Problem with runas command. Elevation error

Running on Win 8.1 Pro I'm facing a problem with runas.
What I'm trying to do is launch an mmc as my domain admin account.
Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
runas /user:Contoso\MyDomainAdmin /noprofile mmc
This worked like a charm in Windows 7, and on my Win81Pro client it yields:
RUNAS ERROR: Unable to run - mmc
740: The requested operation requires elevation.
The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
Thanks in advance!

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Similar Messages

Problem with running commands

Hi everybody !
I'm having a form which on being submitted runs a Linux Shell Script using the Runtime class .
Shell script consists of a command which prompts the user his username/password . I may sound absurd , but I want to know whether is it possible if I could prompt the user through GUI i.e my JSP page at this point of time .
Thanks in advance ,
Bye .

Pl .help with this problem .It's urgent ,very important & challenging too .
Someone , somewhere must have faced this problem .
Thanks a lot.

Capture Problem with "escape" command and error message

Just got my Final Cut Express this week and I'm already having weird dreams about editing... I'm logging about 5 to 7 hours per night trying to figure it all out.
Anyway, my most pressing issue is that while I am in the "capture" window and I rewind my tape (a Panasonic PV-GS320) (also, running this on my macbook pro with system 10.5.2 just loaded) - I press "now" because that seems to be the easiest to start with and when I try to stop and press "escape" it won't stop. So I tried pressing option/esc and it stops but I get the following message: " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
I have some ideas but I wanted to get started working out this issue. Thanks for any help with this all you FXC gurus out there.

I recorded this in dv widescreen which imports fine in imovie. I am importing in DV NTSC 48Hz. I've tried all the settings. I know I have to probably just find the right mix of settings. I've tried changing the settings in the camera to 4:3 and back to 16:9 but I guess if you record in widescreen, you are stuck with that format. But this is actually a DV not an HDV camera

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

Problems with running Applet through HTML

I am currently having problems with running my file through the HTML. For some reason when I open it in the browser it keeps saying Error. I am programming in NetBeans.
The code I am using is:
<html>
<head>
<title></title>
</head>
<body>
<applet code=”CarApplet.class” codebase="RedCarApplet.jar" width=690 height=300></applet>
</body>
</html>

Heres the error message, I see that it cannot find the class I have stated above. Any solutions?
My class is in the 'build' folder but, the HTML file is in the 'src' folder. Now my applet contains a 'jar' file, do I need to add that to the HTML code?
load: class ‚Ä?TunerApplet.class‚Ä? not found.
java.lang.ClassNotFoundException: ‚Ä?TunerApplet.class‚Ä?
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: C:\Users\*****\*******\NetBeansProjects\RadioApplet\src\‚Ä?TunerApplet\class‚Ä?.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 9 more
Exception: java.lang.ClassNotFoundException: ‚ÄùTunerApplet.class‚Äù

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problems with 'df' command

Hello folks,
I'm having some problems with df command:
Output:
[nenemfromhell@myhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 999M 4.0K 999M 1% /dev
none 999M 4.0K 999M 1% /dev
/dev/sda8 133G 125G 2.0G 99% /media/DU
shm 999M 0 999M 0% /dev/shm
First: It doesn't show my root partition, but i can check it in gparted.
Second: /dev/sda8 is a NTFS partition that its size is 12GB
Thanks.
Last edited by nenemfromhell (2012-01-20 03:37:30)

Please include some detail as to how you solved the problem: https://wiki.archlinux.org/index.php/Fo … way_Street

I ve a problem with running the javabeans

dear all
i ve a problem with running javabean in forms 9i all codes, program units are correct. i think there is something with classpath which i dont where to put the path of bean jar files. however the simple code for the Colorpicker and keyFilter dont work when clicking the button to fire the trigger to bring the bean up.
thank you
Walaa eddien

Walaa,
Make sure you've entered the implementation class (do not append the class extension). For example, if you have a class example.class in the package otn.oracle.forum, the implementation class should be: otn.oracle.forum.example
Make sure you place the containing java archive in <OH>/forms90/java and do not forget to update the configuration section (default or app specific) parameter archive_jini accordingly.
Jeroen van Schaijk

[SOLVED] Problem with running GUI apps as root

Hi,
I have a serious problem with running any kind of software having GUI as root, which is indispensable for editing system files. For example I want to edit /etc/pacman.conf file with KWrite, and here's what I get
[zbyszek@barca ~]$ xhost +
access control disabled, clients can connect from any host
[root@barca zbyszek]# kwrite /etc/pacman.conf
kwrite(11282): Session bus not found
KCrash: Application 'kwrite' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/root/.kde4/socket-barca/kdeinit4__0
Warning: connect() failed: : Nie ma takiego pliku ani katalogu
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
drkonqi(11284): Session bus not found
Can anyone help me with this? Can anyone tell me how to login as root?
Thank you in advance.
Last edited by Zibi1981 (2010-10-05 19:30:20)

O.K., but how to run KWrite as root on my account??? That was my main question
karol wrote:
Try running 'xhost +' as root.
https://bbs.archlinux.org/viewtopic.php?pid=817674
Maybe vim is in edit mode when you press 'i' but it doesn't show '-- INSERT --' at the bottom of the screen.
Here you are
[root@barca zbyszek]# xhost +
access control disabled, clients can connect from any host
[root@barca zbyszek]# kwrite /etc/pacman.conf
kwrite(12941): Session bus not found
KCrash: Application 'kwrite' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/root/.kde4/socket-barca/kdeinit4__0
Warning: connect() failed: : Nie ma takiego pliku ani katalogu
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
drkonqi(12942): Session bus not found
Last edited by Zibi1981 (2010-09-25 10:19:50)

AdbeRdr710_it_IT.exe problem with RUNAS

Hi,
I'm trying to update Acrobat Reader 7.0.9 to version 7.1.0 on Windows XP SP2.
For deploying reason i need to impersonate Administrator before launching AdbeRdr710_it_IT.exe, but i get the error code -529697949.
If I log on client with Administrator i don't have the problem, so the problem only happens with "runas" (i tried runas with other domain admin users and the problem is the same).
Any ideas?
Best Regards,
Gianluca

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Problems with running programs

Hi,
I have written a program and have no problem to compile it. But when I try to run it by typing:
java filename ,
I get an error message saying: "Exception in Thread "main" java.lang.NoClassDefFoundError: Filename.."
Whats my problem??
Thanks

Hi there,
I believe it's a problem with your CLASSPATH settings.
You can either set ur CLASSPATH in ur Autoexec.bat file by typing the following:
SET CLASSPATH=.;%CLASSPATH%
where,
1. "." refers to the current directory your compiled class files are found (i.e. the default directory that your class file will be generated when you compile ur .java file)
2. %CLASSPATH% appends whatever you have already set in ur CLASSPATH settings before, to the current one you be setting, i.e. "." - the current directory.
However, to save urself from all these hassle, you may want to try executing the following command:
java -cp . filename
replace "filename" with the filename of ur .class file.
It should work.
Cheers
PTC

Problems with running Photoshop CS6 and Bridge with Lightroom 4 also on the same PC

I was running Photoshop and Bridge, then purchased Lightroom 4. Before installingt 4 I had no problems with Bridge, but since installing 4 all of the photo's that were held in bridge are now gone, but they are in Lightroom. With Lightroom, you are able to edit photos out of Lightroom and into Photoshop when necessary, save and close and it automatically changed the Lightroom picture.
I have two PC's, one has Bridge on it (this one) and the other without, but both have both editing prgrams installed. On the other PC I can switch between Lightroom and Photoshop with no problems, but when I try to switch with this PC, the one with Bridge installed, it will open Photoshop, but the photo will not transfer. If I close Photoshop program and go back to Lightroom, it will tell me that the picture could not be transfered to Photoshop because it would not launch. If I close that message window, it will then launch Photoshop and the picture transferes over allowing me to edit and save as normal.
My question is; does anyone know if Lightroom and Bridge should run side by side, or should I delete Bridge from this PC and see what happens. Bridge is just a holder and organizer of photos, wherease Lightroom does the same, but also has post editing capabilities. The two programs seem redundant, but if your running Photoshop, it's hard to get files out of Lightroom. It seems that you need to open Lightroom first, then you can view and chose a photo to work on, then move it back and forth between the two programs. This seems to make Bridge redundant.
Thanks for any help or suggestions.
he_b_gb1947

Hi, Yes, but that actually wasn't the problem. I start out in Lightroom,
then move to Photoshop if I have something that can't be fixed in
Lightroom. The problem was that when I tried to edit, out of Lightroom and
into Photoshop, I was getting an error message that Lightroom couldn't
prepare files for transfer because Photoshop wouldn't open. But, it had
opened, the picture just wouldn't transfer. If I closed Photoshop,
Lightroom would try again and it would open and transfer the second time. I
ended up going to the Adobe help, chat line, and they looked into my PC and
located the problem, it's now working fine. Thanks to everyone for your
inputs. Most appreciated.
Gary

URGENT!! problems with Unix command, please help

I am trying to use the following Unix command and I keep getting error messaages from stdError. However if I run the same command from the command line it works perfectly. For some reason when I run the command from inside the program it thinks the append symbol ">>" is another file.
String command = " cat /users/02/wjoc1/Test/list.mod >> /users/02/wjoc1/Test/Blacklist ";
Process p = Runtime.getRuntime().exec(command);
The error get is :
/bin/cat: >>: No such file or directory
Any help would be greatly appreciated

The better solution for this problem is write a shell script for the action you wnat to perform and execute it using the runtime.exec().In your case just cut and paste cat /users/02/wjoc1/Test/list.mod >> /users/02/wjoc1/Test/Blacklist in to a file and save it. use that file as a argument for the exec method it will work.
cheers
R.Karuna

Problem with running rhcl.exe in batch file

Hi,
I'm running Robohelp 8 and trying to use rhcl.exe to generate multiple help projects. I'm having a problem with the folder where the rhcl.exe is generating the web help. It seems to ignore the "-o" switch and gets the generation folder from the project all the time. As you can see from the log file below, the exe appears to pick up the "-o" path (......\Test\Opportunities.htm), but writes the generated files to the path in the project (.....\Opportunities\index.htm).
Anyone else come across this problem?
MY BATCH FILE IS:
"C:\Program Files\Adobe\Adobe RoboHelp 8\RoboHTML\rhcl.exe" "C:\Data\RoboHelp\RoboHelp Projects\SubProjects\SupplierPortal\Opportunities\Opportunities.xpj" -l Webhelp -o "C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Test" -g "C:\Data\RoboHelp\GeneratedWebHelp\Generate.log"
THE LOG FILE CREATED IS:
Adobe (R) RoboHelp Project Command Line Compiler version 8.0.0.203
Copyright (C) 2006-2007, Adobe Systems Incorporated and its licensors. All rights reserved.
Project: C:\Data\RoboHelp\RoboHelp Projects\SubProjects\SupplierPortal\Opportunities\Opportunities.xpj
Layout: WebHelp.
Output: C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Test\Opportunities.htm.
Scanning project for compilation....
Scanning finished.
Warning: No baggage file description.
Starting compilation...
WebHelp preprocessor 8.0.0.203
Compiling C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Opportunities\index.htm ...
Preparing to create WebHelp...
Clearing output folder...
Preparing files for WebHelp...
Copying files...
Updating files...
Finished preparing in 1 sec(s)
Initializing compiler...
Generating WebHelp 5.50 (8.0.0.203)...
Processing TOC data...
Processing Context-sensitive-Help data...
Updating HTML topics...
Updating opportunities/e-auctions/how_do_i/creating_a_new_bid.htm...
Updating opportunities/e-auctions/how_do_i/creating_a_response.htm...
Updating opportunities/e-auctions/how_do_i/viewing_auction_details.htm...
Updating opportunities/e-auctions/how_do_i/viewing_bid_details.htm...
Updating opportunities/e-auctions/how_do_i/viewing_a_list_of_auctions.htm...
Updating opportunities/e-auctions/how_do_i/withdrawing_from_an_auction.htm...
Updating opportunities/e-auctions/screen_level_help/list_of_auctions.htm...
Updating opportunities/e-auctions/screen_level_help/new_bid.htm...
Updating opportunities/e-auctions/screen_level_help/view_auction_details.htm...
Updating opportunities/e-auctions/screen_level_help/view_bid_details.htm...
Updating opportunities/e-auctions/introduction_to_e-auctions.htm...
Updating opportunities/introduction_to_opportunities.htm...
Finished updating HTML topics in 0 sec(s) : total 12 topic(s).
Processing Full-text-search data...
Finished processing Full-Text-Search data in 0 sec(s)
Applying WebHelp 5.50 Template...
Finished applying Template in 1 sec(s)
Processing Mark of the Web...
Finished compiling WebHelp in 3 sec(s)
Compilation complete.

Hi again
And that's why we call them bugs.
Did you remember to report it as same to Adobe? The link is in my sig.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Problem with runas command. Elevation error

Similar Messages

Maybe you are looking for