Problem with running j2ee

Hi,
In solaris platform, I run j2ee but I get the error :
========================================
J2EE server reported the following error: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
Error executing J2EE server ...
========================================
the port in orb.properties is not occupied by anything else and is free, but still I can't run this service. any idea?
Thanks,
S+

Nothing is hanged I do ps -e and ps -e
also netstat -a | grep 1051 doesn't show anything, it looks like the port is clear for use but still j2ee doesn't come up ...
S+

Similar Messages

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • Problem with running the midlet class (Error with Installation suite )

    hi everyone...
    i have problem with running the midlet class(BluetoothChatMIDlet.java)
    it keep showing me the same kind of error in the output pane of netbeans...
    which is:
    Installing suite from: http://127.0.0.1:49296/Chat.jad
    [WARN] [rms     ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
    i also did some research on this but due to lack of forum that discussing about this,im end up no where..
    from my research i also find out that some of the developer make a changes in class properties..
    where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
    i did that but also didnt work out..
    could any1 teach me how to fix it...
    thanx in advance... :)

    actually, i do my FYP on bluetooth chatting...
    and there will be more than two emulators running at the same time..
    one of my frens said that if u want to run more than one emulator u just simply click on run button..
    and it will appear on the screen..

  • I ve a problem with running the javabeans

    dear all
    i ve a problem with running javabean in forms 9i all codes, program units are correct. i think there is something with classpath which i dont where to put the path of bean jar files. however the simple code for the Colorpicker and keyFilter dont work when clicking the button to fire the trigger to bring the bean up.
    thank you
    Walaa eddien

    Walaa,
    Make sure you've entered the implementation class (do not append the class extension). For example, if you have a class example.class in the package otn.oracle.forum, the implementation class should be: otn.oracle.forum.example
    Make sure you place the containing java archive in <OH>/forms90/java and do not forget to update the configuration section (default or app specific) parameter archive_jini accordingly.
    Jeroen van Schaijk

  • Problem with runas command. Elevation error

    Running on Win 8.1 Pro I'm facing a problem with runas.
    What I'm trying to do is launch an mmc as my domain admin account.
    Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
    runas /user:Contoso\MyDomainAdmin /noprofile mmc
    This worked like a charm in Windows 7, and on my Win81Pro client it yields:
    RUNAS ERROR: Unable to run - mmc
    740: The requested operation requires elevation.
    The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
    In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
    If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
    Thanks in advance!

    yes, you need to be local admin to be able to elevate!
    I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not  possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
    MCP/MCSA/MCTS/MCITP

  • [SOLVED] Problem with running GUI apps as root

    Hi,
    I have a serious problem with running any kind of software having GUI as root, which is indispensable for editing system files. For example I want to edit /etc/pacman.conf file with KWrite, and here's what I get
    [[email protected] ~]$ xhost +
    access control disabled, clients can connect from any host
    [[email protected] zbyszek]# kwrite /etc/pacman.conf
    kwrite(11282): Session bus not found
    KCrash: Application 'kwrite' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
    sock_file=/root/.kde4/socket-barca/kdeinit4__0
    Warning: connect() failed: : Nie ma takiego pliku ani katalogu
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    drkonqi(11284): Session bus not found
    Can anyone help me with this? Can anyone tell me how to login as root?
    Thank you in advance.
    Last edited by Zibi1981 (2010-10-05 19:30:20)

    O.K., but how to run KWrite as root on my account??? That was my main question
    karol wrote:
    Try running 'xhost +' as root.
    https://bbs.archlinux.org/viewtopic.php?pid=817674
    Maybe vim is in edit mode when you press 'i' but it doesn't show '-- INSERT --' at the bottom of the screen.
    Here you are
    [[email protected] zbyszek]# xhost +
    access control disabled, clients can connect from any host
    [[email protected] zbyszek]# kwrite /etc/pacman.conf
    kwrite(12941): Session bus not found
    KCrash: Application 'kwrite' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
    sock_file=/root/.kde4/socket-barca/kdeinit4__0
    Warning: connect() failed: : Nie ma takiego pliku ani katalogu
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    drkonqi(12942): Session bus not found
    Last edited by Zibi1981 (2010-09-25 10:19:50)

  • Problems with running Applet through HTML

    I am currently having problems with running my file through the HTML. For some reason when I open it in the browser it keeps saying Error. I am programming in NetBeans.
    The code I am using is:
    <html>
    <head>
    <title></title>
    </head>
    <body>
    <applet code=”CarApplet.class” codebase="RedCarApplet.jar" width=690 height=300></applet>
    </body>
    </html>

    Heres the error message, I see that it cannot find the class I have stated above. Any solutions?
    My class is in the 'build' folder but, the HTML file is in the 'src' folder. Now my applet contains a 'jar' file, do I need to add that to the HTML code?
    load: class ‚Ä?TunerApplet.class‚Ä? not found.
    java.lang.ClassNotFoundException: ‚Ä?TunerApplet.class‚Ä?
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.FileNotFoundException: C:\Users\*****\*******\NetBeansProjects\RadioApplet\src\‚Ä?TunerApplet\class‚Ä?.class (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 9 more
    Exception: java.lang.ClassNotFoundException: ”TunerApplet.class”

  • Problem with XI J2EE Stack

    We are getting the following error when the XI stack starts up. It seems to point to a problem in the Exchange Profile. However, I am not sure whether it is complaining because of incorrect parameters or because it is unable to access it. This instance of XI has been running just fine for the last few months and we have had no problems with it. All the J2EE services are shut down as the exception shows. Any insight into what the problem might be is well appreciated.
    FYI, We haven't added any patches for the last couple of months. It was working fine during that time.
    Included is the output from the log.
    stdout/stderr redirect
    node name   : server0
    pid         : 4500
    system name : XID
    system nr.  : 00
    started at  : Thu Jan 20 14:57:26 2005
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude iaik/security/md/SHA a
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    SAP J2EE Engine Version 6.40   PatchLevel 87037.313 is starting...
    Loading: LogManager ... 4687 ms.
    Loading: PoolManager ... 16 ms.
    Loading: ApplicationThreadManager ... 142 ms.
    Loading: ThreadManager ... 158 ms.
    Loading: IpVerificationManager ... 126 ms.
    Loading: ClassLoaderManager ... 78 ms.
    Loading: ClusterManager ... 1558 ms.
    Loading: LockingManager ... 724 ms.
    Loading: ConfigurationManager ... 5647 ms.
    Loading: LicensingManager ... 47 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service cross started. (47 ms).
      Service memory started. (47 ms).
      Service file started. (173 ms).
      Service timeout started. (126 ms).
      Service userstore started. (31 ms).
      Service runtimeinfo started. (31 ms).
      Service tcsecvsi~service started. (362 ms).
      Service p4 started. (1541 ms).
      Service trex.service started. (692 ms).
      Service jmx_notification started. (865 ms).
      Service classpath_resolver started. (126 ms).
      Service tcsecwssec~service started. (661 ms).
      Service deploy started. (10662 ms).
      Service log_configurator started. (11997 ms).
      Service locking started. (16 ms).
      Service apptracing started. (424 ms).
      Service http started. (533 ms).
      Service naming started. (816 ms).
      Service ts started. (203 ms).
      Service javamail started. (298 ms).
      Service failover started. (220 ms).
      Service licensing started. (47 ms).
      Service appclient started. (282 ms).
      Service jmsconnector started. (455 ms).
      Service connector started. (204 ms).
      Service configuration started. (16 ms).
      Service webservices started. (2887 ms).
      Service dbpool started. (9428 ms).
      Service com.sap.aii.af.svc started. (942 ms).
      Service com.sap.security.core.ume.service started. (4048 ms).
      Service security started. (5083 ms).
      Service applocking started. (486 ms).
      Service shell started. (675 ms).
      Service tceCATTPingservice started. (189 ms).
      Service classload started. (549 ms).
      Service telnet started. (220 ms).
      Service keystore started. (1789 ms).
      Service ssl started. (156 ms).
      Service ejb started. (2322 ms).
      Service servlet_jsp started. (2400 ms).
      Service tcsecsecurestorage~service started. (753 ms).
      Service dsr started. (2150 ms).
      Service jmx started. (2730 ms).
      Service webdynpro started. (2526 ms).
      Service tcsecdestinations~service started. (753 ms).
      Service pmi started. (392 ms).
      Service basicadmin started. (894 ms).
      Service adminadapter started. (659 ms).
      Service sld started. (2824 ms).
      Service rfcengine started. (5098 ms).
      Service monitor started. (4032 ms).
      Service tc.monitoring.logviewer started. (7608 ms).
      Service com.sap.aii.af.ms.svc started. (7640 ms).
      Service jms_provider started. (11437 ms).
      Service com.sap.aii.af.cpa.svc started. (11718 ms).
      Service com.sap.aii.adapter.marketplace.svc started. (188 ms).
      Service com.sap.aii.adapter.xi.svc started. (282 ms).
      Service com.sap.aii.af.security.service started. (204 ms).
      Service com.sap.aii.adapter.bc.svc started. (361 ms).
      Service com.sap.aii.adapter.mail.svc started. (94 ms).
      Service com.sap.aii.adapter.jms.svc started. (644 ms).
      Service com.sap.aii.adapter.jdbc.svc started. (612 ms).
      Service com.sap.aii.adapter.file.svc started. (659 ms).
      Service com.sap.aii.af.ispeak.svc started. (706 ms).
      Service com.sap.aii.adapter.rfc.svc started. (1882 ms).
    ServiceManager started for 69917 ms.
    Framework started for 84184 ms.
    SAP J2EE Engine Version 6.40   PatchLevel 87037.313 is running!
    PatchLevel 87037.313 October 19, 2004 19:52 GMT
    >### Excluding compile:  iaik.security.md.SHA::a
    Jan 22, 2005 3:03:51 AM         com.sap.engine.core.configuration [Thread[Timeout Service Internal Thread,5,SAPEngine_System_Thread[impl:5]_Group]] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    Jan 25, 2005 10:17:28... ...utilxi.prop.api.PropertySourceFactory [SAPEngine_Application_Thread[impl:3]_0] Fatal: XI properties could not be initialized. Check ExchangeProfile (or aii.properties).
    Thrown:
    java.lang.Throwable: dummy Throwable for stack trace
         at com.sap.aii.utilxi.prop.api.PropertySourceFactory.getPropertySource(PropertySourceFactory.java:55)
         at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:528)
         at com.sap.aii.utilxi.misc.api.AIIProperties.<init>(AIIProperties.java:301)
         at com.sap.aii.utilxi.misc.api.AIIProperties.getInstance(AIIProperties.java:328)
         at com.sap.aii.ib.server.util.perf.TimerFactory.<clinit>(TimerFactory.java:86)
         at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:73)
         at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy30.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
         at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    Jan 29, 2005 7:37:28 AM         com.sap.engine.core.configuration [SAPEngine_Application_Thread[impl:3]_23] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    Jan 31, 2005 4:11:19 PM  ...l.cache.WebResourceCache.startService [Thread[Thread-1140,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key0_1107205757104
    Feb 5, 2005 3:07:25 AM          com.sap.engine.core.configuration [Thread[Timeout Service Internal Thread,5,SAPEngine_System_Thread[impl:5]_Group]] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    Feb 5, 2005 3:02:56 PM          com.sap.engine.core.configuration [SAPEngine_System_Thread[impl:5]_78] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    Feb 6, 2005 3:03:13 PM          com.sap.engine.core.configuration [SAPEngine_System_Thread[impl:5]_77] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    Feb 19, 2005 3:15:45 AM         com.sap.engine.core.configuration [Thread[Timeout Service Internal Thread,5,SAPEngine_System_Thread[impl:5]_Group]] Fatal: Error event: java.sql.SQLException: Io exception: Connection reset by peer: socket write error
    SAP J2EE Engine Version 6.40   PatchLevel 87037.313 is shutting down!  PatchLevel 87037.313 October 19, 2004 19:52 GMT
    Stopping services.
      Service com.sap.aii.adapter.rfc.svc stopped. (439 ms)
      Service com.sap.aii.af.ispeak.svc stopped. (78 ms)
      Service com.sap.aii.adapter.marketplace.svc stopped. (15 ms)
      Service com.sap.aii.adapter.jdbc.svc stopped. (79 ms)

    Hi Sunit,
    Did you figure out what happened? We're seeing the same issue.
    Thanks,
    Jay

  • Problem with starting j2ee stack

    We have Netweaver 2004s ABAP+J2EE (Add-in). ABAP stack starts ok, but j2ee stack not :(.
    dev_jcontrol:
    [Thr 6040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 6040] INFO: Invalid property value [javaVMPath=C:\j2sdk1.4.2_09]
    [Thr 6040] INFO: Invalid property value [javaVMVersion=1.4.2_09-b05]
    [Thr 6040] INFO: Invalid property value [javaVMVendor=Java HotSpot(TM) Server VM (Sun Microsystems Inc.)]
    [Thr 6040] INFO: Invalid property value [javaVMCpu=x86]
    [Thr 6040] INFO: Invalid property value [javaVMLibPath=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin]
    [Thr 6040] INFO: Invalid property value [javaVMExePath=C:\j2sdk1.4.2_09\bin]
    [Thr 6040] *** ERROR => Main class not specified [jstartxx.c   2592]
    [Thr 6040] *** ERROR => node [bootstrap] not found [jstartxx.c   1593]
    [Thr 6040] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = -18)
    [Thr 6040] JControlCloseProgram: started (exitcode = -18)
    [Thr 6040] JControlCloseProgram: good bye... (exitcode = -18)
    instance.properties
    #bootstrap. : -
    #bootstrap. : generated VM parameters
    #bootstrap. : Thu Apr 20 14:36:35 2006
    #bootstrap. : -
    bootstrap.javaVMPath=C:\j2sdk1.4.2_09
    bootstrap.javaVMVersion=1.4.2_09-b05
    bootstrap.javaVMVendor=Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    bootstrap.javaVMType=server
    bootstrap.javaVMCpu=x86
    bootstrap.javaVMLibPath=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin
    bootstrap.javaVMExePath=C:\j2sdk1.4.2_09\bin
    And I can't understand what can be problem with java props. Any suggestion?
    Thanks in advance,
    Aliaksandr Kuchar

    Thank you Vladimir for your replies, it's very helpful.
    Actually we managed to restore properties file on our files system. And now sap mmc shows that j2ee server starts well. But we cann't connect it by http neither deafult page of server nor any other (portal f.e.), but can connect Visual Admin.
    std_server0.out
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Loading: LogManager ... 1782 ms.
    Loading: PoolManager ... 15 ms.
    Loading: ApplicationThreadManager ... 141 ms.
    Loading: ThreadManager ... 31 ms.
    Loading: IpVerificationManager ... 47 ms.
    Loading: ClassLoaderManager ... 31 ms.
    Loading: ClusterManager ... 453 ms.
    Loading: LockingManager ... 110 ms.
    Loading: ConfigurationManager ... 8281 ms.
    Loading: LicensingManager ... 47 ms.
    Loading: CacheManager ... 125 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service DQE started. (0 ms).
      Service runtimeinfo started. (32 ms).
      Service memory started. (188 ms).
      Service cross started. (172 ms).
      Service file started. (250 ms).
      Service timeout started. (219 ms).
      Service cafeuodi~mnuacc started. (0 ms).
      Service trex.service started. (31 ms).
      Service p4 started. (969 ms).
      Service classpath_resolver started. (78 ms).
      Service cafeucc~api started. (2922 ms).
      Service jmx_notification started. (93 ms).
      Service userstore started. (47 ms).
      Service log_configurator started. (8000 ms).
      Service locking started. (15 ms).
      Service naming started. (1187 ms).
      Service failover started. (78 ms).
      Service appclient started. (140 ms).
      Service javamail started. (641 ms).
      Service ts started. (609 ms).
      Service http started. (1469 ms).
      Service licensing started. (31 ms).
      Service jmsconnector started. (562 ms).
      Service connector started. (546 ms).
      Service iiop started. (656 ms).
      Service webservices started. (3625 ms).
      Service deploy started. (15578 ms).
      Service configuration started. (47 ms).
      Service MobileSetupGeneration started. (47 ms).
      Service MigrationService started. (79 ms).
      Service MobileArchiveContainer started. (63 ms).
      Service bimmrdeployer started. (0 ms).
      Service dbpool started. (2266 ms).
      Service cafeugpmailcf started. (62 ms).
      Service com.sap.security.core.ume.service started. (2578 ms).
      Service security started. (1296 ms).
      Service classload started. (156 ms).
      Service applocking started. (344 ms).
      Service shell started. (328 ms).
      Service tceCATTPingservice started. (78 ms).
      Service telnet started. (78 ms).
      Service webdynpro started. (859 ms).
      Service cafummetadata~imp started. (937 ms).
      Service ejb started. (2219 ms).
      Service servlet_jsp started. (2937 ms).
      Service dsr started. (1500 ms).
      Service developmentserver started. (2687 ms).
      Service keystore started. (3593 ms).
      Service ssl started. (78 ms).
      Service tcsecsecurestorage~service started. (562 ms).
      Service cafumrelgroups~imp started. (3297 ms).
      Service tcsecwssec~service started. (235 ms).
      Service tcsecdestinations~service started. (703 ms).
      Service pmi started. (500 ms).
      Service sld started. (2875 ms).
      Service cafruntimeconnectivity~impl started. (28656 ms).
      Service cafeugp~model started. (375 ms).
      Service tcsecvsi~service started. (1797 ms).
      Service tceujwfuiwizsvc started. (16 ms).
      service tcdisdic~srv ================= ERROR =================
      Service jmx started. (6110 ms).
      Service cafeuer~service started. (1781 ms).
      Service tc.CBS.Service started. (9578 ms).
      Service prtbridge started. (5954 ms).
      Service CUL started. (5703 ms).
      Service com.adobe~DataManagerService started. (6047 ms).
    Jun 7, 2007 3:08:03 PM   ...utilxi.prop.api.PropertySourceFactory [SAPEngine_System_Thread[impl:5]_43] Fatal: XI properties could not be initialized. Check ExchangeProfile (or aii.properties).
    Thrown:
    java.lang.Throwable: dummy Throwable for stack trace
         at com.sap.aii.utilxi.prop.api.PropertySourceFactory.getPropertySource(PropertySourceFactory.java:55)
         at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:548)
         at com.sap.aii.utilxi.misc.api.AIIProperties.<init>(AIIProperties.java:319)
         at com.sap.aii.utilxi.misc.api.AIIProperties.getInstance(AIIProperties.java:346)
         at com.sap.aii.af.service.sld.SLDAccess.syncExchangeProfile(SLDAccess.java:43)
         at com.sap.aii.af.service.cpa.impl.util.SLDReader.run(SLDReader.java:89)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
      Service apptracing started. (3125 ms).
      Service basicadmin started. (7422 ms).
      Service com.adobe~LicenseService started. (531 ms).
      Service com.adobe~DocumentServicesConfiguration started. (859 ms).
      Service adminadapter started. (3531 ms).
      Service com.sap.portal.pcd.gl started. (156 ms).
      Service com.adobe~DocumentServicesBinaries2 started. (4156 ms).
      Service com.adobe~DocumentServicesDestProtoService started. (4250 ms).
      Service com.adobe~DocumentServicesLicenseSupportService started. (3391 ms).
      Service com.adobe~TrustManagerService started. (2906 ms).
      Service jms_provider started. (14734 ms).
      Service monitor started. (6047 ms).
      Service com.sap.portal.prt.sapj2ee started. (93 ms).
      Service com.sap.aii.af.cpa.svc started. (18157 ms).
      Service com.sap.aii.af.svc started. (1640 ms).
      Service com.sap.aii.af.security.service started. (515 ms).
      Service com.sap.aii.af.ms.svc started. (672 ms).
      Service com.sap.aii.adapter.marketplace.svc started. (437 ms).
      Service com.sap.aii.adapter.jms.svc started. (765 ms).
      Service com.sap.aii.adapter.xi.svc started. (734 ms).
      Service com.sap.aii.adapter.bc.svc started. (1016 ms).
      Service com.sap.aii.adapter.mail.svc started. (610 ms).
      Service com.sap.aii.adapter.jdbc.svc started. (640 ms).
      Service com.sap.aii.adapter.rfc.svc started. (1063 ms).
      Service com.sap.aii.adapter.file.svc started. (766 ms).
      Service com.sap.aii.af.ispeak.svc started. (437 ms).
      Service com.adobe~FontManagerService started. (19078 ms).
      Service com.adobe~PDFManipulation started. (18281 ms).
      Service com.adobe~XMLFormService started. (4468 ms).
      Service tc.monitoring.logviewer started. (32672 ms).
      Service rfcengine started. (43672 ms).
    ServiceManager started for 81656 ms.
    Framework started for 93172 ms.
    SAP J2EE Engine Version 7.00   PatchLevel is running!
    PatchLevel October 23, 2006 07:41 GMT
    Could it be forced by absence of aii.property or by service tcdisdic~srv ================= ERROR =================? How could I indicate problem in more exact way?

  • Problem with running multiple servlet in same webapplication with tomcat 3

    Hi all,
    I am using Tomcat 3.0 as webserver with jdk1.3, Servlet 2.0,
    Templates for html file and oracle 8i on UNIX platform.
    I have problem with multiple servlet running same webapplication.
    There are two servlet used in my application. 1) GenServlet.class
                   and 2) ServletForPrinting.class
    All of my pages go through GenServlet.class which reads some property files
    and add header and footer in all pages.
    I want reports without header & footer that is not possible through GenServlet in my application.
    So I have used another servlet called ServletForPrinting --- just for reading html file.
    It is as follow:
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class ServletForPrinting extends HttpServlet {
    public void service (HttpServletRequest request,
    HttpServletResponse response) throws ServletException, IOException
    // set content-type header before accessing the Writer
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    File f1 = null;
    String report = null;
    String path = request.getPathInfo();
    try{
    String p = "/var/home/latif/proj/webapps/WEB-INF/classes" + path;
    System.out.println(p);
    f1 = new File(p);
    p = null;
    if (f1.exists()) {
    FileReader fr = new FileReader(f1);
    BufferedReader br = new BufferedReader(fr);
    report = new String();
    while ((report = br.readLine()) != null) {
    out.println(report);
    }catch(Exception e) {
    out.close();
    report = null;
    path = null;
    f1 = null;
    } // end class
    It works fine and display report properly.
    But now Problem is that if report is refreshed many times subsequently,
    WebServer will not take any new change in any of java file used in web-application.
    It works with the previous class only and not with updated one.
    Then I need to touch it. As soon as I touch it, webserver will take updated class file.
    Anybody has any idea regarding these situation?
    Is there any bug in my ServletForPrinting.java ?
    Any solution ????? Please suggest me.
    Suggestion from all are invited. That will help me a lot.
    Thanks in advance
    Deepalee.

    Llisas wrote:
    I solved the problem, I just had to wire the blocks in a sequential way (I still don't know why, but it works).
    Feel free to delete this topic.
    I would strongly suggest at least reading this tutorial to give you an idea of why your fix worked (or maybe only appeared to work).  Myself, I never just throw up my hands and say, "Whatever," and wash my hands of the situation without trying my best to understand just what fixed it.  Guranteed you'll run into the same/similar problem and this time your fix won't work.
    Please do yourself a favor and try to understand why it is working now, and save yourself (or more likely, the next poor dev to work on this project) some heartache.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Problems with running Photoshop CS6 and Bridge with Lightroom 4 also on the same PC

    I was running Photoshop and Bridge, then purchased Lightroom 4. Before installingt 4 I had no problems with Bridge, but since installing 4 all of the photo's that were held in bridge are now gone, but they are in Lightroom. With Lightroom, you are able to edit photos out of Lightroom and into Photoshop when necessary, save and close and it automatically changed the Lightroom picture.
    I have two PC's, one has Bridge on it (this one) and the other without, but both have both editing prgrams installed. On the other PC I can switch between Lightroom and Photoshop with no problems, but when I try to switch with this PC, the one with Bridge installed, it will open Photoshop, but the photo will not transfer. If I close Photoshop program and go back to Lightroom, it will tell me that the picture could not be transfered to Photoshop because it would not launch. If I close that message window, it will then launch Photoshop and the picture transferes over allowing me to edit and save as normal.
    My question is; does anyone know if Lightroom and Bridge should run side by side, or should I delete Bridge from this PC and see what happens. Bridge is just a holder and organizer of photos, wherease Lightroom does the same, but also has post editing capabilities. The two programs seem redundant, but if your running Photoshop, it's hard to get files out of Lightroom. It seems that you need to open Lightroom first, then you can view and chose a photo to work on, then move it back and forth between the two programs. This seems to make Bridge redundant.
    Thanks for any help or suggestions.
    he_b_gb1947

    Hi, Yes, but that actually wasn't the problem. I start out in Lightroom,
    then move to Photoshop if I have something that can't be fixed in
    Lightroom. The problem was that when I tried to edit, out of Lightroom and
    into Photoshop, I was getting an error message that Lightroom couldn't
    prepare files for transfer because Photoshop wouldn't open. But, it had
    opened, the picture just wouldn't transfer. If I closed Photoshop,
    Lightroom would try again and it would open and transfer the second time. I
    ended up going to the Adobe help, chat line, and they looked into my PC and
    located the problem, it's now working fine. Thanks to everyone for your
    inputs. Most appreciated.
    Gary

  • Problem with running StageVideo

    Hi.
    I've got a problem with displaying a video in a stagevideo layer. I recently finished a project which involved a video background. Because the video is quite large (1400x572) and takes a lot of memory/CPU, I decided to run it in a StageVideo layer. After a series of testing, me and my animator, decided to use a FLV format. All was fine, until the last update. Client has came to me, that the video in a background in extremly bright.
    1. The problem exists in all browsers, running regular flash player 11,2,202,229 or 11,2,202,228.
    2. When I use a debugger version of flash player all works great - although I might have not used the latest version (uninstalled and didn't note it).
    3. When I reverted to 11,2,102,63, the problem disapeared - it looks like it came with the latest update.
    4. The problem occurs only if i use video in .flv format. f4v or mp4 version of the same video displays regular.
    Below is a screen of the problem. Mind, that the saxophone gay on the right is also a video in FLV format, but embedded not in a stage video, but as regular video in a container on the stage. And it displays normal. Problem occurs only in a stagevideo.
    I've found some comments on other bugs related to video in latest updates, but they seem to be different - green screens or strips or strage colors. Nothing related to brightness or gamma.
    Note: I need to use the FLV format. If I use F4V or MP4 format, I've got problems with looping a part of the video. It has an intro (0-14 sec), then loop part (14-15 sec) and ending (15-18 sec). In f4v or mp4 despite that I jump from 15 to 14 sec (in a loop), somehow it jumps from 14 to 13 or even from and to another moments in the video. And, in addition, it stops for like 2-3 frames.
    That's for your help.
    Lucjan Michałowski.

    Me again...
    I forgot to mention few things:
    1. The problem occurs on all computers and all browsers. I had access only to PCs running Windows 7, so ATM can't tell if it occurs on ealier versions of Windows. On MAC, as my friend reported, the problem is not only with FLV, but with F4V as well. However it's doesn't seem to be hardware related.
    2. When I switch to regular video (in a container on a stage) it works well, but it slows the site too much to use it as a reliable solution.
    Can anyone comment on it please? Is it a bug... or feature? Is there any way to fix this, or work around (make other movie formats work)?

  • Problem with running rhcl.exe in batch file

    Hi,
    I'm running Robohelp 8 and trying to use rhcl.exe to generate multiple help projects. I'm having a problem with the folder where the rhcl.exe is generating the web help. It seems to ignore the "-o" switch and gets the generation folder from the project all the time. As you can see from the log file below, the exe appears to pick up the "-o" path  (......\Test\Opportunities.htm), but writes the generated files to the path in the project (.....\Opportunities\index.htm).
    Anyone else come across this problem?
    MY BATCH FILE IS:
    "C:\Program Files\Adobe\Adobe RoboHelp 8\RoboHTML\rhcl.exe" "C:\Data\RoboHelp\RoboHelp Projects\SubProjects\SupplierPortal\Opportunities\Opportunities.xpj" -l Webhelp -o "C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Test" -g "C:\Data\RoboHelp\GeneratedWebHelp\Generate.log"
    THE LOG FILE CREATED IS:
    Adobe (R) RoboHelp Project Command Line Compiler version 8.0.0.203
    Copyright (C) 2006-2007, Adobe Systems Incorporated and its licensors. All rights reserved.
    Project: C:\Data\RoboHelp\RoboHelp Projects\SubProjects\SupplierPortal\Opportunities\Opportunities.xpj
    Layout: WebHelp.
    Output: C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Test\Opportunities.htm.
    Scanning project for compilation....
    Scanning finished.
    Warning: No baggage file description.
    Starting compilation...
    WebHelp preprocessor 8.0.0.203
    Compiling C:\Data\RoboHelp\GeneratedWebHelp\SupplierPortal\mergedProjects\Opportunities\index.htm ...
    Preparing to create WebHelp...
    Clearing output folder...
    Preparing files for WebHelp...
    Copying files...
    Updating files...
    Finished preparing in 1 sec(s)
    Initializing compiler...
    Generating WebHelp 5.50 (8.0.0.203)...
    Processing TOC data...
    Processing Context-sensitive-Help data...
    Updating HTML topics...
    Updating opportunities/e-auctions/how_do_i/creating_a_new_bid.htm...
    Updating opportunities/e-auctions/how_do_i/creating_a_response.htm...
    Updating opportunities/e-auctions/how_do_i/viewing_auction_details.htm...
    Updating opportunities/e-auctions/how_do_i/viewing_bid_details.htm...
    Updating opportunities/e-auctions/how_do_i/viewing_a_list_of_auctions.htm...
    Updating opportunities/e-auctions/how_do_i/withdrawing_from_an_auction.htm...
    Updating opportunities/e-auctions/screen_level_help/list_of_auctions.htm...
    Updating opportunities/e-auctions/screen_level_help/new_bid.htm...
    Updating opportunities/e-auctions/screen_level_help/view_auction_details.htm...
    Updating opportunities/e-auctions/screen_level_help/view_bid_details.htm...
    Updating opportunities/e-auctions/introduction_to_e-auctions.htm...
    Updating opportunities/introduction_to_opportunities.htm...
    Finished updating HTML topics in 0 sec(s) : total 12 topic(s).
    Processing Full-text-search data...
    Finished processing Full-Text-Search data in 0 sec(s)
    Applying WebHelp 5.50 Template...
    Finished applying Template in 1 sec(s)
    Processing Mark of the Web...
    Finished compiling WebHelp in 3 sec(s)
    Compilation complete.

    Hi again
    And that's why we call them bugs.
    Did you remember to report it as same to Adobe? The link is in my sig.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Problem with running sample code from XML Schema Processor for Java

    Hi there,
    I downloaded the XML Schema Processor for Java and tried it out. Unfortunately, it failed at the first step. FYI, I included all xmlparserv2.jar and xmlschema.jar in my classpath.
    I compiled XSDSample.java with a warning: XSDSample.java uses a deprecated API. Recompile with "-deprecation" for details. There was no problem with compiling XSDSetSchema.java.
    When I tried to run report.xml by typing java XSDSample report.xml, I got Parsing report.xml
    NonParserException: null.
    I guess that report.xml from the sample is not valid.
    Could any one give me a hint? Any suggestion would be greatly appreciated.
    ---Denali
    null

    Please post this message at:
    Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

  • Problems with running a scipt in SuSE Linux

    Hiya,
    Need some help please. I'm writing an application in SuSE linux and I'm having trouble porting it over from my SuSE 9.1 Pro desktop - to my SuSE 9.2 laptop.
    I'll try and keep it as brief and simple as possible so here goes;
    Firstly, everything works perfectly on my desktop which is running SuSE 9.1 Pro (which the program was written in)
    The problem is running the exact same code on my laptop which is running SuSE 9.2 Pro.
    The line of code that is causing me the problem is this:
    Runtime.getRuntime().exec("bash -c /home/bryan/.annwn/scripts/annwnCommand.gmt");As you can see, all I'm trying to do is run a simple script (that will execute a bunch of commands and create an image.)
    Now, this code works perfectly when run on my desktop - but will not run on my laptop.
    When I try to run the code with my program on my laptop, nothing happens. However, if I run this on the command line:
    bash -c /home/bryan/.annwn/scripts/annwnCommand.gmtThe script is run - It works pefectly. It also works on the command line if I just do:
    /home/bryan/.annwn/scripts/annwnCommand.gmtThe only difference in my development environment is SuSE 9.2 over SuSE 9.1 - but I cannot see how this would affect this command not running from within my application.
    So, can you see any reason at all why the command would work perfectly on SuSE 9.1 (and through my application), and perfectly on the command line of SuSE 9.2 - but not when run through my application?
    I know it's a long shot, and it's a pretty vague problem - but if you can think of anything. I'd be very, very grateful.
    Hope this makes sense!
    Many thanks!

    Thanks.
    I'm running both applications as the same user. All other aspects of the application and code work perfectly - just running that script using the Runtime method.
    Basically, everything is exactly the same between to the two machines - only the difference in OS version.
    I'm guessing that it well may be a Linux problem, sorry if this is the wrong forum. I'm just at a complete loss with this!

Maybe you are looking for

  • FCP 7 - Multiple formats on same Timeline

    I am wondering about a new feature on FCP 7 regarding formats. My client has 1440 x 1080 HDV as well as SD (720 x 480 4 x3). My question is this - will the 4 x 3 SD footage automatically resize/reshape for the HDV footage or will the HDV footage resh

  • Communication errors when iPod 2nd gen connected to car stereo

    So a while back I ultimately decided to update my 2nd gen iPod touch from iOS 3.1.3 to the highest it'll support, which I believe is iOS 4.2.1. The update went fine, and everything seemed to be working alright until I plugged it into my car's stereo

  • How to open a Word 2003 from a Word 2010 document?

    Hello, I am a transcriptionist and I use a word expander but it only works in Word 2003. I have some documents from a new client who uses Word 2010. When I get the files I need to open them in Word 2003 because I need to type in using my word expande

  • Print presets not saving

    I never got very good results from printing in Aperture 2, but Aperture 3 seems to have fixed most of my outstanding issues. So I was trying to set up some print presets. Unfortunately, I create a new preset, select Save Preset from the gear menu and

  • TS1292 I bought a itunes card and the error says it has not be actived correctly

    itunes card was incorrctly actived and wondering how to get the card fixed