Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

Similar Messages

  • Multiple Revision Levels for a Material

    Today, Tyco Electronics has many manufacturing sites located around the world.  A given material may be manufactured in multiple locations.  When Engineering determines that a given material must change revision level, they determine a date that this new revision level becomes effective.  Unfortunately, not all manufacturing sites can be ready to manufacture to that new revision level.  In fact, based on tooling, one manufacturing site may manufacture to both the old and new revision level for a period of time until all of their tools/dies have been switched over.  In addition, customers may require that only the latest revision be sold to them.  Does anyone else have this requirement/issue today?  If so, how are you handling this within the SAP R/3 system since material revision is at a global level and there is no component revision level field on the bill of material.  Requirements are to sell at a material/revision level, plan to a particular material/revision level, stock at a material/revision level.  Any input you have would be greatly appreciated.

    Which strategy shall I use for picking?
    Can you please guide me what material master data fields are required for these strategies.
    regards,
    VS
    Edited by: vs on Jan 12, 2008 7:01 PM

  • ECO number with revision level and release key

    Hi All,
    I have a requirement from client with regards to Engineering change manangement.
    The scenario is that we are maintaining BOM for materials.Whenever a change is required  for BOM a ECO number is created with release key.
    Once the BOM is changed against ECO number is created a workflow is triggered for approval.
    Then it goes through a series of approvals in the heirarchy.In each level the reviewer will propose a new value for the changed line item.
    All these changes have to be maintained in record.At the end the final approver reviews all the proposed changes and release the ECO number with the appropriate change.
    I had a thought of implementing the above scenario with ECO with revision level and release key.
    But I am unable to replicate the scenario due the fact that,when I select the ECO number with release key,I cannot select the material in Object type.
    Its disabled.Its available when I create a ECR with release key.
    Please suggest a way to create ECO number with release key and revision level for BOM.
    Regards
    Richie

    Hi,
    You create the revision level against the material (via MM02, basic data tab)) not against the serial. The serial number, by definition, would be unique to the combination of material and revision.
    Regards

  • Revision number for Header material in Production order.

    I have maintained Revision number in material mster  for Header material in Production order and also for components.
    1)Revision number for Header material in Production order is not appearing in AFKO table against production order.
    2)Revision number for components in Production order is not appearing in RESB table against reservation.
    Any settings for that please guide.

    Hi,
    Revision number generation is using ECM only possible. Are you using the ECM with revision levels. Check this.
    Regards,
    V. Suresh

  • Revision level issue in Material Master maintenance

    Hi All,
    When I try to change the revision level for a certain change number in our production client in the material master I get the following error
    Priority of revision level E is too small
    I have checked in CC13. But I could not find anything relevant.
    There are a number of revision levels available in the dropdown list.If I select some of the last revision levels available in this dropdown list in the material master the system accepts it readily but if I select any of the earlier revision levels in the list the system throws the above error message.
    Please can someone tell me what is wrong here.
    Regards,
    V S

    Hello All.......any clues???
    Does this belong to MM?......if not where can I get answers?.....which forum can I refer?

  • Has anyone else had a problem with obtaining funds for replacement hard drive?, Has anyone else had a problem with obtaining funds for replacement hard drive?

    Has anyone else had a problem with obtaining funds for replacement hard drive?,  I have had difficulties obtaining replies as the funds appear to have gone astray and Apple aren't prepared to give me their bank details so my bank can try and locate them?

    Might thry this if you are in N. America. It is a escalated level of support:
    Apple Customer Relations 1-800-767-2775

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • Haviing problem with the facebbok for 9800

    i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

    Hello nomanmahmoo, 
    Welcome to the forums. 
    Have a look at this article which may help you out with your issue. 
    Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Litlle problem with nokia maps for 5800 xm

    hi evryone,
    i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
    please help thank you

    Hi,
    When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

  • Problems with fuction keys for brightness

    i have laptop hp 15 r006tx Product number: G8D30PA#ACJ 
    i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

    OK...
    I was right.  You have no graphics driver installed for the Intel HD graphics adapter.
    I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
    Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
    Make sure you have installed this Intel chipset driver first and reboot.  If you have done this already, you can skip this step.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
    Next, install the Intel HD graphics driver and reboot.  This driver is for W8.1.  If you installed W8, you need a different graphics driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

  • Problems with Sybase Database for Collection Manager in SCE2020

    We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
    [root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem           1K-blocks      Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00                      149559596 138280700   3681636  98% / /dev/sda1               101086     20685     75182  22% /boot none                   1036624         0   1036624   0% /dev/shm
    We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
    Here is the info:
    Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
    [root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
    Name                    % Data Free % Log Free
    Database                        55      99
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
    /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
    /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
    [root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
    Test: 01db_up.sh. Status: FAIL. Message: DB is not running
    Test: 02cm_up.sh. Status: PASS. Message: CM is running
    Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
    Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
    Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
    Message was edited by: EMILIO MENCIA

    Tomo:
    we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
    This is the log of the CM. What can be the problem? Thanks tomo
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts during current sample period: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts since startup: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections during current sample period: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections since startup: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections during current sample period: 15.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections since startup: 18.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used during current sample period: 1.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used since startup: 3.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Error: 632, Severity: 20, State: 2
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Attempt to move memory with an incorrect length
    of -794444483. Maximum allowed length is 16384.
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  SQL causing error : =
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curdb = 4 tempdb = 2 pstat = 0x10000
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  lasterror = 632 preverror = 0 transtate = 3
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curcmd = 0 program =                          
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  end of stack trace, spid 11, kpid 1755578479, suid 3
    AFTER RESTART
    ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Adaptive Server Enterprise (Small Business Edition)
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel  Using config area from primary master device.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel  Locking shared memory into physical memory.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel  Internal run-time model set for Linux  - Native
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using 1024 file descriptors.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Copyright 1987, 2007
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc.  All rights reserved.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Unpublished rights reserved under U.S. copyright laws.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel 
    Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
    Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  This software contains confidential and trade secret information of Sybase,
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Inc.   Use,  duplication or disclosure of the software and documentation by
    Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  the  U.S.  Government  is  subject  to  restrictions set forth in a license
    Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  between  the  Government  and  Sybase,  Inc.  or  other  written
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  specifying  the  Government's rights to use the software and any
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  applicable FAR provisions, for example, FAR 52.227-19.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Platform TCP network is forced to IPv4-only.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel  ASE booted with TCP_NODELAY enabled.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  SSL Plus v5.0.4 security modules loaded successfully.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  Network and device connection limit is 1009.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Number of blocks left for proc headers: 12760.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Proc header memory allocated 2552 pages for each per engine cache
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Size of the 16K memory pool: 307200 Kb
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Memory allocated for the default data cache cachelet 1: 307200 Kb
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Enabling Linux Native Kernel asynchronous disk I/O strategy.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Virtual device 0 started using asynchronous i/o.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server  Loaded default Unilib conversion handle.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel  Worker Thread Manager is not enabled for use in ASE.
    Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Unix interval timer enabled for sysclk interrupts.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel  Begin processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Completed processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Encryption provider initialization succeeded on engine 0.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  engine 0, os pid 27618  online
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server  No active traceflags
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel  libomni1 - Component Integration Services: usin
    g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server  Opening Master Database ...
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server  Loading ASE's default sort order and character set
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server  Recovering database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server  Started estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started REDO pass for database 'master'. The total number of log records to process is 13.
    Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Redo pass of recovery has processed 4 committed and 0 aborted transactions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Completed REDO pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Recovery of database 'master' will undo incomplete nested top actions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Started recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server  Completed recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server  Started filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server  Completed filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Started cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Completed cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server  Checking external objects.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  Database 'master' is now online.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  The transaction log in the database 'master' will use I/O size of 16 Kb.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server  Warning: ASE_HA has no valid license and therefore is not initialized.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server  server name is 'pqbsyb1'
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server  Activating disk 'sysprocsdev' of size 126976 KB.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Virtual device 1 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server  Activating disk 'systemdbdev' of size 49152 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Virtual device 2 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server  Activating disk 'apricot_data1' of size 35082660 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server  Activating disk 'apricot_log1' of size 2980002 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server  Activating disk 'tempdb_dev' of size 1048576 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Virtual device 5 started using asynchronous i/o.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server  Recovering database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Completed REDO pass for database 'sybsystemdb'.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Started recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server  Completed recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server  Started filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server  Completed filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Boot Count: 13
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server  Checking external objects.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server  The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server  Completed recovery checkpoint for database 'model'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server  Started filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server  Completed filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Started cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Completed cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server  Checking external objects.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server  The transaction log in the database 'model' will use I/O size of 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Database 'model' is now online.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  The logical pagesize of the server is 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  0 dump conditions detected at boot time
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Clearing temp db
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server  Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server  Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server  Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server  Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server  Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server  Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
    Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server  Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
    Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server  Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server  Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server  Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server  The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server  Database 'tempdb' is now online.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server  Recovering database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server  Started estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed REDO pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server  Completed recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server  Started filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server  Completed filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Started cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Completed cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server  Checking external objects.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server  The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server  Database 'sybsystemprocs' is now online.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  The server will recover databases serially.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server  Recovering database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server  Started estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started REDO pass for database 'apricot'. The total number of log records to process is 846.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Redo pass of recovery has processed 2 committed and 138 aborted transactions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Completed REDO pass for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Recovery of database 'apricot' will undo incomplete nested top actions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Started recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server  Completed recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server  Started filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server  Completed filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Started cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Completed cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server  Checking external objects.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server  The transaction log in the database 'apricot' will use I/O size of 16 Kb.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server  Database 'apricot' is now online.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server  Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server  Recovery complete.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default unicode sort order is 'binary'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default sort order is:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'bin_iso_1' (ID = 50)
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  on top of default character set:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'iso_1' (ID = 1).
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  Cannot send, host process disconnected: btl-sce-cm  suid: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  Error: 1608, Severity: 18, State: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0)

  • Problems with Photoshop cs4 for the Mac

    I am having all kinds of problems with Photoshop CS4 for the Mac.  When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop.  I drag a photoshop file over the application icon, the whole screen flickers and nothing happens.  I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit.  I can repeat this pattern over and over.  What is happening?  How do I solve this problem?
    --Kenoli

    Thanks for the reply.  I am using  Photoshop 11.0.1.  I am using the latest version of Snow Leopard.  I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now.  My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac.  Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while.  I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply.  Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
    The problems with Photoshop  (starting with just taking a long time to load)  have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software.  I will report if problems go away.
    Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere.  However, I couldn't find anything and I don't use two monitors.
    So . . . Adobe just seems to be getting more expensive and more buggy.
    Incidentally, why is it still running in Rosetta rather than natively?  Adobe now has a real Intel processor to work with.
    --Kenoli

  • I have a HP workforce 610 and cannot scan.  I just spoke with HP and they told me it is a software problem with my MAC for image capture.  Anyone else having difficulty?

    I have a HP workforce 610 and cannot scan.  I just spoke with HP and they told me it is a software problem with my MAC for image capture.  Anyone else having difficulty?

    If Image Capture doesn't work you could try the paid for app VueScan ( www.hamrick.com ). You can try it for free in demo mode to see if it works before purchase.

Maybe you are looking for

  • Windows 7 and internet connection issue

    I am having a problem connecting to internet on Windows 7 OS. I have a Macbook that installed Windows 7 on Bootcamp. When I connect the DSL wire to my computer in dormitory it connects automatically. But when I go to somewhere else it doesn't connect

  • OWB 9.0.4 for Linux

    When will it be available ? Suppose I have Design, Runtime & Target Schema in 9i Database installed on Linux, and Client on Windows. Do I need whole Linux version of OWB only to install "OWB Server Side components" on database machine ? In previous v

  • ProcessBuilder - no response - JAVA_HOME - different JREs

    Hello All, An application uses ProcessBuilder to execute system commands. Locally is working fine with JRE 1.6. But it must be runned on a remote machine(no rights to change any settings), which has the JAVA_HOME pointing to a JRE 1.4 instalation fol

  • Upgrading iOS 5.1.1 to iOS 7

    Hi, I have a iPad and wanted to upgrade to iOS 7. I was forced to use iTunes to upgrade to iOS 5.1.1 from 4.0, but now I am not able to upgrade to iOS7 becuse it says 'Your iOS version is up to date"

  • How can i reset security questions?

    Howdie, I have money on my itunes card that i cannot redeem.  Store tells me that I have never used this computer to make a purchase before, and that I will have to answer security questions.  Then it provides me with security questions that I never