Is there any way to prevent a user to initiate a rescue and recovery to bypass the password or even better a patch that will trigger the password screen as soon as the blue THINKVANTAGE button is pressed ?

    I just recently discovered this problem as well.
    I'm hoping someone can help us with this.

  • How to get thinkvantage rescue and recovery to install on windows 7

    I have successfully upgraded from Vista 34 bit to Windows 7 64 bit.  All is working smoothly, however, the thinkvantage toolbox tells me to install thinkvantage rescue and recovery.  I have tried to do this from the Lenovo website, however an error mesage tells me I have to install something else first.  Unfortunately, I don't know what it is or where to find it.  Any suggestions?
    Solved!
    Go to Solution.

    Alia wrote:
    I have successfully upgraded from Vista 34 bit to Windows 7 64 bit.  All is working smoothly, however, the thinkvantage toolbox tells me to install thinkvantage rescue and recovery.  I have tried to do this from the Lenovo website, however an error mesage tells me I have to install something else first.  Unfortunately, I don't know what it is or where to find it.  Any suggestions?

  • Time Capsule with Rescue and Recovery v4

    I am unable to backup my Thinkpad X300 on to Time Capsule using Rescue and Recovery v4. Other Windows XP applications can see the Time Capsule just fine.
    I have added the Time Capsule to the Windows workgroup also, and use Rescue and Recovery on the XP machine to select the Time Capsule as the backup location. The Rescue and Recovery always fails at the beginning saying "The backup was cancelled".
    Please help!!

    ThinkVantage Rescue and Recovery v4.2 is available to enterprises at this moment only, you can buy it from IBM parts for $75 + state tax + shipping though.
    I've come a long, long way," she said, "and I will go as far,
    With the man who takes me from my horse, and leads me to a bar."
    The man who took her off her steed, and stood her to a beer,
    Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.
    Present: T60 2007-55U, IBM 701c,
    WorkStation: IBM IntelliStation A Pro.

Maybe you are looking for

  • Table name for the iexpense page

    Hi, I am trying to find the database table name for per-diem policy schedules data, in iexpense application. Is there a way to find the table name for these OA pages? Pl. let know. any suggestions will be helpful. Thanks Ram B.

  • ALE HRMD_A with E1PORIG Segment Problem

    Hi We set up an ALE scenario with HRMD_A. We also did the set up that the E1PORIG Segement is written. The initial distribution with RHALEINI works fine, the segement is E1PORIG is written. Now we activated change pointers for HRMD_A. If we use the r

  • Use the system lang of AIR applications auto update.

    Hello, I recently used the auto update framework for my AIR application, this works fine but i have a small problem. I made some reasearches and i found AIR uses the system lang by default. When i install my package for the first time, the lang is my

  • Weblogic 10.0.1.0 -  Server shows in console as RUNNING, but unreachable.

    It seems the admin server loses contact with some (not all) managed servers, all of these are responsive and work correctly, but you can't use the admin console for monitoring or everything else. In the server list view you can see they show as RUNNI

  • How to not print comments/notes

    Hi, sometimes I use these yellow sticky-like notes to make comments on my sheets. When printing the sheet, I don't want those notes to be printed. Is there a way to exclude them from printing (other than placing them on a separate page or sheet)? p.